Display Board 1 Instructions
The Finial Company Wood & Resin Display Board 1 Assembly Instructions
A. Finial Pole
F300-‐3 3TR
Finish 790 Finish 790
B. Finial Pole
F214-‐14 225WG
H. Finial Pole
F300-‐1 3GR
Finish 630 Finish 630
A.
H.
Finish 680 Finish 680
B.
I.
I. Finial Pole
F214-‐10 225WR
Finish 660 Finish 660
C. Finial Pole
F214-‐Clear Finish 670 225FL Finish 670
C.
J.
J. Finial Pole
F214-‐7 225FL
Finish 640 Finish 640
D. Finial Pole
F214-‐1 225WR
Finish 770 Finish 770
D.
K.
K. Finial Pole
F214-‐4 WWR
Finish 710 Finish 710
E. Finial Pole
F138-‐2 138TW
Finish 730 Finish 730
E.
L.
F.
L. Finial Pole
F138-‐6 WS38
Finish 620 Finish 620
M.
M. Finial Pole
F138-‐1 WR38
Finish 600 Finish 600
N. Finial F138-‐8 Pole WNF38
Finish 760 Finish 760
F. Finial Pole
F138-‐7 WG38
Finish 610 Finish 610
G. Finial F138-‐3 Pole WS38
Finish 650 Finish 650
O. Rosette
Finish 750
ROS6C
Enclosed: (2) 24" X 32" product spines (1) 24" X 42" display board (1) Packet of installation hardware (1) Packet of display product labels
G.
O.O.
N.
P.P.
Q.
P. Rosette wood ROS5and resin Finish 690 Q. Rosette display ROS3 boardFinish 740 2 42"H x 24"W x 7"Deep wall mount
wood and resin display board 1 42"H x 24"W x 7"Deep wall mount
4
Needed equipment for assembly: Enclosed installation hardware and drill with Phillips head drill bit or Phillips screwdriver
1. Attach spines to display board with the large screws marked SPINE SCREWS. Make sure that the spine drill holes (for finial on pole) are facing inward and NOT to the outside of the board. 2. Holdback installation: Holdback O. Attach holdback installation plate (use the #8 holdback screws) to board. Place holdback base plate, screw on holdback stem and screw on rosette medallion.
For holdbacks P. and Q. attach holdback installtion plate, screw on holdback stem and screw on rosette medallion to complete installation. 3. Finial Display product: Finial display products are labeled by location the and modern product collection item numberin that the above plan-‐o-‐gram. Attach the "finials on pole pieces" to the designated location on the spine. display unit 1 3"Hpxroduct. 24"W x 4"Deep 4. Attach enclosed display product labels to dipslay board location of each wall mount 5. Display board hangers have been included to hang the assembled display board. Please install in the upper left hand and right hand corner on the back side of the board 3/4" from the outer edge of the board and 1 1/2" from the top of the board. Display should be installed securely into wall studs.
86
www.thefinialcompany.com
Customer Service: Email: [email protected] Phone: 800.763.1348 Fax: 800.888.7171
the modern c display u 3"H x 24"W wall mo
A. Finial Pole
F300-‐3 3TR
Finish 790 Finish 790
B. Finial Pole
F214-‐14 225WG
H. Finial Pole
F300-‐1 3GR
Finish 630 Finish 630
A.
H.
Finish 680 Finish 680
B.
I.
I. Finial Pole
F214-‐10 225WR
Finish 660 Finish 660
C. Finial Pole
F214-‐Clear Finish 670 225FL Finish 670
C.
J.
J. Finial Pole
F214-‐7 225FL
Finish 640 Finish 640
D. Finial Pole
F214-‐1 225WR
Finish 770 Finish 770
D.
K.
K. Finial Pole
F214-‐4 WWR
Finish 710 Finish 710
E. Finial Pole
F138-‐2 138TW
Finish 730 Finish 730
E.
L.
F.
L. Finial Pole
F138-‐6 WS38
Finish 620 Finish 620
M.
M. Finial Pole
F138-‐1 WR38
Finish 600 Finish 600
N. Finial F138-‐8 Pole WNF38
Finish 760 Finish 760
F. Finial Pole
F138-‐7 WG38
Finish 610 Finish 610
G. Finial F138-‐3 Pole WS38
Finish 650 Finish 650
O. Rosette
Finish 750
ROS6C
Enclosed: (2) 24" X 32" product spines (1) 24" X 42" display board (1) Packet of installation hardware (1) Packet of display product labels
G.
O.O.
N.
P.P.
Q.
P. Rosette wood ROS5and resin Finish 690 Q. Rosette display ROS3 boardFinish 740 2 42"H x 24"W x 7"Deep wall mount
wood and resin display board 1 42"H x 24"W x 7"Deep wall mount
4
Needed equipment for assembly: Enclosed installation hardware and drill with Phillips head drill bit or Phillips screwdriver
1. Attach spines to display board with the large screws marked SPINE SCREWS. Make sure that the spine drill holes (for finial on pole) are facing inward and NOT to the outside of the board. 2. Holdback installation: Holdback O. Attach holdback installation plate (use the #8 holdback screws) to board. Place holdback base plate, screw on holdback stem and screw on rosette medallion.
For holdbacks P. and Q. attach holdback installtion plate, screw on holdback stem and screw on rosette medallion to complete installation. 3. Finial Display product: Finial display products are labeled by location the and modern product collection item numberin that the above plan-‐o-‐gram. Attach the "finials on pole pieces" to the designated location on the spine. display unit 1 3"Hpxroduct. 24"W x 4"Deep 4. Attach enclosed display product labels to dipslay board location of each wall mount 5. Display board hangers have been included to hang the assembled display board. Please install in the upper left hand and right hand corner on the back side of the board 3/4" from the outer edge of the board and 1 1/2" from the top of the board. Display should be installed securely into wall studs.
86
www.thefinialcompany.com
Customer Service: Email: [email protected] Phone: 800.763.1348 Fax: 800.888.7171
the modern c display u 3"H x 24"W wall mo
