Dottie Catalog 5.qxd
B
B
Tapered with Wings PC 4370
CAT NO
UPC
121 122 123
4-6-8 8-10-12 12-14-16
Tapered with Collar PC 4370 • Tapered with Collar • Plastic • Packed in Invincibox™
20 21 22 23
UPC
Straight PC 4370
CAT NO
221 222 223
UPC
3/16" 1/4" 5/16"
3/16" 3/16" 1/4" 5/16”
• Plastic • Packed in Invincibox™
1711 1714
UPC
Triple Grip PC 4370
3/4" 7/8" 1" 1-1/2”
Red Red Red Red
SCREW SIZE DRILL SIZE LENGTH COLOR 6-8 10-12 12-14
• Nylon • Steel Pin
10070 10075
100 100 50
500 500 250
4000 3000 1500
0.11# 0.20# 0.15#
C C C
SIZE
3/16" 1/4"
STD SLEEVE MSTR WT/STD UNIT 100 100 100 50
500 500 500 250
4000 4000 3000 1500
0.08# 0.08# 0.15# 0.14#
C C C C
Plastic anchors: Straight. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
3/16" 1/4" 5/16"
Nylon Button Head with Pins PC 4370
CAT NO
White Yellow Green
STD SLEEVE MSTR WT/STD UNIT
Plastic anchors: Tapered w/Collar. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
4-6-8 6-8-10 8-10-12 12-14-16
16085 16090 16095
• Straight • Ribbed Body
1" 1-1/4" 1-1/2"
SCREW SIZE DRILL SIZE LENGTH COLOR
15080 15085 15090 15095
• Straight • Ribbed Body
Plastic anchors: Tapered with Wings. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
SCREW SIZE DRILL SIZE LENGTH COLOR
31430 31432 31434
CAT NO
• Wings Secure Anchor From Spinning
ANCHORS & KITS > ANCHORS
• Tapered with Wings • Plastic • Packed in Invincibox™
1" 1" 1-1/2"
White Green Blue
STD SLEEVE MSTR WT/STD UNIT 100 100 50
500 500 250
4000 3000 1500
0.15# 0.22# 0.23#
C C C
Nylon button head anchors with pins. Fast and easy to install. Position the fixture, drill a hole into concrete, brick or block and insert anchor through the fixture into the hole. Hammer the nail to spread and secure anchor. Used for light duty work.
LENGTH 1" 1"
COLOR White White
STD 100 100
SLEEVE 500 500
MSTR 3000 3000
WT/STD 0.55# 0.57#
UNIT C C
• Claws Grip For Strength • Wings For Strength and Vibration Resistance • Core Expands For additional Holding Power
CAT NO UPC SCREW SIZE DRILL SIZE LENGTH COLOR STD SLEEVE MSTR WT/STD UNIT
6 8 10 12
81643 81644 81645 81646
#6 #8 #10 #12
1/4" 1/4" 5/16" 3/8"
1-1/4" 1-1/4" 1-1/2" 1-1/2"
Beige 100 Gray 100 Blue 50 Green 50
See new products at lhdottie.com
500 500 250 250
4000 4000 1500 1500
0.91# 0.97# 0.60# 1.23#
C C C C
B1
Wall Driller Anchors - Boxed PC 4465
ANCHORS & KITS > ANCHORS
Wall Driller: Used only in drywall, this anchor has better pullout and shear values than plastic anchors. Installed by inserting Phillips or square drive bit into the anchor and driving it into the drywall until flush. Use the same bit to insert the proper sheet metal screw to mount the fixture. The anchor is easy to spot and will not break out the backing of the drywall. No drill bit needed.
CAT NO
UPC
WD6 WD6N WD8 WD8N
29770 29771 29776 29777
USE SCREW
ANCHOR
#6 #6 #8 #8
Zinc Nylon Zinc Nylon
DRYWALL 3/8", 3/8", 3/8", 3/8",
• Not Recommended for Ceiling Applications
• Wall Driller • Anchors Only • Boxed • Zinc or Nylon
STD
1/2" 1/2" 1/2", 5/8" 1/2", 5/8"
100 100 100 100
MSTR 1000 1000 1000 1000
Screws & Bit not provided. Use 6 x 1 SMS with WD6, Use 8 x 1-1/4 SMS with WD8, Use #2 bit for both. See Page B14 for Wall Driller Kits.
CAT NO
ANCHOR SPECIFICATIONS
SCREW
WD6N WD6 WD8N WD8
MATERIAL
#6 #6 #8 #8
3/8” DRYWALL TENSILE SHEAR
Nylon Zinc Nylon Zinc
55 55 60 60
110 110 120 120
1/2” DRYWALL TENSILE SHEAR
60 60 68 68
WT/STD UNIT 0.83# 0.23# 1.72# 0.48#
C C C C
5/8” DRYWALL TENSILE SHEAR
120 120 132 132
N/A N/A 90 90
N/A N/A 200 200
All values are ultimate loads and should be used as a guide only. Actual results may very. It is recommended to apply a minimum safety factor of 4 to 1 to these loads. #6 sheet metal screws were used in tests with #6 Wall Driller. #8 sheet metal screws were used in tests with #8 Wall Driller.
Driller Toggle - Boxed PC 4461
STRENGTH
CAT NO
YOU CAN DEPEND ON!
UPC
WDT83BX 81489 WDT363BX 81490 WDT43BX 81491
CONTENTS
• Driller Toggle • Includes Screws • Reusable
• Metal/Engineered Plastic
STD MSTR WT/STD UNIT
1/8" Driller Toggle (1/8" x 3" Truss Hd. Mach. Screws) 50 3/16" Driller Toggle (3/16" x 3" Truss Hd. Mach. Screws) 50 1/4" Driller Toggle (1/4" x 3" Truss Hd. Mach. Screws) 50
Power Bit not provided. See page B15 for Driller Toggle Kit.
500 500 200
1.55# 2.25# 3.65#
C C C
FEATURES • No Pre-Drilling • Quick & Easy • Ideal for Ceiling Applications • Combo Truss Head Screws • Versatile for 3/8", 1/2" and 5/8" Drywall! DRYWALLL THICKNESS
3/8" 1/2" 5/8"
TEST RESULTS TENSION (LBS)
87 106 160
SHEAR (LBS)
231 253 285
NOTE: The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4 or greater to determine the allowable working load.
B2
To Order: Phone (323)725-1000 / Fax (323)721-0000
Zamac Anchors - Hammer Screws PC 4495
CAT NO
ZAS75 ZAS100 ZAS125 ZAS150 ZAS200
UPC
59360 59361 59362 59363 59364
Zamac Anchors PC 4490
ANCHOR SIZE 1/4 1/4 1/4 1/4 1/4
x x x x x
3/4" 1" 1-1/4" 1-1/2" 2"
• Zamac Alloy with Carbon Steel Pin • Use for Concrete, Block, Brick, Stone • Not recommended for Ceiling Applications
CAT NO ZA78 ZA75 ZA100 ZA125 ZA150 ZA200
Drive Pins PC 4480
UPC
59350 59348 59352 59354 59356 59358
• Drive Pins • 1/4" Head • Steel
CAT NO HD220 HD230 HD240 HD255 HD260
Stud Driver PC 4482
HD
3/16 x 7/8" 1/4 x 3/4" 1/4 x 1" 1/4 x 1-1/4" 1/4 x 1-1/2" 1/4 x 2"
DRILL SIZE 1/4" 1/4" 1/4" 1/4" 1/4"
STD
MSTR
100 100 100 100 100
500 500 500 500 500
WT/STD 1.50# 1.75# 2.25# 2.50# 3.00#
UNIT C C C C C
Zamac anchors have better shear resistance than plastic pin anchors. Fast and easy to install. Position the fixture, drill a hole through the fixture or through an existing hole in fixture into concrete, brick or block and insert anchor through the fixture into the hole until flush. Hammer the nail to spread and secure anchor. Used for light duty work.
DRILL SIZE 3/16" 1/4" 1/4" 1/4" 1/4" 1/4"
STD
MSTR
100 100 100 100 100 100
500 500 500 500 500 500
WT/STD UNIT 0.75# 1.50# 1.75# 2.25# 2.50# 3.00#
C C C C C C
Drive pins are installed with a stud driver. The pin is inserted into the driver which is placed onto the item to be fastened. Using a sledge or drilling hammer, drive the pin home. Will drive through metal into concrete.
UPC
29005 29010 29015 29020 29025
• Use With 1/4" Pins • Cushioned Grip
CAT NO
ANCHOR SIZE
The Zamac Hammer Screw® is a unique, one-step drive anchor featuring a Phillips head and a screw thread. Designed to provide a removable anchor with 40% higher tension load capacities when installed in concrete.
ANCHORS & KITS > ANCHORS
• Zamac Alloy with Carbon Steel Screw Drive • Use for Concrete, Block, Brick, Stone • Not Recommended for Ceiling Applications
UPC
15755
* Hammer not included
LENGTH 3/4" 1" 1-1/4" 1-1/2" 2"
STD 100 100 100 100 100
MSTR 4000 4000 3000 3000 3000
WT/STD 0.51# 0.66# 0.77# 0.88# 0.99#
UNIT C C C C C
Drive pins are installed with a stud driver. The pin is inserted into the driver which is placed onto the item to be fastened. Using a sledge or drilling hammer, drive the pin home. Will drive through concrete.
STD 1
MSTR 6
See new products at lhdottie.com
WT/STD 0.66#
UNIT Ea
B3
Machine Screw Anchors PC 4520
ANCHORS & KITS > ANCHORS
Machine screw (lead) anchors: Performs well in a variety of concrete strengths, can be used in brick. Any head style screw can be used. The screw can be easily removed or loosened and retightened. Vibration does not affect the lead insertʼs hold on the concrete. Adapts well to hole size variations. Drill hole in concrete and drop anchor expander side down into hole. Place setting tool over anchor and hammer until set.
CAT NO MA2 MA3 MA5 MA6 MA7 MA8
UPC
29910 29915 29925 29930 29935 29940
ANCHOR SIZE
DRILL SIZE
8-32 10-24 1/4-20 5/16" 3/8" 1/2"
5/16" 3/8" 1/2" 5/8" 3/4" 7/8"
INSTALL TOOL ST2 ST3 ST5 ST6 ST7 ST8
STD
MSTR
100 100 100 50 50 50
1000 1000 600 300 300 300
WT/STD UNIT 1.00# 1.75# 4.50# 3.90# 7.00# 9.50#
ST Tool must be used for proper installation (sold separately).
C C C C C C
“ST” Tools for MA Anchors PC 4530
“ST” tool must be used for proper installation. Sold separately from MA anchors
CAT NO ST2 ST3 ST5 ST6 ST7 ST8
UPC
17600 17605 17610 17615 17620 17625
SIZE
8-32 10-24 1/4-20 5/16" 3/8" 1/2"
USE FOR
STD
MA2 MA3 MA5 MA6 MA7 MA8
1 1 1 1 1 1
CAT NO NT14L NT38L
UPC
66790 66795
SCREW/SIZE 8 x 1-1/2" 10 x 1-1/2"
MSTR 10 10 10 10 10 10
Toggle Anchors - Nylon PC 4320
Nylon Toggle Anchors: After proper size hole is drilled, fold and insert anchor into hole. In solid concrete it will act as a conventional anchor, in hollow wall installations the anchor opens like a toggle bolt.
DRILL SIZE 1/4" 3/8"
WALL THICKNESS 1/2" Drywall 5/8" Drywall
See B15 For Kits ( NTK14L & NTK38L )
ST36 ST25
UPC
10536 10525
SCREW/SIZE 3/16 x 4" 1/4 x 4"
DRILL SIZE 1/2" 1/2"
WALL THICKNESS 2-1/2" 2-1/2"
See B15 For Kits
UNIT
0.07# 0.09# 0.17# 0.27# 0.42# 0.53#
Ea Ea Ea Ea Ea Ea
• Caution! Always Wear Eye Protection
STD MSTR WT/STD UNIT 100 100
The Strap-Toggle is a heavy duty hollow wall anchor designed for use in base materials such as plaster, wallboard, or hollow tile. The Strap Toggle is a pre-assembled anchor consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. It is available in both 3/16" and 1/4" size. When compared to traditional toggles, this unique anchor can be installed in a smaller hole and does not require a fixture or screw to set it. The anchor can be easily adjusted to accommodate a wall thickness of up to 2-1/2". The toggle remains captive.
CAT NO
WT/STD
• Toggle Anchors • Nylon • Screws Not Provided
Strap Toggle PC 4375
B4
• Medium Duty • Tool Not Included • Caution! Always Wear Eye Protection
1000 1000
0.26# 0.51#
• Strap Toggle • Nylon • Screws Not Provided • Reusable
C C
• Caution! Always Wear Eye Protection
STD MSTR WT/STD UNIT 50 50
250 250
1.64# 1.66#
C C
To Order: Phone (323)725-1000 / Fax (323)721-0000
Wall Grip / Wall Drive Anchors PC 4435
CAT NO
Wall Grip WG18S WG18L WG316S WG316L WG14S WG14L
UPC
31400 31402 31404 31406 31408 31410
• Steel • Caution! Always Wear Eye Protection
SIZE
GRIP RANGE
1/8" 1/8"
1/8"-1/2" 1/8"-13/16"
1/8" 1/8" 3/16" 3/16" 1/4" 1/4"
Wall Drive Anchors 18SD 31412 18SLD 31414
Lag Shields PC 4450
• Lag Shields • Short & Long Styles • Zamac Metal
CAT NO
HLS (Short) HLS14 HLS516 HLS38 HLS12
UPC
for Hard Masonry 31200 1/4" 31205 5/16" 31210 3/8" 31215 1/2"
SLS (Long) for Soft Masonry SLS14 31230 1/4" SLS516 31235 5/16" SLS38 31240 3/8" SLS12 31245 1/2"
Pipe Spike PC 4380
• One Piece Design • Vibration Resistant • Approved for Overhead
CAT NO
PS25 PS38
UPC
81492 81493
DIA
1/2" 1/2” 5/8" 3/4" 1/2" 1/2" 5/8" 3/4"
CAT NO
CWC
UPC
81936
5/16" 5/16" 3/8" 3/8" 1/2" 1/2"
STD
MSTR
100 100
1000 1000
100 100 50 50 50 50
1000 1000 500 500 500 500
WT/STD UNIT 1.20# 1.70# 1.70# 2.04# 2.45# 2.94#
1.40# 1.75#
C C C C C C
C C
Lag shields: Allows for using lag screws in materials such as mortar joints, poured concrete, brick and concrete blocks.
MIN DEPTH 1" 1-1/4" 1-3/4" 2"
1-1/2" 1-13/16" 2-1/2" 3"
TENSILE
STD
MSTR
1600# 1700# 1800# 2750#
50 50 50 25
500 500 500 250
1450# 1500# 1600# 2000#
100 100 50 25
1000 1000 500 250
WT/STD UNIT 1.98# 2.68# 2.30# 2.07#
C C C C
3.90# 5.40# 2.30# 2.07#
C C C C
The Pipe Spike is designed primarily for use when hanging threaded rod. Using a special manufacturing process the anchor is formed with a "S" shaped configuration at the working end of the anchor to create an expansion mechanism. As the anchor is driven into the hole, the expansion mechanism is compressed and flexes to the size of the hole.
SIZE 1/4" 3/8"
CONTENTS
Pipe Spike for 1/4" Rod Hanging Pipe Spike for 3/8" Rod Hanging
Pre-Tied Ceiling Wire With Clip PC 4385 • 12 Gauge Wire • Includes 1-1/4” Pin & Clip
DRILL
1/8"-1/2" 5/8"-7/8" 1/8"-5/8" 5/8"-1-3/16" 1/8"-5/8" 5/8"-1-3/16"
• Caution! Always Wear Eye Protection
SIZE
Wall Grip Anchors: Also known as “Mollies” or Molly Bolts. Made for hollow wall installations. When tightened, the body pulls up to enable the anchor to secure itself to very thin walls such as paneling.
ANCHORS & KITS > ANCHORS
• Wall Grip / Wall Drive • Drive Style Anchor Does Not Require a Predrilled Hole
• Galvanized Finish • ICC# ESR1530
DESCRIPTION
STD 100 50
MSTR WT/STD UNIT 600 300
4.00# 4.00#
C C
Pre-Tied Ceiling Wires are installed with low velocity powder actuated tools in poured concrete deck.
6' Pre-Tied ceiling wire with 1-1/4" Pin & Clip
See new products at lhdottie.com
STD 100
MSTR WT/STD UNIT 100
22.00#
C
B5
Drop In Anchors PC 4500, 4310
ANCHORS & KITS > DROP IN ANCHORS > SLEEVE ANCHORS
Drop In Anchors: This steel anchor performs well in a variety of concrete strengths. Can be used in brick. Any head style screw can be used. The screw can easily be removed or loosened and retightened. Drill hole in concrete and drop anchor into hole. Place setting tool over anchor and hammer until set.
CAT NO
UPC
ANCHOR SIZE DRILL SIZE REQUIRED TOOL
Steel Zinc Plated - PC 4500 DA25 27600 1/4-20 DA38 27605 3/8-16 DA50 27610 1/2-13 DA58 27615 5/8-11 DA75 27620 3/4-10
3/8" 1/2" 5/8" 7/8" 1"
Stainless Steel - PC 4310 DAS25 70260 1/4-20 DAS38 70262 3/8-16 DAS50 70264 1/2-13 DAS58 70266 5/8-11 DAS75 70268 3/4-10
AT25 AT38 AT50 AT58 AT75
3/8" 1/2" 5/8" 7/8" 1"
AT25 AT38 AT50 AT58 AT75
( “AT” Tool - SOLD SEPARATELY - Must Be Used For Proper Installation )
STD 100 50 50 25 10
100 50 50 25 10
MSTR WT/STD
1000 500 250 125 50
2.00# 3.00# 6.00# 6.00# 4.80#
1000 500 250 125 50
2.00# 3.00# 6.00# 6.00# 4.80#
UNIT C C C C C
C C C C C
“AT” Tool For DA Anchors PC 4510
“AT” tool must be used for proper installation. Sold separately from DA/DAS anchors
CAT NO AT25 AT38 AT50 AT58 AT75
UPC
27630 27635 27570 27575 27580
SIZE 1/4" 3/8" 1/2" 5/8" 3/4"
ANCHOR TYPE
STD
DA25/DAS25 DA38/DAS38 DA50/DAS50 DA58/DAS58 DA75/DAS75
1 1 1 1 1
MSTR
Sleeve Anchors - Zinc Plated PC 4550
10 10 10 10 10
Sleeve Anchors: Similar to the wedge anchor. It can be used in the same materials as the wedge anchor, but can also be used in soft concretes because the compression load can be distributed over a longer length. Can be installed through the fixture. Assemble nut and washer on stud and insert into predrilled hole. Anchor is hammered into hole until the nut is seated. CAT NO
UPC
Hex Nut SA516112 SA516212
59334 59336
Acorn Nut SA14138 SA14214
SA38178 SA38300 SA12214 SA12300 SA12400
B6
• Caution! Always Wear Eye Protection
• Drop In • Zinc Plated Steel • Stainless Steel
SIZE
BOLT LENGTH
59330 59332
1/4 x 1-3/8" 1/4 x 2-1/4"
1-21/32" 2-9/16"
59338 59340
3/8 x 1-7/8" 3/8 x 3"
2-3/16" 3-5/16"
59342 59344 59346
5/16 x 1-1/2" 5/16 x 2-1/2" 1/2 x 2-1/4" 1/2 x 3" 1/2 x 4"
1-13/16" 2-11/16" 2-7/8" 3-3/8" 4-3/8"
DRILL DIA 1/4" 1/4"
5/16" 5/16" 3/8" 3/8" 1/2" 1/2" 1/2"
MIN. EMBED
STD
MSTR
100 100
600 500
100 100
1-5/8" 1-5/8"
50 50
2-1/8" 2-1/4" 2-1/4"
25 25 25
UNIT
0.14# 0.25# 0.41# 0.55# 0.77#
• Sleeve • Hex or Acorn Nut • Zinc Plated
1-1/8" 1-1/8" 1-3/8" 1-1/2"
WT/STD
600 600
300 250 150 150 150
Ea Ea Ea Ea Ea
• Available In Larger Diameters & Lengths
WT/STD
2.75# 3.25# 4.25# 5.75#
3.50# 5.00# 3.50# 4.30# 5.50#
UNIT C C C C
C C C C C
To Order: Phone (323)725-1000 / Fax (323)721-0000
Wedge Anchors Full Thread Zinc Plated - PC 4540
CAT NO
• Available In Larger Diameters & Lengths
UPC
W14134 W14214 W14314
59300 59302 59304
W12234 W12334 W12400 W12512
59312 59313 59314 59316
W38214 W38234 W38300 W38334 W38500
59306 59307 59308 59310 59311
• Caution! Always Wear Eye Protection
Wedge anchors can be installed through the fixture. Assemble nut and washer until the nut is flush with the top of the anchor, insert into predrilled hole. Hammer anchor into hole until the washer is flush with surface of the fixture. Expand the anchor
ANCHOR OVERALL THREAD HOLE DIA LENGTH LENGTH 1/4-20 1/4-20 1/4-20
1-3/4" 2-1/4" 3-1/4"
3/4" 1-1/4" 2-1/4"
1/2-13 1/2-13 1/2-13 1/2-13
2-3/4" 3-3/4" 4-1/2" 5-1/2"
1-3/8" 2-3/8" 3-1/8" 4-1/8"
3/8-16 3/8-16 3/8-16 3/8-16 3/8-16
2-1/4" 2-3/4" 3" 3-3/4" 5"
1-1/4" 1-5/8" 1-7/8" 2-5/8" 3-7/8"
STD
MSTR
50 50 50 50 50
300 300 300 300 300
100 100 100
600 600 600
50 50 50 50
200 200 200 150
WT/STD UNIT 3.00# 3.50# 4.75#
C C C
9.00# 11.50# 14.00# 16.00#
C C C C
4.37# 4.75# 5.37# 6.37# 7.75#
C C C C C
The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting a length.
Wedge Anchors Full Thread Stainless Steel PC 4310 • Wedge • Full Thread • Stainless Steel
CAT NO
UPC
WS38214 WS38234 WS38300 WS38334 WS38500
70320 70322 70324 70326 70328
WS14134 WS14214 WS14314
70310 70312 70314
WS12234 WS12334 WS12400 WS12512
70340 70342 70344 70346
ANCHORS & KITS > WEDGE ANCHORS
• Wedge • Full Thread • Zinc Plated
Stainless Steel Wedge Anchors resist corrosion and are ideal • Available In Larger Diameters for applications where chemical resistance is required. Stainless can be mildly magnetic. ICC Approval (Pending). & Lengths
ANCHOR OVERALL THREAD HOLE DIA LENGTH LENGTH 1/4-20 1/4-20 1/4-20
3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 1/2-13 1/2-13 1/2-13 1/2-13
1-3/4" 2-1/4" 3-1/4"
2-1/4" 2-3/4" 3" 3-3/4" 5" 2-3/4" 3-3/4" 4-1/2" 5-1/2"
3/4" 1-1/4" 2-1/4"
1-1/4" 1-5/8" 1-7/8" 2-5/8" 3-7/8" 1-3/8" 2-3/8" 3-1/8" 4-1/8"
STD
MSTR
50 50 50 50 50
300 300 300 300 300
100 100 100
600 600 600
50 50 50 50
200 200 200 150
WT/STD UNIT 3.00# 3.50# 4.75#
C C C
4.37# 4.75# 5.37# 6.37# 7.75#
C C C C C
9.00# 11.50# 14.00# 16.00#
C C C C
The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting a length.
A
1. Use a carbide bit (ANSI) B94 12) the same size as the bolt dia. Drill hole deeper than bolt embed. (min. 4.5 dia.) Do not use core bits. Maintain accurate hole size. 2. Clean hole debris 1 2 3. Add washer + thread nut flush with top of bolt. Drive bolt into hole thorough item to be fastened. 4. To set, tighten nut 3-4 full turns or consult chart for guide installation torque. NOTE: Using in concrete cured less than 28 days will greatly reduce anchor strength. WARNING: WEAR SAFETY GOGGLES
See new products at lhdottie.com
Terminology Anchor Diameter (A)
Thread Length (B)
3 turns of nut (approx. 1/2 bolt dia.) + B B Nut & washer thickness (approx. 1 bolt dia.) + C C Fixture thickness + D Minimum embedment (min. 4112 bolt dia.) = D Minimum Anchor Length If minimum anchor length falls between 2 sizes, use longer size. The maximum recommended anchor embedment should be 80% of the base material thickness. If a concrete slab is 10” thick, an 8” depth would be the maximum recommended anchor embedment. A
Installation
T A L K Anchor Length (C) Embedment (D)
Selection
T E C H
Pull Out Shear
B7
ANCHORS & KITS > ROD HANGING SYSTEM > STEEL
CAT NO
#3 For Purlins SSM14B B SSM38BR B N #5 For Beams SSM12BR B N
Mount Direction:
B
CAT NO
#3 For Purlins SSM14S S SSM38SR S N Mount Direction:
S
17591 17592
ROD SIZE
SCREW SHANK SIZE/LENGTH
POINT STYLE
SELF DRILLING RANGE
STD MSTR WT/STD UNIT
1/2"
12-24 x 1-1/2"
#5
0.188" – 0.500"
100
1/4" 3/8"
17597
1/4"-20 x 1" 1/4"-20 x 1-1/2"
= Bottom Mount
UPC
17593 17594
B
= Bottom Mount With Nut
SCREW SHANK SIZE/LENGTH
1/4" 3/8"
1/4"-20 x 1" 1/4"-20 x 1-1/2"
S
N
POINT STYLE
= Side Mount With Nut
SCREW SHANK
B S B
N
S
N
B
N
Mount Direction:
0.036" – 0.188" 0.036" – 0.188"
100 100
600 500
B
1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1-1/2" 1/4"-20 x 1-1/2" 12-24 x 1-1/2"
= Bottom Mount
7.50# 8.01#
500
8.01#
C C
C
Steel Side Mount Rod Hangers PC 4600
ROD SIZE
= Side Mount
N
#3 #3
SELF DRILLING RANGE
#3 #3
0.036" – 0.188" 0.188" – 0.520"
STD MSTR WT/STD UNIT 100 100
600 500
ULTIMATE LOAD CAPACITIES INSTALLED IN MINIMUM ASTM A 36 STEEL (PURLINS AND BEAMS)
ROD DIA
1/4" 1/4" 3/8" 3/8" 1/2"
UPC
Steel Bottom Mount Rod Hangers PC 4600
B
N
20
1,550 1,550 1,550 1,550 -
STEEL GAUGE (THICKNESS) 18 16 14 12
1,550 1,550 1,550 1,550 -
= Bottom Mount With Nut
S
1,775 1,775 1,775 1,775 920
= Side Mount
1,775 1,775 1,775 1,775 1,560
S
N
2,050 2,050 2,050 2,050 2,050
7.30# 7.00#
3/16"
3,850 3,850 3,850 3,850 3,280
= Side Mount With Nut
C C
1/4"
5,040 2,050 5,040 2,050 5,040
Dottie Steel Rod Hangers loaded perpendicular to the threaded rod (shear) the ultimate load capacity for the anchor is 1,965 lbs in nominal 20 guage steel (0.036”). Steel Dottie Rod Hangers are recommended to be installed with the Universal Steel & Wood Nut Driver UNIB.
Steel Rod Hanger
B8
Wood Rod Hanger
Concrete Rod Hanger
To Order: Phone (323)725-1000 / Fax (323)721-0000
Wood Bottom Mount Rod Hangers PC 4600 SSW14B B SSW38B B SSW38BUL SSW12B B
UPC
B
Mount Direction:
* B
17586 17587 17582 17581
ROD SIZE
SCREW SHANK SIZE/LENGTH
1/4" 3/8" 3/8" 1/2"
1/4" 1/4" 3/8" 3/8"
= Bottom Mount
x x x x
2" 2" 2-1/2" 2-1/2"
Wood Side Mount Rod Hangers PC 4600 CAT NO
SSW14S S SSW38S S SSW38SUL
UPC
S
Mount Direction:
* S
17588 17589 17590
ROD SIZE
= Side Mount
SCREW SHANK SIZE/LENGTH
1/4" 3/8" 3/8"
1/4" x 2" 1/4" x 2" 3/8" x 2-1/2"
SCREW SHANK SIZE/LENGTH
B S B S B S
Mount Direction:
Type Type Type Type
17 17 17 17
POINT STYLE
Type 17 Type 17 Type 17
1/8" 1/8" 1/8" 1/8"
PRE-DRILL (IF REQUIRED) 1/8" 1/8" 1/8"
B
B
= Bottom Mount
S
1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8"
x x x x x x x
2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2"
= Side Mount
EMBED DEPTH
What is the Dottie Rod Hanging System For? Pipe hanging Conduit Eye rod Cable trays Lighting systems Strut channels Overhead utilities Sprinkler systems Drop ceilings HVAC duct Electrical Refrigeration
FIR (LBS)
2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2"
T E C H
• • • • • • • • • • • •
PRE-DRILL (IF REQUIRED)
STD MSTR WT/STD UNIT 100 100 100 100
500 500 300 300
685 1,510 1,510 1,800 2,670 1,450 2,670
C C C C
* = U/L listed
100 100 100
500 500 300
PINE (LBS)
650 1,510 1,510 1,800 3,110 1,530 3,110
7.40# 7.40# 8.60#
C C C
* = U/L listed
SPRUCE (LBS)
650 1,510 1,510 1,800 3,110 1,380 3,110
T A L K
Who Uses the Dottie Rod Hanging System?
• Plumbers • Maintenance Contractors • Electricians • Sprinkler Contractors • Mechanical Contractors • HVAC Contractors
See new products at lhdottie.com
8.04# 7.10# 9.00# 9.00#
STD MSTR WT/STD UNIT
ULTIMATE LOAD CAPACITIES INSTALLED IN WOOD BASE MATERIALS (STRUCTURAL WOOD & TIMBER)
ROD DIA
1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2"
POINT STYLE
ANCHORS & KITS > ROD HANGING SYSTEM > WOOD
CAT NO
Why the Dottie Rod Hanging System?
Competitive advantages: • Lower “IN-PLACE” cost • Simple to install • FAST • 1 Socket for Wood & Steel • 1 System for all rod hanging • L.H. Dottie Support • 15 Year performance warranty
B9
Concrete Bottom Mount Rod Hangers PC 4600
ANCHORS & KITS > ROD HANGING SYSTEM > CONCRETE
CAT NO
SSC14B
SSC38B
SSC12B
UPC
81215
B
18550
B
B
Mount Direction:
ROD DIA
1/4" 3/8" 1/2"
81216 B
ROD SCREW SHANK SIZE SIZE/LENGTH 1/4"
1/4" x 1-1/4"
1/2"
3/8" x 2-3/4"
3/8"
= Bottom Mount
1/4" x 1-1/2"
SCREW SHANK SIZE/LENGTH
1/4" x 1-1/4" 1/4" x 1-1/2" 3/8" x 2-3/4"
B B B
THREAD STYLE
ANSI Wedge-Bolt Thread ANSI Wedge-Bolt Thread ANSI Wedge-Bolt Thread
PRE-DRILL DIAMETER 1/4" ANSI
1/4" ANSI
3/8" ANSI
STD MSTR WT/STD UNIT 100
600
2.92#
C
50
250
8.00#
C
100
600
ULTIMATE LOAD CAPACITIES INSTALLED IN NORMAL WEIGHT CONCRETE
ANSI DRILL BIT DIA
1/4" 1/4" 3/8"
EMBED DEPTH
1-1/4" 1-1/2" 2-3/4"
MAX 2000 PSI CLAMPING TENSION SHEAR TORQUE (LBS) (LBS) FT.-LBS.
8 8 35
1,390 1,810 1,760 2,580 5,320 5,250
4000 PSI TENSION SHEAR (LBS) (LBS)
1,950 2,440 2,595 2,640 6,050 6,330
ROD DIA
1/4" 3/8" 1/2"
SCREW SHANK SIZE/LENGTH B B B
1/4" x 1-1/4" 1/4" x 1-1/2" 3/8" x 2-3/4"
ANSI DRILL BIT DIA
1/4" 1/4" 3/8"
EMBED DEPTH
1-1/4" 1-1/2" 2-3/4"
MAX CLAMPING TORQUE FT.-LBS.
8 8 35
CENTER OF WEB (LBS)
2,775 3,700 8,240
C
6000 PSI TENSION SHEAR (LBS) (LBS)
Mount Direction: B = Bottom Mount Dottie's Concrete Rod Hangers must be installed with an ANSI approved SDS Drill Bit and appropriate Concrete Nut Driver. * ANSI approved SDS Drill Bits see page E4
ULTIMATE TENSION LOAD CAPACITIES INSTALLED IN NORMAL HOLLOW CORE PLANK
4.70#
Mount Direction: B = Bottom Mount Dottie's Concrete Rod Hangers are recommended to be installed with the appropriate ANSI Drill Bit and Concrete Nut Driver.
2,070 2,570 2,770 2,700 8,620 7,410
CENTER OF OF CORE (LBS)
1,920 2,570 3,480
Tabulated load values are for anchors installed in 8-inch thick hollow core plank with a minimum compressive strength of 4,000 psi at the time of installation. The 4' x 6' normal-weight concrete member features include 1-1/2" cover above and below cores and a minimum web thickness of 1-1/2". Data is in accordance with latest acceptance criteria and ASTM Standards. Depending on fastener application and governing building code, ultimate load capacities should be reduced by a minimum safety factor to determine the allowable working load. NFPA 13 Fire Protection requirements are 5 times the weight of the liquid (water) filled pipe plus 250 lbs. Consult the engineer of record.
Factory Mutual Approval - File No. J.I. 3015153
Underwriters Laboratories File No. EX1289 ICC Approval (Pending)
SSD Display Available Upon Request
B10
To Order: Phone (323)725-1000 / Fax (323)721-0000
Rod Hanging System Accessories PC 4605 UPC
SCP14**
81217
SCP50**
81248
Nut Drivers 17595 UNIB* SCP38** SS3009
Pole Tool PT612
81218 11209
81220
SOCKET DESCRIPTION
* Steel & Wood Universal Side & Bottom Installation Tool 1/4" Concrete Installation Tool 3/8" Concrete Installation Tool 1/2" Concrete Installation Tool Installation Tool Kit for Concrete Anchors
Steel Dottie Rod Hanger Beam Clamp
Save $2.80 WOOD BASE MATERIAL
Save
Wood Dottie Rod Hanger Hanger Bolt Rod/Coupler
Save $4.35 CONCRETE BASE MATERIAL
SPEED OF INSTALLATION
Red
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
1
10 1
0.25# 2.92#
7.30#
Ea
Ea
Ea
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
SPEED OF INSTALLED INSTALLATION COST INSTALLATION
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
Fast Slow 53%
Fast Medium
Save 67%
INSTALLED COST
1
5
INSTALLATION
Low High
Low High
Very Easy Average Easy Medium
SPEED OF INSTALLED INSTALLATION COST INSTALLATION
Concrete Dottie Rod Hanger Medium Steel Dropin Slow
Save $4.22
500 – 1500 RPM drill speed
USAGE COLOR STD MSTR WT/STD UNIT
6' - 12' Pole Tool (includes three Jaw Chuck)
Save in Installation Costs STEEL BASE MATERIAL
SUGGESTED GUIDELINES
*UNIB
Save 44%
Low High
Easy Hard
$0.77 $0.77
$0.77 $0.77
1 4
1 5
$0.77 $3.08
$0.77 $3.85
$1.73 $2.22
$1.42 $.073
$2.50 $5.30
$2.19 $6.54
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
5 11
$3.85 $8.47
$1.42 $1.02
$5.27 $9.49
*Labor rates based on ENR 20-City average of hourly pay scales for Electricians, Plumbers and Steamfitters, report dated June 2002.
T E C H
Installation Procedure
T A L K
ANCHORS & KITS > ROD HANGING SYSTEM > ACCESSORIES
CAT NO
**SCP Series
Always wear eye protection. Hanging System fastener into fastener with a smooth steady the socket driver, and install motion until the coupling is If pre-drilling is required, select perpendicular to the base firmly seated against the the recommended drill bit type material surface. Drive the and diameter. Drill to the surface of the base material. appropriate embedment Thread the appropriate STEEL CONCRETE WOOD depth, adding at least one diameter steel threaded diameter (1/4” to 1/2”) to rod or threaded bolt into the drilling depth to the coupling. The threadprevent the tip of the ed rod or bolt should fully fastener from running into a engage the thread length dead end at the rear of the of the coupling on a anchor hole. Select the vertical mount fastener. appropriate socket driver for the anchor size and type Please visit the Dottie to be installed and mount website at lhdottie.com into chuck of installation for approvals. tool. Insert the Dottie Rod
See new products at lhdottie.com
B11
Concrete Anchoring System Hi-Low Thread - PC 4560
ANCHORS & KITS > CONCRETE ANCHORS
Faster to install than most steel anchors, yet has significant load capacities. One tool drills the hole and sets the anchor without the need to remove from the drill chuck. Has the added advantage of close to edge fastening without potential breakout. Works in poured concrete, prestressed concrete, cinder block, brick, and mortar, and can be loosened for adjustment or removed. ICC Approval (Pending).
CAT NO
36H114 36H134 36H214 36H234 36H314
14H114 14H134 14H214 14H234 14H314 14H334 14H400 36P114 36P134 36P214 36P234 36P314 14P114 14P134 14P214 14P234 14P314 14P334 14P400
ANCHOR HEX/PHILLIPS DRILL SIZE BIT SIZE SIZE
UPC
11208 11288 11368 11448 11528
25208 25288 25368 25448 25528 25608 25648 11201 11281 11361 11441 11521
25201 25281 25361 25441 25521 25601 25641
Hex Head Slotted 3/16"
Hex Head Slotted 1/4"
Flat Head Phillips 3/16"
Flat Head Phillips 1/4"
3/16 3/16 3/16 3/16 3/16
x x x x x
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4"
1/4" 1/4" 1/4" 1/4" 1/4"
5/32 5/32 5/32 5/32 5/32
x x x x x
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2"
3/16 3/16 3/16 3/16 3/16
x x x x x
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4"
#2 #2 #2 #2 #2
5/32 5/32 5/32 5/32 5/32
x x x x x
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2"
1/4 1/4 1/4 1/4 1/4 1/4 1/4
x x x x x x x
1/4 1/4 1/4 1/4 1/4 1/4 1/4
x x x x x x x
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" 3-3/4" 4"
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" 3-3/4" 4"
5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16"
#2 #2 #2 #2 #2 #2 #2
• Ceramic Coated Blue Finish • Includes Drill • Caution! Always Wear Eye Protection
• Concrete Anchor System • Hex Head Slotted or Flat Head Phillips • Hi-Low Thread
3/16 3/16 3/16 3/16 3/16 3/16 3/16
3/16 3/16 3/16 3/16 3/16 3/16 3/16
x x x x x x x
x x x x x x x
STD
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 5-1/2" 5-1/2"
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 5-1/2" 5-1/2"
100 100 100 100 100
MSTR WT/STD UNIT
100 100 100 100 100 100 100
500 500 500 500 500
0.89# 1.07# 1.30# 1.51# 1.87#
C C C C C
500 500 500 500 500
0.84# 1.04# 1.28# 1.45# 1.77#
C C C C C
500 500 500 500 500 500 500
100 100 100 100 100
100 100 100 100 100 100 100
500 500 500 500 500 500 500
1.44# 1.83# 2.26# 2.96# 3.02# 3.41# 3.62#
1.39# 1.85# 2.05# 2.53# 2.96# 3.38# 3.61#
C C C C C C C
C C C C C C C
Installation Tool - Phillips & Hex Head PC 4590
Installation tool installs all lengths of both phillips & hex head concrete screws. Consists of one each: Masonry drill bit holder; Phillips socket driver with one #2 & one #3 Phillips bit; 1/4" Hex socket driver; 5/16" Hex socket driver & Allen wrench.
CAT NO IT1000
UPC
DESCRIPTION
14495
Installation Tool
STD 1
MSTR
• Phillips or Hex Head • Accommodates All Lengths • Storage Box
WT/STD
1
1.50#
UNIT Ea
Hammer Drill Carbide Tipped Masonry Drill Bits PC 4570
Hammer Drills (CD Series) made specifically for Concrete Screw Anchoring System and are manufactured with closer tolerances.
CAT NO
CD5323 CD5324 CD5325
CD3163 CD3164 CD3165
UPC
14500 14502 14504
14506 14508 14510
ANCHOR SIZE
5/32"
3/16"
SDS Rotohammer Bits See Page E4
B12
3/16" 3/16" 3/16"
1/4" 1/4" 1/4"
• Carbide Tipped • Close Tolerances
DRILL SIZE
STD
3/16 x 3-1/2" 3/16 x 4-1/2" 3/16 x 5-1/2"
10 10 10
5/32 x 3-1/2" 5/32 x 4-1/2" 5/32 x 5-1/2"
10 10 10
• Caution! Always Wear Eye Protection
MSTR WT/STD 10 10 10
10 10 10
0.22# 0.22# 0.24#
0.25# 0.27# 0.29#
UNIT Ea Ea Ea
Ea Ea Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
Anchor Kits PC 4610
CAT NO
UPC
D-DISPLAY PACK T-TUFF PACK
6 x 1 Sheet Metal Screws RD2 30460 D RD2TP 30465 T 30463 D RD2HX RD2HXTP 30461 T 1AK 29630 D 1AKTP 29632 T
8 x 1 Sheet Metal Screws 30467 D RD3 RD3TP 30469 T RD3HX 30471 D RD3HXTP 30473 T RD3DD 30475 D RD3DDTP 30477 T 10 x 1 Sheet Metal K6CO 29625 K6COTP 29627 K6HX 29621 K6HXTP 29622 K7DC 16945 K7DCTP 16947 2AK 59200 2AKTP 59202 2AKHX 59203 2AKHXTP 59204 2AKDD 59207 2AKDDTP 59206 K6D 29600 K6DTP 29602
Screws D T D T D T D T D T D T D T
SCREW TYPE
Phillips/Slotted Phillips/Slotted Hex/Slotted Hex/Slotted Phillips/Slotted Phillips/Slotted
Phillips/Slotted Phillips/Slotted Hex/Slotted Hex/Slotted Square Drive Square Drive
Dottie is an industry leader in Anchor Kits. We offer a comprehensive variety for almost any imaginable need.
ANCHOR TYPE
#21 Red Collar #21 Red Collar #21 Red Collar #21 Red Collar #121 White Wing #121 White Wing
#22 #22 #22 #22 #22 #22
Red Red Red Red Red Red
Collar Collar Collar Collar Collar Collar
Phillips/Slotted #22 Red Collar Phillips/Slotted #22 Red Collar Hex/Phil/Slotted #22 Red Collar Hex/Phil/Slotted #22 Red Collar Square Drive #22 Red Collar Square Drive #22 Red Collar Phillips/Slotted #122 Yellow Wing Phillips/Slotted #122 Yellow Wing Hex/Phil/Slotted #122 Yellow Wing Hex/Phil/Slotted #122 Yellow Wing Square Drive #122 Yellow Wing Square Drive #122 Yellow Wing Phillips/Slotted #222 Green Str. Phillips/Slotted #222 Green Str.
12 x 1-1/2 Sheet Metal Screws ( 50 Screws, 50 Anchors ) K14C 29615 D Phillips/Slotted #23 Red Collar K14CTP 29617 T Phillips/Slotted #23 Red Collar
K14CHX 29550 K14CHXTP 29552 K14CDD K14CDDTP 3AK 3AKTP
29554 29556 29635 29637
D T D T D T
Triple Grip Kits Contain: TG6KTP 81647 TG6KSQTP 81649 TG6KHXTP 81651 Triple Grip Kits Contain: TG8KTP 81653 TG8KSQTP 81655 TG8KHXTP 81657 Triple Grip Kits Contain: TG10KTP 81659 TG10KSQTP 81661 TG10KHXTP 81663 Triple Grip Kits Contain: TG12KTP 81665 TG12KSQTP 81667 TG12KHXTP 81669
Hex/Slotted Hex/Slotted
Square Drive Square Drive Phillips/Slotted Phillips/Slotted
#23 Red Collar #23 Red Collar
#23 Red Collar #23 Red Collar #123 Yellow Wing #123 Yellow Wing
100 6 x 1-1/4" Screws, 100 #6 Anchors #6 Phillips/Slotted #6 Beige #6 Square Drive #6 Beige #6 Hex/Slotted #6 Beige 100 8 x 1-1/4" Screws, 100 #8 Anchors #8 Phillips/Slotted #8 Gray #8 Square Drive #8 Gray #8 Hex/Slotted #8 Gray 100 10 x 1-1/2" Screws, 100 #10 Anchors #10 Phillips/Slotted #10 Blue #10 Square Drive #10 Blue #10 Hex/Slotted #10 Blue 50 12 x 1-1/2" Screws, 50 #12 Anchors #12 Phillips/Slotted #12 Green #12 Square Drive #12 Green #12 Hex/Slotted #12 Green
See new products at lhdottie.com
DRILL STD MSTR WT/STD UNIT 3/16" 3/16" 3/16" 3/16" 3/16" 3/16"
1 1 1 1 1 1
10 6 10 6 10 6
0.59# 0.59# 0.54# 0.54# 0.60# 0.60#
Ea Ea Ea Ea Ea Ea
1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1 1 1 1 1 1
10 6 10 6 10 6
0.83# 0.83# 0.82# 0.82# 0.84# 0.84#
Ea Ea Ea Ea Ea Ea
5/16" 5/16"
1 1
10 6
0.95# 0.95#
Ea Ea
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1 1 1 1 1 1 1 1 1 1 1 1 1 1
10 6 10 6 10 6 10 6 10 6 10 6 10 6
1.03# 1.03# 1.05# 1.05# 1.01# 1.01# 1.11# 1.11# 1.04# 1.04# 1.06# 1.06# 1.02# 1.02#
Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea
5/16" 5/16"
1 1
10 6
0.99# 0.99#
Ea Ea
1/4" 1/4" 1/4"
1 1 1
6 6 6
0.80# 0.80# 0.80#
Ea Ea Ea
5/16" 5/16" 5/16"
1 1 1
6 6 6
1.30# 1.30# 1.30#
5/16" 5/16" 5/16" 5/16"
1/4" 1/4" 1/4"
3/8" 3/8" 3/8"
1 1 1 1
1 1 1
1 1 1
10 6 10 6
6 6 6
6 6 6
0.99# 0.99# 0.95# 0.95#
0.90# 0.90# 0.90#
1.30# 1.30# 1.30#
ANCHORS & KITS > ANCHOR KITS
• Display or Tuff Pack • Caution! Always Wear Eye Protection
• 100 Sheet Metal Screws • 100 Anchors • Carbide Masonry Drill
Ea Ea Ea Ea
Ea Ea Ea
Ea Ea Ea
Ea Ea Ea
B13
Wall Dog - Phillips / Square / Hex PC 4731
ANCHORS & KITS
CAT NO
WDOG
UPC
• Self-drills small hole in wallboard • Installs quickly and easily with a Phillips screwdriver • Can be easily backed-out • No need for shields • Case hardened steel anchor • No hole spotting • Installs in wallboard, plywood, concrete, hollow or grout filled block, brick and plaster DESCRIPTION
31395
100 Chrome Phillips Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2PL Phillips Power Bit 100 White Phillips Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2PL Phillips Power Bit 100 Chrome Square Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2L Square Drive Power Bit 100 Chrome Hex Drive Wall Dog 1 3/16" Carbide Tip Drill Bit 1 MT10 Magnetic Hex Bit
WDOGW 31396 SQDOG
16290
HXDOG
81016
• No second step, installs directly through fixture into wallboard • Patented design provides for smooth entry, clean cutting and a powerful hold • Thread design prevents spinning and stripping • Heat treated point penetrates metal and wood studs • When removed it leaves a much smaller hole than toggles or other systems STD
MSTR
WT/STD
UNIT
1
10
1.67#
Ea
1
10
1.67#
Ea
1
10
1.67#
Ea
1
10
1.67#
Ea
Wall Driller Kits • Phillips / Square / Wafer PC 4730
CAT NO
UPC
Phillips / Slotted WDK6 29780 WDK6T 29855 WDK6N 29781 WDK6NT 29857 WDK8 29786 WDK8T 29862 WDK8N 29787 WDK8NT 29864
Square Drive WDK6SQ WDK6SQT WDK6NSQ WDK6NSQT WDK8SQ WDK8SQT WDK8NSQ WDK8NSQT
29790 29866 29791 29868 29796 29872 29797 29874
Wafer Head Phillips / WDK8W 81518 WDK8WT 81519 WDK8NW 81520 WDK8NWT 81521 WDK8WSQ WDK8WSQT WDK8NWSQ WDK8NWSQT
B14
81522 81523 81524 81525
• Easy To Spot • Reusable • Deep Threads
D-DISPLAY PACK T-TUFF PACK
D T D T D T D T
6 6 6 6 8 8 8 8
D T D T
8 8 8 8
D T D T
6 6 6 6
Square Drive D T D T D T D T
8 8 8 8 8 8 8 8
• Includes Bit • 50 Phillips/Square/Wafer Sheet Metal Screws
SCREW SIZE
ANCHOR BIT
x x x x x x x x
1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4"
Zinc Zinc Nylon Nylon Zinc Zinc Nylon Nylon
x x x x
1-1/4" 1-1/4" 1-1/4" 1-1/4"
Zinc Zinc Nylon Nylon
x x x x
x x x x x x x x
1" 1" 1" 1"
1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"
IB1P IB1P IB1P IB1P IB2P IB2P IB2P IB2P
• 50 Zinc or Nylon Anchors • Display or Tuff Pack
STD MSTR WT/STD UNIT 1 1 1 1 1 1 1 1
10 10 10 10 10 10 10 10
0.75# 0.75# 0.46# 0.46# 1.33# 1.33# 0.70# 0.46#
Ea Ea Ea Ea Ea Ea Ea Ea
Zinc Zinc Nylon Nylon
IB1 IB1 IB1 IB1
1 1 1 1
10 10 10 10
0.75# 0.75# 0.46# 0.46#
Ea Ea Ea Ea
Zinc Zinc Nylon Nylon
IB2P IB2P IB2P IB2P
1 1 1 1
10 10 10 10
1.33# 1.33# 0.70# 0.70#
Ea Ea Ea Ea
Zinc Zinc Nylon Nylon
IB2 IB2 IB2 IB2
IB2 IB2 IB2 IB2
1 1 1 1
1 1 1 1
10 10 10 10
10 10 10 10
1.33# 1.33# 0.70# 0.46#
1.33# 1.33# 0.70# 0.46#
Ea Ea Ea Ea
Ea Ea Ea Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
Driller Toggle Kits PC 4750
CAT NO
WDT83 WDT363 WDT43
UPC
81022 81023 81024
• Reusable • Metal/Engineered Plastic
STRENGTH
CONTENTS
YOU CAN DEPEND ON!
STD MSTR WT/STD UNIT
35-1/8" Driller Toggle (1/8" x 3" Truss Hd. Mach. Screws) 1 25-3/16" Driller Toggle (3/16" x 3" Truss Hd. Mach. Screws) 1 20-1/4" Driller Toggle (1/4" x 3" Truss Hd. Mach. Screws) 1
TEST RESULTS
DRYWALL THICKNESS
TENSION (LBS)
3/8" 1/2" 5/8"
87 106 160
6 6 6
1.10# 1.65# 1.65#
Ea Ea Ea
FEATURES • No Pre-Drilling • Quick & Easy • Ideal for Ceiling Applications • Combo Truss Head Screws • Versatile for 3/8", 1/2" and 5/8" Drywall! • Includes Phillips Power Bit
SHEAR (LBS)
231 253 285
NOTE: The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4 or greater to determine the allowable working load.
ANCHORS & KITS
• Driller Toggle • Includes Screws & Power Bit
Nylon Button Head and Toggle Anchor Kits PC 4610 • 100 Nylon Button Head Anchors With Pin • 1 Carbide Masonry Drill • Display or Tuff Pack
CAT NO
UPC
• 25 Nylon Toggle Anchors • 25 Sheet Metal Screws • 1 Carbide Masonry Drill • Display or Tuff Pack
D-DISPLAY PACK T-TUFF PACK
Nylon Button Head Anchors with Pins 711 711TP
714 714TP
18535 18537
18540 18545
D T
D T
Nylon Toggle Anchors with Screws
NTK14L NTK14LTP
NTK38L NTK38LTP
66797 66800
66799 66802
D T
D T
SIZE
3/16 x 1" 3/16 x 1"
1/4 x 1" 1/4 x 1"
8 x 1-1/2" 8 x 1-1/2"
10 x 1-1/2" 10 x 1-1/2"
ANCHOR TYPE DRILL STD MSTR WT/STD UNIT 1711 1711
3/16" 3/16"
1 1
10 10
0.67# 0.67#
Ea Ea
NT14L NT14L
1/4" 1/4"
1 1
10 10
0.39# 0.39#
Ea Ea
1714 1714
NT38L NT38L
1/4" 1/4"
3/8" 3/8"
1 1
10 10
1 1
10 10
0.72# 0.72#
0.49# 0.49#
Ea Ea
Ea Ea
Strap Toggle Kits PC 4735 • Strap Toggle • Nylon • Includes Screws • Reusable
The strap toggle is a heavy duty hollow wall anchor for use in base materials such as plaster, wallboard, or hollow tile. The strap toggle is a preassembled anchor consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. It is available in both 3/16" and 1/4" size. When compared to traditional toggles, this unique anchor can be installed in a smaller hole and does not require a fixture or screw to set it. The anchor can easily be adjusted to accommodate a wall thickness of up to 2-1/2". The toggle remains captive.
CAT NO
UPC
STK25
10526
STK36
10524
DESCRIPTION
STD
MSTR
1
10
25 3/16 x 4" Strap Toggles and 1 25 3/16 x 4" Mushroom Head Screws 25 1/4 x 4" Strap Toggles and 25 1/4 x 4" Mushroom Head Screws
See new products at lhdottie.com
10
WT/STD UNIT 1.67#
1.89#
Ea
Ea
B15
Fastener Kits PC 4760
ANCHORS & KITS > FASTENER KITS
Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need.
CAT NO
UPC
632
18140
632DD
29655
632PS
29657
832DS
29665
832PS
29660
1032PS
10323
1420PS
14205
DESCRIPTION
Stove Bolt Kits with Nuts 316 16560 1420
14200
Hex Nut Kit 339 17000
• Reusable Six Compartment Box • Handy Assortment
STD MSTR WT/STD UNIT
370 Assorted 6-32 Slotted Flat Head Machine Screws; 3/4" Thru 3" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 370 Assorted 6-32 Square/Phillips Flat Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 370 Assorted 6-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2", 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 310 Assorted 8-32 Square/Slotted Round Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 60 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 370 Assorted 8-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 245 Assorted 10-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 75 - 1/2", 50 - 3/4", 40 - 1", 30 - 1-1/4", 25 - 1-1/2", 25 - 2" 110 Assorted 1/4-20 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 30 - 1/2", 25 - 3/4", 20 - 1," 15 - 1-1/4", 10 - 1-1/2", 10 - 2" 220 Assorted 3/16 (10-24) Slotted Truss Head Stove Bolts with Hex Nuts; 1/2" Thru 2" 50 - 1/2", 50 - 3/4", 40 - 1", 30 - 1-1/4", 30 - 1 1/2", 20 - 2" 110 Assorted 1/4-20 Slotted Truss Head Stove Bolts with Hex Nuts; 1/2" Thru 2" 30 - 1/2", 25 - 3/4", 20 - 1", 15 - 1-1/4", 10 - 1-1/2" 339 Assorted Zinc Plated Hex Nuts 10 sizes: 6-32" Thru 5/8": 50 - 6-32", 50 - 8-32", 50 - 10-24", 25 - 10-32", 25 - 12-24", 75 - 1/4", 25 - 5/16", 30 - 3/8", 6 - 1/2", 3 - 5/8"
1
6
1.85#
Ea
1
6
1.88#
Ea
1
6
1.59#
Ea
1
6
2.31#
Ea
1
6
2.30#
Ea
1
6
3.13#
Ea
1
6
1.87#
Ea
1
6
2.82#
Ea
1
6
2.77#
Ea
1
6
2.60#
Ea
Machine Screw Kit • Truss Head PC 4760
Dottie introduces the Truss Head Combo Assorted Machine Screw Kit. Contractors speak and Dottie listens. These Truss Head Machine Screws are needed when installing wiring devices behind wall plates. Great when a low profile fastener is needed.
CAT NO
632TCS
B16
UPC
29658
DESCRIPTION
• Truss Head • Phillips / Slotted
STD
MSTR
370 Assorted 6-32 Slotted / Phillips 1 6 Truss Head Machine Screws; 1/2" thru 2" 100 - 1/2", 75 - 3/4, 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2"
• Low Profile • Zinc Plated
WT/STD 1.59#
UNIT Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
Fastener Kits PC 4760 CAT NO
UPC
#6 6PS
15015
6HX
15012
6TR
15017
#8 8PS
15021
8HX
59254
8TR
59258
#10 10PS
15031
10HX
59256
10TR
59260
• Handy Assortment
Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need.
DESCRIPTION
300 Assorted #6 Phillips/Slotted Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #6 Slotted Hex Washer Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #6 Square-Drive Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2"
STD MSTR WT/STD UNIT 1
6
1.24#
Ea
1
6
1.26#
Ea
1
6
1.27#
Ea
1
6
1.75#
Ea
1
6
1.76#
Ea
1
6
1.79#
Ea
2.35#
Ea
2.30#
Ea
2.22#
Ea
6
1.57#
Ea
1
6
1.84#
Ea
335 Assorted Wood Rockets 1 80 - 6 x 1", 70 - 6 x 1-1/8", 65 - 6 x 1-1/4", 45 - 6 x 1-5/8", 40 - 6 x 2", 35 - 6 x 2-1/4"
6
2.17#
Ea
300 Assorted #8 Phillips/Slotted Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #8 Slotted Hex Washer Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #8 Square-Drive Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2"
210 Assorted #10 Phillips/Slotted Pan 1 6 Head Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20 - 2" 210 Assorted #10 Slotted Hex 1 6 Washer Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20 - 2" 210 Assorted #10 Square-Drive Pan 1 6 Head Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20
Wall Plate Screw Kit ( 12 Compartment Box ) APS1 27640 450 Assorted Wall Plate Screws 1 1/2" Lengths - 100 Ea: White & Ivory, 25 Ea: Almond, Stainless, Brass, Nylon; 3/4" Lengths - 25 Ea: White, Ivory & Almond; 1" Lengths - 25 Ea: White, Ivory & Almond Wall Plate Screw Kit ( 6 Compartment Box ) APS2 27642 450 Assorted Wall Plate Screws Ivory, White, & Almond: 50 - 5/16", 50 - 1/2", 30 - 3/4", 20 - 1" Wood Rocket Kit WR6 15055
Concrete Anchoring System Kit PC 4760 CAT NO CK14
UPC
81517
DESCRIPTION
Hex 20 20 20 -
Head Slotted - Blue Finish 14H114 1/4" x 1-1/4" 14H134 1/4" x 1-3/4" 14H214 1/4" x 2-1/4"
See new products at lhdottie.com
- 2"
ANCHORS & KITS > FASTENER KITS
• Reusable Six Compartment Box
STD MSTR WT/STD UNIT 1
6
1.55#
Ea
B17
Self Drilling Screw Kits - Zinc Plated PC 4810
ANCHORS & KITS > SCREW & WASHER KITS
Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need.
CAT NO #8 TK800
UPC
17705
TK800DD 17706 TK800PH 17707 #10 TK100
17770
TK100DD 17701 TK100PH 17702 #8 and #10 TK810 17710 TK810DD 17711 TK810PH 17712
CAT NO
UPC
Flat Washer Kit FW2 15050 Fender Washer Kit FENWK 15539 Lock Washer Kit LWK 31005
B18
DESCRIPTION
• Installation Tool • Reusable Six Compartment Box
STD
MSTR WT/STD UNIT
240 Assorted Self Drilling 1 6 Hex Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4" 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - MT8 Magnetic Driver 240 Assorted Self Drilling 1 6 Square Drive Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - IB2 Insert Bit 240 Assorted Self Drilling 1 6 Phillips Head Screw: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - IB2P Insert Bit
1.50#
Ea
1.41#
Ea
1.84#
Ea
240 Assorted Self Drilling 1 6 1.85# Hex Head Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - MT10 Magnetic Driver 240 Assorted Self Drilling 1 6 1.85# Square Drive Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - IB2 Insert Bit 240 Assorted Self Drilling 1 6 1.84# Phillips Head Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - IB2P Insert Bit
Ea
295 Assorted Self Drilling 1 Hex Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 50 - 10 x 1/2", 50 - 10 x 3/4", 30 - 10 x 1", + 1 Each; MT8 & MT10 Magnetic Drivers 330 Assorted Self Drilling 1 Square Drive Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", + 1 - IB2 Insert Bit 330 Assorted Self Drilling 1 Phillips Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", + 1 - IB2P Insert Bit
Washer Kits PC 4760
DESCRIPTION
Flat Washer Kit (2 pounds) #8 120 pcs, #10 120 pcs, 1/4" 60 pcs, 5/16" 30 pcs, 3/8" 85 pcs, 1/2" 6 pcs
Ea Ea
6
1.92#
Ea
6
1.90#
Ea
6
1.86#
Ea
STD MSTR WT/STD UNIT 1
6
2.00#
Ea
120 Assorted Zinc Plated Fender Washers 3 Sizes: 3/16 x 1-1/4", 1/4 x 1-1/4", 3/8 x 1-1/4" 40 Each Size
1
6
2.54#
Ea
415 Assorted Zinc Plated Lock Washers 6 Sizes: #8, #10, 1/4", 5/16", 3/8", 1/2" 100 - #8, 100 - #10, 100- 1/4", 50 - 5/16", 40 - 3/8", 25 - 1/2"
1
6
1.38#
Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
B
Tapered with Wings PC 4370
CAT NO
UPC
121 122 123
4-6-8 8-10-12 12-14-16
Tapered with Collar PC 4370 • Tapered with Collar • Plastic • Packed in Invincibox™
20 21 22 23
UPC
Straight PC 4370
CAT NO
221 222 223
UPC
3/16" 1/4" 5/16"
3/16" 3/16" 1/4" 5/16”
• Plastic • Packed in Invincibox™
1711 1714
UPC
Triple Grip PC 4370
3/4" 7/8" 1" 1-1/2”
Red Red Red Red
SCREW SIZE DRILL SIZE LENGTH COLOR 6-8 10-12 12-14
• Nylon • Steel Pin
10070 10075
100 100 50
500 500 250
4000 3000 1500
0.11# 0.20# 0.15#
C C C
SIZE
3/16" 1/4"
STD SLEEVE MSTR WT/STD UNIT 100 100 100 50
500 500 500 250
4000 4000 3000 1500
0.08# 0.08# 0.15# 0.14#
C C C C
Plastic anchors: Straight. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
3/16" 1/4" 5/16"
Nylon Button Head with Pins PC 4370
CAT NO
White Yellow Green
STD SLEEVE MSTR WT/STD UNIT
Plastic anchors: Tapered w/Collar. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
4-6-8 6-8-10 8-10-12 12-14-16
16085 16090 16095
• Straight • Ribbed Body
1" 1-1/4" 1-1/2"
SCREW SIZE DRILL SIZE LENGTH COLOR
15080 15085 15090 15095
• Straight • Ribbed Body
Plastic anchors: Tapered with Wings. Drill a hole into drywall, concrete, brick or block and insert anchor. The screw is then installed through the fixture into the anchor. Used for light duty work.
SCREW SIZE DRILL SIZE LENGTH COLOR
31430 31432 31434
CAT NO
• Wings Secure Anchor From Spinning
ANCHORS & KITS > ANCHORS
• Tapered with Wings • Plastic • Packed in Invincibox™
1" 1" 1-1/2"
White Green Blue
STD SLEEVE MSTR WT/STD UNIT 100 100 50
500 500 250
4000 3000 1500
0.15# 0.22# 0.23#
C C C
Nylon button head anchors with pins. Fast and easy to install. Position the fixture, drill a hole into concrete, brick or block and insert anchor through the fixture into the hole. Hammer the nail to spread and secure anchor. Used for light duty work.
LENGTH 1" 1"
COLOR White White
STD 100 100
SLEEVE 500 500
MSTR 3000 3000
WT/STD 0.55# 0.57#
UNIT C C
• Claws Grip For Strength • Wings For Strength and Vibration Resistance • Core Expands For additional Holding Power
CAT NO UPC SCREW SIZE DRILL SIZE LENGTH COLOR STD SLEEVE MSTR WT/STD UNIT
6 8 10 12
81643 81644 81645 81646
#6 #8 #10 #12
1/4" 1/4" 5/16" 3/8"
1-1/4" 1-1/4" 1-1/2" 1-1/2"
Beige 100 Gray 100 Blue 50 Green 50
See new products at lhdottie.com
500 500 250 250
4000 4000 1500 1500
0.91# 0.97# 0.60# 1.23#
C C C C
B1
Wall Driller Anchors - Boxed PC 4465
ANCHORS & KITS > ANCHORS
Wall Driller: Used only in drywall, this anchor has better pullout and shear values than plastic anchors. Installed by inserting Phillips or square drive bit into the anchor and driving it into the drywall until flush. Use the same bit to insert the proper sheet metal screw to mount the fixture. The anchor is easy to spot and will not break out the backing of the drywall. No drill bit needed.
CAT NO
UPC
WD6 WD6N WD8 WD8N
29770 29771 29776 29777
USE SCREW
ANCHOR
#6 #6 #8 #8
Zinc Nylon Zinc Nylon
DRYWALL 3/8", 3/8", 3/8", 3/8",
• Not Recommended for Ceiling Applications
• Wall Driller • Anchors Only • Boxed • Zinc or Nylon
STD
1/2" 1/2" 1/2", 5/8" 1/2", 5/8"
100 100 100 100
MSTR 1000 1000 1000 1000
Screws & Bit not provided. Use 6 x 1 SMS with WD6, Use 8 x 1-1/4 SMS with WD8, Use #2 bit for both. See Page B14 for Wall Driller Kits.
CAT NO
ANCHOR SPECIFICATIONS
SCREW
WD6N WD6 WD8N WD8
MATERIAL
#6 #6 #8 #8
3/8” DRYWALL TENSILE SHEAR
Nylon Zinc Nylon Zinc
55 55 60 60
110 110 120 120
1/2” DRYWALL TENSILE SHEAR
60 60 68 68
WT/STD UNIT 0.83# 0.23# 1.72# 0.48#
C C C C
5/8” DRYWALL TENSILE SHEAR
120 120 132 132
N/A N/A 90 90
N/A N/A 200 200
All values are ultimate loads and should be used as a guide only. Actual results may very. It is recommended to apply a minimum safety factor of 4 to 1 to these loads. #6 sheet metal screws were used in tests with #6 Wall Driller. #8 sheet metal screws were used in tests with #8 Wall Driller.
Driller Toggle - Boxed PC 4461
STRENGTH
CAT NO
YOU CAN DEPEND ON!
UPC
WDT83BX 81489 WDT363BX 81490 WDT43BX 81491
CONTENTS
• Driller Toggle • Includes Screws • Reusable
• Metal/Engineered Plastic
STD MSTR WT/STD UNIT
1/8" Driller Toggle (1/8" x 3" Truss Hd. Mach. Screws) 50 3/16" Driller Toggle (3/16" x 3" Truss Hd. Mach. Screws) 50 1/4" Driller Toggle (1/4" x 3" Truss Hd. Mach. Screws) 50
Power Bit not provided. See page B15 for Driller Toggle Kit.
500 500 200
1.55# 2.25# 3.65#
C C C
FEATURES • No Pre-Drilling • Quick & Easy • Ideal for Ceiling Applications • Combo Truss Head Screws • Versatile for 3/8", 1/2" and 5/8" Drywall! DRYWALLL THICKNESS
3/8" 1/2" 5/8"
TEST RESULTS TENSION (LBS)
87 106 160
SHEAR (LBS)
231 253 285
NOTE: The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4 or greater to determine the allowable working load.
B2
To Order: Phone (323)725-1000 / Fax (323)721-0000
Zamac Anchors - Hammer Screws PC 4495
CAT NO
ZAS75 ZAS100 ZAS125 ZAS150 ZAS200
UPC
59360 59361 59362 59363 59364
Zamac Anchors PC 4490
ANCHOR SIZE 1/4 1/4 1/4 1/4 1/4
x x x x x
3/4" 1" 1-1/4" 1-1/2" 2"
• Zamac Alloy with Carbon Steel Pin • Use for Concrete, Block, Brick, Stone • Not recommended for Ceiling Applications
CAT NO ZA78 ZA75 ZA100 ZA125 ZA150 ZA200
Drive Pins PC 4480
UPC
59350 59348 59352 59354 59356 59358
• Drive Pins • 1/4" Head • Steel
CAT NO HD220 HD230 HD240 HD255 HD260
Stud Driver PC 4482
HD
3/16 x 7/8" 1/4 x 3/4" 1/4 x 1" 1/4 x 1-1/4" 1/4 x 1-1/2" 1/4 x 2"
DRILL SIZE 1/4" 1/4" 1/4" 1/4" 1/4"
STD
MSTR
100 100 100 100 100
500 500 500 500 500
WT/STD 1.50# 1.75# 2.25# 2.50# 3.00#
UNIT C C C C C
Zamac anchors have better shear resistance than plastic pin anchors. Fast and easy to install. Position the fixture, drill a hole through the fixture or through an existing hole in fixture into concrete, brick or block and insert anchor through the fixture into the hole until flush. Hammer the nail to spread and secure anchor. Used for light duty work.
DRILL SIZE 3/16" 1/4" 1/4" 1/4" 1/4" 1/4"
STD
MSTR
100 100 100 100 100 100
500 500 500 500 500 500
WT/STD UNIT 0.75# 1.50# 1.75# 2.25# 2.50# 3.00#
C C C C C C
Drive pins are installed with a stud driver. The pin is inserted into the driver which is placed onto the item to be fastened. Using a sledge or drilling hammer, drive the pin home. Will drive through metal into concrete.
UPC
29005 29010 29015 29020 29025
• Use With 1/4" Pins • Cushioned Grip
CAT NO
ANCHOR SIZE
The Zamac Hammer Screw® is a unique, one-step drive anchor featuring a Phillips head and a screw thread. Designed to provide a removable anchor with 40% higher tension load capacities when installed in concrete.
ANCHORS & KITS > ANCHORS
• Zamac Alloy with Carbon Steel Screw Drive • Use for Concrete, Block, Brick, Stone • Not Recommended for Ceiling Applications
UPC
15755
* Hammer not included
LENGTH 3/4" 1" 1-1/4" 1-1/2" 2"
STD 100 100 100 100 100
MSTR 4000 4000 3000 3000 3000
WT/STD 0.51# 0.66# 0.77# 0.88# 0.99#
UNIT C C C C C
Drive pins are installed with a stud driver. The pin is inserted into the driver which is placed onto the item to be fastened. Using a sledge or drilling hammer, drive the pin home. Will drive through concrete.
STD 1
MSTR 6
See new products at lhdottie.com
WT/STD 0.66#
UNIT Ea
B3
Machine Screw Anchors PC 4520
ANCHORS & KITS > ANCHORS
Machine screw (lead) anchors: Performs well in a variety of concrete strengths, can be used in brick. Any head style screw can be used. The screw can be easily removed or loosened and retightened. Vibration does not affect the lead insertʼs hold on the concrete. Adapts well to hole size variations. Drill hole in concrete and drop anchor expander side down into hole. Place setting tool over anchor and hammer until set.
CAT NO MA2 MA3 MA5 MA6 MA7 MA8
UPC
29910 29915 29925 29930 29935 29940
ANCHOR SIZE
DRILL SIZE
8-32 10-24 1/4-20 5/16" 3/8" 1/2"
5/16" 3/8" 1/2" 5/8" 3/4" 7/8"
INSTALL TOOL ST2 ST3 ST5 ST6 ST7 ST8
STD
MSTR
100 100 100 50 50 50
1000 1000 600 300 300 300
WT/STD UNIT 1.00# 1.75# 4.50# 3.90# 7.00# 9.50#
ST Tool must be used for proper installation (sold separately).
C C C C C C
“ST” Tools for MA Anchors PC 4530
“ST” tool must be used for proper installation. Sold separately from MA anchors
CAT NO ST2 ST3 ST5 ST6 ST7 ST8
UPC
17600 17605 17610 17615 17620 17625
SIZE
8-32 10-24 1/4-20 5/16" 3/8" 1/2"
USE FOR
STD
MA2 MA3 MA5 MA6 MA7 MA8
1 1 1 1 1 1
CAT NO NT14L NT38L
UPC
66790 66795
SCREW/SIZE 8 x 1-1/2" 10 x 1-1/2"
MSTR 10 10 10 10 10 10
Toggle Anchors - Nylon PC 4320
Nylon Toggle Anchors: After proper size hole is drilled, fold and insert anchor into hole. In solid concrete it will act as a conventional anchor, in hollow wall installations the anchor opens like a toggle bolt.
DRILL SIZE 1/4" 3/8"
WALL THICKNESS 1/2" Drywall 5/8" Drywall
See B15 For Kits ( NTK14L & NTK38L )
ST36 ST25
UPC
10536 10525
SCREW/SIZE 3/16 x 4" 1/4 x 4"
DRILL SIZE 1/2" 1/2"
WALL THICKNESS 2-1/2" 2-1/2"
See B15 For Kits
UNIT
0.07# 0.09# 0.17# 0.27# 0.42# 0.53#
Ea Ea Ea Ea Ea Ea
• Caution! Always Wear Eye Protection
STD MSTR WT/STD UNIT 100 100
The Strap-Toggle is a heavy duty hollow wall anchor designed for use in base materials such as plaster, wallboard, or hollow tile. The Strap Toggle is a pre-assembled anchor consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. It is available in both 3/16" and 1/4" size. When compared to traditional toggles, this unique anchor can be installed in a smaller hole and does not require a fixture or screw to set it. The anchor can be easily adjusted to accommodate a wall thickness of up to 2-1/2". The toggle remains captive.
CAT NO
WT/STD
• Toggle Anchors • Nylon • Screws Not Provided
Strap Toggle PC 4375
B4
• Medium Duty • Tool Not Included • Caution! Always Wear Eye Protection
1000 1000
0.26# 0.51#
• Strap Toggle • Nylon • Screws Not Provided • Reusable
C C
• Caution! Always Wear Eye Protection
STD MSTR WT/STD UNIT 50 50
250 250
1.64# 1.66#
C C
To Order: Phone (323)725-1000 / Fax (323)721-0000
Wall Grip / Wall Drive Anchors PC 4435
CAT NO
Wall Grip WG18S WG18L WG316S WG316L WG14S WG14L
UPC
31400 31402 31404 31406 31408 31410
• Steel • Caution! Always Wear Eye Protection
SIZE
GRIP RANGE
1/8" 1/8"
1/8"-1/2" 1/8"-13/16"
1/8" 1/8" 3/16" 3/16" 1/4" 1/4"
Wall Drive Anchors 18SD 31412 18SLD 31414
Lag Shields PC 4450
• Lag Shields • Short & Long Styles • Zamac Metal
CAT NO
HLS (Short) HLS14 HLS516 HLS38 HLS12
UPC
for Hard Masonry 31200 1/4" 31205 5/16" 31210 3/8" 31215 1/2"
SLS (Long) for Soft Masonry SLS14 31230 1/4" SLS516 31235 5/16" SLS38 31240 3/8" SLS12 31245 1/2"
Pipe Spike PC 4380
• One Piece Design • Vibration Resistant • Approved for Overhead
CAT NO
PS25 PS38
UPC
81492 81493
DIA
1/2" 1/2” 5/8" 3/4" 1/2" 1/2" 5/8" 3/4"
CAT NO
CWC
UPC
81936
5/16" 5/16" 3/8" 3/8" 1/2" 1/2"
STD
MSTR
100 100
1000 1000
100 100 50 50 50 50
1000 1000 500 500 500 500
WT/STD UNIT 1.20# 1.70# 1.70# 2.04# 2.45# 2.94#
1.40# 1.75#
C C C C C C
C C
Lag shields: Allows for using lag screws in materials such as mortar joints, poured concrete, brick and concrete blocks.
MIN DEPTH 1" 1-1/4" 1-3/4" 2"
1-1/2" 1-13/16" 2-1/2" 3"
TENSILE
STD
MSTR
1600# 1700# 1800# 2750#
50 50 50 25
500 500 500 250
1450# 1500# 1600# 2000#
100 100 50 25
1000 1000 500 250
WT/STD UNIT 1.98# 2.68# 2.30# 2.07#
C C C C
3.90# 5.40# 2.30# 2.07#
C C C C
The Pipe Spike is designed primarily for use when hanging threaded rod. Using a special manufacturing process the anchor is formed with a "S" shaped configuration at the working end of the anchor to create an expansion mechanism. As the anchor is driven into the hole, the expansion mechanism is compressed and flexes to the size of the hole.
SIZE 1/4" 3/8"
CONTENTS
Pipe Spike for 1/4" Rod Hanging Pipe Spike for 3/8" Rod Hanging
Pre-Tied Ceiling Wire With Clip PC 4385 • 12 Gauge Wire • Includes 1-1/4” Pin & Clip
DRILL
1/8"-1/2" 5/8"-7/8" 1/8"-5/8" 5/8"-1-3/16" 1/8"-5/8" 5/8"-1-3/16"
• Caution! Always Wear Eye Protection
SIZE
Wall Grip Anchors: Also known as “Mollies” or Molly Bolts. Made for hollow wall installations. When tightened, the body pulls up to enable the anchor to secure itself to very thin walls such as paneling.
ANCHORS & KITS > ANCHORS
• Wall Grip / Wall Drive • Drive Style Anchor Does Not Require a Predrilled Hole
• Galvanized Finish • ICC# ESR1530
DESCRIPTION
STD 100 50
MSTR WT/STD UNIT 600 300
4.00# 4.00#
C C
Pre-Tied Ceiling Wires are installed with low velocity powder actuated tools in poured concrete deck.
6' Pre-Tied ceiling wire with 1-1/4" Pin & Clip
See new products at lhdottie.com
STD 100
MSTR WT/STD UNIT 100
22.00#
C
B5
Drop In Anchors PC 4500, 4310
ANCHORS & KITS > DROP IN ANCHORS > SLEEVE ANCHORS
Drop In Anchors: This steel anchor performs well in a variety of concrete strengths. Can be used in brick. Any head style screw can be used. The screw can easily be removed or loosened and retightened. Drill hole in concrete and drop anchor into hole. Place setting tool over anchor and hammer until set.
CAT NO
UPC
ANCHOR SIZE DRILL SIZE REQUIRED TOOL
Steel Zinc Plated - PC 4500 DA25 27600 1/4-20 DA38 27605 3/8-16 DA50 27610 1/2-13 DA58 27615 5/8-11 DA75 27620 3/4-10
3/8" 1/2" 5/8" 7/8" 1"
Stainless Steel - PC 4310 DAS25 70260 1/4-20 DAS38 70262 3/8-16 DAS50 70264 1/2-13 DAS58 70266 5/8-11 DAS75 70268 3/4-10
AT25 AT38 AT50 AT58 AT75
3/8" 1/2" 5/8" 7/8" 1"
AT25 AT38 AT50 AT58 AT75
( “AT” Tool - SOLD SEPARATELY - Must Be Used For Proper Installation )
STD 100 50 50 25 10
100 50 50 25 10
MSTR WT/STD
1000 500 250 125 50
2.00# 3.00# 6.00# 6.00# 4.80#
1000 500 250 125 50
2.00# 3.00# 6.00# 6.00# 4.80#
UNIT C C C C C
C C C C C
“AT” Tool For DA Anchors PC 4510
“AT” tool must be used for proper installation. Sold separately from DA/DAS anchors
CAT NO AT25 AT38 AT50 AT58 AT75
UPC
27630 27635 27570 27575 27580
SIZE 1/4" 3/8" 1/2" 5/8" 3/4"
ANCHOR TYPE
STD
DA25/DAS25 DA38/DAS38 DA50/DAS50 DA58/DAS58 DA75/DAS75
1 1 1 1 1
MSTR
Sleeve Anchors - Zinc Plated PC 4550
10 10 10 10 10
Sleeve Anchors: Similar to the wedge anchor. It can be used in the same materials as the wedge anchor, but can also be used in soft concretes because the compression load can be distributed over a longer length. Can be installed through the fixture. Assemble nut and washer on stud and insert into predrilled hole. Anchor is hammered into hole until the nut is seated. CAT NO
UPC
Hex Nut SA516112 SA516212
59334 59336
Acorn Nut SA14138 SA14214
SA38178 SA38300 SA12214 SA12300 SA12400
B6
• Caution! Always Wear Eye Protection
• Drop In • Zinc Plated Steel • Stainless Steel
SIZE
BOLT LENGTH
59330 59332
1/4 x 1-3/8" 1/4 x 2-1/4"
1-21/32" 2-9/16"
59338 59340
3/8 x 1-7/8" 3/8 x 3"
2-3/16" 3-5/16"
59342 59344 59346
5/16 x 1-1/2" 5/16 x 2-1/2" 1/2 x 2-1/4" 1/2 x 3" 1/2 x 4"
1-13/16" 2-11/16" 2-7/8" 3-3/8" 4-3/8"
DRILL DIA 1/4" 1/4"
5/16" 5/16" 3/8" 3/8" 1/2" 1/2" 1/2"
MIN. EMBED
STD
MSTR
100 100
600 500
100 100
1-5/8" 1-5/8"
50 50
2-1/8" 2-1/4" 2-1/4"
25 25 25
UNIT
0.14# 0.25# 0.41# 0.55# 0.77#
• Sleeve • Hex or Acorn Nut • Zinc Plated
1-1/8" 1-1/8" 1-3/8" 1-1/2"
WT/STD
600 600
300 250 150 150 150
Ea Ea Ea Ea Ea
• Available In Larger Diameters & Lengths
WT/STD
2.75# 3.25# 4.25# 5.75#
3.50# 5.00# 3.50# 4.30# 5.50#
UNIT C C C C
C C C C C
To Order: Phone (323)725-1000 / Fax (323)721-0000
Wedge Anchors Full Thread Zinc Plated - PC 4540
CAT NO
• Available In Larger Diameters & Lengths
UPC
W14134 W14214 W14314
59300 59302 59304
W12234 W12334 W12400 W12512
59312 59313 59314 59316
W38214 W38234 W38300 W38334 W38500
59306 59307 59308 59310 59311
• Caution! Always Wear Eye Protection
Wedge anchors can be installed through the fixture. Assemble nut and washer until the nut is flush with the top of the anchor, insert into predrilled hole. Hammer anchor into hole until the washer is flush with surface of the fixture. Expand the anchor
ANCHOR OVERALL THREAD HOLE DIA LENGTH LENGTH 1/4-20 1/4-20 1/4-20
1-3/4" 2-1/4" 3-1/4"
3/4" 1-1/4" 2-1/4"
1/2-13 1/2-13 1/2-13 1/2-13
2-3/4" 3-3/4" 4-1/2" 5-1/2"
1-3/8" 2-3/8" 3-1/8" 4-1/8"
3/8-16 3/8-16 3/8-16 3/8-16 3/8-16
2-1/4" 2-3/4" 3" 3-3/4" 5"
1-1/4" 1-5/8" 1-7/8" 2-5/8" 3-7/8"
STD
MSTR
50 50 50 50 50
300 300 300 300 300
100 100 100
600 600 600
50 50 50 50
200 200 200 150
WT/STD UNIT 3.00# 3.50# 4.75#
C C C
9.00# 11.50# 14.00# 16.00#
C C C C
4.37# 4.75# 5.37# 6.37# 7.75#
C C C C C
The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting a length.
Wedge Anchors Full Thread Stainless Steel PC 4310 • Wedge • Full Thread • Stainless Steel
CAT NO
UPC
WS38214 WS38234 WS38300 WS38334 WS38500
70320 70322 70324 70326 70328
WS14134 WS14214 WS14314
70310 70312 70314
WS12234 WS12334 WS12400 WS12512
70340 70342 70344 70346
ANCHORS & KITS > WEDGE ANCHORS
• Wedge • Full Thread • Zinc Plated
Stainless Steel Wedge Anchors resist corrosion and are ideal • Available In Larger Diameters for applications where chemical resistance is required. Stainless can be mildly magnetic. ICC Approval (Pending). & Lengths
ANCHOR OVERALL THREAD HOLE DIA LENGTH LENGTH 1/4-20 1/4-20 1/4-20
3/8-16 3/8-16 3/8-16 3/8-16 3/8-16 1/2-13 1/2-13 1/2-13 1/2-13
1-3/4" 2-1/4" 3-1/4"
2-1/4" 2-3/4" 3" 3-3/4" 5" 2-3/4" 3-3/4" 4-1/2" 5-1/2"
3/4" 1-1/4" 2-1/4"
1-1/4" 1-5/8" 1-7/8" 2-5/8" 3-7/8" 1-3/8" 2-3/8" 3-1/8" 4-1/8"
STD
MSTR
50 50 50 50 50
300 300 300 300 300
100 100 100
600 600 600
50 50 50 50
200 200 200 150
WT/STD UNIT 3.00# 3.50# 4.75#
C C C
4.37# 4.75# 5.37# 6.37# 7.75#
C C C C C
9.00# 11.50# 14.00# 16.00#
C C C C
The published length is the overall length of the anchor. Allow for fixture thickness plus one anchor diameter for the nut and washer thickness when selecting a length.
A
1. Use a carbide bit (ANSI) B94 12) the same size as the bolt dia. Drill hole deeper than bolt embed. (min. 4.5 dia.) Do not use core bits. Maintain accurate hole size. 2. Clean hole debris 1 2 3. Add washer + thread nut flush with top of bolt. Drive bolt into hole thorough item to be fastened. 4. To set, tighten nut 3-4 full turns or consult chart for guide installation torque. NOTE: Using in concrete cured less than 28 days will greatly reduce anchor strength. WARNING: WEAR SAFETY GOGGLES
See new products at lhdottie.com
Terminology Anchor Diameter (A)
Thread Length (B)
3 turns of nut (approx. 1/2 bolt dia.) + B B Nut & washer thickness (approx. 1 bolt dia.) + C C Fixture thickness + D Minimum embedment (min. 4112 bolt dia.) = D Minimum Anchor Length If minimum anchor length falls between 2 sizes, use longer size. The maximum recommended anchor embedment should be 80% of the base material thickness. If a concrete slab is 10” thick, an 8” depth would be the maximum recommended anchor embedment. A
Installation
T A L K Anchor Length (C) Embedment (D)
Selection
T E C H
Pull Out Shear
B7
ANCHORS & KITS > ROD HANGING SYSTEM > STEEL
CAT NO
#3 For Purlins SSM14B B SSM38BR B N #5 For Beams SSM12BR B N
Mount Direction:
B
CAT NO
#3 For Purlins SSM14S S SSM38SR S N Mount Direction:
S
17591 17592
ROD SIZE
SCREW SHANK SIZE/LENGTH
POINT STYLE
SELF DRILLING RANGE
STD MSTR WT/STD UNIT
1/2"
12-24 x 1-1/2"
#5
0.188" – 0.500"
100
1/4" 3/8"
17597
1/4"-20 x 1" 1/4"-20 x 1-1/2"
= Bottom Mount
UPC
17593 17594
B
= Bottom Mount With Nut
SCREW SHANK SIZE/LENGTH
1/4" 3/8"
1/4"-20 x 1" 1/4"-20 x 1-1/2"
S
N
POINT STYLE
= Side Mount With Nut
SCREW SHANK
B S B
N
S
N
B
N
Mount Direction:
0.036" – 0.188" 0.036" – 0.188"
100 100
600 500
B
1/4"-20 x 1" 1/4"-20 x 1" 1/4"-20 x 1-1/2" 1/4"-20 x 1-1/2" 12-24 x 1-1/2"
= Bottom Mount
7.50# 8.01#
500
8.01#
C C
C
Steel Side Mount Rod Hangers PC 4600
ROD SIZE
= Side Mount
N
#3 #3
SELF DRILLING RANGE
#3 #3
0.036" – 0.188" 0.188" – 0.520"
STD MSTR WT/STD UNIT 100 100
600 500
ULTIMATE LOAD CAPACITIES INSTALLED IN MINIMUM ASTM A 36 STEEL (PURLINS AND BEAMS)
ROD DIA
1/4" 1/4" 3/8" 3/8" 1/2"
UPC
Steel Bottom Mount Rod Hangers PC 4600
B
N
20
1,550 1,550 1,550 1,550 -
STEEL GAUGE (THICKNESS) 18 16 14 12
1,550 1,550 1,550 1,550 -
= Bottom Mount With Nut
S
1,775 1,775 1,775 1,775 920
= Side Mount
1,775 1,775 1,775 1,775 1,560
S
N
2,050 2,050 2,050 2,050 2,050
7.30# 7.00#
3/16"
3,850 3,850 3,850 3,850 3,280
= Side Mount With Nut
C C
1/4"
5,040 2,050 5,040 2,050 5,040
Dottie Steel Rod Hangers loaded perpendicular to the threaded rod (shear) the ultimate load capacity for the anchor is 1,965 lbs in nominal 20 guage steel (0.036”). Steel Dottie Rod Hangers are recommended to be installed with the Universal Steel & Wood Nut Driver UNIB.
Steel Rod Hanger
B8
Wood Rod Hanger
Concrete Rod Hanger
To Order: Phone (323)725-1000 / Fax (323)721-0000
Wood Bottom Mount Rod Hangers PC 4600 SSW14B B SSW38B B SSW38BUL SSW12B B
UPC
B
Mount Direction:
* B
17586 17587 17582 17581
ROD SIZE
SCREW SHANK SIZE/LENGTH
1/4" 3/8" 3/8" 1/2"
1/4" 1/4" 3/8" 3/8"
= Bottom Mount
x x x x
2" 2" 2-1/2" 2-1/2"
Wood Side Mount Rod Hangers PC 4600 CAT NO
SSW14S S SSW38S S SSW38SUL
UPC
S
Mount Direction:
* S
17588 17589 17590
ROD SIZE
= Side Mount
SCREW SHANK SIZE/LENGTH
1/4" 3/8" 3/8"
1/4" x 2" 1/4" x 2" 3/8" x 2-1/2"
SCREW SHANK SIZE/LENGTH
B S B S B S
Mount Direction:
Type Type Type Type
17 17 17 17
POINT STYLE
Type 17 Type 17 Type 17
1/8" 1/8" 1/8" 1/8"
PRE-DRILL (IF REQUIRED) 1/8" 1/8" 1/8"
B
B
= Bottom Mount
S
1/4" 1/4" 1/4" 1/4" 3/8" 3/8" 3/8"
x x x x x x x
2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2"
= Side Mount
EMBED DEPTH
What is the Dottie Rod Hanging System For? Pipe hanging Conduit Eye rod Cable trays Lighting systems Strut channels Overhead utilities Sprinkler systems Drop ceilings HVAC duct Electrical Refrigeration
FIR (LBS)
2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2"
T E C H
• • • • • • • • • • • •
PRE-DRILL (IF REQUIRED)
STD MSTR WT/STD UNIT 100 100 100 100
500 500 300 300
685 1,510 1,510 1,800 2,670 1,450 2,670
C C C C
* = U/L listed
100 100 100
500 500 300
PINE (LBS)
650 1,510 1,510 1,800 3,110 1,530 3,110
7.40# 7.40# 8.60#
C C C
* = U/L listed
SPRUCE (LBS)
650 1,510 1,510 1,800 3,110 1,380 3,110
T A L K
Who Uses the Dottie Rod Hanging System?
• Plumbers • Maintenance Contractors • Electricians • Sprinkler Contractors • Mechanical Contractors • HVAC Contractors
See new products at lhdottie.com
8.04# 7.10# 9.00# 9.00#
STD MSTR WT/STD UNIT
ULTIMATE LOAD CAPACITIES INSTALLED IN WOOD BASE MATERIALS (STRUCTURAL WOOD & TIMBER)
ROD DIA
1/4" 1/4" 3/8" 3/8" 3/8" 3/8" 1/2"
POINT STYLE
ANCHORS & KITS > ROD HANGING SYSTEM > WOOD
CAT NO
Why the Dottie Rod Hanging System?
Competitive advantages: • Lower “IN-PLACE” cost • Simple to install • FAST • 1 Socket for Wood & Steel • 1 System for all rod hanging • L.H. Dottie Support • 15 Year performance warranty
B9
Concrete Bottom Mount Rod Hangers PC 4600
ANCHORS & KITS > ROD HANGING SYSTEM > CONCRETE
CAT NO
SSC14B
SSC38B
SSC12B
UPC
81215
B
18550
B
B
Mount Direction:
ROD DIA
1/4" 3/8" 1/2"
81216 B
ROD SCREW SHANK SIZE SIZE/LENGTH 1/4"
1/4" x 1-1/4"
1/2"
3/8" x 2-3/4"
3/8"
= Bottom Mount
1/4" x 1-1/2"
SCREW SHANK SIZE/LENGTH
1/4" x 1-1/4" 1/4" x 1-1/2" 3/8" x 2-3/4"
B B B
THREAD STYLE
ANSI Wedge-Bolt Thread ANSI Wedge-Bolt Thread ANSI Wedge-Bolt Thread
PRE-DRILL DIAMETER 1/4" ANSI
1/4" ANSI
3/8" ANSI
STD MSTR WT/STD UNIT 100
600
2.92#
C
50
250
8.00#
C
100
600
ULTIMATE LOAD CAPACITIES INSTALLED IN NORMAL WEIGHT CONCRETE
ANSI DRILL BIT DIA
1/4" 1/4" 3/8"
EMBED DEPTH
1-1/4" 1-1/2" 2-3/4"
MAX 2000 PSI CLAMPING TENSION SHEAR TORQUE (LBS) (LBS) FT.-LBS.
8 8 35
1,390 1,810 1,760 2,580 5,320 5,250
4000 PSI TENSION SHEAR (LBS) (LBS)
1,950 2,440 2,595 2,640 6,050 6,330
ROD DIA
1/4" 3/8" 1/2"
SCREW SHANK SIZE/LENGTH B B B
1/4" x 1-1/4" 1/4" x 1-1/2" 3/8" x 2-3/4"
ANSI DRILL BIT DIA
1/4" 1/4" 3/8"
EMBED DEPTH
1-1/4" 1-1/2" 2-3/4"
MAX CLAMPING TORQUE FT.-LBS.
8 8 35
CENTER OF WEB (LBS)
2,775 3,700 8,240
C
6000 PSI TENSION SHEAR (LBS) (LBS)
Mount Direction: B = Bottom Mount Dottie's Concrete Rod Hangers must be installed with an ANSI approved SDS Drill Bit and appropriate Concrete Nut Driver. * ANSI approved SDS Drill Bits see page E4
ULTIMATE TENSION LOAD CAPACITIES INSTALLED IN NORMAL HOLLOW CORE PLANK
4.70#
Mount Direction: B = Bottom Mount Dottie's Concrete Rod Hangers are recommended to be installed with the appropriate ANSI Drill Bit and Concrete Nut Driver.
2,070 2,570 2,770 2,700 8,620 7,410
CENTER OF OF CORE (LBS)
1,920 2,570 3,480
Tabulated load values are for anchors installed in 8-inch thick hollow core plank with a minimum compressive strength of 4,000 psi at the time of installation. The 4' x 6' normal-weight concrete member features include 1-1/2" cover above and below cores and a minimum web thickness of 1-1/2". Data is in accordance with latest acceptance criteria and ASTM Standards. Depending on fastener application and governing building code, ultimate load capacities should be reduced by a minimum safety factor to determine the allowable working load. NFPA 13 Fire Protection requirements are 5 times the weight of the liquid (water) filled pipe plus 250 lbs. Consult the engineer of record.
Factory Mutual Approval - File No. J.I. 3015153
Underwriters Laboratories File No. EX1289 ICC Approval (Pending)
SSD Display Available Upon Request
B10
To Order: Phone (323)725-1000 / Fax (323)721-0000
Rod Hanging System Accessories PC 4605 UPC
SCP14**
81217
SCP50**
81248
Nut Drivers 17595 UNIB* SCP38** SS3009
Pole Tool PT612
81218 11209
81220
SOCKET DESCRIPTION
* Steel & Wood Universal Side & Bottom Installation Tool 1/4" Concrete Installation Tool 3/8" Concrete Installation Tool 1/2" Concrete Installation Tool Installation Tool Kit for Concrete Anchors
Steel Dottie Rod Hanger Beam Clamp
Save $2.80 WOOD BASE MATERIAL
Save
Wood Dottie Rod Hanger Hanger Bolt Rod/Coupler
Save $4.35 CONCRETE BASE MATERIAL
SPEED OF INSTALLATION
Red
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
5
0.25#
Ea
Blue
1
1
10 1
0.25# 2.92#
7.30#
Ea
Ea
Ea
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
SPEED OF INSTALLED INSTALLATION COST INSTALLATION
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
Fast Slow 53%
Fast Medium
Save 67%
INSTALLED COST
1
5
INSTALLATION
Low High
Low High
Very Easy Average Easy Medium
SPEED OF INSTALLED INSTALLATION COST INSTALLATION
Concrete Dottie Rod Hanger Medium Steel Dropin Slow
Save $4.22
500 – 1500 RPM drill speed
USAGE COLOR STD MSTR WT/STD UNIT
6' - 12' Pole Tool (includes three Jaw Chuck)
Save in Installation Costs STEEL BASE MATERIAL
SUGGESTED GUIDELINES
*UNIB
Save 44%
Low High
Easy Hard
$0.77 $0.77
$0.77 $0.77
1 4
1 5
$0.77 $3.08
$0.77 $3.85
$1.73 $2.22
$1.42 $.073
$2.50 $5.30
$2.19 $6.54
TYPICAL COST INSTALLED (3/8” SIZE) LABOR/MIN TIME LABOR MATERIAL TOTAL
$0.77 $0.77
5 11
$3.85 $8.47
$1.42 $1.02
$5.27 $9.49
*Labor rates based on ENR 20-City average of hourly pay scales for Electricians, Plumbers and Steamfitters, report dated June 2002.
T E C H
Installation Procedure
T A L K
ANCHORS & KITS > ROD HANGING SYSTEM > ACCESSORIES
CAT NO
**SCP Series
Always wear eye protection. Hanging System fastener into fastener with a smooth steady the socket driver, and install motion until the coupling is If pre-drilling is required, select perpendicular to the base firmly seated against the the recommended drill bit type material surface. Drive the and diameter. Drill to the surface of the base material. appropriate embedment Thread the appropriate STEEL CONCRETE WOOD depth, adding at least one diameter steel threaded diameter (1/4” to 1/2”) to rod or threaded bolt into the drilling depth to the coupling. The threadprevent the tip of the ed rod or bolt should fully fastener from running into a engage the thread length dead end at the rear of the of the coupling on a anchor hole. Select the vertical mount fastener. appropriate socket driver for the anchor size and type Please visit the Dottie to be installed and mount website at lhdottie.com into chuck of installation for approvals. tool. Insert the Dottie Rod
See new products at lhdottie.com
B11
Concrete Anchoring System Hi-Low Thread - PC 4560
ANCHORS & KITS > CONCRETE ANCHORS
Faster to install than most steel anchors, yet has significant load capacities. One tool drills the hole and sets the anchor without the need to remove from the drill chuck. Has the added advantage of close to edge fastening without potential breakout. Works in poured concrete, prestressed concrete, cinder block, brick, and mortar, and can be loosened for adjustment or removed. ICC Approval (Pending).
CAT NO
36H114 36H134 36H214 36H234 36H314
14H114 14H134 14H214 14H234 14H314 14H334 14H400 36P114 36P134 36P214 36P234 36P314 14P114 14P134 14P214 14P234 14P314 14P334 14P400
ANCHOR HEX/PHILLIPS DRILL SIZE BIT SIZE SIZE
UPC
11208 11288 11368 11448 11528
25208 25288 25368 25448 25528 25608 25648 11201 11281 11361 11441 11521
25201 25281 25361 25441 25521 25601 25641
Hex Head Slotted 3/16"
Hex Head Slotted 1/4"
Flat Head Phillips 3/16"
Flat Head Phillips 1/4"
3/16 3/16 3/16 3/16 3/16
x x x x x
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4"
1/4" 1/4" 1/4" 1/4" 1/4"
5/32 5/32 5/32 5/32 5/32
x x x x x
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2"
3/16 3/16 3/16 3/16 3/16
x x x x x
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4"
#2 #2 #2 #2 #2
5/32 5/32 5/32 5/32 5/32
x x x x x
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2"
1/4 1/4 1/4 1/4 1/4 1/4 1/4
x x x x x x x
1/4 1/4 1/4 1/4 1/4 1/4 1/4
x x x x x x x
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" 3-3/4" 4"
1-1/4" 1-3/4" 2-1/4" 2-3/4" 3-1/4" 3-3/4" 4"
5/16" 5/16" 5/16" 5/16" 5/16" 5/16" 5/16"
#2 #2 #2 #2 #2 #2 #2
• Ceramic Coated Blue Finish • Includes Drill • Caution! Always Wear Eye Protection
• Concrete Anchor System • Hex Head Slotted or Flat Head Phillips • Hi-Low Thread
3/16 3/16 3/16 3/16 3/16 3/16 3/16
3/16 3/16 3/16 3/16 3/16 3/16 3/16
x x x x x x x
x x x x x x x
STD
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 5-1/2" 5-1/2"
3-1/2" 3-1/2" 4-1/2" 4-1/2" 5-1/2" 5-1/2" 5-1/2"
100 100 100 100 100
MSTR WT/STD UNIT
100 100 100 100 100 100 100
500 500 500 500 500
0.89# 1.07# 1.30# 1.51# 1.87#
C C C C C
500 500 500 500 500
0.84# 1.04# 1.28# 1.45# 1.77#
C C C C C
500 500 500 500 500 500 500
100 100 100 100 100
100 100 100 100 100 100 100
500 500 500 500 500 500 500
1.44# 1.83# 2.26# 2.96# 3.02# 3.41# 3.62#
1.39# 1.85# 2.05# 2.53# 2.96# 3.38# 3.61#
C C C C C C C
C C C C C C C
Installation Tool - Phillips & Hex Head PC 4590
Installation tool installs all lengths of both phillips & hex head concrete screws. Consists of one each: Masonry drill bit holder; Phillips socket driver with one #2 & one #3 Phillips bit; 1/4" Hex socket driver; 5/16" Hex socket driver & Allen wrench.
CAT NO IT1000
UPC
DESCRIPTION
14495
Installation Tool
STD 1
MSTR
• Phillips or Hex Head • Accommodates All Lengths • Storage Box
WT/STD
1
1.50#
UNIT Ea
Hammer Drill Carbide Tipped Masonry Drill Bits PC 4570
Hammer Drills (CD Series) made specifically for Concrete Screw Anchoring System and are manufactured with closer tolerances.
CAT NO
CD5323 CD5324 CD5325
CD3163 CD3164 CD3165
UPC
14500 14502 14504
14506 14508 14510
ANCHOR SIZE
5/32"
3/16"
SDS Rotohammer Bits See Page E4
B12
3/16" 3/16" 3/16"
1/4" 1/4" 1/4"
• Carbide Tipped • Close Tolerances
DRILL SIZE
STD
3/16 x 3-1/2" 3/16 x 4-1/2" 3/16 x 5-1/2"
10 10 10
5/32 x 3-1/2" 5/32 x 4-1/2" 5/32 x 5-1/2"
10 10 10
• Caution! Always Wear Eye Protection
MSTR WT/STD 10 10 10
10 10 10
0.22# 0.22# 0.24#
0.25# 0.27# 0.29#
UNIT Ea Ea Ea
Ea Ea Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
Anchor Kits PC 4610
CAT NO
UPC
D-DISPLAY PACK T-TUFF PACK
6 x 1 Sheet Metal Screws RD2 30460 D RD2TP 30465 T 30463 D RD2HX RD2HXTP 30461 T 1AK 29630 D 1AKTP 29632 T
8 x 1 Sheet Metal Screws 30467 D RD3 RD3TP 30469 T RD3HX 30471 D RD3HXTP 30473 T RD3DD 30475 D RD3DDTP 30477 T 10 x 1 Sheet Metal K6CO 29625 K6COTP 29627 K6HX 29621 K6HXTP 29622 K7DC 16945 K7DCTP 16947 2AK 59200 2AKTP 59202 2AKHX 59203 2AKHXTP 59204 2AKDD 59207 2AKDDTP 59206 K6D 29600 K6DTP 29602
Screws D T D T D T D T D T D T D T
SCREW TYPE
Phillips/Slotted Phillips/Slotted Hex/Slotted Hex/Slotted Phillips/Slotted Phillips/Slotted
Phillips/Slotted Phillips/Slotted Hex/Slotted Hex/Slotted Square Drive Square Drive
Dottie is an industry leader in Anchor Kits. We offer a comprehensive variety for almost any imaginable need.
ANCHOR TYPE
#21 Red Collar #21 Red Collar #21 Red Collar #21 Red Collar #121 White Wing #121 White Wing
#22 #22 #22 #22 #22 #22
Red Red Red Red Red Red
Collar Collar Collar Collar Collar Collar
Phillips/Slotted #22 Red Collar Phillips/Slotted #22 Red Collar Hex/Phil/Slotted #22 Red Collar Hex/Phil/Slotted #22 Red Collar Square Drive #22 Red Collar Square Drive #22 Red Collar Phillips/Slotted #122 Yellow Wing Phillips/Slotted #122 Yellow Wing Hex/Phil/Slotted #122 Yellow Wing Hex/Phil/Slotted #122 Yellow Wing Square Drive #122 Yellow Wing Square Drive #122 Yellow Wing Phillips/Slotted #222 Green Str. Phillips/Slotted #222 Green Str.
12 x 1-1/2 Sheet Metal Screws ( 50 Screws, 50 Anchors ) K14C 29615 D Phillips/Slotted #23 Red Collar K14CTP 29617 T Phillips/Slotted #23 Red Collar
K14CHX 29550 K14CHXTP 29552 K14CDD K14CDDTP 3AK 3AKTP
29554 29556 29635 29637
D T D T D T
Triple Grip Kits Contain: TG6KTP 81647 TG6KSQTP 81649 TG6KHXTP 81651 Triple Grip Kits Contain: TG8KTP 81653 TG8KSQTP 81655 TG8KHXTP 81657 Triple Grip Kits Contain: TG10KTP 81659 TG10KSQTP 81661 TG10KHXTP 81663 Triple Grip Kits Contain: TG12KTP 81665 TG12KSQTP 81667 TG12KHXTP 81669
Hex/Slotted Hex/Slotted
Square Drive Square Drive Phillips/Slotted Phillips/Slotted
#23 Red Collar #23 Red Collar
#23 Red Collar #23 Red Collar #123 Yellow Wing #123 Yellow Wing
100 6 x 1-1/4" Screws, 100 #6 Anchors #6 Phillips/Slotted #6 Beige #6 Square Drive #6 Beige #6 Hex/Slotted #6 Beige 100 8 x 1-1/4" Screws, 100 #8 Anchors #8 Phillips/Slotted #8 Gray #8 Square Drive #8 Gray #8 Hex/Slotted #8 Gray 100 10 x 1-1/2" Screws, 100 #10 Anchors #10 Phillips/Slotted #10 Blue #10 Square Drive #10 Blue #10 Hex/Slotted #10 Blue 50 12 x 1-1/2" Screws, 50 #12 Anchors #12 Phillips/Slotted #12 Green #12 Square Drive #12 Green #12 Hex/Slotted #12 Green
See new products at lhdottie.com
DRILL STD MSTR WT/STD UNIT 3/16" 3/16" 3/16" 3/16" 3/16" 3/16"
1 1 1 1 1 1
10 6 10 6 10 6
0.59# 0.59# 0.54# 0.54# 0.60# 0.60#
Ea Ea Ea Ea Ea Ea
1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1 1 1 1 1 1
10 6 10 6 10 6
0.83# 0.83# 0.82# 0.82# 0.84# 0.84#
Ea Ea Ea Ea Ea Ea
5/16" 5/16"
1 1
10 6
0.95# 0.95#
Ea Ea
1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"
1 1 1 1 1 1 1 1 1 1 1 1 1 1
10 6 10 6 10 6 10 6 10 6 10 6 10 6
1.03# 1.03# 1.05# 1.05# 1.01# 1.01# 1.11# 1.11# 1.04# 1.04# 1.06# 1.06# 1.02# 1.02#
Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea Ea
5/16" 5/16"
1 1
10 6
0.99# 0.99#
Ea Ea
1/4" 1/4" 1/4"
1 1 1
6 6 6
0.80# 0.80# 0.80#
Ea Ea Ea
5/16" 5/16" 5/16"
1 1 1
6 6 6
1.30# 1.30# 1.30#
5/16" 5/16" 5/16" 5/16"
1/4" 1/4" 1/4"
3/8" 3/8" 3/8"
1 1 1 1
1 1 1
1 1 1
10 6 10 6
6 6 6
6 6 6
0.99# 0.99# 0.95# 0.95#
0.90# 0.90# 0.90#
1.30# 1.30# 1.30#
ANCHORS & KITS > ANCHOR KITS
• Display or Tuff Pack • Caution! Always Wear Eye Protection
• 100 Sheet Metal Screws • 100 Anchors • Carbide Masonry Drill
Ea Ea Ea Ea
Ea Ea Ea
Ea Ea Ea
Ea Ea Ea
B13
Wall Dog - Phillips / Square / Hex PC 4731
ANCHORS & KITS
CAT NO
WDOG
UPC
• Self-drills small hole in wallboard • Installs quickly and easily with a Phillips screwdriver • Can be easily backed-out • No need for shields • Case hardened steel anchor • No hole spotting • Installs in wallboard, plywood, concrete, hollow or grout filled block, brick and plaster DESCRIPTION
31395
100 Chrome Phillips Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2PL Phillips Power Bit 100 White Phillips Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2PL Phillips Power Bit 100 Chrome Square Wall Dog 1 3/16” Carbide Tip Drill Bit 1 IB2L Square Drive Power Bit 100 Chrome Hex Drive Wall Dog 1 3/16" Carbide Tip Drill Bit 1 MT10 Magnetic Hex Bit
WDOGW 31396 SQDOG
16290
HXDOG
81016
• No second step, installs directly through fixture into wallboard • Patented design provides for smooth entry, clean cutting and a powerful hold • Thread design prevents spinning and stripping • Heat treated point penetrates metal and wood studs • When removed it leaves a much smaller hole than toggles or other systems STD
MSTR
WT/STD
UNIT
1
10
1.67#
Ea
1
10
1.67#
Ea
1
10
1.67#
Ea
1
10
1.67#
Ea
Wall Driller Kits • Phillips / Square / Wafer PC 4730
CAT NO
UPC
Phillips / Slotted WDK6 29780 WDK6T 29855 WDK6N 29781 WDK6NT 29857 WDK8 29786 WDK8T 29862 WDK8N 29787 WDK8NT 29864
Square Drive WDK6SQ WDK6SQT WDK6NSQ WDK6NSQT WDK8SQ WDK8SQT WDK8NSQ WDK8NSQT
29790 29866 29791 29868 29796 29872 29797 29874
Wafer Head Phillips / WDK8W 81518 WDK8WT 81519 WDK8NW 81520 WDK8NWT 81521 WDK8WSQ WDK8WSQT WDK8NWSQ WDK8NWSQT
B14
81522 81523 81524 81525
• Easy To Spot • Reusable • Deep Threads
D-DISPLAY PACK T-TUFF PACK
D T D T D T D T
6 6 6 6 8 8 8 8
D T D T
8 8 8 8
D T D T
6 6 6 6
Square Drive D T D T D T D T
8 8 8 8 8 8 8 8
• Includes Bit • 50 Phillips/Square/Wafer Sheet Metal Screws
SCREW SIZE
ANCHOR BIT
x x x x x x x x
1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4"
Zinc Zinc Nylon Nylon Zinc Zinc Nylon Nylon
x x x x
1-1/4" 1-1/4" 1-1/4" 1-1/4"
Zinc Zinc Nylon Nylon
x x x x
x x x x x x x x
1" 1" 1" 1"
1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4"
IB1P IB1P IB1P IB1P IB2P IB2P IB2P IB2P
• 50 Zinc or Nylon Anchors • Display or Tuff Pack
STD MSTR WT/STD UNIT 1 1 1 1 1 1 1 1
10 10 10 10 10 10 10 10
0.75# 0.75# 0.46# 0.46# 1.33# 1.33# 0.70# 0.46#
Ea Ea Ea Ea Ea Ea Ea Ea
Zinc Zinc Nylon Nylon
IB1 IB1 IB1 IB1
1 1 1 1
10 10 10 10
0.75# 0.75# 0.46# 0.46#
Ea Ea Ea Ea
Zinc Zinc Nylon Nylon
IB2P IB2P IB2P IB2P
1 1 1 1
10 10 10 10
1.33# 1.33# 0.70# 0.70#
Ea Ea Ea Ea
Zinc Zinc Nylon Nylon
IB2 IB2 IB2 IB2
IB2 IB2 IB2 IB2
1 1 1 1
1 1 1 1
10 10 10 10
10 10 10 10
1.33# 1.33# 0.70# 0.46#
1.33# 1.33# 0.70# 0.46#
Ea Ea Ea Ea
Ea Ea Ea Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
Driller Toggle Kits PC 4750
CAT NO
WDT83 WDT363 WDT43
UPC
81022 81023 81024
• Reusable • Metal/Engineered Plastic
STRENGTH
CONTENTS
YOU CAN DEPEND ON!
STD MSTR WT/STD UNIT
35-1/8" Driller Toggle (1/8" x 3" Truss Hd. Mach. Screws) 1 25-3/16" Driller Toggle (3/16" x 3" Truss Hd. Mach. Screws) 1 20-1/4" Driller Toggle (1/4" x 3" Truss Hd. Mach. Screws) 1
TEST RESULTS
DRYWALL THICKNESS
TENSION (LBS)
3/8" 1/2" 5/8"
87 106 160
6 6 6
1.10# 1.65# 1.65#
Ea Ea Ea
FEATURES • No Pre-Drilling • Quick & Easy • Ideal for Ceiling Applications • Combo Truss Head Screws • Versatile for 3/8", 1/2" and 5/8" Drywall! • Includes Phillips Power Bit
SHEAR (LBS)
231 253 285
NOTE: The values listed above are ultimate load capacities which should be reduced by a minimum safety factor of 4 or greater to determine the allowable working load.
ANCHORS & KITS
• Driller Toggle • Includes Screws & Power Bit
Nylon Button Head and Toggle Anchor Kits PC 4610 • 100 Nylon Button Head Anchors With Pin • 1 Carbide Masonry Drill • Display or Tuff Pack
CAT NO
UPC
• 25 Nylon Toggle Anchors • 25 Sheet Metal Screws • 1 Carbide Masonry Drill • Display or Tuff Pack
D-DISPLAY PACK T-TUFF PACK
Nylon Button Head Anchors with Pins 711 711TP
714 714TP
18535 18537
18540 18545
D T
D T
Nylon Toggle Anchors with Screws
NTK14L NTK14LTP
NTK38L NTK38LTP
66797 66800
66799 66802
D T
D T
SIZE
3/16 x 1" 3/16 x 1"
1/4 x 1" 1/4 x 1"
8 x 1-1/2" 8 x 1-1/2"
10 x 1-1/2" 10 x 1-1/2"
ANCHOR TYPE DRILL STD MSTR WT/STD UNIT 1711 1711
3/16" 3/16"
1 1
10 10
0.67# 0.67#
Ea Ea
NT14L NT14L
1/4" 1/4"
1 1
10 10
0.39# 0.39#
Ea Ea
1714 1714
NT38L NT38L
1/4" 1/4"
3/8" 3/8"
1 1
10 10
1 1
10 10
0.72# 0.72#
0.49# 0.49#
Ea Ea
Ea Ea
Strap Toggle Kits PC 4735 • Strap Toggle • Nylon • Includes Screws • Reusable
The strap toggle is a heavy duty hollow wall anchor for use in base materials such as plaster, wallboard, or hollow tile. The strap toggle is a preassembled anchor consisting of a carbon steel wing and a locking cap/ratchet leg assembly molded from engineered plastic. It is available in both 3/16" and 1/4" size. When compared to traditional toggles, this unique anchor can be installed in a smaller hole and does not require a fixture or screw to set it. The anchor can easily be adjusted to accommodate a wall thickness of up to 2-1/2". The toggle remains captive.
CAT NO
UPC
STK25
10526
STK36
10524
DESCRIPTION
STD
MSTR
1
10
25 3/16 x 4" Strap Toggles and 1 25 3/16 x 4" Mushroom Head Screws 25 1/4 x 4" Strap Toggles and 25 1/4 x 4" Mushroom Head Screws
See new products at lhdottie.com
10
WT/STD UNIT 1.67#
1.89#
Ea
Ea
B15
Fastener Kits PC 4760
ANCHORS & KITS > FASTENER KITS
Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need.
CAT NO
UPC
632
18140
632DD
29655
632PS
29657
832DS
29665
832PS
29660
1032PS
10323
1420PS
14205
DESCRIPTION
Stove Bolt Kits with Nuts 316 16560 1420
14200
Hex Nut Kit 339 17000
• Reusable Six Compartment Box • Handy Assortment
STD MSTR WT/STD UNIT
370 Assorted 6-32 Slotted Flat Head Machine Screws; 3/4" Thru 3" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 370 Assorted 6-32 Square/Phillips Flat Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 370 Assorted 6-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2", 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 310 Assorted 8-32 Square/Slotted Round Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 60 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 370 Assorted 8-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 100 - 1/2", 75 - 3/4", 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2" 245 Assorted 10-32 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 75 - 1/2", 50 - 3/4", 40 - 1", 30 - 1-1/4", 25 - 1-1/2", 25 - 2" 110 Assorted 1/4-20 Phillips/Slotted Round Head Machine Screws; 1/2" Thru 2" 30 - 1/2", 25 - 3/4", 20 - 1," 15 - 1-1/4", 10 - 1-1/2", 10 - 2" 220 Assorted 3/16 (10-24) Slotted Truss Head Stove Bolts with Hex Nuts; 1/2" Thru 2" 50 - 1/2", 50 - 3/4", 40 - 1", 30 - 1-1/4", 30 - 1 1/2", 20 - 2" 110 Assorted 1/4-20 Slotted Truss Head Stove Bolts with Hex Nuts; 1/2" Thru 2" 30 - 1/2", 25 - 3/4", 20 - 1", 15 - 1-1/4", 10 - 1-1/2" 339 Assorted Zinc Plated Hex Nuts 10 sizes: 6-32" Thru 5/8": 50 - 6-32", 50 - 8-32", 50 - 10-24", 25 - 10-32", 25 - 12-24", 75 - 1/4", 25 - 5/16", 30 - 3/8", 6 - 1/2", 3 - 5/8"
1
6
1.85#
Ea
1
6
1.88#
Ea
1
6
1.59#
Ea
1
6
2.31#
Ea
1
6
2.30#
Ea
1
6
3.13#
Ea
1
6
1.87#
Ea
1
6
2.82#
Ea
1
6
2.77#
Ea
1
6
2.60#
Ea
Machine Screw Kit • Truss Head PC 4760
Dottie introduces the Truss Head Combo Assorted Machine Screw Kit. Contractors speak and Dottie listens. These Truss Head Machine Screws are needed when installing wiring devices behind wall plates. Great when a low profile fastener is needed.
CAT NO
632TCS
B16
UPC
29658
DESCRIPTION
• Truss Head • Phillips / Slotted
STD
MSTR
370 Assorted 6-32 Slotted / Phillips 1 6 Truss Head Machine Screws; 1/2" thru 2" 100 - 1/2", 75 - 3/4, 75 - 1", 50 - 1-1/4", 40 - 1-1/2", 30 - 2"
• Low Profile • Zinc Plated
WT/STD 1.59#
UNIT Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
Fastener Kits PC 4760 CAT NO
UPC
#6 6PS
15015
6HX
15012
6TR
15017
#8 8PS
15021
8HX
59254
8TR
59258
#10 10PS
15031
10HX
59256
10TR
59260
• Handy Assortment
Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need.
DESCRIPTION
300 Assorted #6 Phillips/Slotted Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #6 Slotted Hex Washer Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #6 Square-Drive Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2"
STD MSTR WT/STD UNIT 1
6
1.24#
Ea
1
6
1.26#
Ea
1
6
1.27#
Ea
1
6
1.75#
Ea
1
6
1.76#
Ea
1
6
1.79#
Ea
2.35#
Ea
2.30#
Ea
2.22#
Ea
6
1.57#
Ea
1
6
1.84#
Ea
335 Assorted Wood Rockets 1 80 - 6 x 1", 70 - 6 x 1-1/8", 65 - 6 x 1-1/4", 45 - 6 x 1-5/8", 40 - 6 x 2", 35 - 6 x 2-1/4"
6
2.17#
Ea
300 Assorted #8 Phillips/Slotted Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #8 Slotted Hex Washer Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2" 300 Assorted #8 Square-Drive Pan Head Sheet Metal Screws: 1/2" Thru 2" 75 - 1/2", 75 - 3/4", 50 - 1", 40 - 1-1/4", 35 - 1-1/2", 25 - 2"
210 Assorted #10 Phillips/Slotted Pan 1 6 Head Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20 - 2" 210 Assorted #10 Slotted Hex 1 6 Washer Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20 - 2" 210 Assorted #10 Square-Drive Pan 1 6 Head Sheet Metal Screws: 1/2" Thru 2" 60 - 1/2", 40 - 3/4", 35 - 1", 30 - 1-1/4", 25 - 1-1/2", 20
Wall Plate Screw Kit ( 12 Compartment Box ) APS1 27640 450 Assorted Wall Plate Screws 1 1/2" Lengths - 100 Ea: White & Ivory, 25 Ea: Almond, Stainless, Brass, Nylon; 3/4" Lengths - 25 Ea: White, Ivory & Almond; 1" Lengths - 25 Ea: White, Ivory & Almond Wall Plate Screw Kit ( 6 Compartment Box ) APS2 27642 450 Assorted Wall Plate Screws Ivory, White, & Almond: 50 - 5/16", 50 - 1/2", 30 - 3/4", 20 - 1" Wood Rocket Kit WR6 15055
Concrete Anchoring System Kit PC 4760 CAT NO CK14
UPC
81517
DESCRIPTION
Hex 20 20 20 -
Head Slotted - Blue Finish 14H114 1/4" x 1-1/4" 14H134 1/4" x 1-3/4" 14H214 1/4" x 2-1/4"
See new products at lhdottie.com
- 2"
ANCHORS & KITS > FASTENER KITS
• Reusable Six Compartment Box
STD MSTR WT/STD UNIT 1
6
1.55#
Ea
B17
Self Drilling Screw Kits - Zinc Plated PC 4810
ANCHORS & KITS > SCREW & WASHER KITS
Dottie introduced assorted screw kits over 40 years ago and has a comprehensive variety for almost any imaginable need.
CAT NO #8 TK800
UPC
17705
TK800DD 17706 TK800PH 17707 #10 TK100
17770
TK100DD 17701 TK100PH 17702 #8 and #10 TK810 17710 TK810DD 17711 TK810PH 17712
CAT NO
UPC
Flat Washer Kit FW2 15050 Fender Washer Kit FENWK 15539 Lock Washer Kit LWK 31005
B18
DESCRIPTION
• Installation Tool • Reusable Six Compartment Box
STD
MSTR WT/STD UNIT
240 Assorted Self Drilling 1 6 Hex Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4" 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - MT8 Magnetic Driver 240 Assorted Self Drilling 1 6 Square Drive Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - IB2 Insert Bit 240 Assorted Self Drilling 1 6 Phillips Head Screw: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 30 - 8 x 1-1/4", 25 - 8 x 1-1/2", 20 - 8 x 2", + 1 - IB2P Insert Bit
1.50#
Ea
1.41#
Ea
1.84#
Ea
240 Assorted Self Drilling 1 6 1.85# Hex Head Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - MT10 Magnetic Driver 240 Assorted Self Drilling 1 6 1.85# Square Drive Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - IB2 Insert Bit 240 Assorted Self Drilling 1 6 1.84# Phillips Head Screws: 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", 30 - 10 x 1-1/4", 25 - 10 x 1-1/2", 20 - 10 x 2", + 1 - IB2P Insert Bit
Ea
295 Assorted Self Drilling 1 Hex Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 50 - 10 x 1/2", 50 - 10 x 3/4", 30 - 10 x 1", + 1 Each; MT8 & MT10 Magnetic Drivers 330 Assorted Self Drilling 1 Square Drive Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", + 1 - IB2 Insert Bit 330 Assorted Self Drilling 1 Phillips Head Screws: 75 - 8 x 1/2", 50 - 8 x 3/4", 40 - 8 x 1", 75 - 10 x 1/2", 50 - 10 x 3/4", 40 - 10 x 1", + 1 - IB2P Insert Bit
Washer Kits PC 4760
DESCRIPTION
Flat Washer Kit (2 pounds) #8 120 pcs, #10 120 pcs, 1/4" 60 pcs, 5/16" 30 pcs, 3/8" 85 pcs, 1/2" 6 pcs
Ea Ea
6
1.92#
Ea
6
1.90#
Ea
6
1.86#
Ea
STD MSTR WT/STD UNIT 1
6
2.00#
Ea
120 Assorted Zinc Plated Fender Washers 3 Sizes: 3/16 x 1-1/4", 1/4 x 1-1/4", 3/8 x 1-1/4" 40 Each Size
1
6
2.54#
Ea
415 Assorted Zinc Plated Lock Washers 6 Sizes: #8, #10, 1/4", 5/16", 3/8", 1/2" 100 - #8, 100 - #10, 100- 1/4", 50 - 5/16", 40 - 3/8", 25 - 1/2"
1
6
1.38#
Ea
To Order: Phone (323)725-1000 / Fax (323)721-0000
