Disassembling HP Envy 17-3070NR Motherboard ... AWS

Disassembling HP Envy 17-3070NR Motherboard Assembly

Disassembling HP Envy 17-3070NR Motherboard Assembly Prerequisite Only guide for accessing motherboard.

Written By: Jasper Lewin

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Disassembling HP Envy 17-3070NR Motherboard Assembly

Step 1 — Motherboard Assembly 

Remove the two 4.5mm Phillips screws from the system board

Step 2



Disconnect three cables by lifting a white clamp with a Flathead screwdriver and pulling on the blue tab.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Disassembling HP Envy 17-3070NR Motherboard Assembly

Step 3



Disconnect three cables by pulling upward on black or blue tabs connected to them.

Step 4



Disconnect cable by using a Flathead screwdriver to gently pry it off the black connector towards you.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Disassembling HP Envy 17-3070NR Motherboard Assembly

Step 5



Lift up the power connector from the clip.

Step 6



Carefully lift up motherboard from the main assembly.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-31 07:26:06 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4