Disassembling Samsung Galaxy Ace Logic Board
Disassembling Samsung Galaxy Ace Logic Board
Disassembling Samsung Galaxy Ace Logic Board How to dissamble the phone for logic board reworking
Written By: finster
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 8
Disassembling Samsung Galaxy Ace Logic Board
TOOLS: Spudger (1) Phillips #00 Screwdriver (1) Tweezers (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 1 — Logic Board
Remove the battery cover and the battery
Step 2
Remove the 7 silver screws with a Phillips #000 screw driver.
Sometimes the green one could be a little difficult. Use a tweezer for get it out.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 3
Lift gently the back cover from the screen assembly from the bottom.
Step 4
Use a flat tweezer for take off the flexible on/off button from the frame.
Be careful, the flexible is very delicate; it could be cut if you go too fast.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 5
Use a flat tweezer and take off gently Flexible volume button from the left side.
Do the same for the right side.
Then lift the flex slowly, if you go fast you may cut the cable. Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Lift the microphone from the logic board.
Page 5 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 7
Lift the sensor/earpiece cable with the opening tool.
Don't force, you may damage the soldering.
Step 8
Lift the logic board from the right side.
Use the removal tool to unplug the display cable from the logic board.
You can now separate the Logic board from the display assembly.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 9
Use the removal tool to unclip the camera module from the Logic board.
Step 10
Use the removal tool or a spudger to unplug speaker module cable
And separate the speaker module from Logic board.
Be caution, the module is fixed by plastic teeth to the Logic board. Don't force, just make little wave-movements and the speaker comes on his own.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 11
Now you can work with the Logic board.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-28 11:58:58 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 8
Disassembling Samsung Galaxy Ace Logic Board How to dissamble the phone for logic board reworking
Written By: finster
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 8
Disassembling Samsung Galaxy Ace Logic Board
TOOLS: Spudger (1) Phillips #00 Screwdriver (1) Tweezers (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 1 — Logic Board
Remove the battery cover and the battery
Step 2
Remove the 7 silver screws with a Phillips #000 screw driver.
Sometimes the green one could be a little difficult. Use a tweezer for get it out.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 3
Lift gently the back cover from the screen assembly from the bottom.
Step 4
Use a flat tweezer for take off the flexible on/off button from the frame.
Be careful, the flexible is very delicate; it could be cut if you go too fast.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 5
Use a flat tweezer and take off gently Flexible volume button from the left side.
Do the same for the right side.
Then lift the flex slowly, if you go fast you may cut the cable. Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Lift the microphone from the logic board.
Page 5 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 7
Lift the sensor/earpiece cable with the opening tool.
Don't force, you may damage the soldering.
Step 8
Lift the logic board from the right side.
Use the removal tool to unplug the display cable from the logic board.
You can now separate the Logic board from the display assembly.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 9
Use the removal tool to unclip the camera module from the Logic board.
Step 10
Use the removal tool or a spudger to unplug speaker module cable
And separate the speaker module from Logic board.
Be caution, the module is fixed by plastic teeth to the Logic board. Don't force, just make little wave-movements and the speaker comes on his own.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 8
Disassembling Samsung Galaxy Ace Logic Board
Step 11
Now you can work with the Logic board.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-28 11:58:58 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 8
