De'Longhi EC155 Water Reservoir O-ring Replacement

De'Longhi EC155 Water Reservoir O-ring Replacement

De'Longhi EC155 Water Reservoir O-ring Replacement Replace the water tank o-ring to stop leaks.

Written By: David Griffith

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

De'Longhi EC155 Water Reservoir O-ring Replacement

INTRODUCTION Replacing the o-ring is simple. This would be done to replace a damaged or dried o-ring.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

De'Longhi EC155 Water Reservoir O-ring Replacement

Step 1 — Water Reservoir



Flip open the top panel to reveal water reservoir.



Grab the water reservoir by the handle and lift out.

Step 2 — Water Reservoir O-ring 

Reach into the reservoir while holding it from the bottom.



Push up the piston.



While pushing the piston up, pull the O-ring out.

To reassemble your device, follow these instructions in reverse order. © iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

De'Longhi EC155 Water Reservoir O-ring Replacement This document was last generated on 2017-06-24 10:55:55 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4