Data Center Products
POWER DISTRIBUTION PANEL
BACKUP GENERATOR
www.burndy.com FCI-BURNDY® PRODUCTS
UTILITY TRANSFORMER
CALL 1-800-346-4175 FOR YOUR LOCAL SALES REPRESENTATIVE
Customer Service Dept. 7 Aviation Park Drive Londonderry, NH 03053 1-800-346-4175 Canada 1-800-361-6975 (Quebec) 1-800-387-6487 (All Other Provinces)
Applicable products for above applications.
Mexico 011-52-722-265-4400 Brazil 011-55-11-5515-7200 Tool Repair Center Littleton Industrial Park Littleton, NH 03561 1-800-426-8720
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
Experience. Technology. Answers.
Data Center Products Raised Floor Grounding
Experience. Technology. Answers.
TYPE GP GROUND CONNECTOR For Two Copper Cables to Rod or Pipe
BATTERY BACKUP
High copper alloy ground connector for joining a range of parallel cables perpendicular to rod, pipe or column. Also used with one groove for run, the other for tap to equipment. High copper alloy cast body and DURIUM™ U-bolts, nuts, and lockwashers make the GP suitable for direct burial in the ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Number
Conductor Tube I.P.S.
Rod Size or O.D. Range
GP644C GP6426
Cable 8 Sol. - 4 Str.
3/8
5/8 - 3/4
4 Sol. - 2/0 Str.
GP6429
2/0 Sol. - 250
GP144C
8 Sol. - 4 Str.
GP1426
1/2 - 3/4
7/8 - 1
4 Sol. - 2/0 Str.
GP1429 GP164C GP1629 GP1726 GP184C GP1826
A/C SERVICE ENTRANCE
UNINTERRUPTIBLE POWER SUPPLY
3/0 Sol. - 250 1-1/4
1-3/8 - 1-1/2
1-1/2
1-5/8 - 1-7/8
2
2 - 2-3/8
8 Sol. - 4 Str. 2/0 Sol. - 250 4 Sol. - 2/0 Str. 8 Sol. - 4 Str. 4 Sol. - 2/0 Str.
TYPE GRF UNIGROUND™ RAISED FLOOR GROUNDING CONNECTOR
TYPE GP
The BURNDY® UNIGROUND™ is a universal grounding clamp, specifically designed for all raised flooring systems. It can be installed on round or square pedestals and can accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. Number of Conductors
Conductor Size sol. & str.
Round
Square
GRF4C-3
1 or 2
#8 - #2
Up to 1”
Up to 1”
Features and Benefits n One connector fits all applications.
• Ease of specification and installation.
n Single bolt design.
• Ease of installation. • No need to disassemble. • Single wrench installation. n Accepts 1 or 2 ground conductors. • Requires less connectors to install signal reference grid. n Tin plated cast bronze construction.
• Resists corrosion and provides extended life ground connection. n Grounds all pedestals (round or square). Will handle up to 1” square and 1” round. • Ease of installation. One connector does it all. n FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
TYPE GP-G1
TYPE GRF
Applicable products for above applications.
FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground Solves all possible application problems found in today’s projects.
Pedestal Type
Catalog Number
AUTOMATIC TRANSFER SWITCH
TYPES GP-G1, GP-RT RAISED FLOOR GROUNDING CLAMPS High copper alloy ground connector for raised floor computer grounding applications. These connectors can be installed on round or square pedestal applications and will accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. In addition we offer the GP1726RT, which is especially designed for penetrating epoxy paint on pedestals. This connector offers a low impedance, time saving connection between conductors and the pedestal.
Features and Benefits
Pedestal Type
Catalog Number
Number of Conductors
Conductor Size sol. & str.
Round or Square
• Requires less connectors to install signal reference grid.
GP654CG1
1 or 2
#8 sol. - 4 str.
3/4” - 1” Round
n Made of copper alloy. n DURIUM™ U-Bolts, nuts and lockwashers.
GP64526G1
1 or 2
#4 sol. - 2/0 str.
3/4” - 1” Square
GP1526G1
1 or 2
#4 sol. - 2/0 str.
1-1/4” Round
GP1726RT
1 or 2
#6 sol. - 2/0 str.
2” Round
n Accepts 1 or 2 ground conductors
• Provides a low impedance ground path for maximum performance. n Grounds all pedestals (round or square). n Will handle from 3⁄4” to 1” round or square. • Ease of installation. n FCI-BURNDY® Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
TYPE GP GROUND CONNECTOR For Two Copper Cables to Rod or Pipe
BATTERY BACKUP
High copper alloy ground connector for joining a range of parallel cables perpendicular to rod, pipe or column. Also used with one groove for run, the other for tap to equipment. High copper alloy cast body and DURIUM™ U-bolts, nuts, and lockwashers make the GP suitable for direct burial in the ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Number
Conductor Tube I.P.S.
Rod Size or O.D. Range
GP644C GP6426
Cable 8 Sol. - 4 Str.
3/8
5/8 - 3/4
4 Sol. - 2/0 Str.
GP6429
2/0 Sol. - 250
GP144C
8 Sol. - 4 Str.
GP1426
1/2 - 3/4
7/8 - 1
4 Sol. - 2/0 Str.
GP1429 GP164C GP1629 GP1726 GP184C GP1826
A/C SERVICE ENTRANCE
UNINTERRUPTIBLE POWER SUPPLY
3/0 Sol. - 250 1-1/4
1-3/8 - 1-1/2
1-1/2
1-5/8 - 1-7/8
2
2 - 2-3/8
8 Sol. - 4 Str. 2/0 Sol. - 250 4 Sol. - 2/0 Str. 8 Sol. - 4 Str. 4 Sol. - 2/0 Str.
TYPE GRF UNIGROUND™ RAISED FLOOR GROUNDING CONNECTOR
TYPE GP
The BURNDY® UNIGROUND™ is a universal grounding clamp, specifically designed for all raised flooring systems. It can be installed on round or square pedestals and can accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. Number of Conductors
Conductor Size sol. & str.
Round
Square
GRF4C-3
1 or 2
#8 - #2
Up to 1”
Up to 1”
Features and Benefits n One connector fits all applications.
• Ease of specification and installation.
n Single bolt design.
• Ease of installation. • No need to disassemble. • Single wrench installation. n Accepts 1 or 2 ground conductors. • Requires less connectors to install signal reference grid. n Tin plated cast bronze construction.
• Resists corrosion and provides extended life ground connection. n Grounds all pedestals (round or square). Will handle up to 1” square and 1” round. • Ease of installation. One connector does it all. n FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
TYPE GP-G1
TYPE GRF
Applicable products for above applications.
FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground Solves all possible application problems found in today’s projects.
Pedestal Type
Catalog Number
AUTOMATIC TRANSFER SWITCH
TYPES GP-G1, GP-RT RAISED FLOOR GROUNDING CLAMPS High copper alloy ground connector for raised floor computer grounding applications. These connectors can be installed on round or square pedestal applications and will accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. In addition we offer the GP1726RT, which is especially designed for penetrating epoxy paint on pedestals. This connector offers a low impedance, time saving connection between conductors and the pedestal.
Features and Benefits
Pedestal Type
Catalog Number
Number of Conductors
Conductor Size sol. & str.
Round or Square
• Requires less connectors to install signal reference grid.
GP654CG1
1 or 2
#8 sol. - 4 str.
3/4” - 1” Round
n Made of copper alloy. n DURIUM™ U-Bolts, nuts and lockwashers.
GP64526G1
1 or 2
#4 sol. - 2/0 str.
3/4” - 1” Square
GP1526G1
1 or 2
#4 sol. - 2/0 str.
1-1/4” Round
GP1726RT
1 or 2
#6 sol. - 2/0 str.
2” Round
n Accepts 1 or 2 ground conductors
• Provides a low impedance ground path for maximum performance. n Grounds all pedestals (round or square). n Will handle from 3⁄4” to 1” round or square. • Ease of installation. n FCI-BURNDY® Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
TYPE GP GROUND CONNECTOR For Two Copper Cables to Rod or Pipe
BATTERY BACKUP
High copper alloy ground connector for joining a range of parallel cables perpendicular to rod, pipe or column. Also used with one groove for run, the other for tap to equipment. High copper alloy cast body and DURIUM™ U-bolts, nuts, and lockwashers make the GP suitable for direct burial in the ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Number
Conductor Tube I.P.S.
Rod Size or O.D. Range
GP644C GP6426
Cable 8 Sol. - 4 Str.
3/8
5/8 - 3/4
4 Sol. - 2/0 Str.
GP6429
2/0 Sol. - 250
GP144C
8 Sol. - 4 Str.
GP1426
1/2 - 3/4
7/8 - 1
4 Sol. - 2/0 Str.
GP1429 GP164C GP1629 GP1726 GP184C GP1826
A/C SERVICE ENTRANCE
UNINTERRUPTIBLE POWER SUPPLY
3/0 Sol. - 250 1-1/4
1-3/8 - 1-1/2
1-1/2
1-5/8 - 1-7/8
2
2 - 2-3/8
8 Sol. - 4 Str. 2/0 Sol. - 250 4 Sol. - 2/0 Str. 8 Sol. - 4 Str. 4 Sol. - 2/0 Str.
TYPE GRF UNIGROUND™ RAISED FLOOR GROUNDING CONNECTOR
TYPE GP
The BURNDY® UNIGROUND™ is a universal grounding clamp, specifically designed for all raised flooring systems. It can be installed on round or square pedestals and can accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. Number of Conductors
Conductor Size sol. & str.
Round
Square
GRF4C-3
1 or 2
#8 - #2
Up to 1”
Up to 1”
Features and Benefits n One connector fits all applications.
• Ease of specification and installation.
n Single bolt design.
• Ease of installation. • No need to disassemble. • Single wrench installation. n Accepts 1 or 2 ground conductors. • Requires less connectors to install signal reference grid. n Tin plated cast bronze construction.
• Resists corrosion and provides extended life ground connection. n Grounds all pedestals (round or square). Will handle up to 1” square and 1” round. • Ease of installation. One connector does it all. n FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
TYPE GP-G1
TYPE GRF
Applicable products for above applications.
FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground Solves all possible application problems found in today’s projects.
Pedestal Type
Catalog Number
AUTOMATIC TRANSFER SWITCH
TYPES GP-G1, GP-RT RAISED FLOOR GROUNDING CLAMPS High copper alloy ground connector for raised floor computer grounding applications. These connectors can be installed on round or square pedestal applications and will accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. In addition we offer the GP1726RT, which is especially designed for penetrating epoxy paint on pedestals. This connector offers a low impedance, time saving connection between conductors and the pedestal.
Features and Benefits
Pedestal Type
Catalog Number
Number of Conductors
Conductor Size sol. & str.
Round or Square
• Requires less connectors to install signal reference grid.
GP654CG1
1 or 2
#8 sol. - 4 str.
3/4” - 1” Round
n Made of copper alloy. n DURIUM™ U-Bolts, nuts and lockwashers.
GP64526G1
1 or 2
#4 sol. - 2/0 str.
3/4” - 1” Square
GP1526G1
1 or 2
#4 sol. - 2/0 str.
1-1/4” Round
GP1726RT
1 or 2
#6 sol. - 2/0 str.
2” Round
n Accepts 1 or 2 ground conductors
• Provides a low impedance ground path for maximum performance. n Grounds all pedestals (round or square). n Will handle from 3⁄4” to 1” round or square. • Ease of installation. n FCI-BURNDY® Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
POWER DISTRIBUTION PANEL
BACKUP GENERATOR
www.burndy.com FCI-BURNDY® PRODUCTS
UTILITY TRANSFORMER
CALL 1-800-346-4175 FOR YOUR LOCAL SALES REPRESENTATIVE
Customer Service Dept. 7 Aviation Park Drive Londonderry, NH 03053 1-800-346-4175 Canada 1-800-361-6975 (Quebec) 1-800-387-6487 (All Other Provinces)
Applicable products for above applications.
Mexico 011-52-722-265-4400 Brazil 011-55-11-5515-7200 Tool Repair Center Littleton Industrial Park Littleton, NH 03561 1-800-426-8720
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
Experience. Technology. Answers.
Data Center Products Raised Floor Grounding
Experience. Technology. Answers.
POWER DISTRIBUTION PANEL
BACKUP GENERATOR
www.burndy.com FCI-BURNDY® PRODUCTS
UTILITY TRANSFORMER
CALL 1-800-346-4175 FOR YOUR LOCAL SALES REPRESENTATIVE
Customer Service Dept. 7 Aviation Park Drive Londonderry, NH 03053 1-800-346-4175 Canada 1-800-361-6975 (Quebec) 1-800-387-6487 (All Other Provinces)
Applicable products for above applications.
Mexico 011-52-722-265-4400 Brazil 011-55-11-5515-7200 Tool Repair Center Littleton Industrial Park Littleton, NH 03561 1-800-426-8720
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
Experience. Technology. Answers.
Data Center Products Raised Floor Grounding
Experience. Technology. Answers.
BACKUP GENERATOR
www.burndy.com FCI-BURNDY® PRODUCTS
UTILITY TRANSFORMER
CALL 1-800-346-4175 FOR YOUR LOCAL SALES REPRESENTATIVE
Customer Service Dept. 7 Aviation Park Drive Londonderry, NH 03053 1-800-346-4175 Canada 1-800-361-6975 (Quebec) 1-800-387-6487 (All Other Provinces)
Applicable products for above applications.
Mexico 011-52-722-265-4400 Brazil 011-55-11-5515-7200 Tool Repair Center Littleton Industrial Park Littleton, NH 03561 1-800-426-8720
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
Experience. Technology. Answers.
Data Center Products Raised Floor Grounding
Experience. Technology. Answers.
TYPE GP GROUND CONNECTOR For Two Copper Cables to Rod or Pipe
BATTERY BACKUP
High copper alloy ground connector for joining a range of parallel cables perpendicular to rod, pipe or column. Also used with one groove for run, the other for tap to equipment. High copper alloy cast body and DURIUM™ U-bolts, nuts, and lockwashers make the GP suitable for direct burial in the ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Number
Conductor Tube I.P.S.
Rod Size or O.D. Range
GP644C GP6426
Cable 8 Sol. - 4 Str.
3/8
5/8 - 3/4
4 Sol. - 2/0 Str.
GP6429
2/0 Sol. - 250
GP144C
8 Sol. - 4 Str.
GP1426
1/2 - 3/4
7/8 - 1
4 Sol. - 2/0 Str.
GP1429 GP164C GP1629 GP1726 GP184C GP1826
A/C SERVICE ENTRANCE
UNINTERRUPTIBLE POWER SUPPLY
3/0 Sol. - 250 1-1/4
1-3/8 - 1-1/2
1-1/2
1-5/8 - 1-7/8
2
2 - 2-3/8
8 Sol. - 4 Str. 2/0 Sol. - 250 4 Sol. - 2/0 Str. 8 Sol. - 4 Str. 4 Sol. - 2/0 Str.
TYPE GRF UNIGROUND™ RAISED FLOOR GROUNDING CONNECTOR
TYPE GP
The BURNDY® UNIGROUND™ is a universal grounding clamp, specifically designed for all raised flooring systems. It can be installed on round or square pedestals and can accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. Number of Conductors
Conductor Size sol. & str.
Round
Square
GRF4C-3
1 or 2
#8 - #2
Up to 1”
Up to 1”
Features and Benefits n One connector fits all applications.
• Ease of specification and installation.
n Single bolt design.
• Ease of installation. • No need to disassemble. • Single wrench installation. n Accepts 1 or 2 ground conductors. • Requires less connectors to install signal reference grid. n Tin plated cast bronze construction.
• Resists corrosion and provides extended life ground connection. n Grounds all pedestals (round or square). Will handle up to 1” square and 1” round. • Ease of installation. One connector does it all. n FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
TYPE GP-G1
TYPE GRF
Applicable products for above applications.
FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground Solves all possible application problems found in today’s projects.
Pedestal Type
Catalog Number
AUTOMATIC TRANSFER SWITCH
TYPES GP-G1, GP-RT RAISED FLOOR GROUNDING CLAMPS High copper alloy ground connector for raised floor computer grounding applications. These connectors can be installed on round or square pedestal applications and will accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. In addition we offer the GP1726RT, which is especially designed for penetrating epoxy paint on pedestals. This connector offers a low impedance, time saving connection between conductors and the pedestal.
Features and Benefits
Pedestal Type
Catalog Number
Number of Conductors
Conductor Size sol. & str.
Round or Square
• Requires less connectors to install signal reference grid.
GP654CG1
1 or 2
#8 sol. - 4 str.
3/4” - 1” Round
n Made of copper alloy. n DURIUM™ U-Bolts, nuts and lockwashers.
GP64526G1
1 or 2
#4 sol. - 2/0 str.
3/4” - 1” Square
GP1526G1
1 or 2
#4 sol. - 2/0 str.
1-1/4” Round
GP1726RT
1 or 2
#6 sol. - 2/0 str.
2” Round
n Accepts 1 or 2 ground conductors
• Provides a low impedance ground path for maximum performance. n Grounds all pedestals (round or square). n Will handle from 3⁄4” to 1” round or square. • Ease of installation. n FCI-BURNDY® Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
TYPE GP GROUND CONNECTOR For Two Copper Cables to Rod or Pipe
BATTERY BACKUP
High copper alloy ground connector for joining a range of parallel cables perpendicular to rod, pipe or column. Also used with one groove for run, the other for tap to equipment. High copper alloy cast body and DURIUM™ U-bolts, nuts, and lockwashers make the GP suitable for direct burial in the ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Number
Conductor Tube I.P.S.
Rod Size or O.D. Range
GP644C GP6426
Cable 8 Sol. - 4 Str.
3/8
5/8 - 3/4
4 Sol. - 2/0 Str.
GP6429
2/0 Sol. - 250
GP144C
8 Sol. - 4 Str.
GP1426
1/2 - 3/4
7/8 - 1
4 Sol. - 2/0 Str.
GP1429 GP164C GP1629 GP1726 GP184C GP1826
A/C SERVICE ENTRANCE
UNINTERRUPTIBLE POWER SUPPLY
3/0 Sol. - 250 1-1/4
1-3/8 - 1-1/2
1-1/2
1-5/8 - 1-7/8
2
2 - 2-3/8
8 Sol. - 4 Str. 2/0 Sol. - 250 4 Sol. - 2/0 Str. 8 Sol. - 4 Str. 4 Sol. - 2/0 Str.
TYPE GRF UNIGROUND™ RAISED FLOOR GROUNDING CONNECTOR
TYPE GP
The BURNDY® UNIGROUND™ is a universal grounding clamp, specifically designed for all raised flooring systems. It can be installed on round or square pedestals and can accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. Number of Conductors
Conductor Size sol. & str.
Round
Square
GRF4C-3
1 or 2
#8 - #2
Up to 1”
Up to 1”
Features and Benefits n One connector fits all applications.
• Ease of specification and installation.
n Single bolt design.
• Ease of installation. • No need to disassemble. • Single wrench installation. n Accepts 1 or 2 ground conductors. • Requires less connectors to install signal reference grid. n Tin plated cast bronze construction.
• Resists corrosion and provides extended life ground connection. n Grounds all pedestals (round or square). Will handle up to 1” square and 1” round. • Ease of installation. One connector does it all. n FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
TYPE GP-G1
TYPE GRF
Applicable products for above applications.
FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground Solves all possible application problems found in today’s projects.
Pedestal Type
Catalog Number
AUTOMATIC TRANSFER SWITCH
TYPES GP-G1, GP-RT RAISED FLOOR GROUNDING CLAMPS High copper alloy ground connector for raised floor computer grounding applications. These connectors can be installed on round or square pedestal applications and will accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. In addition we offer the GP1726RT, which is especially designed for penetrating epoxy paint on pedestals. This connector offers a low impedance, time saving connection between conductors and the pedestal.
Features and Benefits
Pedestal Type
Catalog Number
Number of Conductors
Conductor Size sol. & str.
Round or Square
• Requires less connectors to install signal reference grid.
GP654CG1
1 or 2
#8 sol. - 4 str.
3/4” - 1” Round
n Made of copper alloy. n DURIUM™ U-Bolts, nuts and lockwashers.
GP64526G1
1 or 2
#4 sol. - 2/0 str.
3/4” - 1” Square
GP1526G1
1 or 2
#4 sol. - 2/0 str.
1-1/4” Round
GP1726RT
1 or 2
#6 sol. - 2/0 str.
2” Round
n Accepts 1 or 2 ground conductors
• Provides a low impedance ground path for maximum performance. n Grounds all pedestals (round or square). n Will handle from 3⁄4” to 1” round or square. • Ease of installation. n FCI-BURNDY® Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
TYPE GP GROUND CONNECTOR For Two Copper Cables to Rod or Pipe
BATTERY BACKUP
High copper alloy ground connector for joining a range of parallel cables perpendicular to rod, pipe or column. Also used with one groove for run, the other for tap to equipment. High copper alloy cast body and DURIUM™ U-bolts, nuts, and lockwashers make the GP suitable for direct burial in the ground or concrete. One-wrench installation. UL467 Listed. Acceptable for direct burial in earth or concrete. Catalog Number
Conductor Tube I.P.S.
Rod Size or O.D. Range
GP644C GP6426
Cable 8 Sol. - 4 Str.
3/8
5/8 - 3/4
4 Sol. - 2/0 Str.
GP6429
2/0 Sol. - 250
GP144C
8 Sol. - 4 Str.
GP1426
1/2 - 3/4
7/8 - 1
4 Sol. - 2/0 Str.
GP1429 GP164C GP1629 GP1726 GP184C GP1826
A/C SERVICE ENTRANCE
UNINTERRUPTIBLE POWER SUPPLY
3/0 Sol. - 250 1-1/4
1-3/8 - 1-1/2
1-1/2
1-5/8 - 1-7/8
2
2 - 2-3/8
8 Sol. - 4 Str. 2/0 Sol. - 250 4 Sol. - 2/0 Str. 8 Sol. - 4 Str. 4 Sol. - 2/0 Str.
TYPE GRF UNIGROUND™ RAISED FLOOR GROUNDING CONNECTOR
TYPE GP
The BURNDY® UNIGROUND™ is a universal grounding clamp, specifically designed for all raised flooring systems. It can be installed on round or square pedestals and can accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. Number of Conductors
Conductor Size sol. & str.
Round
Square
GRF4C-3
1 or 2
#8 - #2
Up to 1”
Up to 1”
Features and Benefits n One connector fits all applications.
• Ease of specification and installation.
n Single bolt design.
• Ease of installation. • No need to disassemble. • Single wrench installation. n Accepts 1 or 2 ground conductors. • Requires less connectors to install signal reference grid. n Tin plated cast bronze construction.
• Resists corrosion and provides extended life ground connection. n Grounds all pedestals (round or square). Will handle up to 1” square and 1” round. • Ease of installation. One connector does it all. n FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
TYPE GP-G1
TYPE GRF
Applicable products for above applications.
FCI-BURNDY® Raised Floor Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground Solves all possible application problems found in today’s projects.
Pedestal Type
Catalog Number
AUTOMATIC TRANSFER SWITCH
TYPES GP-G1, GP-RT RAISED FLOOR GROUNDING CLAMPS High copper alloy ground connector for raised floor computer grounding applications. These connectors can be installed on round or square pedestal applications and will accommodate one or two grounding wires to make an efficient grid. The underfloor signal reference grid provides the low impedance ground path that attenuates high frequency static and 60 Hz transient noise for cleaner data output. UL467 Listed. In addition we offer the GP1726RT, which is especially designed for penetrating epoxy paint on pedestals. This connector offers a low impedance, time saving connection between conductors and the pedestal.
Features and Benefits
Pedestal Type
Catalog Number
Number of Conductors
Conductor Size sol. & str.
Round or Square
• Requires less connectors to install signal reference grid.
GP654CG1
1 or 2
#8 sol. - 4 str.
3/4” - 1” Round
n Made of copper alloy. n DURIUM™ U-Bolts, nuts and lockwashers.
GP64526G1
1 or 2
#4 sol. - 2/0 str.
3/4” - 1” Square
GP1526G1
1 or 2
#4 sol. - 2/0 str.
1-1/4” Round
GP1726RT
1 or 2
#6 sol. - 2/0 str.
2” Round
n Accepts 1 or 2 ground conductors
• Provides a low impedance ground path for maximum performance. n Grounds all pedestals (round or square). n Will handle from 3⁄4” to 1” round or square. • Ease of installation. n FCI-BURNDY® Grounding Products serve 3 needs: 1. Signal Reference Grid 2. Static Ground 3. Fault Current Ground
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
POWER DISTRIBUTION PANEL
BACKUP GENERATOR
www.burndy.com FCI-BURNDY® PRODUCTS
UTILITY TRANSFORMER
CALL 1-800-346-4175 FOR YOUR LOCAL SALES REPRESENTATIVE
Customer Service Dept. 7 Aviation Park Drive Londonderry, NH 03053 1-800-346-4175 Canada 1-800-361-6975 (Quebec) 1-800-387-6487 (All Other Provinces)
Applicable products for above applications.
Mexico 011-52-722-265-4400 Brazil 011-55-11-5515-7200 Tool Repair Center Littleton Industrial Park Littleton, NH 03561 1-800-426-8720
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
Experience. Technology. Answers.
Data Center Products Raised Floor Grounding
Experience. Technology. Answers.
POWER DISTRIBUTION PANEL
BACKUP GENERATOR
www.burndy.com FCI-BURNDY® PRODUCTS
UTILITY TRANSFORMER
CALL 1-800-346-4175 FOR YOUR LOCAL SALES REPRESENTATIVE
Customer Service Dept. 7 Aviation Park Drive Londonderry, NH 03053 1-800-346-4175 Canada 1-800-361-6975 (Quebec) 1-800-387-6487 (All Other Provinces)
Applicable products for above applications.
Mexico 011-52-722-265-4400 Brazil 011-55-11-5515-7200 Tool Repair Center Littleton Industrial Park Littleton, NH 03561 1-800-426-8720
Compression Products for Code, Flex and Aluminum conductors
HYGROUND® Compression Grounding System
Heat Shrink Products
Installation Tooling Products (PAT750XT-18V)
Braid Products
Mechanical Grounding Products
UNITAP™ and Mechanical Connector Products
UNIRAP™ and Small HYDENT™ Products
Experience. Technology. Answers.
Data Center Products Raised Floor Grounding
Experience. Technology. Answers.
