Disassembling TI-36X Pro Back Cover

Disassembling TI-36X Pro Back Cover

Disassembling TI-36X Pro Back Cover This guide gives detailed instructions for removing the back cover to a TI-36X Pro.

Written By: Robert Sekerak

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Disassembling TI-36X Pro Back Cover

INTRODUCTION For this guide you will remove six screws in order to remove the back cover.

TOOLS: Phillips #1 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Disassembling TI-36X Pro Back Cover

Step 1 — Back Cover



Remove the calculator's protective cover.



Place the calculator face down.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Disassembling TI-36X Pro Back Cover

Step 2



Using a Phillips #1 screwdriver, remove the six 6mm screws from the back of the case and place them to the side.



Start from the notches on the top edge and use your fingers or a prying tool to carefully pry the back cover from the calculator.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-24 10:55:08 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4