dual mode pressure switch - Nebo Tools
ITEM#5954
™
DUAL MODE PRESSURE SWITCH • MEASUREMENTS Coiled - 17.71” (450 mm) Extended - 39.37” (1,000 mm)
• DUAL MODE
This switch incorporates two buttons inside the switch, one for momentary operation and the other for steady on.
Specifically designed to be used with the following products:
Steady Switch Momentary Switch
• #5557, #5581, #5599 & #5610 NEBO® REDLINE® • #5463 & #5564 CHAMELEON™ • #5565 PROTEC™ Laser / Flashlight Combo • #5566 PROTEC™ Elite Laser / Flashlight Combo • #5586 U.S. Army TAC-110Z • #5624 NEBO® REDLINE® 220 Lumen Bright Light • #5630 PROTEC™ REDLINE® • #5631 PROTEC™ GREENLIGHT™ • #5632 PROTEC™ REDLIGHT™ • #5929 PROTEC™ PRO-220 Light
PROTEC™ Dual Mode Pressure Switch is the accessory to have, especially if you already have NEBO® or PROTEC™ flashlight. At it’s coiled resting position, the switch is just over 17”, but can extend to over 3’ to suit your specific needs. The most important feature is the dual mode. The steady switch uses hard/soft touch technology allowing settings to be changed in two different ways. Hard touch: Simply click through the functions (light will turn off in between settings.) NOTE: Some lights will reset to first setting (100% ON) after being off for 10 seconds. Soft touch: Press button halfway with no click. This allows the user to cycle through the settings quickly without the light turning off between settings.
The momentary switch activates the light only while pressure is being applied to the button. (Light will change settings with each use. *NOTE: Some lights will reset to first setting (100% ON) after being off for 10 seconds.)
™
DUAL MODE PRESSURE SWITCH • MEASUREMENTS Coiled - 17.71” (450 mm) Extended - 39.37” (1,000 mm)
• DUAL MODE
This switch incorporates two buttons inside the switch, one for momentary operation and the other for steady on.
Specifically designed to be used with the following products:
Steady Switch Momentary Switch
• #5557, #5581, #5599 & #5610 NEBO® REDLINE® • #5463 & #5564 CHAMELEON™ • #5565 PROTEC™ Laser / Flashlight Combo • #5566 PROTEC™ Elite Laser / Flashlight Combo • #5586 U.S. Army TAC-110Z • #5624 NEBO® REDLINE® 220 Lumen Bright Light • #5630 PROTEC™ REDLINE® • #5631 PROTEC™ GREENLIGHT™ • #5632 PROTEC™ REDLIGHT™ • #5929 PROTEC™ PRO-220 Light
PROTEC™ Dual Mode Pressure Switch is the accessory to have, especially if you already have NEBO® or PROTEC™ flashlight. At it’s coiled resting position, the switch is just over 17”, but can extend to over 3’ to suit your specific needs. The most important feature is the dual mode. The steady switch uses hard/soft touch technology allowing settings to be changed in two different ways. Hard touch: Simply click through the functions (light will turn off in between settings.) NOTE: Some lights will reset to first setting (100% ON) after being off for 10 seconds. Soft touch: Press button halfway with no click. This allows the user to cycle through the settings quickly without the light turning off between settings.
The momentary switch activates the light only while pressure is being applied to the button. (Light will change settings with each use. *NOTE: Some lights will reset to first setting (100% ON) after being off for 10 seconds.)
