Dell Inspiron 13-7352 Cooling Fan Replacement
Dell Inspiron 13-7352 Cooling Fan Replacement
Dell Inspiron 13-7352 Cooling Fan Replacement This guide will explain how to change the cooling fan.
Written By: Chris Monte
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
INTRODUCTION The cooling fan keeps the devices internal components from overheating during operation. It is located in the rear center of the base next to the exhaust vent.
TOOLS:
PARTS:
iFixit Opening Tools (1)
Dell Inspiron 13-7352 Laptop Fan (1)
Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
Step 1 — Battery
Before disassembling your laptop, be sure it is powered off.
Remove the ten 7.5mm screws that secure the back panel with the Phillips #0 head
Use the plastic opening tool to remove the back panel.
Step 2
Remove the two 3mm screws with the Phillips #0 head that hold down the battery.
Remove the Hard Drive wire from the battery clip by detaching the wire
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
Step 3
Gently remove the battery from the rest of the device.
Step 4 — Cooling Fan
Remove the cord that runs from system board to the I/O board.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
Step 5
Remove the 3mm and 4mm screws holding down fan with the Phillips #0 head.
Disconnect the fan wire from the system board.
Step 6
Lift the fan from the rest of the device by picking up a single side and separating it from device.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement This document was last generated on 2017-07-07 08:58:36 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement This guide will explain how to change the cooling fan.
Written By: Chris Monte
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
INTRODUCTION The cooling fan keeps the devices internal components from overheating during operation. It is located in the rear center of the base next to the exhaust vent.
TOOLS:
PARTS:
iFixit Opening Tools (1)
Dell Inspiron 13-7352 Laptop Fan (1)
Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
Step 1 — Battery
Before disassembling your laptop, be sure it is powered off.
Remove the ten 7.5mm screws that secure the back panel with the Phillips #0 head
Use the plastic opening tool to remove the back panel.
Step 2
Remove the two 3mm screws with the Phillips #0 head that hold down the battery.
Remove the Hard Drive wire from the battery clip by detaching the wire
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
Step 3
Gently remove the battery from the rest of the device.
Step 4 — Cooling Fan
Remove the cord that runs from system board to the I/O board.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement
Step 5
Remove the 3mm and 4mm screws holding down fan with the Phillips #0 head.
Disconnect the fan wire from the system board.
Step 6
Lift the fan from the rest of the device by picking up a single side and separating it from device.
To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Dell Inspiron 13-7352 Cooling Fan Replacement This document was last generated on 2017-07-07 08:58:36 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
