discontinued - Toto USA
TEL3GGW10 & TEL5GGW10 Series Gooseneck Wall-Mount EcoPower® Faucet FEATURES
ED
• Hydropower self-generating system • Sensor faucet with aerated flow • Self adjusting faucet with control box and mounting hardware, less supply lines • Wall mount
O N
T
• TEL5GGW10 - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. • TEL210GRV100 - Gooseneck Wall-Mount Spout 1.0 gpm • TN78-10V510 - Thermal Mixing Controller, 10 sec/1.0 gpm
IN
• TEL3GGW10 - Single Supply Discharge: On-demand; Up to 10 seconds while activated. • TEL210GRV100 - Gooseneck Wall-Mount Spout 1.0 gpm • TN78-9V510 - Single Supply Controller, 10 sec/1.0 gpm
U
MODELS
C
Optional Accessories: • 1.0 gpm Laminar Flow Nozzle: TH559EDV432
IS
COLORS/FINISHES
D
• #CP Polished Chrome
PRODUCT SPECIFICATION TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallon per 10 second cycle. Single hole faucet with optional 4" and 8" cover plates. Faucet uses 0.17 gallon/cycle which is 32% below CALGreen’s baseline.
CODES/STANDARDS • • • • • •
Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen Meets or exceeds ASME A112.18.1M/CSA B125.1, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others California Green Code and City of Los Angeles Water Efficiency Ordinance ADA compliant Complies with federal and state statutes as lead-free
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
TEL3GGW10 & TEL5GGW10 Series Gooseneck Wall-Mount EcoPower® Faucet NOTE
• Warranty Three year warranty • Material Brass • Power Supply Hydropower self-generating system • Hot/Cold-Water Supply Minimum Pressure (dynamic): 20PSI (0.07MPa) Maximum Pressure (static): 80PSI (0.55MPa) • Flow Rate 0.17 gallons per cycle (1.0 gallons per minute/max. 10 seconds discharge) • Water Supply Connect 1/2" NPSM Male • Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 seconds • Detection Time ON feature: Immediate OFF feature: 1 second delay Factory set at 2-1/4" • Detection Range Faucet automatically sets the detection range according to the size of the basin • Discharge Water Thermal Mixing Faucet: Temperature Control Cold water - 104°F (Max) Range (When used under standard conditions) Provides the user protection • Anti-scald Safety Feature against exposure to excessive water temperature (Thermal mixing faucet, only)
Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the “Water Consumption” standard, a faucet must not use more than 0.25 gallon of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallon of water, or 0.5 gallon per minute. This is a 32% below the base line of 0.25 gallon per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult www.totousa.com
IN
U
ED
SPECIFICATIONS
C
O N
T
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Dimensions: Inch (mm)
IS
- Not recommended for 2 x 4 wall installation. - Access to back side of mounting surface is required for installation of spout mounting bracket. - Drilling is required for anti-rotation screw installation. - Plywood reinforcement is recommended for Drywall installation. 2" (50mm) 1-3/8" (36mm)
8-9/16" (218mm)
7-1/2" (190mm)
D from Spout Hole
1-5/16" (33mm)
Water supply
5-9/16" (142mm)
**Spout Hole Diameter 1-1/8" (28mm)
1-3/8" (35mm)
31" (787mm)
20-3/4" (527mm) 10-1/4" (260mm)
1-3/16" (30mm) 5-1/2" (140mm)
Single Supply
HOT COLD 8"(203 mm)
Distance from Spout Mounting Hole to M5 Anti-Rotation* screw: 15/16" (24mm)
10˚
(251mm)
7" (177mm)
10-1/4" (260mm)
6" (152mm) F.L.
Lavatory or finished wall MAX. Wall Thickness* (Mounting Surface) 2” (50mm) MIN. space req’mt in WALL from finished wall 9-15/16" 4” (100mm)
1-1/2" (38 mm) 6" (152mm) 1" (25mm)
3-3/4" (95 mm) 1" (25 mm)
16-7/8" (428mm)
34" (864mm) 17-1/8" (436mm)
1-5/8" (42 mm) 6-1/2" (165mm)
F.L.
Thermal Mixing
*Spout has the anti-rotation feature with M5 set screw on Mounting Bracket and is good for Stainless Steel sinks installation.
**Spout Hole Diameter MAX. 1-1/2” (38mm) for Stainless Steel Sinks
These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
#SS-00616, v.02
ED
• Hydropower self-generating system • Sensor faucet with aerated flow • Self adjusting faucet with control box and mounting hardware, less supply lines • Wall mount
O N
T
• TEL5GGW10 - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. • TEL210GRV100 - Gooseneck Wall-Mount Spout 1.0 gpm • TN78-10V510 - Thermal Mixing Controller, 10 sec/1.0 gpm
IN
• TEL3GGW10 - Single Supply Discharge: On-demand; Up to 10 seconds while activated. • TEL210GRV100 - Gooseneck Wall-Mount Spout 1.0 gpm • TN78-9V510 - Single Supply Controller, 10 sec/1.0 gpm
U
MODELS
C
Optional Accessories: • 1.0 gpm Laminar Flow Nozzle: TH559EDV432
IS
COLORS/FINISHES
D
• #CP Polished Chrome
PRODUCT SPECIFICATION TOTO Model #______________ Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallon per 10 second cycle. Single hole faucet with optional 4" and 8" cover plates. Faucet uses 0.17 gallon/cycle which is 32% below CALGreen’s baseline.
CODES/STANDARDS • • • • • •
Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen Meets or exceeds ASME A112.18.1M/CSA B125.1, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others California Green Code and City of Los Angeles Water Efficiency Ordinance ADA compliant Complies with federal and state statutes as lead-free
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.
TEL3GGW10 & TEL5GGW10 Series Gooseneck Wall-Mount EcoPower® Faucet NOTE
• Warranty Three year warranty • Material Brass • Power Supply Hydropower self-generating system • Hot/Cold-Water Supply Minimum Pressure (dynamic): 20PSI (0.07MPa) Maximum Pressure (static): 80PSI (0.55MPa) • Flow Rate 0.17 gallons per cycle (1.0 gallons per minute/max. 10 seconds discharge) • Water Supply Connect 1/2" NPSM Male • Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 seconds • Detection Time ON feature: Immediate OFF feature: 1 second delay Factory set at 2-1/4" • Detection Range Faucet automatically sets the detection range according to the size of the basin • Discharge Water Thermal Mixing Faucet: Temperature Control Cold water - 104°F (Max) Range (When used under standard conditions) Provides the user protection • Anti-scald Safety Feature against exposure to excessive water temperature (Thermal mixing faucet, only)
Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the “Water Consumption” standard, a faucet must not use more than 0.25 gallon of water per cycle. The TOTO® faucet with a 10 second cycle uses 0.17 gallon of water, or 0.5 gallon per minute. This is a 32% below the base line of 0.25 gallon per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult www.totousa.com
IN
U
ED
SPECIFICATIONS
C
O N
T
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Dimensions: Inch (mm)
IS
- Not recommended for 2 x 4 wall installation. - Access to back side of mounting surface is required for installation of spout mounting bracket. - Drilling is required for anti-rotation screw installation. - Plywood reinforcement is recommended for Drywall installation. 2" (50mm) 1-3/8" (36mm)
8-9/16" (218mm)
7-1/2" (190mm)
D from Spout Hole
1-5/16" (33mm)
Water supply
5-9/16" (142mm)
**Spout Hole Diameter 1-1/8" (28mm)
1-3/8" (35mm)
31" (787mm)
20-3/4" (527mm) 10-1/4" (260mm)
1-3/16" (30mm) 5-1/2" (140mm)
Single Supply
HOT COLD 8"(203 mm)
Distance from Spout Mounting Hole to M5 Anti-Rotation* screw: 15/16" (24mm)
10˚
(251mm)
7" (177mm)
10-1/4" (260mm)
6" (152mm) F.L.
Lavatory or finished wall MAX. Wall Thickness* (Mounting Surface) 2” (50mm) MIN. space req’mt in WALL from finished wall 9-15/16" 4” (100mm)
1-1/2" (38 mm) 6" (152mm) 1" (25mm)
3-3/4" (95 mm) 1" (25 mm)
16-7/8" (428mm)
34" (864mm) 17-1/8" (436mm)
1-5/8" (42 mm) 6-1/2" (165mm)
F.L.
Thermal Mixing
*Spout has the anti-rotation feature with M5 set screw on Mounting Bracket and is good for Stainless Steel sinks installation.
**Spout Hole Diameter MAX. 1-1/2” (38mm) for Stainless Steel Sinks
These dimensions and specifications are subject to change without notice Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
#SS-00616, v.02
