electrical accessories
Goto to Main PDF Menu
ELECTRICAL ACCESSORIES
END CONNECTOR FOR 1⁄2" & 3⁄4" CONDUIT
P5021-50 P5021-75
END CONNECTOR FOR 1" CONDUIT
P2521-100
P5000
A
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Tapped for 1" Conduit Thread
⁄4" X 5⁄8" Flat Head
Machine Screw and P3016-1420 Nut Included
Nuts & Hardware
1
P1000 1 ⁄4" X 5⁄8" Flat Head Machine Screw and P3016-1420 Nut Included
1 5⁄8"
2 1⁄16" (52.4)
General Fittings
(41.3)
Material: 12 gage (2.7).
31 30
Material: 12 gage (2.7).
14.1 13.6
Wt/C 24 Lbs (10.9 kg)
END CONNECTOR FOR 1" CONDUIT
P5021-100
END CONNECTOR FOR 1" CONDUIT
P5521-100
Tapped for 1" Conduit Thread
Tapped for 1" Conduit Thread P5000
P5500
Material: 12 gage (2.7).
1 5⁄8" (41.3)
Material: 12 gage (2.7). Wt/C 24 Lbs (10.9 kg)
Wt/C 28 Lbs (12.7 kg)
P1180 W thru P5580 W
WIREWAY END CAPS
Part Number
Weight/C Lbs kg
P1100 P1000 P2000 P3000 P4000 P5000 P5500
12 11 11 15 5 22 18
5.4 5.0 5.0 6.8 2.3 10.0 8.2
Index
Material: .075" (1.9)
P1180 W P1280 W P2280 W P3280 W P4280 W P5280 W P5580 W
Use With
⁄ Framing
1 5⁄8" (41.3)
13 16"
⁄4" X ⁄8" Flat Head Machine Screw and P3016-1420 Nut Included
⁄4" X 5⁄8" Flat Head Machine Screw and P3016-1420 Nut Included
Spec. Metals & Fiberglass
5
Concrete Inserts
1 1
Pipe/Conduit Supports
⁄ 3⁄4
Electrical Fittings
12
P5021-50 P5021-75
Weight/C Lbs kg
11⁄4" Framing System
Conduit Size A In
System
Part Number
157
Return to #12 TOC
Return to Electrical TOC
Goto to Main PDF Menu
ELECTRICAL ACCESSORIES
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Page Electrical Fittings
Nuts & Hardware
Receptacles Fixture Hangers
General Fittings
Accessories and Connectors Junction Boxes
Swivel Hangers Cable Entrance Tubing and Accessories
153 154 155 159 160 161 162
MATERIAL Unistrut fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A570 GR 33. The pickling of the steel produces a smooth surface free from scale. Maple cable saddles, cable clamps and bus bar clamps are made from kiln-dry maple treated with paraffin to a depth of 1⁄16" (1.6mm). Special sizes of clamps can be fabricated upon request. Porcelain cable
clamps are made by the dry process and white glazed. Cable saddles are fiberglass-reinforced polyester. FINISHES Components listed in this section are available in: electro-galvanized (EG), conforming to ASTM B633 Type III SC1; Hot-dipped galvanized (HG), conforming to ASTM A123 or A153, Perma-Green II (GR), and plain (PL). Note: Many Unistrut Metal Framing components, when used with appropriate closures, are UL® listed, and CSA approved.
DESIGN LOAD Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted. DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place.
Index
Spec. Metals & Fiberglass
13⁄16"
Framing System
11⁄4" Framing System
Concrete Inserts
Electrical Fittings
Pipe/Conduit Supports
In-Channel Joiners
150
148
Return to #12 TOC
UNISTRUT
• \fi
Channel Selection
Channel Selection Chart
*
r
•»
Hole Pattc•rn Styles
Mater ial & Thick ness
Channe IDintensions Width Height
A
r Steel
Stainless Steel
///
Alum.
h Alum.
Width
Height
Channel
In (mm)
In (mmj
Steel gauge
Stainless gauge
In (mm)
P1000
1 /8
15/.
12 ga
12 ga
0.109
41
41
P1100 P2000 P3000
5
5
5
1 /e
1 /8
41
£|
P4100
47
16 ga
—
—
15/8
1%
12 ga
—
—
35 7 /a 22
12 ga
12 ga
—
16 ga
16 ga
1% '
/16
14 ga
—
0.078 2.0 —
27 3V83
12 ga
—
—
1 /8
27/16
12 ga
—
0.109
41
62
1% 41
13
15/e
13
/16
27
41
P5000
5
1 /8
41
P5500
—
1S/8
5
41
P4000
14 ga
14 ga
41
1 /8
41
P3300
2.8
5
2.8
HS
KO
T
SL
DS
H3
•
•
-
—
-
—
-
—
-
—
-
-
-
—
-
-
—
—
Steel Inly
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
• • •
Channels & Combinations in Descending Order of Strength Area Channel P5001 P1004A P5501 P1001C41 P5000 P1001 P1101
P3001 P5500 P2001 P9200 A5000 A1001
P3301 P1000 P9000
Weight 1
s
Allow. Moment In-lbs (tton)
In2 (cnf) Ibs/ft (kg/m) In4 (cm4) lif(aif) 1.794 11.6 1.978 12.8 1.453 9.4 2.223 74.3 0.897 5.8 1.112 7.2 0.834 5.4 1.007 6.5 0.726 4.7 0.681 4.4 0.489 3.2 0.492 3.2 0.610 3.9 0.797 5.7 0.556 3.6 0.384 2.5
6.10 9.1 6.70 70.0 4.94 7.4 7.60 77.2 3.05 4.5 3.80 5.6 2.84 4.2 3.40 5.7 2.47 3.7 2.32 3.4 2.23 3.3 1.67 2.5 2.08 3.7 2.70 4.0 1.90 2.8 2.05 3.1
5.578 232.2 4.079 169.8 2.811 117.0 1.860 77.4 1.099 45.7 0.930 38.7 0.741 30.8 0.593 24.7 0.523 21.8 0.616 25.6 0.278 11.6 0.359 14.9 0.303 72. 6 0.177 7.4 0.185 7.7 0.164 6.8
1.716 28.1 1.673 27.4 1.153 18.9 1.145 18.8 0.628 70.3 0.572 9.4 0.456 7.5 0.431
7.r
0.391 6.4 0.379 6.2 0.297 4.9 0.266 4.4 0.242 4.0 0.202 3.3 0.202 3.3
0.203 3.3
33,909 3.831 42,075 4.754 28,998 3,276 28,796 3,254 15,794 1,784 14,386 7.625 11,468 7,296 10,840 1.225 9,834 1.111 9,532 7,077 7,470 844 6,690 756 6,086 688 5.080 574 5,080 574 5,060 572
Channel
Area In2 (cnf)
Weight 1 Ibs/ft (kg/m) In4 (cm')
P1100
0.417 2.7
1.42 2.7
P3000
0.503 3.2 0.574 3.7 0.340 2.2 0.478 3.1 0.460 3.0 0.305 2.0 0.398 2.6 0.211 1.4 0.287 1.9 0.245 1.6 0.239 1.5 0.230 7.5 0.105 0.7 0.123 0.8 0.146 0.9 0.073 0.5
1.70 2.5 1.94 2.9
P4101
P2000 P4001 A3301 A1000 P3300 P6001 P4100 A4001 P4000 A3300 P6000 A4000 P7001 P7000
1.16 1.7 1.64 2.4 1.56 2.3 1.04 1.5 1.35 2.0 0.72 1.1 0.97
r.5
0.90 1.2 0.82 1.2 0.78 7.2 0.36 0.5 0.45 0.6 0.50 0.7 0.25 0.4
0.149 6.2 0.121 5.0 0.114 4.7 0.124 5.2 0.101 4.2 0.078 3.2 0.061 2.5 0.037 1.5 0.044 1.8
0.025 1.0 0.031 1.3 0.023 1.0 0.017 0.7 0.009 0.4 0.007 0.3 0.007 0.3 0.002 0.1
s Allow. Moment \i?(enf) In-lbs (N*m) 0.166 2.7 0.154 2.5 0.141 2.3 0.140 2.3 0.125 2.0 0.103 17 0.086 1.4
0.072 1.2 0.054 0.9 0.053 0.9 0.049 0.8 0.048 0.8 0.038 0.6 0.020 0.3 0.019 0.3 . 0.017 0.3 0.007 0.1
4,175 472 3,873 438 3,546 401 3,521 398 3,144 355 2,590 233 2,163 244 1,811 205 1,358 753 1,333 757 1,232 739 1,207 736 956 108 503 57 478 54 428 48 176 20
15/s" Framing System
ELECTRICAL ACCESSORIES
END CONNECTOR FOR 1⁄2" & 3⁄4" CONDUIT
P5021-50 P5021-75
END CONNECTOR FOR 1" CONDUIT
P2521-100
P5000
A
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Tapped for 1" Conduit Thread
⁄4" X 5⁄8" Flat Head
Machine Screw and P3016-1420 Nut Included
Nuts & Hardware
1
P1000 1 ⁄4" X 5⁄8" Flat Head Machine Screw and P3016-1420 Nut Included
1 5⁄8"
2 1⁄16" (52.4)
General Fittings
(41.3)
Material: 12 gage (2.7).
31 30
Material: 12 gage (2.7).
14.1 13.6
Wt/C 24 Lbs (10.9 kg)
END CONNECTOR FOR 1" CONDUIT
P5021-100
END CONNECTOR FOR 1" CONDUIT
P5521-100
Tapped for 1" Conduit Thread
Tapped for 1" Conduit Thread P5000
P5500
Material: 12 gage (2.7).
1 5⁄8" (41.3)
Material: 12 gage (2.7). Wt/C 24 Lbs (10.9 kg)
Wt/C 28 Lbs (12.7 kg)
P1180 W thru P5580 W
WIREWAY END CAPS
Part Number
Weight/C Lbs kg
P1100 P1000 P2000 P3000 P4000 P5000 P5500
12 11 11 15 5 22 18
5.4 5.0 5.0 6.8 2.3 10.0 8.2
Index
Material: .075" (1.9)
P1180 W P1280 W P2280 W P3280 W P4280 W P5280 W P5580 W
Use With
⁄ Framing
1 5⁄8" (41.3)
13 16"
⁄4" X ⁄8" Flat Head Machine Screw and P3016-1420 Nut Included
⁄4" X 5⁄8" Flat Head Machine Screw and P3016-1420 Nut Included
Spec. Metals & Fiberglass
5
Concrete Inserts
1 1
Pipe/Conduit Supports
⁄ 3⁄4
Electrical Fittings
12
P5021-50 P5021-75
Weight/C Lbs kg
11⁄4" Framing System
Conduit Size A In
System
Part Number
157
Return to #12 TOC
Return to Electrical TOC
Goto to Main PDF Menu
ELECTRICAL ACCESSORIES
1 5/8" Channels
FOR 15⁄8" (41 MM) WIDTH SERIES CHANNEL
Page Electrical Fittings
Nuts & Hardware
Receptacles Fixture Hangers
General Fittings
Accessories and Connectors Junction Boxes
Swivel Hangers Cable Entrance Tubing and Accessories
153 154 155 159 160 161 162
MATERIAL Unistrut fittings, unless noted, are made from hot-rolled, pickled and oiled steel plates, strip or coil, and conform to ASTM specifications A575, A576, A635, or A36. The fitting steel also meets the physical requirements of ASTM A570 GR 33. The pickling of the steel produces a smooth surface free from scale. Maple cable saddles, cable clamps and bus bar clamps are made from kiln-dry maple treated with paraffin to a depth of 1⁄16" (1.6mm). Special sizes of clamps can be fabricated upon request. Porcelain cable
clamps are made by the dry process and white glazed. Cable saddles are fiberglass-reinforced polyester. FINISHES Components listed in this section are available in: electro-galvanized (EG), conforming to ASTM B633 Type III SC1; Hot-dipped galvanized (HG), conforming to ASTM A123 or A153, Perma-Green II (GR), and plain (PL). Note: Many Unistrut Metal Framing components, when used with appropriate closures, are UL® listed, and CSA approved.
DESIGN LOAD Design load data, where shown, is based on the ultimate strength of the connection with a safety factor of 2.5, unless otherwise noted. DIMENSIONS Imperial dimensions are illustrated in inches. Metric dimensions are shown in parenthesis or as noted. Unless noted, all metric dimensions are in millimeters and rounded to one decimal place.
Index
Spec. Metals & Fiberglass
13⁄16"
Framing System
11⁄4" Framing System
Concrete Inserts
Electrical Fittings
Pipe/Conduit Supports
In-Channel Joiners
150
148
Return to #12 TOC
UNISTRUT
• \fi
Channel Selection
Channel Selection Chart
*
r
•»
Hole Pattc•rn Styles
Mater ial & Thick ness
Channe IDintensions Width Height
A
r Steel
Stainless Steel
///
Alum.
h Alum.
Width
Height
Channel
In (mm)
In (mmj
Steel gauge
Stainless gauge
In (mm)
P1000
1 /8
15/.
12 ga
12 ga
0.109
41
41
P1100 P2000 P3000
5
5
5
1 /e
1 /8
41
£|
P4100
47
16 ga
—
—
15/8
1%
12 ga
—
—
35 7 /a 22
12 ga
12 ga
—
16 ga
16 ga
1% '
/16
14 ga
—
0.078 2.0 —
27 3V83
12 ga
—
—
1 /8
27/16
12 ga
—
0.109
41
62
1% 41
13
15/e
13
/16
27
41
P5000
5
1 /8
41
P5500
—
1S/8
5
41
P4000
14 ga
14 ga
41
1 /8
41
P3300
2.8
5
2.8
HS
KO
T
SL
DS
H3
•
•
-
—
-
—
-
—
-
—
-
-
-
—
-
-
—
—
Steel Inly
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
• • •
Channels & Combinations in Descending Order of Strength Area Channel P5001 P1004A P5501 P1001C41 P5000 P1001 P1101
P3001 P5500 P2001 P9200 A5000 A1001
P3301 P1000 P9000
Weight 1
s
Allow. Moment In-lbs (tton)
In2 (cnf) Ibs/ft (kg/m) In4 (cm4) lif(aif) 1.794 11.6 1.978 12.8 1.453 9.4 2.223 74.3 0.897 5.8 1.112 7.2 0.834 5.4 1.007 6.5 0.726 4.7 0.681 4.4 0.489 3.2 0.492 3.2 0.610 3.9 0.797 5.7 0.556 3.6 0.384 2.5
6.10 9.1 6.70 70.0 4.94 7.4 7.60 77.2 3.05 4.5 3.80 5.6 2.84 4.2 3.40 5.7 2.47 3.7 2.32 3.4 2.23 3.3 1.67 2.5 2.08 3.7 2.70 4.0 1.90 2.8 2.05 3.1
5.578 232.2 4.079 169.8 2.811 117.0 1.860 77.4 1.099 45.7 0.930 38.7 0.741 30.8 0.593 24.7 0.523 21.8 0.616 25.6 0.278 11.6 0.359 14.9 0.303 72. 6 0.177 7.4 0.185 7.7 0.164 6.8
1.716 28.1 1.673 27.4 1.153 18.9 1.145 18.8 0.628 70.3 0.572 9.4 0.456 7.5 0.431
7.r
0.391 6.4 0.379 6.2 0.297 4.9 0.266 4.4 0.242 4.0 0.202 3.3 0.202 3.3
0.203 3.3
33,909 3.831 42,075 4.754 28,998 3,276 28,796 3,254 15,794 1,784 14,386 7.625 11,468 7,296 10,840 1.225 9,834 1.111 9,532 7,077 7,470 844 6,690 756 6,086 688 5.080 574 5,080 574 5,060 572
Channel
Area In2 (cnf)
Weight 1 Ibs/ft (kg/m) In4 (cm')
P1100
0.417 2.7
1.42 2.7
P3000
0.503 3.2 0.574 3.7 0.340 2.2 0.478 3.1 0.460 3.0 0.305 2.0 0.398 2.6 0.211 1.4 0.287 1.9 0.245 1.6 0.239 1.5 0.230 7.5 0.105 0.7 0.123 0.8 0.146 0.9 0.073 0.5
1.70 2.5 1.94 2.9
P4101
P2000 P4001 A3301 A1000 P3300 P6001 P4100 A4001 P4000 A3300 P6000 A4000 P7001 P7000
1.16 1.7 1.64 2.4 1.56 2.3 1.04 1.5 1.35 2.0 0.72 1.1 0.97
r.5
0.90 1.2 0.82 1.2 0.78 7.2 0.36 0.5 0.45 0.6 0.50 0.7 0.25 0.4
0.149 6.2 0.121 5.0 0.114 4.7 0.124 5.2 0.101 4.2 0.078 3.2 0.061 2.5 0.037 1.5 0.044 1.8
0.025 1.0 0.031 1.3 0.023 1.0 0.017 0.7 0.009 0.4 0.007 0.3 0.007 0.3 0.002 0.1
s Allow. Moment \i?(enf) In-lbs (N*m) 0.166 2.7 0.154 2.5 0.141 2.3 0.140 2.3 0.125 2.0 0.103 17 0.086 1.4
0.072 1.2 0.054 0.9 0.053 0.9 0.049 0.8 0.048 0.8 0.038 0.6 0.020 0.3 0.019 0.3 . 0.017 0.3 0.007 0.1
4,175 472 3,873 438 3,546 401 3,521 398 3,144 355 2,590 233 2,163 244 1,811 205 1,358 753 1,333 757 1,232 739 1,207 736 956 108 503 57 478 54 428 48 176 20
15/s" Framing System
