ECP-ISO

ECP-ISO ECP ISOLATOR

The ECP Isolator is designed to isolate burglary devices from fire devices on the ECP bus, so that a trouble on the burglary side of the bus will not affect the operation of fire

devices. It can also be used in any system to prevent wire shorts or grounds from interfering with operation on another wired branch on the bus.

FEATURES • Helps to maintain the operation of near-side isolated equipment such as fire keypads and communicators in the event of shorts or grounds on the extended ECP bus.

• Required for commercial fire alarm systems installed as combination fire/burglary systems, or other high-security applications where isolation is required.

SPECIFICATIONS Power:

Mounting:

V1 Out (Red)

• Mount inside the control panel enclosure

V2 Out (Red) TO BURGLARY DEVICES

GND (Black-) G (Green) Y (Yellow)

Temperature:

1

2

3

4

Humidity:

G (Green)

Y (Yellow)

VISTA-32FBP VISTA-128FBP VISTA-250FBP FA1670C FA1700C

+12V In (Red)

• 32° F to 122° F (0º C to 50º C)

GND (Black)

TB2

Compatibility:

• 0-86% non-condensing Listings:

PANEL KEYPAD PORT 12

• 3" W x 2-3/4" H x 1" D

Product specifications subject to change.

G (Green)

• Listed to UL864 9th Edition

13

14

Y (Yellow)

Product Dimensions:

12V (Red +)

11

GND (Black -)

• • • • •

12VDC nominal

ECP ISOLATOR TB1 1 V1 Out (500ma) 2 V2 Out (500ma) 3 GND 4 G 5 Y

Y (Yellow) G (Green)

ORDERING

GND (Black -) 12V (Red +)

TO FIRE DEVICES ECPISO-001-V0

ECP-ISO

ECP Isolator

For more information: www.honeywell.com/security/hsc Automation and Control Solutions Honeywell Security & Communications 2 Corporate Center Dr. Suite 100 Melville, NY 11747 1.800.467.5875 www.honeywell.com

L/ECPISOD/D September 2009 © 2009 Honeywell International Inc.