D1810 Series - Interlogix
TH
† May be extended to condensation conditions by adding su number for conformal coating.
850 nm, Multimode
F FIBERS®
2
IFS Line / Fiber Transmission
RS ST
wer:
Terminal Plug with screw clamps
D1810 Series
AL & MECHANICAL
IFS Bi-Directional Contact Closure24Transceiver VAC C.T. @ 150 mA From Rack
k Slots: on:
1 Automatic Resettable Solid-State Current Limiters
AGENCY COMPLIANCE
Meets IPC Standard
LxWxH): 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm. OVERVIEW 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm.
t:
The IFS D1810 Series contact closure transceiver provides one-way < 2transmission lbs./0.9 kg or bi-directional of contact closure over one or two multimode optical fibers. The transceiver has a contact input and a 0.5amp contact output. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive status indicating LED’s for monitoring confirmation of contact closure. The modules are available in either stand-alone or rack mount versions.
POWER BUDGET
APPLICATION EXAMPLES WAVELENGTH MODEL
Federal Supply
STANDARD MADE INFEATURES THE USA
Contract No. GS
Complies FDA Performance Standard for Lase Transmits a Single with Contact Closure in One or Two Directions Title 21, Code of Federal Regulations, Subchapter Distances up to 2.5 Miles (4 km) 24 VDC, 0.5 Amp Relay Output, Normally Open Point-to-Point Transmission Architecture Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. • No In-field Electrical or Optical Adjustments Required • Power, Transmit and Receive Status LED Indicators • Hot-Swappable Rack Modules • Automatic Resettable Solid-State Current Limiters 1 µw 14 dB • Contact Input • Comprehensive Lifetime Warranty (-30 dBm) • • • • •
TRANSCEIVER SENSITIVITY OUTPUT
OPTICAL PWR BUDGET
• Alarm Event Triggering • Building Automation and Environmental Control Systems • Fire nm & Alarm Systems D1810 850 25 µw • Gate control (-16 dBm) • PIR signal Transmission • TrafficisSignal Control Equipment ission distance limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
DESIGN
1 Contact in
1 Contact out
D1810
up to 2.5 miles (4 km)
D1810
ifs
ifs 2 Fibers 62.5/125µm MM
1 Contact out
1 Contact in
interlogix.com
D1810 Series
North America T 855-286-8889
Latin America T 561-998-6114
IFS Bi-Directional Contact Closure Transceiver
Ordering Information Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
D1810
Bi-Directional Contact Closure Transceiver (850 nm)
2
14 dB
2.5 miles (4 km)
Accessories ♦
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured.
Specifications Data Contact Interface:
Response Time: 0.5 msec
Input:
Dry Contact closure
Output
SPST Relay, 0.5 A Contact rating, normally open
Wavelength 850 nm, Multimode Number Of Fibers 2 Connectors Optical:
ST
Contacts and Power:
Terminal Plug with screw clamps
Electrical & Mechanical Power:
GE Security North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566 E [email protected] Asia T 852-2907-8108 F 852-2142-5063 Australia and New Zealand T 613-9239-1200 F 613-9239-1299
Surface Mount:
12VDC @ 200mA
Rack:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Latin America T 305-593-4301 F 305-593-4300
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
gesecurity.com/ifs
Rack Mount:
7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm.
Shipping Weight:
< 2 lbs./0.9 kg
Size (in./cm.) (LxWxH)
Europe T 44-113-238-1668 F 44-113-253-8121
Specifications subject to change without notice
Agency Compliance
Environmental MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
© 2008 General Electric Company Complies with FDA Performance All Rights Reserved Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Made in the USA Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Ordering Information Part Number D1010 interlogix.com
D1010WDMA✧ Multimode D1010WDMB 62.5/125µm** Specifications subject to change without notice.
D1020 © 2013 United Technologies Corporation All rights reserved. D1030 Interlogix is part of UTC Building & Industrial Systems, ✧ Single Mode D1030WDMA a unit of United Technologies Corporation. 9/125µm D1030WDMB
De
RS RS RS RS
RS RS RS
D1810
Accessories♦
PS-12VDC 12 Volt DC Plu PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
† May be extended to condensation conditions by adding su number for conformal coating.
850 nm, Multimode
F FIBERS®
2
IFS Line / Fiber Transmission
RS ST
wer:
Terminal Plug with screw clamps
D1810 Series
AL & MECHANICAL
IFS Bi-Directional Contact Closure24Transceiver VAC C.T. @ 150 mA From Rack
k Slots: on:
1 Automatic Resettable Solid-State Current Limiters
AGENCY COMPLIANCE
Meets IPC Standard
LxWxH): 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm. OVERVIEW 7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm.
t:
The IFS D1810 Series contact closure transceiver provides one-way < 2transmission lbs./0.9 kg or bi-directional of contact closure over one or two multimode optical fibers. The transceiver has a contact input and a 0.5amp contact output. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates power and transmit/receive status indicating LED’s for monitoring confirmation of contact closure. The modules are available in either stand-alone or rack mount versions.
POWER BUDGET
APPLICATION EXAMPLES WAVELENGTH MODEL
Federal Supply
STANDARD MADE INFEATURES THE USA
Contract No. GS
Complies FDA Performance Standard for Lase Transmits a Single with Contact Closure in One or Two Directions Title 21, Code of Federal Regulations, Subchapter Distances up to 2.5 Miles (4 km) 24 VDC, 0.5 Amp Relay Output, Normally Open Point-to-Point Transmission Architecture Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. • No In-field Electrical or Optical Adjustments Required • Power, Transmit and Receive Status LED Indicators • Hot-Swappable Rack Modules • Automatic Resettable Solid-State Current Limiters 1 µw 14 dB • Contact Input • Comprehensive Lifetime Warranty (-30 dBm) • • • • •
TRANSCEIVER SENSITIVITY OUTPUT
OPTICAL PWR BUDGET
• Alarm Event Triggering • Building Automation and Environmental Control Systems • Fire nm & Alarm Systems D1810 850 25 µw • Gate control (-16 dBm) • PIR signal Transmission • TrafficisSignal Control Equipment ission distance limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
DESIGN
1 Contact in
1 Contact out
D1810
up to 2.5 miles (4 km)
D1810
ifs
ifs 2 Fibers 62.5/125µm MM
1 Contact out
1 Contact in
interlogix.com
D1810 Series
North America T 855-286-8889
Latin America T 561-998-6114
IFS Bi-Directional Contact Closure Transceiver
Ordering Information Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
D1810
Bi-Directional Contact Closure Transceiver (850 nm)
2
14 dB
2.5 miles (4 km)
Accessories ♦
PS12VDC1.5A-U 12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ♦ All accessories are third party manufactured.
Specifications Data Contact Interface:
Response Time: 0.5 msec
Input:
Dry Contact closure
Output
SPST Relay, 0.5 A Contact rating, normally open
Wavelength 850 nm, Multimode Number Of Fibers 2 Connectors Optical:
ST
Contacts and Power:
Terminal Plug with screw clamps
Electrical & Mechanical Power:
GE Security North America T 888-GE-SECURITY 888-437-3287 F 503-691-7566 E [email protected] Asia T 852-2907-8108 F 852-2142-5063 Australia and New Zealand T 613-9239-1200 F 613-9239-1299
Surface Mount:
12VDC @ 200mA
Rack:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Latin America T 305-593-4301 F 305-593-4300
Surface Mount:
7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm
gesecurity.com/ifs
Rack Mount:
7.0 x 4.9 x 2.0 in., 17.8 x 12.5 x 5.0 cm.
Shipping Weight:
< 2 lbs./0.9 kg
Size (in./cm.) (LxWxH)
Europe T 44-113-238-1668 F 44-113-253-8121
Specifications subject to change without notice
Agency Compliance
Environmental MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
© 2008 General Electric Company Complies with FDA Performance All Rights Reserved Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Made in the USA Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
Ordering Information Part Number D1010 interlogix.com
D1010WDMA✧ Multimode D1010WDMB 62.5/125µm** Specifications subject to change without notice.
D1020 © 2013 United Technologies Corporation All rights reserved. D1030 Interlogix is part of UTC Building & Industrial Systems, ✧ Single Mode D1030WDMA a unit of United Technologies Corporation. 9/125µm D1030WDMB
De
RS RS RS RS
RS RS RS
D1810
Accessories♦
PS-12VDC 12 Volt DC Plu PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
