Disassembling Minolta Maxxum STsi Bottom Panel

Disassembling Minolta Maxxum STsi Bottom Panel

Disassembling Minolta Maxxum STsi Bottom Panel Prerequisite Only

Written By: Jacobe Labog

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Disassembling Minolta Maxxum STsi Bottom Panel

INTRODUCTION The bottom panel is easy to remove requiring only a Philips screwdriver with a #00 head.

TOOLS: Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Disassembling Minolta Maxxum STsi Bottom Panel

Step 1 — Bottom Panel 

Remove the seven black Phillips #00 5.0 mm screws.



Gently remove the bottom panel using your fingers.

Step 2

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 07:09:17 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3