Early Blossoms
Early Blossoms
#FR-052
60" x 24" Designed by Heidi Pridemore
Fabric Requirements:
You will also need:
Featuring Assorted Basics from P&B Textiles
• 2 yards of fabric for the backing • 68” x 32” piece of batting • GO! Half Square Triangles 4" finished (55031) • GO! Hunter Star 6” finished (55166) • GO! Quarter Square Triangles 4” finished (55047) • Basic Sewing Supplies & Tools
• Gray Leaves (CONT-252S) 2/3 yard • Teal Dots (CONT-256B) 1/3 yard • Peach Heart Leaves (CONT-255I) 3/4 yard • Teal Vines (CONT-254B) 2/3 yard • White Leaves (CONT-252W) 2/3 yard • White 2/3 yard
All shape designs ©1990-2014 by AccuQuilt. AccuQuilt®, AccuQuilt GO!®, GO!® and GO! Baby® are registered trademarks of AccuQuilt. Used with permission.
O -1/18/16
©2016 All Rights Reserved The Whimsical Workshop
Page 1
O-1/18/16
Early Blossoms
#FR-052
60” x 24”
Designed by Heidi Pridemore Please read all instructions before starting. Measurement on borders are approximate. Measure your quilt top before cutting. Use a 1/4” seam allowance unless otherwise noted. Width of Fabric = WOF, Length of Fabric = LOF
Cutting Instructions:
Note: This project is made using the GO! Hunter Star - 6” finished (55166), the GO! Half Square Triangles 4” finished (55031) and the GO! Quarter Square Triangles - 4” finished (55047) to cut the shapes. Gray Leaves (A) • Cut two 10 ½” x WOF strips. Sub-cut sixteen 4 ½” x 10 ½” strips. Using the GO! Hunter Star - 6” finished die to cut sixteen Hunter Star sets. You will only use the Large Triangles and Long Trapezoids. Teal Dots (B) • Cut two 4” x WOF strips. Sub-cut thirty-two 2 ½” x 4” strips. Using the GO! Hunter Star - 6” finished die to cut thirty-two short Trapezoids. Peach Heart Leaves (C) • Cut three 2 ½” x WOF strips. Sew the strips together end to end with a diagonal seam and cut two 2 ½” x 52 ½” strips. • Cut one 2 ½” x WOF strip. Sub-cut into 2 ½” x 12 ½” strips. • Cut five 2 ½” x WOF strips for the binding. Teal Vines (D) • Cut one 11” x WOF strip. Sub-cut eight 5” x 11” strips. Using the GO! Half Square Triangles - 4” finished die to cut thirty-two Large Border Triangles. • Cut one 6” square. Using the GO! Quarter Square Triangles - 4” die to cut four small Border Triangles. Note: You will only need two small Border Triangles. White Leaves (E) • Cut one 11” x WOF strip. Sub-cut eight 5” x 11” strips. Using the GO! Half Square Triangles - 4” finished die to cut thirty-two Large Border Triangles. • Cut one 6” x WOF strip. Sub-cut one 6” x 11” rectangle. Using the GO! Quarter Square Triangles - 4” die cut six small Border Triangles from the rectangle. Also cut four 4 ½” squares from the remaining 6” strip. White (F) • Cut two 10 ½” x WOF strips. Sub-cut sixteen 4 ½” x 10 ½” strips. Using the GO! Hunter Star - 6” finished die to cut sixteen Hunter Star sets Backing (Your Choice) • Cut one 68” x 32” piece for the backing
©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
Page 1
Early Blossoms
O-1/18/16
Assembly Instructions:
1. 2.
Sew one Fabric F-Short Trapezoid to each end of one Fabric A-Long Trapezoid to make one FA Unit (Fig. 1). Repeat to make sixteen FA Units total. Sew one Fabric A-Large Triangle to one FA Unit to make one Unit 1 triangle (Fig. 2). Repeat to make sixteen Unit 1 triangles total. Unit 1 make 16 make 16 F
F
A
A F Fig. 1
3. 4.
A Fig. 2
Sew one Fabric B-Short Trapezoid to each end of one Fabric F-Long Trapezoid to make one BF Unit (Fig. 3). Repeat to make sixteen BF Units total. Sew one Fabric F-Large Triangle to one BF Unit to make one Unit 2 triangle (Fig. 4). Repeat to make sixteen Unit 2 triangles total. Unit 2 make 16 make 16 B
B
F
F B Fig. 3
5.
F
F
B
Fig. 4
Sew together one Unit 1 triangle and one Unit 2 triangle to make one Unit 3 square (Fig. 5). Repeat to make sixteen Unit 3 squares total. Unit 3 make 16 B F F F A B A F Fig. 5
Page 2 ©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
Early Blossoms
O-1/18/16
6.
Sew together four Unit 3 squares to make one block (Fig. 6). Repeat to make four blocks total. make 4
Fig. 6
7. 8. 9.
Sew together one Fabric E-Large Triangle to one Fabric D triangle to make one ED Unit (Fig. 7). Repeat to make 32 ED units total for the outer border. Sew together three Fabric E small triangles and one Fabric D small triangle to make one border unit (Fig. 8). Repeat to make a second border unit.
make 32 E D Fig. 7
make 2 E E E D Fig. 8
Sew together four ED units to make one outer side border (Fig. 9). Repeat to make a second outer side border. make 2
Fig. 9
10.
Sew together two 4 ½” Fabric E squares, twelve ED units and one border unit to make the outer top border (Fig. 10). Repeat to make the outer bottom border. make 2
E
E
Fig. 10
Page 3 ©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
Early Blossoms
O-1/18/16
Runner Top Assembly Instructions: Refer to Runner Layout while assembling.
11. 12. 13. 14. 15. 16.
Sew together the four blocks to make the runner top. Sew one 2 ½” x 12 ½” Fabric C strip to each side of the runner top. Sew one 2 ½” x 52 ½” Fabric C strip to the top and bottom of the runner top. Sew one outer side border to each side of the runner top. Sew one outer top border and outer bottom borders to the runner top. Layer and quilt as desired. Sew the five 2 ½” x LOF Fabric C strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press. Bind as desired.
C
C
C
C
Runner Layout
Page 4 ©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
#FR-052
60" x 24" Designed by Heidi Pridemore
Fabric Requirements:
You will also need:
Featuring Assorted Basics from P&B Textiles
• 2 yards of fabric for the backing • 68” x 32” piece of batting • GO! Half Square Triangles 4" finished (55031) • GO! Hunter Star 6” finished (55166) • GO! Quarter Square Triangles 4” finished (55047) • Basic Sewing Supplies & Tools
• Gray Leaves (CONT-252S) 2/3 yard • Teal Dots (CONT-256B) 1/3 yard • Peach Heart Leaves (CONT-255I) 3/4 yard • Teal Vines (CONT-254B) 2/3 yard • White Leaves (CONT-252W) 2/3 yard • White 2/3 yard
All shape designs ©1990-2014 by AccuQuilt. AccuQuilt®, AccuQuilt GO!®, GO!® and GO! Baby® are registered trademarks of AccuQuilt. Used with permission.
O -1/18/16
©2016 All Rights Reserved The Whimsical Workshop
Page 1
O-1/18/16
Early Blossoms
#FR-052
60” x 24”
Designed by Heidi Pridemore Please read all instructions before starting. Measurement on borders are approximate. Measure your quilt top before cutting. Use a 1/4” seam allowance unless otherwise noted. Width of Fabric = WOF, Length of Fabric = LOF
Cutting Instructions:
Note: This project is made using the GO! Hunter Star - 6” finished (55166), the GO! Half Square Triangles 4” finished (55031) and the GO! Quarter Square Triangles - 4” finished (55047) to cut the shapes. Gray Leaves (A) • Cut two 10 ½” x WOF strips. Sub-cut sixteen 4 ½” x 10 ½” strips. Using the GO! Hunter Star - 6” finished die to cut sixteen Hunter Star sets. You will only use the Large Triangles and Long Trapezoids. Teal Dots (B) • Cut two 4” x WOF strips. Sub-cut thirty-two 2 ½” x 4” strips. Using the GO! Hunter Star - 6” finished die to cut thirty-two short Trapezoids. Peach Heart Leaves (C) • Cut three 2 ½” x WOF strips. Sew the strips together end to end with a diagonal seam and cut two 2 ½” x 52 ½” strips. • Cut one 2 ½” x WOF strip. Sub-cut into 2 ½” x 12 ½” strips. • Cut five 2 ½” x WOF strips for the binding. Teal Vines (D) • Cut one 11” x WOF strip. Sub-cut eight 5” x 11” strips. Using the GO! Half Square Triangles - 4” finished die to cut thirty-two Large Border Triangles. • Cut one 6” square. Using the GO! Quarter Square Triangles - 4” die to cut four small Border Triangles. Note: You will only need two small Border Triangles. White Leaves (E) • Cut one 11” x WOF strip. Sub-cut eight 5” x 11” strips. Using the GO! Half Square Triangles - 4” finished die to cut thirty-two Large Border Triangles. • Cut one 6” x WOF strip. Sub-cut one 6” x 11” rectangle. Using the GO! Quarter Square Triangles - 4” die cut six small Border Triangles from the rectangle. Also cut four 4 ½” squares from the remaining 6” strip. White (F) • Cut two 10 ½” x WOF strips. Sub-cut sixteen 4 ½” x 10 ½” strips. Using the GO! Hunter Star - 6” finished die to cut sixteen Hunter Star sets Backing (Your Choice) • Cut one 68” x 32” piece for the backing
©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
Page 1
Early Blossoms
O-1/18/16
Assembly Instructions:
1. 2.
Sew one Fabric F-Short Trapezoid to each end of one Fabric A-Long Trapezoid to make one FA Unit (Fig. 1). Repeat to make sixteen FA Units total. Sew one Fabric A-Large Triangle to one FA Unit to make one Unit 1 triangle (Fig. 2). Repeat to make sixteen Unit 1 triangles total. Unit 1 make 16 make 16 F
F
A
A F Fig. 1
3. 4.
A Fig. 2
Sew one Fabric B-Short Trapezoid to each end of one Fabric F-Long Trapezoid to make one BF Unit (Fig. 3). Repeat to make sixteen BF Units total. Sew one Fabric F-Large Triangle to one BF Unit to make one Unit 2 triangle (Fig. 4). Repeat to make sixteen Unit 2 triangles total. Unit 2 make 16 make 16 B
B
F
F B Fig. 3
5.
F
F
B
Fig. 4
Sew together one Unit 1 triangle and one Unit 2 triangle to make one Unit 3 square (Fig. 5). Repeat to make sixteen Unit 3 squares total. Unit 3 make 16 B F F F A B A F Fig. 5
Page 2 ©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
Early Blossoms
O-1/18/16
6.
Sew together four Unit 3 squares to make one block (Fig. 6). Repeat to make four blocks total. make 4
Fig. 6
7. 8. 9.
Sew together one Fabric E-Large Triangle to one Fabric D triangle to make one ED Unit (Fig. 7). Repeat to make 32 ED units total for the outer border. Sew together three Fabric E small triangles and one Fabric D small triangle to make one border unit (Fig. 8). Repeat to make a second border unit.
make 32 E D Fig. 7
make 2 E E E D Fig. 8
Sew together four ED units to make one outer side border (Fig. 9). Repeat to make a second outer side border. make 2
Fig. 9
10.
Sew together two 4 ½” Fabric E squares, twelve ED units and one border unit to make the outer top border (Fig. 10). Repeat to make the outer bottom border. make 2
E
E
Fig. 10
Page 3 ©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
Early Blossoms
O-1/18/16
Runner Top Assembly Instructions: Refer to Runner Layout while assembling.
11. 12. 13. 14. 15. 16.
Sew together the four blocks to make the runner top. Sew one 2 ½” x 12 ½” Fabric C strip to each side of the runner top. Sew one 2 ½” x 52 ½” Fabric C strip to the top and bottom of the runner top. Sew one outer side border to each side of the runner top. Sew one outer top border and outer bottom borders to the runner top. Layer and quilt as desired. Sew the five 2 ½” x LOF Fabric C strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press. Bind as desired.
C
C
C
C
Runner Layout
Page 4 ©2016 All Rights Reserved The Whimsical Workshop, LLC Do not reproduce without written permission of The Whimsical Workshop, LLC
