DINO TABLES
ASSEMBLY INSTRUCTIONS
DINO TABLES 1343 1344 1347
BDIUSA.COM
[email protected]
Placement and Maintenance
DINO TABLES are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth.
DINO 1343 COFFEE TABLE
DINO 1344 SMALL COFFEE TABLE
DINO 1347 END TABLE
Component List
DINO TABLES are engineered for easy assembly. Carefully follow this procedure to prevent any damage. Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer.
A - Hex Wrench 4mm x1 F
B - 1/4-20 x 3/4 Flat Head Screws 4mm Socket Drive x6 C - 1/4-20 x 1/2 Flat Head Screws 4mm Socket Drive x3
E
H
D - Legs x 3 E - Shelf x 1 C
F - Glass x 1
D
G - Felt Pads x 3 H - Felt O-Rings x 3
B G
Designed by Louis A. Lara These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. BDI are trademarks of Becker Designed, Inc. All Rights reserved. © 2011 BDI 1343 1344 1347 Revision: 02-23-11
1
Step 1 - Attach Legs to Shelf Place long edge of Shelf (E) on soft surface in order to prevent damage. Attach Legs (D) to Shelf (E) using Screws (B) and tighten using Hex Drive Wrench (A). Attach first Leg (D) to middle point of Shelf (E). Optional: If placed on hard floor, attach Felt Pads (G) to bottom of Legs (D).
D Attach 1st
G D
G A
B B
D
D
G E Shelf Place long edge on soft surface in order to prevent damage.
G
Step 2 - Attach Glass to Legs Attach Felt O-Rings (H) to Glass Pucks. Turn table up onto Legs (D). Place Glass (F) onto Legs (D). Loosely start all Screws (C) into Glass Fittings. After all Screws (C) are started, then tighten Screws (C) using Hex Drive Wrench (A).
F
D
F
Glass Puck
H D C
A
DINO TABLES 1343 1344 1347
2
ASSEMBLY INSTRUCTIONS BDIUSA.COM
[email protected]
DINO TABLES 1343 1344 1347
BDIUSA.COM
[email protected]
Placement and Maintenance
DINO TABLES are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth.
DINO 1343 COFFEE TABLE
DINO 1344 SMALL COFFEE TABLE
DINO 1347 END TABLE
Component List
DINO TABLES are engineered for easy assembly. Carefully follow this procedure to prevent any damage. Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet. For missing hardware pieces, please contact BDI Customer Service at [email protected]. For all other concerns, please contact your BDI Retailer.
A - Hex Wrench 4mm x1 F
B - 1/4-20 x 3/4 Flat Head Screws 4mm Socket Drive x6 C - 1/4-20 x 1/2 Flat Head Screws 4mm Socket Drive x3
E
H
D - Legs x 3 E - Shelf x 1 C
F - Glass x 1
D
G - Felt Pads x 3 H - Felt O-Rings x 3
B G
Designed by Louis A. Lara These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. BDI are trademarks of Becker Designed, Inc. All Rights reserved. © 2011 BDI 1343 1344 1347 Revision: 02-23-11
1
Step 1 - Attach Legs to Shelf Place long edge of Shelf (E) on soft surface in order to prevent damage. Attach Legs (D) to Shelf (E) using Screws (B) and tighten using Hex Drive Wrench (A). Attach first Leg (D) to middle point of Shelf (E). Optional: If placed on hard floor, attach Felt Pads (G) to bottom of Legs (D).
D Attach 1st
G D
G A
B B
D
D
G E Shelf Place long edge on soft surface in order to prevent damage.
G
Step 2 - Attach Glass to Legs Attach Felt O-Rings (H) to Glass Pucks. Turn table up onto Legs (D). Place Glass (F) onto Legs (D). Loosely start all Screws (C) into Glass Fittings. After all Screws (C) are started, then tighten Screws (C) using Hex Drive Wrench (A).
F
D
F
Glass Puck
H D C
A
DINO TABLES 1343 1344 1347
2
ASSEMBLY INSTRUCTIONS BDIUSA.COM
[email protected]
