divine
SUSTAINABLE
upholstery
divine WIDTH 56" (142 cm) CONTENTS 74% polyester, 26% nylon RECYCLED CONTENT 74% post-consumer (polyester) BACKING Acrylic FINISH Nanotex® REPEAT 7.19" (18.5 cm) horizontal repeat, 7.13" (18 cm) vertical repeat ABRASION RESISTANCE ASTM D4157: 100,000 double rubs FIRE TEST
Cal TB 117-2013: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours TENSILE STRENGTH ASTM D5034: meets requirements ADDITIONAL TESTS
ASTM D3511/D3511M Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE W/S (water-based and/or solvent-based cleaners) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean with a mild solvent, an upholstery shampoo or the foam from a mild detergent. When using a solvent or dry-cleaning product, follow instructions carefully and clean only in a well-ventilated room. With either method, pretest a small area before proceeding.
Bleach cleanable ~ 25% solution of household bleach and water. Rinse with fresh water and wipe dry. CUSTOM COLORS AVAILABLE MADE IN THE USA THIS FABRIC MEETS OR EXCEEDS ACT STANDARDS
ŃßøÍ
© 2016 Wall Source LLC
upholstery
divine WIDTH 56" (142 cm) CONTENTS 74% polyester, 26% nylon RECYCLED CONTENT 74% post-consumer (polyester) BACKING Acrylic FINISH Nanotex® REPEAT 7.19" (18.5 cm) horizontal repeat, 7.13" (18 cm) vertical repeat ABRASION RESISTANCE ASTM D4157: 100,000 double rubs FIRE TEST
Cal TB 117-2013: meets requirements UFAC/NFPA 260: Class I COLORFASTNESS
AATCC-8 Colorfastness to Wet & Dry Crocking: meets requirements AATCC-16 Colorfastness to Light: meets requirements, 40 hours TENSILE STRENGTH ASTM D5034: meets requirements ADDITIONAL TESTS
ASTM D3511/D3511M Pilling: meets requirements ASTM D4034 Seam Slippage: meets requirements WARRANTY Material is warranted to be free of defects in workmanship for a period of one year. Materials comply with ACT Standards and are suitable for the intended use. CLEANING CODE W/S (water-based and/or solvent-based cleaners) ~ To prevent overall soiling, frequent vacuuming or light brushing to remove dust and grime is recommended. Spot clean with a mild solvent, an upholstery shampoo or the foam from a mild detergent. When using a solvent or dry-cleaning product, follow instructions carefully and clean only in a well-ventilated room. With either method, pretest a small area before proceeding.
Bleach cleanable ~ 25% solution of household bleach and water. Rinse with fresh water and wipe dry. CUSTOM COLORS AVAILABLE MADE IN THE USA THIS FABRIC MEETS OR EXCEEDS ACT STANDARDS
ŃßøÍ
© 2016 Wall Source LLC
