cube systems - Architectural Components Group
CUBE SYSTEMS Continuous Series 1 & 2 ACGI Cube Systems come in a variety of cell sizes, wood thicknesses and depths. Depending on project requirements, Cube panels can be factory or field-cut to size. Fixture cut-outs can be factory cut, but are typically cut to field conditions. Cube-Continuous Series 1 [CC1] uses a wooden grid where panels connect via a “lap” joint. The series utilizes panels in 2'x2', 2'x4' or 4'x4' configurations that lay into one of three grid systems which produce an uninterrupted appearance across the ceiling area. Cube-Continuous Series 2 [CC2] uses a 3⁄8" wooden grid with panels set into the grid via metal brackets. Perimeter conditions may require reveals to be placed between the panels and the structure. If the cubes are used in an island or floating configuration, vertical wood trim around the perimeter for both radius and straight profiles is available in matching or complimentary wood species and finishes.
Series 1 Wood Main Runner (doweled at joints)
Wood Main Runner
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
v2.0
v2.0
Cube-Continuous Series 1 & 2 — Specification Information Depth
Product No.
Suspension Method
(Below Grid)
CC1-#### CC2-####
Wood Main Runners Wood Main Runners
Flush Flush
Typical Strip Width 9⁄16" 3⁄8"
Cell Size
Depth
Panel Sizes
Up to 12" Up to 12"
Up to 3" Up to 3"
2'x2', 2'x4', 4'x4' 2'x2', 2'x4', 4'x4'
How To Spec It... Blade Depth Series
Series 2 Wood Main Runner (doweled at joints)
CC1-4200 Spacing What It Means... Cube-Continuous Series 1 panel with 4" cells and 2" blade depth.
Suspension Clip
Wood Main Runner
LEED CREDIT MR 4.1, MR 4.2, MR 7, EQ 4.4 WOOD SPECIES Cube-Continuous panels are available in a large variety of wood veneers to meet design requirements. FINISHES Cube-Continuous panels can be finished in any of our standard finish options or custom finishes. FIRE RATING Our veneered products can be provided with a Class A rated core [ASTM-E84]. DELIVERY, STORAGE & HANDLING Material must be stored and installed only in secured ambient environment (humidity range 25%–55%, temperature not to exceed 86°F). All windows, doors and wet-work must be complete before installation. Handle carefully to avoid damaging. WARRANTY All materials supplied by ACGI are guaranteed against manufacturing defects for one year. Wood stains and colorings can vary over time due to job site conditions and are therefore excluded from this warranty. The contractor shall warrant for one year all work from final acceptance of completed work. © 2012 Architectural Components Group, Inc. All Rights Reserved. Information provided is accurate at time of printing. ACGI reserves the right to modify any materials without further notification. All product applications are suggestion only. Always conform with local building codes and safety conditions. ACGI does not accept responsibility for the misuse or improper installation of products. Visit ACGIwood.com for more details. Printed in U.S.A.
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
Series 1 Wood Main Runner (doweled at joints)
Wood Main Runner
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
v2.0
v2.0
Cube-Continuous Series 1 & 2 — Specification Information Depth
Product No.
Suspension Method
(Below Grid)
CC1-#### CC2-####
Wood Main Runners Wood Main Runners
Flush Flush
Typical Strip Width 9⁄16" 3⁄8"
Cell Size
Depth
Panel Sizes
Up to 12" Up to 12"
Up to 3" Up to 3"
2'x2', 2'x4', 4'x4' 2'x2', 2'x4', 4'x4'
How To Spec It... Blade Depth Series
Series 2 Wood Main Runner (doweled at joints)
CC1-4200 Spacing What It Means... Cube-Continuous Series 1 panel with 4" cells and 2" blade depth.
Suspension Clip
Wood Main Runner
LEED CREDIT MR 4.1, MR 4.2, MR 7, EQ 4.4 WOOD SPECIES Cube-Continuous panels are available in a large variety of wood veneers to meet design requirements. FINISHES Cube-Continuous panels can be finished in any of our standard finish options or custom finishes. FIRE RATING Our veneered products can be provided with a Class A rated core [ASTM-E84]. DELIVERY, STORAGE & HANDLING Material must be stored and installed only in secured ambient environment (humidity range 25%–55%, temperature not to exceed 86°F). All windows, doors and wet-work must be complete before installation. Handle carefully to avoid damaging. WARRANTY All materials supplied by ACGI are guaranteed against manufacturing defects for one year. Wood stains and colorings can vary over time due to job site conditions and are therefore excluded from this warranty. The contractor shall warrant for one year all work from final acceptance of completed work. © 2012 Architectural Components Group, Inc. All Rights Reserved. Information provided is accurate at time of printing. ACGI reserves the right to modify any materials without further notification. All product applications are suggestion only. Always conform with local building codes and safety conditions. ACGI does not accept responsibility for the misuse or improper installation of products. Visit ACGIwood.com for more details. Printed in U.S.A.
Architectural Components Group, Inc.
(417) 869-6777
[email protected]
