Dremel 8200 Disassembly

Dremel 8200 Disassembly

Dremel 8200 Disassembly disassembling your Dremel 8200.

Written By: mitchellbarnhart

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 7

Dremel 8200 Disassembly

INTRODUCTION disassembling your Dremel 8200.

TOOLS: Phillips #0 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 7

Dremel 8200 Disassembly

Step 1 — Dremel 8200



take off the screw cap at the top

Step 2



Take out the battery

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 7

Dremel 8200 Disassembly

Step 3 

remove oblong belt clip



Unscrew screws

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 7

Dremel 8200 Disassembly

Step 5 

take back u clip out carefully

 Be very careful to not injure yourself

Step 6



the casing should just open right up and be easily accessible

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 7

Dremel 8200 Disassembly

Step 7 

you can remove the buttons except for the sliding one that adjusts the speed

Step 8



you can take the motor out first and it will be a little hard to do so



work your way down ad take out each successive circuit board



the last thing to be out should be the sliding speed adjustment and the button for that should fall right out

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 7

Dremel 8200 Disassembly

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-19 09:57:21 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 7 of 7