Dreamland - Quilting Treasures
Dreamland
Designed By: Sue Harvey and Sandy Boobar of Pine Tree Country Quilts Finished Quilt Size: 41" x 57" Finished Block Size: 4" x 4" Number of Blocks: 36 quiltingtreasures.com
1
© Liz Goodrick-Dillon
Dreamland FABRIC REQUIREMENTS Design: 24275 X
24278 X
24276 B
24278 XZ
24276 V
21517 Z
24276 V 24278 X (includes binding)
11/4
24278 XZ 21517 Z
1/2 11/4
24277 B (backing only)
33/4
24277 B
Cutting Directions: WOF = width of fabric from selvage to selvage. Remove as little fabric as possible when squaring strip ends.
21517 Z - White Tonal • Cut (4) 43/8" x WOF strips; recut into (32) 43/8" squares and (8) 2" squares. • Cut (1) 21/2" x WOF strip; recut into (8) 21/2" x 4" rectangles. • Cut (5) 2" x WOF strips for first border; trim 2 strips to 391/2" lengths. • Cut (3) 11/2" x WOF strips; recut into (2) 11/2" x 341/2" strips and (2) 11/2" x 201/2" strips for panel frame.
24275 X - Dreamland Panel • Fussy-cut (1) 181/2" x 341/2" rectangle from the panel center. 24276 B - Blue Fairy Print • Cut (2) 41/2" x WOF strips; recut into (18) 41/2" squares.
24277 B - Scenic Print (Backing) • Cut (2) 65" x WOF backing pieces.
24276 V - Purple Fairy Print • Cut (2) 41/2" x WOF strips; recut into (18) 41/2" squares. 24278 X - Dark Wing Print • Cut (1) 71/2" x WOF strip; recut into (32) 11/4" x 71/2" strips. • Cut (1) 21/2" x WOF strip; recut into (8) 21/2" x 3" rectangles. • Cut (5) 11/2" x WOF strips for outer border; trim 2 strips to 411/2" lengths. • Cut (6) 21/4" x WOF strips for binding. 24278 XZ - Light Wing Print • Cut (5) 21/2" x WOF strips; recut into (72) 21/2" squares.
quiltingtreasures.com
2/3 or 1 repeat 3/8 3/8
24276 B
24275 X
Yards
2
Dreamland Stripe Blocks Note: Use a 1/4" seam allowance for all stitching.
2. Place a marked A rectangle right sides together on the right end of a 21/2" x 4" white rectangle. Stitch on the marked line. Trim seam allowance 1/4" from the stitched line. Press the dark wing rectangle open to complete a 21/2" x 41/2" angled A unit. Repeat to make 4 angled A units. Repeat to make 4 angled B units, placing the marked B rectangles on the left end of the white rectangles.
1. Draw a diagonal line on the wrong side of each 21/2" light wing square and 2" white square. Set aside 8 light wing squares and the white squares for Corner blocks. 2. Place a marked light wing square right sides together on opposite corners of each 43/8" white square. Stitch on the lines. Trim seam allowances 1/4" from the stitched lines. Press the light wing triangles open. Cut the squares in half on the unpieced diagonal to make 64 pieced triangles.
Angled A Unit — Make
4
Angled B Unit — Make 4
3. Place a marked 21/2" light wing square on the white end of each angled unit and a marked 2" white square on the dark wing rectangle end. Stitch on the marked lines. Trim seam allowances 1/4" from the stitched lines. Press the light wing triangles open with seams toward the triangles. Press the white triangles open with seams toward the dark wing pieces to complete 4 each A and B units. Pieced Triangle- Make 64 3. Center and sew a pieced triangle to opposite long sides of A Unit — Make 4 B Unit — Make 4 each 11/4" x 71/2" dark wing strip. Press seams toward the strip. Trim the strip ends even with the edges of the 4. Sew an A unit to a B unit to complete a 41/2" x 41/2" pieced triangles to complete (32) 41/2" x 41/2" Stripe Center block, matching the dark wing pieces to form a blocks. point. Press seam open. Repeat to make 4 blocks.
Stripe Block Make 32
Center Blocks
Center Block — Make 4
1. Make a mark 21/2" from the top right corner on the wrong side of a 21/2" x 3" dark wing rectangle. Draw a line from the mark to the top left corner to make an A rectangle. Repeat to mark 4 A rectangles. Repeat to mark 4 B rectangles, measuring 21/2" from the top left corner and drawing a line to the top right corner.
Mark 4 of each
quiltingtreasures.com
3
Dreamland Quilt Assembly Refer to the exploded quilt diagram as needed throughout the following steps.
7. Stitch the (3) 11/2" x WOF dark wing strips short ends together to make a long strip. Press seams to 1 side. Cut into (2) 551/2" strips. Sew the strips to the long sides of the quilt center and the 11/2" x 411/2" dark wing strips to the top and bottom. Press seams toward the strips to complete the quilt top.
1. Sew the 11/2" x 341/2" white strips to the long sides of the panel rectangle. Press seams toward the panel. Stitch the 11/2" x 201/2" white strips to the top and bottom to complete the 201/2" x 361/2" panel center. Press seams toward the panel.
8. Remove the selvage edges from the backing pieces. Join the pieces on the long edges with a 1/2" seam allowance. Press seam open. Trim the side edges to make a 49" x 65" backing piece.
2. Sew a Stripe block to a 41/2" blue fairy square to make a 41/2" x 81/2" blue block unit. Press seam toward the square. Repeat to make 8 blue block units and 8 reverse blue block units. Repeat with the 2 remaining blue fairy squares and 2 Center blocks to make 2 blue center units.
9. Layer the top with the backing and a 49" x 65" batting piece. Quilt as desired. Trim edges even with the top. 10. Prepare dark wing binding and bind edges using your favorite method to complete the quilt.
Blue Block Unit Make 8
Reverse Blue Block Unit Make 8
Blue Center Unit
Make 2
3. Repeat step 2 with Stripe blocks and Center blocks and the 41/2" purple fairy squares to make 8 purple block units, 8 reverse purple block units and 2 purple center units.
Purple Block Unit Make 8
Reverse Purple Block Unit Make 8
Purple Center Unit
Make 2
4. Join 2 each blue, reverse blue, purple and reverse purple block units with 1 blue center unit to make an 81/2" x 361/2" side strip. Press seams to 1 side. Repeat to make a second side strip. Sew the strips to the long sides of the panel center. Press seams toward the strips. 5. Join 2 each blue, reverse blue,purple and reverse purple block units with 1 purple center unit to make the 81/2" x 361/2" top strip. Press seams to 1 side. Repeat to make the bottom strip. Stitch the strips to the top and bottom of the panel center. Press seams toward the strips. 6. Sew the (3) 2" x WOF white strips short ends together to make a long strip. Press seams to 1 side. Cut into (2) 521/2" strips. Stitch the strips to the long sides of the quilt center and the 2" x 391/2" white strips to the top and bottom. Press seams toward the strips.
quiltingtreasures.com
Exploded Quilt Diagram
4
© Quilting Treasures
Not For Resale/Fall 2015
Designed By: Sue Harvey and Sandy Boobar of Pine Tree Country Quilts Finished Quilt Size: 41" x 57" Finished Block Size: 4" x 4" Number of Blocks: 36 quiltingtreasures.com
1
© Liz Goodrick-Dillon
Dreamland FABRIC REQUIREMENTS Design: 24275 X
24278 X
24276 B
24278 XZ
24276 V
21517 Z
24276 V 24278 X (includes binding)
11/4
24278 XZ 21517 Z
1/2 11/4
24277 B (backing only)
33/4
24277 B
Cutting Directions: WOF = width of fabric from selvage to selvage. Remove as little fabric as possible when squaring strip ends.
21517 Z - White Tonal • Cut (4) 43/8" x WOF strips; recut into (32) 43/8" squares and (8) 2" squares. • Cut (1) 21/2" x WOF strip; recut into (8) 21/2" x 4" rectangles. • Cut (5) 2" x WOF strips for first border; trim 2 strips to 391/2" lengths. • Cut (3) 11/2" x WOF strips; recut into (2) 11/2" x 341/2" strips and (2) 11/2" x 201/2" strips for panel frame.
24275 X - Dreamland Panel • Fussy-cut (1) 181/2" x 341/2" rectangle from the panel center. 24276 B - Blue Fairy Print • Cut (2) 41/2" x WOF strips; recut into (18) 41/2" squares.
24277 B - Scenic Print (Backing) • Cut (2) 65" x WOF backing pieces.
24276 V - Purple Fairy Print • Cut (2) 41/2" x WOF strips; recut into (18) 41/2" squares. 24278 X - Dark Wing Print • Cut (1) 71/2" x WOF strip; recut into (32) 11/4" x 71/2" strips. • Cut (1) 21/2" x WOF strip; recut into (8) 21/2" x 3" rectangles. • Cut (5) 11/2" x WOF strips for outer border; trim 2 strips to 411/2" lengths. • Cut (6) 21/4" x WOF strips for binding. 24278 XZ - Light Wing Print • Cut (5) 21/2" x WOF strips; recut into (72) 21/2" squares.
quiltingtreasures.com
2/3 or 1 repeat 3/8 3/8
24276 B
24275 X
Yards
2
Dreamland Stripe Blocks Note: Use a 1/4" seam allowance for all stitching.
2. Place a marked A rectangle right sides together on the right end of a 21/2" x 4" white rectangle. Stitch on the marked line. Trim seam allowance 1/4" from the stitched line. Press the dark wing rectangle open to complete a 21/2" x 41/2" angled A unit. Repeat to make 4 angled A units. Repeat to make 4 angled B units, placing the marked B rectangles on the left end of the white rectangles.
1. Draw a diagonal line on the wrong side of each 21/2" light wing square and 2" white square. Set aside 8 light wing squares and the white squares for Corner blocks. 2. Place a marked light wing square right sides together on opposite corners of each 43/8" white square. Stitch on the lines. Trim seam allowances 1/4" from the stitched lines. Press the light wing triangles open. Cut the squares in half on the unpieced diagonal to make 64 pieced triangles.
Angled A Unit — Make
4
Angled B Unit — Make 4
3. Place a marked 21/2" light wing square on the white end of each angled unit and a marked 2" white square on the dark wing rectangle end. Stitch on the marked lines. Trim seam allowances 1/4" from the stitched lines. Press the light wing triangles open with seams toward the triangles. Press the white triangles open with seams toward the dark wing pieces to complete 4 each A and B units. Pieced Triangle- Make 64 3. Center and sew a pieced triangle to opposite long sides of A Unit — Make 4 B Unit — Make 4 each 11/4" x 71/2" dark wing strip. Press seams toward the strip. Trim the strip ends even with the edges of the 4. Sew an A unit to a B unit to complete a 41/2" x 41/2" pieced triangles to complete (32) 41/2" x 41/2" Stripe Center block, matching the dark wing pieces to form a blocks. point. Press seam open. Repeat to make 4 blocks.
Stripe Block Make 32
Center Blocks
Center Block — Make 4
1. Make a mark 21/2" from the top right corner on the wrong side of a 21/2" x 3" dark wing rectangle. Draw a line from the mark to the top left corner to make an A rectangle. Repeat to mark 4 A rectangles. Repeat to mark 4 B rectangles, measuring 21/2" from the top left corner and drawing a line to the top right corner.
Mark 4 of each
quiltingtreasures.com
3
Dreamland Quilt Assembly Refer to the exploded quilt diagram as needed throughout the following steps.
7. Stitch the (3) 11/2" x WOF dark wing strips short ends together to make a long strip. Press seams to 1 side. Cut into (2) 551/2" strips. Sew the strips to the long sides of the quilt center and the 11/2" x 411/2" dark wing strips to the top and bottom. Press seams toward the strips to complete the quilt top.
1. Sew the 11/2" x 341/2" white strips to the long sides of the panel rectangle. Press seams toward the panel. Stitch the 11/2" x 201/2" white strips to the top and bottom to complete the 201/2" x 361/2" panel center. Press seams toward the panel.
8. Remove the selvage edges from the backing pieces. Join the pieces on the long edges with a 1/2" seam allowance. Press seam open. Trim the side edges to make a 49" x 65" backing piece.
2. Sew a Stripe block to a 41/2" blue fairy square to make a 41/2" x 81/2" blue block unit. Press seam toward the square. Repeat to make 8 blue block units and 8 reverse blue block units. Repeat with the 2 remaining blue fairy squares and 2 Center blocks to make 2 blue center units.
9. Layer the top with the backing and a 49" x 65" batting piece. Quilt as desired. Trim edges even with the top. 10. Prepare dark wing binding and bind edges using your favorite method to complete the quilt.
Blue Block Unit Make 8
Reverse Blue Block Unit Make 8
Blue Center Unit
Make 2
3. Repeat step 2 with Stripe blocks and Center blocks and the 41/2" purple fairy squares to make 8 purple block units, 8 reverse purple block units and 2 purple center units.
Purple Block Unit Make 8
Reverse Purple Block Unit Make 8
Purple Center Unit
Make 2
4. Join 2 each blue, reverse blue, purple and reverse purple block units with 1 blue center unit to make an 81/2" x 361/2" side strip. Press seams to 1 side. Repeat to make a second side strip. Sew the strips to the long sides of the panel center. Press seams toward the strips. 5. Join 2 each blue, reverse blue,purple and reverse purple block units with 1 purple center unit to make the 81/2" x 361/2" top strip. Press seams to 1 side. Repeat to make the bottom strip. Stitch the strips to the top and bottom of the panel center. Press seams toward the strips. 6. Sew the (3) 2" x WOF white strips short ends together to make a long strip. Press seams to 1 side. Cut into (2) 521/2" strips. Stitch the strips to the long sides of the quilt center and the 2" x 391/2" white strips to the top and bottom. Press seams toward the strips.
quiltingtreasures.com
Exploded Quilt Diagram
4
© Quilting Treasures
Not For Resale/Fall 2015
