ELECTRICAL SYSTEMS SUBMITTAL
4-color white R
White + 50% black
All white
Spring Steel Fasteners
ELECTRICAL SYSTEMS SUBMITTAL A Submittal Guide for Spring Steel Fastening Applications
1
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
TABLE OF CONTENTS American Made. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 LEED Credits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spring Steel - Black Claw
Conduit/Cable Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Beam/Purlin Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Metal Stud Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Strut Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Rod Hangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Acoustical/Ceiling Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Low-voltage/Misc. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
BUY AMERICAN ACT
The American Recovery and Reinvestment Act of 2009 requires that all construction materials for federal, state and local stimulus projects must be manufactured in the United States. Ramset is unique in the world of construction tools, fasteners and sealant manufacturing. Overall, 98% of Ramset fasteners and accessories are made in the USA. Unlike our competitors you know you are buying American made products and supporting the American economy and workers when you buy Ramset. Ramset’s parent company, Illinois Tool Works (NYSE: ITW) employees more than 25,000 Americans.
Manufacturer
Tools
3
Fasteners
Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL
Paris, KY Itasca, IL Paris, KY Paris, KY Paris, KY Paris, KY Paris, KY
Hilti
Austria
Liechtenstein/ China
Powers
Japan/ China
China
Tyrex
Taiwan
China
Simpson
China
China
St Louis, MO Pontotoc, MS
Sealant Manufacturing Spring Steel Manufacturing Wedge Anchors and LDT Anchors Manufacturing Tapcon Manufacturing
Rockland, MA Addison, IL Michigan City, IN Itasca, IL
EZ Anchor Manufacturing
Elk Grove Village, IL
ELECTRICAL SUBMITTAL
SEC. 1605
iron, steel, l, and American iron, stee ed in —Use of uc usion of SEC. 1605 tured goods. (3) incl red goods prod se the ufac increa opriated ufactu pr ill an and man w ap m e s e fund d States t by mor th te by ec ni of e U oj e bl the all pr (a) Non e made availa t the over is a projec cost of t. en or otherw ay be used for rc pe m l teration, than 25 this Act a Federa ines ction, al a public constru e head of term for the repair of l (c) If th t or agency de ance, or work unless al en aive the rtm w pa to mainten ic y de bl ufacor pu necessar (a) and man ect are building that it is n of subsection bsection n, steel, oj su io of the iro s used in the pr es. applicat finding under ent at od sed on a of the departm tured go in the United St ba the head t apply produced (b), the shall publish in written ) shall no ses (a d n cy ile tio en ca ec or ag r a deta provision (b) Subs tegory of deral Registe e se or ca Fe Federal n as to why th in any ca e head of the tio th volved justifica aived. in which t or agency in w g ied in en is be l be appl ted al departm sh n ld at— sectio ith Uni (a) wou finds th (d) This r consistent w rnabsection te ne su in ic an r bl ng yi pu unde in a m (1) appl with the ligations nsistent States ob ements. be inco agre ican l er na m ; st nt tio “A leva intere HR 1, 2009”, d the re t t Act of ed from steel, an no *Excerpt d Reinvestmen 05 an (2) iron, red goods are ction 16 Recovery ates in tu XVI, Se manufac in the United St ailable n A, Title sio vi Di av produced and reasonably ory t ct sufficien and of a satisfa s quantitie or quality;
Ramset Tools: TrakFast GypFast T3SS T3Mag Rocket Rocketmag D45A
Ramset Manufacturing: Powder Loads Manufacturing Gas Fuel Cells Production
T
AN AC
MERIC
BUY A
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
April 22, 2009 To Whom It May Concern: This letter is to certify that the following Minerallac and Ramset products are manufactured and/or assembled in the United States of America: Manufactured in Addison, IL and South Holland, IL, and components assembled in Hampshire, IL: • KC1234, KC1234T • RF series • HIC50, HIC75 • PSF series • FSBX, FS1, FS2 FS3, FS4, APS • SCT3 • All BC series accessories • TB and TS series • All SFC series accessories • TBAR • 500 series • FT • FH series • BXC • R18 and R516 series The following Ramset spring steel products are manufactured in Franklin Park, IL: • L1710 • L1801 The following Minerallac products are manufactured and assembled in the United States of America: • FBO series • 600 series • DLS1 • A0600B, A1600B, A2600B • PH series • BBC • RA series • 646 and 648 series • SB series • WBF1 • SS • J200 • BMB series The following Ramset products are manufactured in Franklin Park, IL: • 120CF The following Minerallac products are assembled in the United States of America: • 701, 702, 703 - Raw castings from Germany; tapping, plating & assembly occurs domestically. For further information or any questions please contact Tom Colangelo at Ramset. Tom Colangelo Electrical Marketing Manager 630-694-4675
4
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
LEED CREDITS
What is LEED
The purpose of Leadership in Energy and Environmental Design (LEED) is to construct buildings in an energy efficient manner and reduce the buildings’ energy consumption. As a result, these buildings can help conserve non-renewable energy resources; decrease dependence on foreign oil; and lower greenhouse gas emissions.
Ramset LEED Credit EQ 4.1
EQ 4.1 was developed with the intent to reduce the quality of indoor air contaminants that are odorous, irritating, and/or harmful to the comfort and well being of installers and occupants.
Ramset’s SC200 sound control sealant meets LEED EQ credit 4.1 for low emitting VOC materials and earns 1 LEED point.
Ramset LEED Credit MR 5.1
MR 5.1 was developed with the intent to increase demand for building materials and products that are extracted and manufactured within the region, thereby supporting the use of indigenous resources and reducing the environmental impact resulting from transportation. Ramset’s pins, sealants, spring steel products, electrical accessories and anchors may meet the requirements for LEED MR 5.1 if your project falls within 500 miles of our manufacturing facilities.
Rockland, MA (02370) Sealant Addison, IL (60101) Spring Steel Elk Grove Village, IL (60007) EZ Anchor Itasca, IL (60143)Tapcon/GypFast & Fasteners
Michigan City, IN (46360) Wedge Anchors LDT Anchors Paris, KY (40361) Powder & Gas Fasteners
How to calculate LEED MR 5.1
LEED MR Credit 5.1 is calculated on a 500 mile radius from/to distribution points. Use Google Maps to calculate the distance to your project from:
5
Location
Zip Code Product
Addison, IL
60101
Spring Steel
Elk Grove Village, IL 60007
EZ Anchor
Itasca, IL
60143
Tapcon/GypFast & Fasteners
Michigan City, IN
46360
Wedge & LDT Anchors
Rockland, MA
02370
Sealant
Paris, KY
40361
Powder & Gas Fasteners
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
conduit/cable SuPPoRt • Supports conduit and all types of cable from rods or flanges • Note: FSBX bat wings are designed for positioning only; no Vertical Vertical load rating Vertical Flange Flange Flange
FXBX
FS2 Vertical Vertical Vertical Wire or Rod Wire oror Rod Wire Rod
25lbs 25 LBS LBS 2525 LBS
50 LBS 50lbs 50 LBS 50 LBS
Horizontal Horizontal Horizontal Flange Flange Flange
Ramset #
Description
FSBX FS1 FS2 FS3 FS4
bat wing support clip MC, AC OR BX and #12 to #8 wire 1/2" bat wing 2-c 3/4" bat wing 1" bat wing 1 1/4" bat wing
Description fits 1/8" to 3/8" flanges threaded for 1/4"–20
Pkg Qty
Ramset #
Description
APSKC1234
latching conduit clamp 1/2"–3/4"
• Available both non-keyholed and keyholed for 1/4"–20 screw
Pkg Qty 100
Ramset # Description
25lbs KC1234T
25 25LBS LBS
HIC75
15lbs Lbs 1515 Lbs
• No fastener required • Designed to quickly secure one conduit run to another
Pkg Qty
KC38 3/8" conduit clamp with thread impression for 1/4"–20 stud KC1234 1/2" and 3/4" conduit clamp KC1234T 1/2" and 3/4" conduit clamp with thread impression for 1/4"–20 stud
100lbs
100 100LBS LBS
100 100 100
Holding values are for accessories and do not include anchoring method.
• Available both non-keyholed and keyholed for 1/4"–20 screw • Ultimate static load limit: 25lbs vertical; 15lbs horizontal
100
25 LBS
50 LBS
25 LBS
• Attaches conduit to flanges, wire or rod
• No fastener required
Ramset # APS 50lbs
25lbs 50 LBS
• Ultimate static load limit: 100lbs vertical; 25lbs horizontal
100 100 100 100 100
1-c
100lbs 100 LBS 100 100 LBS LBS
• Attaches conduit or boxes to flanges, wire or rod • Fits 1/8" to 3/8" flanges; attaches to #12 wire through 3/8" rod; attaches #10–24 or 1/4"–20 threaded Bridle Rings (position only)
Pkg Qty
25lbs 25 25 LbsLbs
Ramset #
Description
HIC50 HIC75
1/2" snap into place EMT 3/4" snap into place EMT
Pkg Qty 100 100
Holding values are for accessories and do not include anchoring method.
Ramset #
Description
HIC7575
3/4" to 3/4" conduit
Pkg Qty 100
• Ultimate Static Load Limit: 25lbs • Note: top conduit to be used for support only, not a raceway
6
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
conduit/cable Side Mount Flange Push Clip • Suspends conduit from bottom of beam • Will pivot 360 degrees • Installs with hammer only
SFC1875
15lbs
Ramset #
Description
SFC1875 SFC18100
3/4" conduit side mount for 1/8" to 1/4" 2-cflange 1" conduit side mount for 1/8" to 1/4" flange
Static Load Pkg Qty 15lbs 15lbs
100 100
15 Lbs
Side Mount Flange Latch Clip • Suspends conduit from side of beam • Will pivot 360 degrees • Installs with hammer only
SFC516KC1
25lbs 25 LBS
Ramset #
Description
SFC18KC1234 SFC18KC1 SFC18KC114 SFC18KC2 SFC516KC1234 SFC516KC1 SFC516KC114 SFC516KC112 SFC916KC38 SFC916KC1234 SFC916KC1
1/2" to 3/4" conduit side mount for 1/8" to 1/4" flange 1" conduit side mount for 1/8" to 1/4" flange 1 1/4" conduit side mount for 1/8" to 1/4" flange 2" conduit side mount for 1/8" to 1/4" flange 1/2" to 3/4" conduit side mount for 5/16" to 1/2" flange 1" conduit side mount for 5/16" to 1/2" flange 1 1/4" conduit side mount for 5/16" to 1/2" flange 1 1/2" conduit side mount for 5/16" to 1/2" flange 3/8" conduit side mount for 9/16" to 3/4" flange 1/2" to 3/4" conduit side mount for 9/16" to 3/4" flange 1" conduit side mount for 9/16" to 3/4" flange
Static Load Pkg Qty
1-c
25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs
100 100 100 100 100 100 100 100 100 100 100
Holding values are for accessories and do not include anchoring method. Bottom Flange Push Clip • Suspends conduit from bottom of beam • Will pivot 360 degrees • Installs with hammer only
BC1875
25lbs 25 Lbs
Ramset #
Description
BC1850 BC1875
1/2" conduit bottom mount for 1/8" to 1/4" flange 3/4" conduit bottom mount for 1/8" to 1/4" flange
Static Load Pkg Qty 25lbs 25lbs
100 100
Holding values are for accessories and do not include anchoring method. Bottom Flange Latch Clip
• Suspends conduit from bottom of beam • Will pivot 360 degrees • Installs with hammer only
75lbs
BC516KC1
75 LBS
Ramset #
Description
Static Load Pkg Qty
BC18KC38 BC18KC1234 BC18KC1 BC18KC114 BC516KC38 BC516KC1234 BC516KC1 BC516KC114 BC516KC112 BC516KC2 BC916KC38 BC916KC1234
3/8" conduit bottom mount for 1/8" to 1/4" flange 1/2" to 3/4" conduit bottom mount for 1/8" to 1/4" flange 1" conduit bottom mount for 1/8" to 1/4" flange 1 1/4" conduit bottom mount for 1/8" to 1/4" flange 3/8" conduit bottom mount for 5/16" to 1/2" flange 1/2" to 3/4" conduit bottom mount for 5/16" to 1/2" flange 1" conduit bottom mount for 5/16" to 1/2" flange 1 1/4" conduit bottom mount for 5/16" to 1/2" flange 1 1/2" conduit bottom mount for 5/16" to 1/2" flange 2" conduit bottom mount for 5/16" to 1/2" flange 3/8" conduit bottom mount for 9/16" to 3/4" flange 1/2" to 3/4" conduit bottom mount for 9/16" to 3/4" flange
75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs
100 100 100 100 100 100 100 100 100 100 100 100
Holding values are for accessories and do not include anchoring method.
• Secures conduit and electrical boxes to most structures • Provides conduit support on both sides of electrical box • With hole for screw or threaded rod mount or with 1/4”–20 x 5/8” stud
7
ELECTRICAL SUBMITTAL
CBS18KC1234
CBS18KC1234
Ramset #
Description
CBS18KC1234 CBS18KC1234ST CBS18KC38
conduit box support for 1/2"-3/4" conduit, has “star” hole for 1/4"–20 conduit box support for 1/2"-3/4" conduit with 1/4"–20 stud conduit box support for 3/8" conduit with 1/4"–20 stud
Pkg Qty 25 25 25
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
beam/PuRlin • Fast installation; fits beam flange to 1/2" • Used with 1/4" and 3/8" threaded rod, "S" hooks, conduit hangers, electrical boxes, and #10–24 or 1/4"-20 bridle rings •• Fast fits 100lbs beam flange Staticinstallation; load capacity: to 1/2"
Ramset #
Description
500
beam clamp up to 1/2" flange – 1/4" to 3/8" threaded rod
Pkg Qty 4-c 2-c
beam/PuRlin
• Used with 1/4" and 3/8" threaded • Used with conduit hangers #0 to rod, "S" hooks, conduit hangers, #5, bridleboxes, rings and rod electrical andthreaded #10–24 or 1/4"-20 bridle rings • Case hardened steel set screw tappedload at ancapacity: angle, locks on beam • Static 100lbs • Zinc plated steel or stainless steel
600
Ramset #
Description
500
beam clamp up to 1/2" flange – 1/4" to 3/8" threaded rod
Ramset #
Description
600 602 602B
1/2" universal beam clamp 1/4"–20 1-c 3/4" universal beam clamp – 3/8" bottom only 3/4" universal beam clamp 3/8"–16 flange; 3/8" rod
100
Pkg Qty 100 Pkg Qty
2-c
50 25 25
4-c
beam/PuRlin
• UsedLoad with conduit #0 to Ramset # Description Pkg Qty Ratingshangers for Minerallac 600 & 60010 (Bottom Hole Only) #5, bridle rings and threaded rod Partbeam No. clamp 1/4"–20 Static Load Limit*Pkg50Qty Static Load 600 Limit* • UsedPart with No. conduit hangers, bridle 1/2" universal 1-c Ramset # Description •• Fast installation; fits beam Case hardened set rings600 and drop steel rods, 3/8"screw toflange 1/2" Ramset # Description Pkg Qty 75 lbs.700 602 602 3/4" flange universal beam clamp 3/8" bottom only tapped bottom and back 200 lbs. 25 1/2" malleable beam –clamp for 1/4"–20; 50 to 1/2" at an angle, locks on beam tapped 602B 200 lbs. 60010 75 lbs. • tapped for rods bottom and back 500 beam clamp up to 1/2" flange – 1/4" to 3/8" threaded rod 100 602B 3/4" universal beam clamp 3/8"–16 flange; 3/8" rod 25 701 3/4" flange malleable beam clamp for 5/16"–18 25 Used with threaded •• Zinc steeland or 3/8" stainless steel 600 on allplated sizes1/4" Load Ratings for clamp Minerallac 602 & 602B (Bottom Hole Only) 2-c 702 3/4" flange malleable beam for 3/8"–16 25 rod, "S" hooks, conduit hangers, 700 • Malleable zinc plated steel or electrical boxes, and #10–24 703 7/8" flange malleable beam clamp for 1/2"–13 25 1/4"-20 bridle ringshangers, bridle • Used with conduit Ramset # Description Pkg Qty rings and rods, 100lbs 3/8" to 1/2" • Static loaddrop capacity: 700 1/2" flange malleable beam clamp for 1/4"–20; tapped bottom and back 50 •• Can be used to suspend boxes, tapped for rods bottom and back Ramset # malleable Description Pkg25Qty 701 3/4" flange beam clamp for 5/16"–18 fixtures and bridle rings to beam on all sizes • Used with BC18 1/8" tobeam 1/4" flange clamp with 1/4"–20 thread 100 702 3/4" flange malleable clampbeam for 3/8"–16 25Qty Ramset # Description Pkg flanges 1/8"conduit to 3/4"hangers thick #0 to 700 • Malleable steel rod #5, bridle zinc ringsplated and threaded BC18ST 1/8" to 1/4" flange with 1/4"–20 x 3/8" staked stud 100 703 7/8" flange malleable beam clamp for 1/2"–13 25 600 1/2" universal beam clamp 1/4"–20 50 1-c • Beam clamp with 1.4"–20 x 3/8" • Case steel set screwbox BC18 BC516 5/16" to 1/2" flange beam clamp with 1/4"–20 thread 100 stakedhardened stud used to suspend 602 3/4" universal beam clamp – 3/8" bottom only 25 Load forlocks Minerallac tapped atRatings an angle, on beam700 Series (Bottom Hole Only) from bottom of beam BC516ST 5/16" clamp to 1/2"3/8"–16 flange with 1/4"3/8" to 20 100 602B 3/4" universal beam flange; rodx 3/8" staked stud 25 600 Part No. Static Load Limit* •• Can be used toload suspend Zinc plated steel or stainless steel BC916 9/16" to 3/4" flange beam clamp with 1/4"–20 thread 100 Ultimate static limit:boxes, 75lbs or Ramset # Description Pkg Qty 700 and bridle rings to beam 275 lbs. fixtures 100lbs Holding values are for accessories and do not include anchoring method. BC18 1/8" to 1/4" flange beam clamp with 1/4"–20 thread 100 flanges 1/8" to 3/4" thick 70010 275 lbs. 100lbs 75lbs • Note: static load limits cannot be BC18ST 100Qty •• Used with conduit hangers,x 3/8" bridle BC18ST 701 525 lbs.Ramset # Beam clamp with 1.4"–20 Description 1/8" to 1/4" flange with 1/4"–20 x 3/8" staked stud Pkg combined 75 Lbs 100 Lbs rings and drop rods, 3/8" to 1/2" BC516 5/16" to 1/2" flange beam clamp with 1/4"–20 thread 100 staked stud used to suspend box BC18 702 750 lbs.700 1/2" flange malleable beam clamp for 1/4"–20; tapped bottom and back 50 from bottom of beam BC516ST 5/16" to 1/2" flange with 1/4" to 20 x 3/8" staked stud 100 • tapped for rods bottom and back 703 900 lbs.701 3/4" flange malleable beam clamp for 5/16"–18 25 on all sizes BC916 9/16" to 3/4" flange beam clamp with 1/4"–20 thread 100Qty • offered Ultimate static limit:nut 75lbs with orload without and or Ramset # Description Pkg 702 3/4" flange malleable beam clamp for 3/8"–16 25 700 100lbs attached • bolt Malleable zinc plated *Static Load Limitsteel - is a rated stationary load limit. Minerallac's standards require test load equal to three times this load rating (Safety Factor of three). Holding values are for accessories and do not include anchoring method. 703 7/8"a flange malleable beam clamp for 1/2"–13 25 A0600B 1/2" EMT, 3/8" to 1/2" Rigid, beam clamp to conduit hanger 100 75lbs 100lbs Note:plated static steel load limits cannot be • Zinc A1600B 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger 100 BC18ST combined 75 Lbs 100 Lbs A2600B 1" EMT, 1" Rigid, beam clamp to conduit hanger 100 • Can be used to suspend boxes, A0600B Ramset # Description Pkg Qty fixtures and bridle rings to beam • offered with to or 3/4" without BC18 100Qty Ramset # Description 1/8" to 1/4" flange beam clamp with 1/4"–20 thread Pkg flanges 1/8" thicknut and • Static load capacity: 100lbs bolt attached Ramset # Description Pkg BC18ST 1/8" to Rigid, 1/4" flange with 1/4"–20 x 3/8"hanger staked stud 100Qty A0600B 1/2" EMT, 3/8" to 1/2" beam clamp to conduit 100 • vertical, Beam clamp with 1.4"–20 x 3/8" 25lbs horizontal • Zinc plated steel 500KC1234 1/2" and 3/4" beam clamp to conduit – vertical 100 BC516 5/16" to 1/2" flange beam clamp with 1/4"–20 thread staked stud used to suspend box BC18 A1600B 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger 100 from bottom of beam 500KC1234B BC516ST 1/2" and1"3/4" beam clamp toflange conduit – horizontal 100 5/16" to 1/2" with 1/4" to 20 x 3/8" staked stud A2600B 1" EMT, Rigid, beam clamp to conduit hanger 100 • Ultimate static load limit: 75lbs or A0600B 100lbs 500KC1234 •• Static 100lbs Note: load staticcapacity: load limits cannot be horizontalon bulb combined • vertical, Installed25lbs with hammer tees and beams with static load capacity of 200lbs •• offered with without Clearance foror1/4" bolt innut taband bolt attached • Zinc plated steel • Installed with hammer on bulb and beams static load • tees Installed withoutwith power tools capacity of 200lbs • Compensates for angle of purlin • Clearance for 1/4" bolt in tab ••Static Staticload loadcapacity: capacity:100lbs 100lbs vertical, 25lbs horizontal
BC18ST
500KC1234 SFC18
A0600B SFC18 PH
ELECTRICAL • Installed8 without power toolsSUBMITTAL • Compensates for angle of purlin • StaticPH14T load capacity: 100lbs
500KC1234 PKC1234
BC916
9/16" to 3/4" flange beam clamp with 1/4"–20 thread
Holding values are for accessories and do not include anchoring method. 100lbs Ramset # Description 75 Lbs 100 Lbs # Ramset Description 500KC1234 1/2" and 3/4" beam clamp to conduit – vertical SFC18 1/8" and to 1/4" 500KC1234B 1/2" 3/4"flange beambeam clampclamp to conduit – horizontal SFC516 5/16" to 1/2" flange beam clamp Ramset # Description SFC916 9/16" to 3/4" flange beam clamp A0600B 1/2" EMT, 3/8" to 1/2" Rigid, beam clamp to conduit hanger A1600B 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger Ramset # Description A2600B 1" EMT, 1" Rigid, beam clamp to conduit hanger Ramset # Description SFC18 1/8" to 1/4" flange beam clamp SFC516 5/16" to 1/2" beam clamp PH Z-Purlin withflange 1/4" bottom hole SFC916 9/16" to 3/4" flange beam clamp PH14T Z-Purlin for 1/4" threaded rod Ramset # Description
75lbs
PH38T 500KC1234 PKC1234 500KC1234B Ramset #
Z-Purlin for 3/8" threaded rodconduit – vertical 1/2" and 3/4" beam clamp to 1/2" or 3/4" conduit to Z-Purlin 1/2" and 3/4" beam clamp to conduit – horizontal Description
PH PH14T
Z-Purlin with 1/4" bottom hole Z-Purlin for 1/4" threaded rod
100
Pkg Qty Pkg 100Qty 100 100 Pkg Qty 100 100 100 Pkg Qty 100 Pkg 100Qty 100 100 100 100 Pkg Qty
100 100 ITW Ramset 100 100 1.800.RAMSET6 (1.800.726.7386) Pkg Qty www.ramset.com 100 100
• Note: static load limits cannot be combined
75lbs
BC18ST
• offered with or without nut and bolt attached • Zinc plated steel
beam/PuRlin
100lbs
75 Lbs
100 Lbs
Ramset #
Description
A0600B A1600B A2600B
1/2" EMT, 3/8" to 1/2" Rigid, beam clamp to conduit hanger 4-c 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger 1" EMT, 1" Rigid, beam clamp to conduit hanger
Pkg Qty 100 100 100
A0600B
• Fits 1/16" to 1/4" vertical flanges • Static load capacity: 100lbs •vertical, Accommodates tooling for floor 25lbs horizontal installations
Ramset # Description Ramset # Description L1701 (J-Clip) 1/16" to 1/4" for vertical flange 500KC1234 1/2" and 3/4" beam clamp to conduit – vertical 500KC1234B 1/2" and 3/4" beam clamp to conduit – horizontal2-c
Pkg Qty Pkg Qty 100 100 100
Ramset # Description Ramset # Description L1801 (Clip-Pur) 1/16" to 1/4" angled Z-Purlin SFC18 1/8" to 1/4" flange beam clamp SFC516 5/16" to 1/2" flange beam clamp SFC916 9/16" to 3/4" flange beam clamp
Pkg Qty Pkg Qty 300 100 100 100
500KC1234
• Fast easy attachment of pre-tied hanger wire Z-Purlins • Installed withfrom hammer on bulb and beams load • tees Fits 1/16" to 1/4"with thickstatic Z-Purlin capacity of 200lbs • 217lbs allowable working load • Clearance for 1/4" bolt in tab
SFC18
• Works with L1701 and L1801 For strong, reliable attachment • Installed without power tools of hanger wire from open web bar • Compensates for angle of purlin joists or purlins •• Static load capacity: 100lbs threads easily into any 1/2”
PH threaded pipe— no hammering, punching holes or wrapping wire
• two magnetized strips included
1-c
Ramset #
Description
Box Qty
Ramset # L-1700
Description J-Master installation tool
Pkg1Qty
PH PH14T PH38T PKC1234
Z-Purlin with 1/4" bottom hole Z-Purlin for 1/4" threaded rod Z-Purlin for 3/8" threaded rod 1/2" or 3/4" conduit to Z-Purlin
100 100 100 100
• Fast, easy installation from floor level, no ladders or scaffolding necessary 4-c
beam/PuRlin
PH14T
PKC1234
• Suspends #12, #10, #9 or #8 wire, 1/4" or 3/8" plain or threaded rod from1/16" vertical flanges (FH)flanges • Fits to 1/4" vertical Suspends 1/4" ortooling 3/8" threaded ••4Accommodates for floor rod from vertical flanges 1/16" to FH116 installations 1/4" thick (RF)
Ramset #
Description
Pkg Qty
FH116 Ramset # FH532 L1701 (J-Clip) RF53214T RF53238T
1/16" to 5/16" vertical flange Description 5/32" to 1/4" vertical flange to 1/4" for flange verticalforflange 5/32"1/16" to 1/4" vertical #8 wire or 1/4" threaded rod 5/32" to 1/4 vertical flange for 3/8" threaded rod 2-c
100 Pkg Qty 100 100 100 100
• Static load capacity: 160lbs (RF) • Fast easy attachment of pre-tied hanger wire from Z-Purlins
RF53214T
• Fits 1/16" to 1/4" thick Z-Purlin • Fits 1/16” to 1/4” thick • Z-Purlin 217lbs allowable working (ABC25) or verticalload
Ramset #
Description
L1801 (Clip-Pur)
1/16" to 1/4" angled Z-Purlin
flanges (VBC25)
• Accommodates tooling for • floor Worksinstallations with L1701 and L1801ABC25
ABC25
VBC25
• For strong, reliable attachment of hanger wire from open web bar joists or purlins
Pkg Qty 300
Ramset #
Description
ABC25 VBC25
1/16"-1/4" for angled flange (Z purlin) for S-hooks, perf. strap & wire 1/16-1/4" for vert flange for S-hooks, perforated strap & wire
1-c
Ramset # with Description Works Caddy VAFT or Ramset L1700 installation tools. L-1700 J-Master installation tool
Pkg Qty 100 100 Box Qty 1
• threads easily into any 1/2” threaded pipe— no hammering, punching holes or wrapping wire • two magnetized strips included • Fast, easy installation from floor level, no ladders or scaffolding necessary • Suspends #12, #10, #9 or #8 wire, 1/4" or 3/8" plain or threaded rod from vertical flanges (FH) • Suspends 1/4" or 3/8" threaded rod from vertical flanges 1/16" to 1/4" thick (RF)
FH116
Ramset #
Description
Pkg Qty
FH116 FH532 RF53214T RF53238T
1/16" to 5/16" vertical flange 5/32" to 1/4" vertical flange 5/32" to 1/4" vertical flange for #8 wire or 1/4" threaded rod 5/32" to 1/4 vertical flange for 3/8" threaded rod
100 100 100 100
• Static load capacity: 160lbs (RF) RF53214T
• Fits 1/16” to 1/4” thick Z-Purlin (ABC25) or vertical flanges (VBC25) • Accommodates tooling for ABC25 floor installations ABC25 9 ELECTRICAL SUBMITTAL
VBC25
Ramset #
Description
ABC25 VBC25
1/16"-1/4" for angled flange (Z purlin) for S-hooks, perf. strap & wire ITW Ramset 1/16-1/4" for vert flange for S-hooks, perforated strap & wire
Works with Caddy VAFT or Ramset L1700 installation tools.
Pkg Qty 100 100
1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
metal Stud SuPPoRt • Supports electrical boxes located between studs on 16" or 24" centers; boxes attach using selftapping screws • Made from pre-galvanized steel
BMB16
Ramset #
Description
BMB16 BMB16D BMB24 BMB24D
1 1/2" box mounting bracket – 16" centers 2 1/2" box mounting bracket – 16" centers 1 1/2" box mounting bracket – 24" centers 2 1/2" box mounting bracket – 24" centers
• Designed to secure horizontal runs of Rigid, IMt, AC, MC, BX, or PVC through metal studs BAKC1234
Pkg Qty
Ramset #
Description
BAKC1234 BA75
1/2", 3/4" latching conduit support thru metal studs 1/2", 3/4" push conduit support thru1-c metal studs
Pkg Qty 100 100
BA75
• Conduit to stud fastener
Ramset #
Description
• Designed to quickly secure horizontal runs of Rigid, eMt, AC, MC, BX, or PVC to metal studs
SBKC1234 SBKC1 SB75 SB100
1/2" or 3/4" conduit to metal stud 1" conduit to metal stud 3/4" conduit, 1/2" rigid to metal stud 1" conduit, 3/4" rigid to metal stud
• Flexible conduit/cable fastener
Ramset #
Description
• Push clip attaches BX, MC or AC cable to metal studs
BXC
MC, AC, or BX to metal stud
• Installed using a hammer only
Ramset #
Description
• Secures boxes to most metal studs
S1900
hammer-on electrical box support to stud
SBKC1234
50 50 50 50
2-c
Pkg Qty 100 100 100 100
SB75
• Screw attached support for box and conduit • For use with either metal or wood studs
• Screw attached support for electrical boxes
Description 4" box stud support clip used with self-tapping screws
Pkg Qty
FBO234
box support for 2 1/2" and 3 1/2" studs box support for 4" studs box support for 6" studs
Ramset #
Description
SBS3.5
SBS SBS3.5 SBS6
2 1/2" to 4" box support premarked: bendable 3 1/2" far side box support 6" far side box support
• Can be used at three heights • Made from pre-galvanized steel
10
Ramset #
Description
• Bracket supports electrical boxes from floor or channels
ELECTRICAL SUBMITTAL
100
SS
Ramset #
• Clips on electrical boxes for additional support
100
Pkg Qty
FBO23 FBO234 FBO6
• Made from pre-galvanized steel
SBS
Pkg Qty
100
Pkg Qty 100 100 100
Pkg Qty
Ramset #
Description
BS18
floor mounted - box support
100 100 100
Pkg Qty 50
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
metal Stud SuPPoRt • No tools required
Ramset #
Description
• Mounts quickly in the back of the box–just push in and snap tight
DLS1
push-in far side box support – for various stud wall depths
Pkg Qty 100
2-c
• Designed for 3 5/8" steel studs • May be used on standard 1 1/2" or 2 1/8" deep boxes
1-c
• Protects wires from damage by metal studs • All pieces are the same shape, eliminating the hassle of stocking right and left grommet parts
Ramset #
Description
Pkg Qty
G100
grommets for metal studs
100 pr
• easy to install. No tools required • Complies with 2002 NeC Article 300.4(1)
• Quick installation • one-piece break-away design • Box is supported by drywall—no stud is necessary
Ramset #
Description
Pkg Qty
BST
secures electrical box to finished drywall
100 sets
Pkg Qty
• Prevents box from pulling out of drywall • Made from pre-galvanized steel • Mounts standard outlets and wall switches in oversize openings, lending stability and preventing broken cover plates
Ramset #
Description
OR
mounts standard outlets in oversize openings
Ramset #
Description
MSU050EG MSU075EG MSU100EG MSU125EG MSU150EG MSU200EG MSU250EG MSU300EG MSU350EG MSU400EG
1/2" universal pipe clamp 3/4" universal pipe clamp 1" universal pipe clamp 1 1/4" universal pipe clamp 1 1/2" universal pipe clamp 2" universal pipe clamp 2 1/2" universal pipe clamp 3" universal pipe clamp 3 1/2" universal pipe clamp 4" universal pipe clamp
100
• Made from pre-galvanized steel
StRut clamPS • Universal pipe clamp • Same pipe fits eMt, GRC/IMC & standard piping • Parts are made on punch press dies from hot rolled, pickled and oiled steel which conforms to the AStMA-366, A-575 and A-576 standards • Parts are zinc plated after fabrication • Zinc plated nut and bolt included with each part
11
ELECTRICAL SUBMITTAL
Pkg Qty 100 100 100 100 50 50 50 50 25 25
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
Rod hangeRS • Suspends #8 wire, 1/4" and 3/8" plain or threaded rod from overhead mountings with a clearance hole for 1/4" bolt • Static load capacity: not to exceed 160lbs
RA14
• Hangers made from high carbon steel; zinc phosphate and oil finish; angle bracket made from preRA14T galvanized steel
RA14
Ramset #
Description
RO14 RA38 RA14 RA38T RA14T
#8 wire or 1/4" plain rod – side mount 3/8" plain rod 2-c #8 wire or 1/4" plain rod – bottom mount 3/8" threaded rod with thread impression – bottom mount 1/4" threaded rod with thread impression – bottom mount
Pkg Qty 100 100 100 100 100
1-c
• Suspends #8 wire (RA14 only), 1/4" and 3/8" plain rod from overhead mountings with a clearance hole for 1/4" bolt • Static load capacity: not to exceed R1814 160lbs • Static Load Capacity for R51614 & R91614 not to exceed 200lbs • No nut required
R1814T
• Suspends strapping thru 1" wide from beam flanges 1/8" to 3/4" thick, parallel or at right angles to beam • Static load capacity: 200lbs
PSF18
Ramset #
Description
Pkg Qty
R1814 R51614 R91614 R1814T R1838T R51614T R51638T
1/8" to 1/4" flange for #8 wire or 1/4" plain rod 5/16" to 1/2" flange for 1/4" plain rod 9/16" to 3/4" flange for 1/4" plain rod 1/8" to 1/4" flange for 1/4" threaded rod 1/8" to 1/4" flange for 3/8" threaded rod 5/16" to 1/2" flange for 1/4" threaded rod 5/16" to 1/2" flange for 3/8" threaded rod
Ramset #
Description
PSF18 PSF516 PSF916 PSF18R PSF516R PSF916R
1/8" to 1/4" strap hanger 5/16" to 1/2" strap hanger 9/16" to 3/4" strap hanger 1/8" to 1/4" twisted strap hanger 5/16" to 1/2" twisted strap hanger 9/16" to 3/4" twisted strap hanger
100 100 100 100 100 100 100
Pkg Qty 100 100 100 100 100 100
acouStical • top mounted acoustical t-bar fastener
Ramset #
Description
• Riveted assembly fits 3/8" to 1" conduit
TBKC1234
1/2", 3/4" T-bar fastener conduit clamp – top
Pkg Qty 100
• Supports boxes and conduit above t-bar
• Clip-on positive support for troffers and lay-in fixtures • Complies with NeC Article 410-16 means of support
Ramset # FT
Description
Pkg Qty
lay in and troffer light fixture support clips for acoustical support
100
• Fits round or rectangular head t-bars • Supports electrical fixtures to t-bar 15/16" wide
Ramset #
Description
• Assembled with 1" oD wing nut washer
SCT3
twist-on T-Bar hanger with 1/4"–20 x 5/8" stud with washer
• Box to t-Bar fastener
Ramset #
Description
• Snap-on 24" span box hanger with dual height adjustment allows flush or 3/4" offset mount
TBAR
box to T-Bar snap-on fixture with 24" span
Pkg Qty 100
• 1/4"–20 stud 5/8" long
Pkg Qty 50
• Zinc plated steel with Black Claw™ spring steel hardware included • Works with BBC
12
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
loW-voltage • Cost effective alternative to cable tray
Ramset #
Description
• Wide surface saddle provides support without stress for category 5, fiber-optic, and other sensitive voice/datacom cables
646RS 648RS 654RS BR2S
1 1/2" bridle ring with 1/4"–20 thread with saddle 2" bridle ring with 1/4"–20 thread 2-c with saddle 4" bridle ring with 1/4"–20 thread with saddle 2" snap-on plastic saddle for 2" bridle ring
648RS
• Available as assembled units or saddle only for retrofit
Pkg Qty 50 50 50 100
• Saddle molded onto 4" bridle ring BR2S
1-c
• Supports communications cable and other low voltage uses • Used with beam clamps • Zinc plated steel
Ramset #
Description
646R 648R
1 1/2" bridle ring with 1/4"–20 thread 2" bridle ring with 1/4"–20 thread
Pkg Qty
Ramset #
Description
WBF1
low voltage mounting bracket
Ramset #
Description
100 100
648R
• Provides base for securing communications lines without use of electrical box • Mounts standard plate
Pkg Qty 100
• Hardware included • Made from pre-galvanized steel • Holds up to 80 category 5e and 50 category 6 strands
J200
• Cost effective alternative to expensive cable tray
Pkg Qty
2" J-Hook
50
the versatile J-hook System can come pre-assembled with beam clamps, bat Wings, hammer-on Flange and Purlin clips.
• Accommodates category 5, fiber-optic and interduct • Provides support without stress to sensitive voice/ data cables • Continuous wide-base radius supports natural curve of cable, eliminating kinking and bending • Cable wire retainer is supplied with every part • Unique design eliminates the need for attachment plate when stacking
haRdWaRe acceSSoRieS • Box to bar fastener (BBC) • t-Bar mounting and retaining clips (BBC)
1202CF
72013
Ramset #
Description
BBC 1202CF 72013
T-bar box mounting clip with screw angle bracket 1/4" mounting hole #12 Jack Chain – per 100’
Pkg Qty 100 100 1
• Zinc plated steel (BA)
13
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
White + 50% black
All white
Spring Steel Fasteners
ELECTRICAL SYSTEMS SUBMITTAL A Submittal Guide for Spring Steel Fastening Applications
1
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
TABLE OF CONTENTS American Made. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 LEED Credits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Spring Steel - Black Claw
Conduit/Cable Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Beam/Purlin Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Metal Stud Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Strut Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Rod Hangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Acoustical/Ceiling Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Low-voltage/Misc. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
BUY AMERICAN ACT
The American Recovery and Reinvestment Act of 2009 requires that all construction materials for federal, state and local stimulus projects must be manufactured in the United States. Ramset is unique in the world of construction tools, fasteners and sealant manufacturing. Overall, 98% of Ramset fasteners and accessories are made in the USA. Unlike our competitors you know you are buying American made products and supporting the American economy and workers when you buy Ramset. Ramset’s parent company, Illinois Tool Works (NYSE: ITW) employees more than 25,000 Americans.
Manufacturer
Tools
3
Fasteners
Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL Glendale Heights, IL
Paris, KY Itasca, IL Paris, KY Paris, KY Paris, KY Paris, KY Paris, KY
Hilti
Austria
Liechtenstein/ China
Powers
Japan/ China
China
Tyrex
Taiwan
China
Simpson
China
China
St Louis, MO Pontotoc, MS
Sealant Manufacturing Spring Steel Manufacturing Wedge Anchors and LDT Anchors Manufacturing Tapcon Manufacturing
Rockland, MA Addison, IL Michigan City, IN Itasca, IL
EZ Anchor Manufacturing
Elk Grove Village, IL
ELECTRICAL SUBMITTAL
SEC. 1605
iron, steel, l, and American iron, stee ed in —Use of uc usion of SEC. 1605 tured goods. (3) incl red goods prod se the ufac increa opriated ufactu pr ill an and man w ap m e s e fund d States t by mor th te by ec ni of e U oj e bl the all pr (a) Non e made availa t the over is a projec cost of t. en or otherw ay be used for rc pe m l teration, than 25 this Act a Federa ines ction, al a public constru e head of term for the repair of l (c) If th t or agency de ance, or work unless al en aive the rtm w pa to mainten ic y de bl ufacor pu necessar (a) and man ect are building that it is n of subsection bsection n, steel, oj su io of the iro s used in the pr es. applicat finding under ent at od sed on a of the departm tured go in the United St ba the head t apply produced (b), the shall publish in written ) shall no ses (a d n cy ile tio en ca ec or ag r a deta provision (b) Subs tegory of deral Registe e se or ca Fe Federal n as to why th in any ca e head of the tio th volved justifica aived. in which t or agency in w g ied in en is be l be appl ted al departm sh n ld at— sectio ith Uni (a) wou finds th (d) This r consistent w rnabsection te ne su in ic an r bl ng yi pu unde in a m (1) appl with the ligations nsistent States ob ements. be inco agre ican l er na m ; st nt tio “A leva intere HR 1, 2009”, d the re t t Act of ed from steel, an no *Excerpt d Reinvestmen 05 an (2) iron, red goods are ction 16 Recovery ates in tu XVI, Se manufac in the United St ailable n A, Title sio vi Di av produced and reasonably ory t ct sufficien and of a satisfa s quantitie or quality;
Ramset Tools: TrakFast GypFast T3SS T3Mag Rocket Rocketmag D45A
Ramset Manufacturing: Powder Loads Manufacturing Gas Fuel Cells Production
T
AN AC
MERIC
BUY A
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
April 22, 2009 To Whom It May Concern: This letter is to certify that the following Minerallac and Ramset products are manufactured and/or assembled in the United States of America: Manufactured in Addison, IL and South Holland, IL, and components assembled in Hampshire, IL: • KC1234, KC1234T • RF series • HIC50, HIC75 • PSF series • FSBX, FS1, FS2 FS3, FS4, APS • SCT3 • All BC series accessories • TB and TS series • All SFC series accessories • TBAR • 500 series • FT • FH series • BXC • R18 and R516 series The following Ramset spring steel products are manufactured in Franklin Park, IL: • L1710 • L1801 The following Minerallac products are manufactured and assembled in the United States of America: • FBO series • 600 series • DLS1 • A0600B, A1600B, A2600B • PH series • BBC • RA series • 646 and 648 series • SB series • WBF1 • SS • J200 • BMB series The following Ramset products are manufactured in Franklin Park, IL: • 120CF The following Minerallac products are assembled in the United States of America: • 701, 702, 703 - Raw castings from Germany; tapping, plating & assembly occurs domestically. For further information or any questions please contact Tom Colangelo at Ramset. Tom Colangelo Electrical Marketing Manager 630-694-4675
4
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
LEED CREDITS
What is LEED
The purpose of Leadership in Energy and Environmental Design (LEED) is to construct buildings in an energy efficient manner and reduce the buildings’ energy consumption. As a result, these buildings can help conserve non-renewable energy resources; decrease dependence on foreign oil; and lower greenhouse gas emissions.
Ramset LEED Credit EQ 4.1
EQ 4.1 was developed with the intent to reduce the quality of indoor air contaminants that are odorous, irritating, and/or harmful to the comfort and well being of installers and occupants.
Ramset’s SC200 sound control sealant meets LEED EQ credit 4.1 for low emitting VOC materials and earns 1 LEED point.
Ramset LEED Credit MR 5.1
MR 5.1 was developed with the intent to increase demand for building materials and products that are extracted and manufactured within the region, thereby supporting the use of indigenous resources and reducing the environmental impact resulting from transportation. Ramset’s pins, sealants, spring steel products, electrical accessories and anchors may meet the requirements for LEED MR 5.1 if your project falls within 500 miles of our manufacturing facilities.
Rockland, MA (02370) Sealant Addison, IL (60101) Spring Steel Elk Grove Village, IL (60007) EZ Anchor Itasca, IL (60143)Tapcon/GypFast & Fasteners
Michigan City, IN (46360) Wedge Anchors LDT Anchors Paris, KY (40361) Powder & Gas Fasteners
How to calculate LEED MR 5.1
LEED MR Credit 5.1 is calculated on a 500 mile radius from/to distribution points. Use Google Maps to calculate the distance to your project from:
5
Location
Zip Code Product
Addison, IL
60101
Spring Steel
Elk Grove Village, IL 60007
EZ Anchor
Itasca, IL
60143
Tapcon/GypFast & Fasteners
Michigan City, IN
46360
Wedge & LDT Anchors
Rockland, MA
02370
Sealant
Paris, KY
40361
Powder & Gas Fasteners
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
conduit/cable SuPPoRt • Supports conduit and all types of cable from rods or flanges • Note: FSBX bat wings are designed for positioning only; no Vertical Vertical load rating Vertical Flange Flange Flange
FXBX
FS2 Vertical Vertical Vertical Wire or Rod Wire oror Rod Wire Rod
25lbs 25 LBS LBS 2525 LBS
50 LBS 50lbs 50 LBS 50 LBS
Horizontal Horizontal Horizontal Flange Flange Flange
Ramset #
Description
FSBX FS1 FS2 FS3 FS4
bat wing support clip MC, AC OR BX and #12 to #8 wire 1/2" bat wing 2-c 3/4" bat wing 1" bat wing 1 1/4" bat wing
Description fits 1/8" to 3/8" flanges threaded for 1/4"–20
Pkg Qty
Ramset #
Description
APSKC1234
latching conduit clamp 1/2"–3/4"
• Available both non-keyholed and keyholed for 1/4"–20 screw
Pkg Qty 100
Ramset # Description
25lbs KC1234T
25 25LBS LBS
HIC75
15lbs Lbs 1515 Lbs
• No fastener required • Designed to quickly secure one conduit run to another
Pkg Qty
KC38 3/8" conduit clamp with thread impression for 1/4"–20 stud KC1234 1/2" and 3/4" conduit clamp KC1234T 1/2" and 3/4" conduit clamp with thread impression for 1/4"–20 stud
100lbs
100 100LBS LBS
100 100 100
Holding values are for accessories and do not include anchoring method.
• Available both non-keyholed and keyholed for 1/4"–20 screw • Ultimate static load limit: 25lbs vertical; 15lbs horizontal
100
25 LBS
50 LBS
25 LBS
• Attaches conduit to flanges, wire or rod
• No fastener required
Ramset # APS 50lbs
25lbs 50 LBS
• Ultimate static load limit: 100lbs vertical; 25lbs horizontal
100 100 100 100 100
1-c
100lbs 100 LBS 100 100 LBS LBS
• Attaches conduit or boxes to flanges, wire or rod • Fits 1/8" to 3/8" flanges; attaches to #12 wire through 3/8" rod; attaches #10–24 or 1/4"–20 threaded Bridle Rings (position only)
Pkg Qty
25lbs 25 25 LbsLbs
Ramset #
Description
HIC50 HIC75
1/2" snap into place EMT 3/4" snap into place EMT
Pkg Qty 100 100
Holding values are for accessories and do not include anchoring method.
Ramset #
Description
HIC7575
3/4" to 3/4" conduit
Pkg Qty 100
• Ultimate Static Load Limit: 25lbs • Note: top conduit to be used for support only, not a raceway
6
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
conduit/cable Side Mount Flange Push Clip • Suspends conduit from bottom of beam • Will pivot 360 degrees • Installs with hammer only
SFC1875
15lbs
Ramset #
Description
SFC1875 SFC18100
3/4" conduit side mount for 1/8" to 1/4" 2-cflange 1" conduit side mount for 1/8" to 1/4" flange
Static Load Pkg Qty 15lbs 15lbs
100 100
15 Lbs
Side Mount Flange Latch Clip • Suspends conduit from side of beam • Will pivot 360 degrees • Installs with hammer only
SFC516KC1
25lbs 25 LBS
Ramset #
Description
SFC18KC1234 SFC18KC1 SFC18KC114 SFC18KC2 SFC516KC1234 SFC516KC1 SFC516KC114 SFC516KC112 SFC916KC38 SFC916KC1234 SFC916KC1
1/2" to 3/4" conduit side mount for 1/8" to 1/4" flange 1" conduit side mount for 1/8" to 1/4" flange 1 1/4" conduit side mount for 1/8" to 1/4" flange 2" conduit side mount for 1/8" to 1/4" flange 1/2" to 3/4" conduit side mount for 5/16" to 1/2" flange 1" conduit side mount for 5/16" to 1/2" flange 1 1/4" conduit side mount for 5/16" to 1/2" flange 1 1/2" conduit side mount for 5/16" to 1/2" flange 3/8" conduit side mount for 9/16" to 3/4" flange 1/2" to 3/4" conduit side mount for 9/16" to 3/4" flange 1" conduit side mount for 9/16" to 3/4" flange
Static Load Pkg Qty
1-c
25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs 25lbs
100 100 100 100 100 100 100 100 100 100 100
Holding values are for accessories and do not include anchoring method. Bottom Flange Push Clip • Suspends conduit from bottom of beam • Will pivot 360 degrees • Installs with hammer only
BC1875
25lbs 25 Lbs
Ramset #
Description
BC1850 BC1875
1/2" conduit bottom mount for 1/8" to 1/4" flange 3/4" conduit bottom mount for 1/8" to 1/4" flange
Static Load Pkg Qty 25lbs 25lbs
100 100
Holding values are for accessories and do not include anchoring method. Bottom Flange Latch Clip
• Suspends conduit from bottom of beam • Will pivot 360 degrees • Installs with hammer only
75lbs
BC516KC1
75 LBS
Ramset #
Description
Static Load Pkg Qty
BC18KC38 BC18KC1234 BC18KC1 BC18KC114 BC516KC38 BC516KC1234 BC516KC1 BC516KC114 BC516KC112 BC516KC2 BC916KC38 BC916KC1234
3/8" conduit bottom mount for 1/8" to 1/4" flange 1/2" to 3/4" conduit bottom mount for 1/8" to 1/4" flange 1" conduit bottom mount for 1/8" to 1/4" flange 1 1/4" conduit bottom mount for 1/8" to 1/4" flange 3/8" conduit bottom mount for 5/16" to 1/2" flange 1/2" to 3/4" conduit bottom mount for 5/16" to 1/2" flange 1" conduit bottom mount for 5/16" to 1/2" flange 1 1/4" conduit bottom mount for 5/16" to 1/2" flange 1 1/2" conduit bottom mount for 5/16" to 1/2" flange 2" conduit bottom mount for 5/16" to 1/2" flange 3/8" conduit bottom mount for 9/16" to 3/4" flange 1/2" to 3/4" conduit bottom mount for 9/16" to 3/4" flange
75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs 75lbs
100 100 100 100 100 100 100 100 100 100 100 100
Holding values are for accessories and do not include anchoring method.
• Secures conduit and electrical boxes to most structures • Provides conduit support on both sides of electrical box • With hole for screw or threaded rod mount or with 1/4”–20 x 5/8” stud
7
ELECTRICAL SUBMITTAL
CBS18KC1234
CBS18KC1234
Ramset #
Description
CBS18KC1234 CBS18KC1234ST CBS18KC38
conduit box support for 1/2"-3/4" conduit, has “star” hole for 1/4"–20 conduit box support for 1/2"-3/4" conduit with 1/4"–20 stud conduit box support for 3/8" conduit with 1/4"–20 stud
Pkg Qty 25 25 25
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
beam/PuRlin • Fast installation; fits beam flange to 1/2" • Used with 1/4" and 3/8" threaded rod, "S" hooks, conduit hangers, electrical boxes, and #10–24 or 1/4"-20 bridle rings •• Fast fits 100lbs beam flange Staticinstallation; load capacity: to 1/2"
Ramset #
Description
500
beam clamp up to 1/2" flange – 1/4" to 3/8" threaded rod
Pkg Qty 4-c 2-c
beam/PuRlin
• Used with 1/4" and 3/8" threaded • Used with conduit hangers #0 to rod, "S" hooks, conduit hangers, #5, bridleboxes, rings and rod electrical andthreaded #10–24 or 1/4"-20 bridle rings • Case hardened steel set screw tappedload at ancapacity: angle, locks on beam • Static 100lbs • Zinc plated steel or stainless steel
600
Ramset #
Description
500
beam clamp up to 1/2" flange – 1/4" to 3/8" threaded rod
Ramset #
Description
600 602 602B
1/2" universal beam clamp 1/4"–20 1-c 3/4" universal beam clamp – 3/8" bottom only 3/4" universal beam clamp 3/8"–16 flange; 3/8" rod
100
Pkg Qty 100 Pkg Qty
2-c
50 25 25
4-c
beam/PuRlin
• UsedLoad with conduit #0 to Ramset # Description Pkg Qty Ratingshangers for Minerallac 600 & 60010 (Bottom Hole Only) #5, bridle rings and threaded rod Partbeam No. clamp 1/4"–20 Static Load Limit*Pkg50Qty Static Load 600 Limit* • UsedPart with No. conduit hangers, bridle 1/2" universal 1-c Ramset # Description •• Fast installation; fits beam Case hardened set rings600 and drop steel rods, 3/8"screw toflange 1/2" Ramset # Description Pkg Qty 75 lbs.700 602 602 3/4" flange universal beam clamp 3/8" bottom only tapped bottom and back 200 lbs. 25 1/2" malleable beam –clamp for 1/4"–20; 50 to 1/2" at an angle, locks on beam tapped 602B 200 lbs. 60010 75 lbs. • tapped for rods bottom and back 500 beam clamp up to 1/2" flange – 1/4" to 3/8" threaded rod 100 602B 3/4" universal beam clamp 3/8"–16 flange; 3/8" rod 25 701 3/4" flange malleable beam clamp for 5/16"–18 25 Used with threaded •• Zinc steeland or 3/8" stainless steel 600 on allplated sizes1/4" Load Ratings for clamp Minerallac 602 & 602B (Bottom Hole Only) 2-c 702 3/4" flange malleable beam for 3/8"–16 25 rod, "S" hooks, conduit hangers, 700 • Malleable zinc plated steel or electrical boxes, and #10–24 703 7/8" flange malleable beam clamp for 1/2"–13 25 1/4"-20 bridle ringshangers, bridle • Used with conduit Ramset # Description Pkg Qty rings and rods, 100lbs 3/8" to 1/2" • Static loaddrop capacity: 700 1/2" flange malleable beam clamp for 1/4"–20; tapped bottom and back 50 •• Can be used to suspend boxes, tapped for rods bottom and back Ramset # malleable Description Pkg25Qty 701 3/4" flange beam clamp for 5/16"–18 fixtures and bridle rings to beam on all sizes • Used with BC18 1/8" tobeam 1/4" flange clamp with 1/4"–20 thread 100 702 3/4" flange malleable clampbeam for 3/8"–16 25Qty Ramset # Description Pkg flanges 1/8"conduit to 3/4"hangers thick #0 to 700 • Malleable steel rod #5, bridle zinc ringsplated and threaded BC18ST 1/8" to 1/4" flange with 1/4"–20 x 3/8" staked stud 100 703 7/8" flange malleable beam clamp for 1/2"–13 25 600 1/2" universal beam clamp 1/4"–20 50 1-c • Beam clamp with 1.4"–20 x 3/8" • Case steel set screwbox BC18 BC516 5/16" to 1/2" flange beam clamp with 1/4"–20 thread 100 stakedhardened stud used to suspend 602 3/4" universal beam clamp – 3/8" bottom only 25 Load forlocks Minerallac tapped atRatings an angle, on beam700 Series (Bottom Hole Only) from bottom of beam BC516ST 5/16" clamp to 1/2"3/8"–16 flange with 1/4"3/8" to 20 100 602B 3/4" universal beam flange; rodx 3/8" staked stud 25 600 Part No. Static Load Limit* •• Can be used toload suspend Zinc plated steel or stainless steel BC916 9/16" to 3/4" flange beam clamp with 1/4"–20 thread 100 Ultimate static limit:boxes, 75lbs or Ramset # Description Pkg Qty 700 and bridle rings to beam 275 lbs. fixtures 100lbs Holding values are for accessories and do not include anchoring method. BC18 1/8" to 1/4" flange beam clamp with 1/4"–20 thread 100 flanges 1/8" to 3/4" thick 70010 275 lbs. 100lbs 75lbs • Note: static load limits cannot be BC18ST 100Qty •• Used with conduit hangers,x 3/8" bridle BC18ST 701 525 lbs.Ramset # Beam clamp with 1.4"–20 Description 1/8" to 1/4" flange with 1/4"–20 x 3/8" staked stud Pkg combined 75 Lbs 100 Lbs rings and drop rods, 3/8" to 1/2" BC516 5/16" to 1/2" flange beam clamp with 1/4"–20 thread 100 staked stud used to suspend box BC18 702 750 lbs.700 1/2" flange malleable beam clamp for 1/4"–20; tapped bottom and back 50 from bottom of beam BC516ST 5/16" to 1/2" flange with 1/4" to 20 x 3/8" staked stud 100 • tapped for rods bottom and back 703 900 lbs.701 3/4" flange malleable beam clamp for 5/16"–18 25 on all sizes BC916 9/16" to 3/4" flange beam clamp with 1/4"–20 thread 100Qty • offered Ultimate static limit:nut 75lbs with orload without and or Ramset # Description Pkg 702 3/4" flange malleable beam clamp for 3/8"–16 25 700 100lbs attached • bolt Malleable zinc plated *Static Load Limitsteel - is a rated stationary load limit. Minerallac's standards require test load equal to three times this load rating (Safety Factor of three). Holding values are for accessories and do not include anchoring method. 703 7/8"a flange malleable beam clamp for 1/2"–13 25 A0600B 1/2" EMT, 3/8" to 1/2" Rigid, beam clamp to conduit hanger 100 75lbs 100lbs Note:plated static steel load limits cannot be • Zinc A1600B 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger 100 BC18ST combined 75 Lbs 100 Lbs A2600B 1" EMT, 1" Rigid, beam clamp to conduit hanger 100 • Can be used to suspend boxes, A0600B Ramset # Description Pkg Qty fixtures and bridle rings to beam • offered with to or 3/4" without BC18 100Qty Ramset # Description 1/8" to 1/4" flange beam clamp with 1/4"–20 thread Pkg flanges 1/8" thicknut and • Static load capacity: 100lbs bolt attached Ramset # Description Pkg BC18ST 1/8" to Rigid, 1/4" flange with 1/4"–20 x 3/8"hanger staked stud 100Qty A0600B 1/2" EMT, 3/8" to 1/2" beam clamp to conduit 100 • vertical, Beam clamp with 1.4"–20 x 3/8" 25lbs horizontal • Zinc plated steel 500KC1234 1/2" and 3/4" beam clamp to conduit – vertical 100 BC516 5/16" to 1/2" flange beam clamp with 1/4"–20 thread staked stud used to suspend box BC18 A1600B 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger 100 from bottom of beam 500KC1234B BC516ST 1/2" and1"3/4" beam clamp toflange conduit – horizontal 100 5/16" to 1/2" with 1/4" to 20 x 3/8" staked stud A2600B 1" EMT, Rigid, beam clamp to conduit hanger 100 • Ultimate static load limit: 75lbs or A0600B 100lbs 500KC1234 •• Static 100lbs Note: load staticcapacity: load limits cannot be horizontalon bulb combined • vertical, Installed25lbs with hammer tees and beams with static load capacity of 200lbs •• offered with without Clearance foror1/4" bolt innut taband bolt attached • Zinc plated steel • Installed with hammer on bulb and beams static load • tees Installed withoutwith power tools capacity of 200lbs • Compensates for angle of purlin • Clearance for 1/4" bolt in tab ••Static Staticload loadcapacity: capacity:100lbs 100lbs vertical, 25lbs horizontal
BC18ST
500KC1234 SFC18
A0600B SFC18 PH
ELECTRICAL • Installed8 without power toolsSUBMITTAL • Compensates for angle of purlin • StaticPH14T load capacity: 100lbs
500KC1234 PKC1234
BC916
9/16" to 3/4" flange beam clamp with 1/4"–20 thread
Holding values are for accessories and do not include anchoring method. 100lbs Ramset # Description 75 Lbs 100 Lbs # Ramset Description 500KC1234 1/2" and 3/4" beam clamp to conduit – vertical SFC18 1/8" and to 1/4" 500KC1234B 1/2" 3/4"flange beambeam clampclamp to conduit – horizontal SFC516 5/16" to 1/2" flange beam clamp Ramset # Description SFC916 9/16" to 3/4" flange beam clamp A0600B 1/2" EMT, 3/8" to 1/2" Rigid, beam clamp to conduit hanger A1600B 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger Ramset # Description A2600B 1" EMT, 1" Rigid, beam clamp to conduit hanger Ramset # Description SFC18 1/8" to 1/4" flange beam clamp SFC516 5/16" to 1/2" beam clamp PH Z-Purlin withflange 1/4" bottom hole SFC916 9/16" to 3/4" flange beam clamp PH14T Z-Purlin for 1/4" threaded rod Ramset # Description
75lbs
PH38T 500KC1234 PKC1234 500KC1234B Ramset #
Z-Purlin for 3/8" threaded rodconduit – vertical 1/2" and 3/4" beam clamp to 1/2" or 3/4" conduit to Z-Purlin 1/2" and 3/4" beam clamp to conduit – horizontal Description
PH PH14T
Z-Purlin with 1/4" bottom hole Z-Purlin for 1/4" threaded rod
100
Pkg Qty Pkg 100Qty 100 100 Pkg Qty 100 100 100 Pkg Qty 100 Pkg 100Qty 100 100 100 100 Pkg Qty
100 100 ITW Ramset 100 100 1.800.RAMSET6 (1.800.726.7386) Pkg Qty www.ramset.com 100 100
• Note: static load limits cannot be combined
75lbs
BC18ST
• offered with or without nut and bolt attached • Zinc plated steel
beam/PuRlin
100lbs
75 Lbs
100 Lbs
Ramset #
Description
A0600B A1600B A2600B
1/2" EMT, 3/8" to 1/2" Rigid, beam clamp to conduit hanger 4-c 3/4" EMT, 3/4" Rigid, beam clamp to conduit hanger 1" EMT, 1" Rigid, beam clamp to conduit hanger
Pkg Qty 100 100 100
A0600B
• Fits 1/16" to 1/4" vertical flanges • Static load capacity: 100lbs •vertical, Accommodates tooling for floor 25lbs horizontal installations
Ramset # Description Ramset # Description L1701 (J-Clip) 1/16" to 1/4" for vertical flange 500KC1234 1/2" and 3/4" beam clamp to conduit – vertical 500KC1234B 1/2" and 3/4" beam clamp to conduit – horizontal2-c
Pkg Qty Pkg Qty 100 100 100
Ramset # Description Ramset # Description L1801 (Clip-Pur) 1/16" to 1/4" angled Z-Purlin SFC18 1/8" to 1/4" flange beam clamp SFC516 5/16" to 1/2" flange beam clamp SFC916 9/16" to 3/4" flange beam clamp
Pkg Qty Pkg Qty 300 100 100 100
500KC1234
• Fast easy attachment of pre-tied hanger wire Z-Purlins • Installed withfrom hammer on bulb and beams load • tees Fits 1/16" to 1/4"with thickstatic Z-Purlin capacity of 200lbs • 217lbs allowable working load • Clearance for 1/4" bolt in tab
SFC18
• Works with L1701 and L1801 For strong, reliable attachment • Installed without power tools of hanger wire from open web bar • Compensates for angle of purlin joists or purlins •• Static load capacity: 100lbs threads easily into any 1/2”
PH threaded pipe— no hammering, punching holes or wrapping wire
• two magnetized strips included
1-c
Ramset #
Description
Box Qty
Ramset # L-1700
Description J-Master installation tool
Pkg1Qty
PH PH14T PH38T PKC1234
Z-Purlin with 1/4" bottom hole Z-Purlin for 1/4" threaded rod Z-Purlin for 3/8" threaded rod 1/2" or 3/4" conduit to Z-Purlin
100 100 100 100
• Fast, easy installation from floor level, no ladders or scaffolding necessary 4-c
beam/PuRlin
PH14T
PKC1234
• Suspends #12, #10, #9 or #8 wire, 1/4" or 3/8" plain or threaded rod from1/16" vertical flanges (FH)flanges • Fits to 1/4" vertical Suspends 1/4" ortooling 3/8" threaded ••4Accommodates for floor rod from vertical flanges 1/16" to FH116 installations 1/4" thick (RF)
Ramset #
Description
Pkg Qty
FH116 Ramset # FH532 L1701 (J-Clip) RF53214T RF53238T
1/16" to 5/16" vertical flange Description 5/32" to 1/4" vertical flange to 1/4" for flange verticalforflange 5/32"1/16" to 1/4" vertical #8 wire or 1/4" threaded rod 5/32" to 1/4 vertical flange for 3/8" threaded rod 2-c
100 Pkg Qty 100 100 100 100
• Static load capacity: 160lbs (RF) • Fast easy attachment of pre-tied hanger wire from Z-Purlins
RF53214T
• Fits 1/16" to 1/4" thick Z-Purlin • Fits 1/16” to 1/4” thick • Z-Purlin 217lbs allowable working (ABC25) or verticalload
Ramset #
Description
L1801 (Clip-Pur)
1/16" to 1/4" angled Z-Purlin
flanges (VBC25)
• Accommodates tooling for • floor Worksinstallations with L1701 and L1801ABC25
ABC25
VBC25
• For strong, reliable attachment of hanger wire from open web bar joists or purlins
Pkg Qty 300
Ramset #
Description
ABC25 VBC25
1/16"-1/4" for angled flange (Z purlin) for S-hooks, perf. strap & wire 1/16-1/4" for vert flange for S-hooks, perforated strap & wire
1-c
Ramset # with Description Works Caddy VAFT or Ramset L1700 installation tools. L-1700 J-Master installation tool
Pkg Qty 100 100 Box Qty 1
• threads easily into any 1/2” threaded pipe— no hammering, punching holes or wrapping wire • two magnetized strips included • Fast, easy installation from floor level, no ladders or scaffolding necessary • Suspends #12, #10, #9 or #8 wire, 1/4" or 3/8" plain or threaded rod from vertical flanges (FH) • Suspends 1/4" or 3/8" threaded rod from vertical flanges 1/16" to 1/4" thick (RF)
FH116
Ramset #
Description
Pkg Qty
FH116 FH532 RF53214T RF53238T
1/16" to 5/16" vertical flange 5/32" to 1/4" vertical flange 5/32" to 1/4" vertical flange for #8 wire or 1/4" threaded rod 5/32" to 1/4 vertical flange for 3/8" threaded rod
100 100 100 100
• Static load capacity: 160lbs (RF) RF53214T
• Fits 1/16” to 1/4” thick Z-Purlin (ABC25) or vertical flanges (VBC25) • Accommodates tooling for ABC25 floor installations ABC25 9 ELECTRICAL SUBMITTAL
VBC25
Ramset #
Description
ABC25 VBC25
1/16"-1/4" for angled flange (Z purlin) for S-hooks, perf. strap & wire ITW Ramset 1/16-1/4" for vert flange for S-hooks, perforated strap & wire
Works with Caddy VAFT or Ramset L1700 installation tools.
Pkg Qty 100 100
1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
metal Stud SuPPoRt • Supports electrical boxes located between studs on 16" or 24" centers; boxes attach using selftapping screws • Made from pre-galvanized steel
BMB16
Ramset #
Description
BMB16 BMB16D BMB24 BMB24D
1 1/2" box mounting bracket – 16" centers 2 1/2" box mounting bracket – 16" centers 1 1/2" box mounting bracket – 24" centers 2 1/2" box mounting bracket – 24" centers
• Designed to secure horizontal runs of Rigid, IMt, AC, MC, BX, or PVC through metal studs BAKC1234
Pkg Qty
Ramset #
Description
BAKC1234 BA75
1/2", 3/4" latching conduit support thru metal studs 1/2", 3/4" push conduit support thru1-c metal studs
Pkg Qty 100 100
BA75
• Conduit to stud fastener
Ramset #
Description
• Designed to quickly secure horizontal runs of Rigid, eMt, AC, MC, BX, or PVC to metal studs
SBKC1234 SBKC1 SB75 SB100
1/2" or 3/4" conduit to metal stud 1" conduit to metal stud 3/4" conduit, 1/2" rigid to metal stud 1" conduit, 3/4" rigid to metal stud
• Flexible conduit/cable fastener
Ramset #
Description
• Push clip attaches BX, MC or AC cable to metal studs
BXC
MC, AC, or BX to metal stud
• Installed using a hammer only
Ramset #
Description
• Secures boxes to most metal studs
S1900
hammer-on electrical box support to stud
SBKC1234
50 50 50 50
2-c
Pkg Qty 100 100 100 100
SB75
• Screw attached support for box and conduit • For use with either metal or wood studs
• Screw attached support for electrical boxes
Description 4" box stud support clip used with self-tapping screws
Pkg Qty
FBO234
box support for 2 1/2" and 3 1/2" studs box support for 4" studs box support for 6" studs
Ramset #
Description
SBS3.5
SBS SBS3.5 SBS6
2 1/2" to 4" box support premarked: bendable 3 1/2" far side box support 6" far side box support
• Can be used at three heights • Made from pre-galvanized steel
10
Ramset #
Description
• Bracket supports electrical boxes from floor or channels
ELECTRICAL SUBMITTAL
100
SS
Ramset #
• Clips on electrical boxes for additional support
100
Pkg Qty
FBO23 FBO234 FBO6
• Made from pre-galvanized steel
SBS
Pkg Qty
100
Pkg Qty 100 100 100
Pkg Qty
Ramset #
Description
BS18
floor mounted - box support
100 100 100
Pkg Qty 50
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
metal Stud SuPPoRt • No tools required
Ramset #
Description
• Mounts quickly in the back of the box–just push in and snap tight
DLS1
push-in far side box support – for various stud wall depths
Pkg Qty 100
2-c
• Designed for 3 5/8" steel studs • May be used on standard 1 1/2" or 2 1/8" deep boxes
1-c
• Protects wires from damage by metal studs • All pieces are the same shape, eliminating the hassle of stocking right and left grommet parts
Ramset #
Description
Pkg Qty
G100
grommets for metal studs
100 pr
• easy to install. No tools required • Complies with 2002 NeC Article 300.4(1)
• Quick installation • one-piece break-away design • Box is supported by drywall—no stud is necessary
Ramset #
Description
Pkg Qty
BST
secures electrical box to finished drywall
100 sets
Pkg Qty
• Prevents box from pulling out of drywall • Made from pre-galvanized steel • Mounts standard outlets and wall switches in oversize openings, lending stability and preventing broken cover plates
Ramset #
Description
OR
mounts standard outlets in oversize openings
Ramset #
Description
MSU050EG MSU075EG MSU100EG MSU125EG MSU150EG MSU200EG MSU250EG MSU300EG MSU350EG MSU400EG
1/2" universal pipe clamp 3/4" universal pipe clamp 1" universal pipe clamp 1 1/4" universal pipe clamp 1 1/2" universal pipe clamp 2" universal pipe clamp 2 1/2" universal pipe clamp 3" universal pipe clamp 3 1/2" universal pipe clamp 4" universal pipe clamp
100
• Made from pre-galvanized steel
StRut clamPS • Universal pipe clamp • Same pipe fits eMt, GRC/IMC & standard piping • Parts are made on punch press dies from hot rolled, pickled and oiled steel which conforms to the AStMA-366, A-575 and A-576 standards • Parts are zinc plated after fabrication • Zinc plated nut and bolt included with each part
11
ELECTRICAL SUBMITTAL
Pkg Qty 100 100 100 100 50 50 50 50 25 25
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
Rod hangeRS • Suspends #8 wire, 1/4" and 3/8" plain or threaded rod from overhead mountings with a clearance hole for 1/4" bolt • Static load capacity: not to exceed 160lbs
RA14
• Hangers made from high carbon steel; zinc phosphate and oil finish; angle bracket made from preRA14T galvanized steel
RA14
Ramset #
Description
RO14 RA38 RA14 RA38T RA14T
#8 wire or 1/4" plain rod – side mount 3/8" plain rod 2-c #8 wire or 1/4" plain rod – bottom mount 3/8" threaded rod with thread impression – bottom mount 1/4" threaded rod with thread impression – bottom mount
Pkg Qty 100 100 100 100 100
1-c
• Suspends #8 wire (RA14 only), 1/4" and 3/8" plain rod from overhead mountings with a clearance hole for 1/4" bolt • Static load capacity: not to exceed R1814 160lbs • Static Load Capacity for R51614 & R91614 not to exceed 200lbs • No nut required
R1814T
• Suspends strapping thru 1" wide from beam flanges 1/8" to 3/4" thick, parallel or at right angles to beam • Static load capacity: 200lbs
PSF18
Ramset #
Description
Pkg Qty
R1814 R51614 R91614 R1814T R1838T R51614T R51638T
1/8" to 1/4" flange for #8 wire or 1/4" plain rod 5/16" to 1/2" flange for 1/4" plain rod 9/16" to 3/4" flange for 1/4" plain rod 1/8" to 1/4" flange for 1/4" threaded rod 1/8" to 1/4" flange for 3/8" threaded rod 5/16" to 1/2" flange for 1/4" threaded rod 5/16" to 1/2" flange for 3/8" threaded rod
Ramset #
Description
PSF18 PSF516 PSF916 PSF18R PSF516R PSF916R
1/8" to 1/4" strap hanger 5/16" to 1/2" strap hanger 9/16" to 3/4" strap hanger 1/8" to 1/4" twisted strap hanger 5/16" to 1/2" twisted strap hanger 9/16" to 3/4" twisted strap hanger
100 100 100 100 100 100 100
Pkg Qty 100 100 100 100 100 100
acouStical • top mounted acoustical t-bar fastener
Ramset #
Description
• Riveted assembly fits 3/8" to 1" conduit
TBKC1234
1/2", 3/4" T-bar fastener conduit clamp – top
Pkg Qty 100
• Supports boxes and conduit above t-bar
• Clip-on positive support for troffers and lay-in fixtures • Complies with NeC Article 410-16 means of support
Ramset # FT
Description
Pkg Qty
lay in and troffer light fixture support clips for acoustical support
100
• Fits round or rectangular head t-bars • Supports electrical fixtures to t-bar 15/16" wide
Ramset #
Description
• Assembled with 1" oD wing nut washer
SCT3
twist-on T-Bar hanger with 1/4"–20 x 5/8" stud with washer
• Box to t-Bar fastener
Ramset #
Description
• Snap-on 24" span box hanger with dual height adjustment allows flush or 3/4" offset mount
TBAR
box to T-Bar snap-on fixture with 24" span
Pkg Qty 100
• 1/4"–20 stud 5/8" long
Pkg Qty 50
• Zinc plated steel with Black Claw™ spring steel hardware included • Works with BBC
12
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
4-c
loW-voltage • Cost effective alternative to cable tray
Ramset #
Description
• Wide surface saddle provides support without stress for category 5, fiber-optic, and other sensitive voice/datacom cables
646RS 648RS 654RS BR2S
1 1/2" bridle ring with 1/4"–20 thread with saddle 2" bridle ring with 1/4"–20 thread 2-c with saddle 4" bridle ring with 1/4"–20 thread with saddle 2" snap-on plastic saddle for 2" bridle ring
648RS
• Available as assembled units or saddle only for retrofit
Pkg Qty 50 50 50 100
• Saddle molded onto 4" bridle ring BR2S
1-c
• Supports communications cable and other low voltage uses • Used with beam clamps • Zinc plated steel
Ramset #
Description
646R 648R
1 1/2" bridle ring with 1/4"–20 thread 2" bridle ring with 1/4"–20 thread
Pkg Qty
Ramset #
Description
WBF1
low voltage mounting bracket
Ramset #
Description
100 100
648R
• Provides base for securing communications lines without use of electrical box • Mounts standard plate
Pkg Qty 100
• Hardware included • Made from pre-galvanized steel • Holds up to 80 category 5e and 50 category 6 strands
J200
• Cost effective alternative to expensive cable tray
Pkg Qty
2" J-Hook
50
the versatile J-hook System can come pre-assembled with beam clamps, bat Wings, hammer-on Flange and Purlin clips.
• Accommodates category 5, fiber-optic and interduct • Provides support without stress to sensitive voice/ data cables • Continuous wide-base radius supports natural curve of cable, eliminating kinking and bending • Cable wire retainer is supplied with every part • Unique design eliminates the need for attachment plate when stacking
haRdWaRe acceSSoRieS • Box to bar fastener (BBC) • t-Bar mounting and retaining clips (BBC)
1202CF
72013
Ramset #
Description
BBC 1202CF 72013
T-bar box mounting clip with screw angle bracket 1/4" mounting hole #12 Jack Chain – per 100’
Pkg Qty 100 100 1
• Zinc plated steel (BA)
13
ELECTRICAL SUBMITTAL
ITW Ramset 1.800.RAMSET6 (1.800.726.7386) www.ramset.com
