Emergency Ballast DEB-6LP CB-32300
codes and standards
emergency illumination
• UL Listed in accordance with the standards set forth in UL924 • UL Listed for factory installation or field retrofit. • NFPA 70 (National Electric Code) • NFPA101 (Life Safety Code) • UL Listed for damp locations
• The DEB-6LP produces 600 to 1325 lumens at 25°C initial emergency light output. During emergency illumination, one lamp is illuminated, even if installed with a multi-lamp AC ballast.
CB-32300 rev. 3, 06/29/2012
Emergency Ballast DEB-6LP
suggested specifications
• Emergency lighting shall be provided by using a standard fluorescent luminaire equipped with a DEB-6LP emergency ballast. This emergency ballast application shall consist of a high temperature, maintenance • The DEB-6LP low profile fluorescent emergency free nickel cadmium battery, charger and electronic ballast works in conjunction with a low-profile or circuitry contained in one 21.5"x1.18"x1.18" standard size AC ballast to convert new or existing galvanized steel case. A solid-state charging standard or high-output T5 and T8 fluorescent indicator light to monitor the charger and battery, fixtures into unobtrusive emergency lighting. The a single-pole test switch, and installation hardware emergency ballast consists of a high temperature shall be provided. The emergency ballast shall be nickel-cadmium battery, charger and electronic, capable of operating one 14-54W (2’-4’) standard standard, energy saving and dimming AC ballasts. If or high-output T5; 17-55W (2’-5’) standard or used in an emergency-only fixture, no AC ballast high-output T8; or 36-55W (4-pin) long compact is necessary. fluorescent lamp in the emergency mode for operation a minimum of 90 minutes. The DEB-6LP shall produce 600 to 1325 lumens initial emergency • When AC power fails, the DEB-6LP immediately light output, have 3 Watts of input power, and an switches to the emergency mode, keeping one lamp 21 Watt-hour battery capacity, and comply with illuminated at high lumen output for a minimum of emergency standards set forth by the current 90 minutes. When AC power is restored, the DEBNEC. The emergency ballast shall be UL Listed 6LP automatically returns to the charging mode. for installation inside or on top of the luminaire, battery warranted for five full years from date of purchase. • Since high temperatures exist in fluorescent electrical luminaires, the DEB-6LP uses a specially • Dual input voltage 120/277 constructed, high temperature nickel cadmium battery. This battery requires no maintenance, • Electrical rating – 3.0 Watts and has a life expectancy of 7 to 10 years. The • AC input current – 180 mA suggested operating temperature range is 32°F • Recharge time – 24 hours (0°C) to 122°F (50°C). • Test switch provided – LED restrictions • Charging indicator light provided • Suitable for indoor and damp locations and for sealed and gasketed fixtures including installation • Ballast case dimensions – 21.5"x1.18"x1.18" inside of fixtures rated for wet locations. It is not • Battery charging current - 165mA suitable for installation in wet locations, hazardous locations or for air handling air outlet applications. • Weight – 3.3 lbs.
installation
warranty
• This emergency ballast does not affect normal luminaire operation and may be used with either a switched or unswitched luminaire. If a switched luminaire is used, an unswitched hot lead must be connected to the emergency ballast. The emergency ballast must be fed from the same branch circuit as the AC ballast. The DEB-6LP may be installed inside or on top of luminaire. Installation is not recommended with luminaires where the ambient temperature may fall below 32°F (0°C) for extended periods.
• Five year warranty on unit from date of purchase.
Ordering Information For retrofit field installation. Order catalog number DEB-6LP. For factory installed DEB-6LP use a suffix number -E6LP with luminaire catalog number.
Low Profile Fluorescent, 600-1325 Lumens One T5, T5HO, or T8 Lamp, Damp Location
Specifier’s Reference Project Type Model No. Comments
CB-32300
DEB-6LP Low Profile Fluorescent, 600-1325 Lumens
rev. 3 06/29/2012
dimensions
Deb-6LP Charging Indicator Light
1.18" (30mm)
Test Switch
DEB-6LP
1.18" (30mm)
FLUORESCENT EMERGENCY BALLAST 21.5" (546.1mm)
Ballast Channel Cover
Table 2 - Initial Lumen Output
Table 1 - Lamp Compatibility Lamp
Base
Wattage (Length)
No. of Lamps (Emergency)
T5/HO
Minature Bipin
24-54W (2'-4')
1
T5
Minature Bipin
14-28W (2'-4')
1
Long Compact
4-PIN (2G11)
36-55W
1
T8
Bipin
32W (4')
1
40W (5')
1
44W (4')
1
T8/HO
Bipin
Lumens Lamp
1 Lamp
FP54, F54T5/HO
1250
FP39, F39T5/HO
1125
FP24 F24T5/HO
725
FP28 F28T5
1250
FP21 F21T5
1025
FP14 F14T5
750
FP17T8
650
FP25T8
750
F32T8, (4')
1100
F40T8, (5')
1325
F40T8/HO (4', 44W)
1275
PL-L 50W, F50BX/RS, FT55DL
1050
PL-L 40W, F40/30BX, FT40DL/RS
925
PL-L 36W, F39/36BX, FT36DL
900
wiring diagrams WALL SWITCH HOT
WALL SWITCH WHT/RED
B L K
TEST SWITCH B L K
INVERTER CONNECTOR CHARGING INDICATOR LIGHT (CAP UNUSED LEAD)
RED WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
COMMON
E MB EA RL GL EA NS CT Y
HOT
RED YELLOW
WHT/RED B L K
LAMP
YEL/BLK
TEST SWITCH
BLU/WHT
BLUE
BLUE
BLUE
WHT/BLK BLK
CHARGING INDICATOR LIGHT
B L K
RED
1 LAMP RAPID START BALLAST
RED
INVERTER CONNECTOR
(CAP UNUSED LEAD)
RED
WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
COMMON
E MB EA RL GL EA NS CT Y
RED YELLOW
BLUE
BLK
WALL SWITCH WHT/RED
TEST SWITCH B L K
CHARGING INDICATOR LIGHT (CAP UNUSED LEAD)
COMMON
RED
Two (2) Lamp Instant Start Ballast
WALL SWITCH
INVERTER CONNECTOR
1 LAMP INSTANT START BALLAST
WHT
Two (2) Lamp Rapid Start Ballast B L K
BLUE
WHT/BLK
WHT
HOT
LAMP
YEL/BLK BLU/WHT
RED WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
E MB EA RL GL EA NS CT Y
HOT
RED YELLOW
WHT/RED B L K
LAMP 1 (EMERGENCY)
YEL/BLK
TEST SWITCH
BLU/WHT
BLUE
BLUE
BLUE
WHT/BLK BLK
RED
2 LAMP RAPID START BALLAST
RED
B L K
LAMP 2
YELLOW YELLOW
WHT
©2012 Philips Chloride All rights reserved. 776 South Green Street • Tupelo, MS 38804 p. 800.234.1890 • f. 662.841.5501 Canadian Division 189 Bullock Drive • Markham, Ontario L3P 1W4 p. 905.294.9570 • f. 905.294.9811
INVERTER CONNECTOR CHARGING INDICATOR LIGHT (CAP UNUSED LEAD)
COMMON
RED WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
E MB EA RL GL EA NS CT Y
RED YELLOW
LAMP 1 (EMERGENCY)
YEL/BLK BLU/WHT
BLUE
BLUE
WHT/BLK BLK
BLUE
2 LAMP INSTART START BALLAST
WHT
Contact Factory for Additional Configurations. Specifications are subject to change without notice.
RED
LAMP 2
emergency illumination
• UL Listed in accordance with the standards set forth in UL924 • UL Listed for factory installation or field retrofit. • NFPA 70 (National Electric Code) • NFPA101 (Life Safety Code) • UL Listed for damp locations
• The DEB-6LP produces 600 to 1325 lumens at 25°C initial emergency light output. During emergency illumination, one lamp is illuminated, even if installed with a multi-lamp AC ballast.
CB-32300 rev. 3, 06/29/2012
Emergency Ballast DEB-6LP
suggested specifications
• Emergency lighting shall be provided by using a standard fluorescent luminaire equipped with a DEB-6LP emergency ballast. This emergency ballast application shall consist of a high temperature, maintenance • The DEB-6LP low profile fluorescent emergency free nickel cadmium battery, charger and electronic ballast works in conjunction with a low-profile or circuitry contained in one 21.5"x1.18"x1.18" standard size AC ballast to convert new or existing galvanized steel case. A solid-state charging standard or high-output T5 and T8 fluorescent indicator light to monitor the charger and battery, fixtures into unobtrusive emergency lighting. The a single-pole test switch, and installation hardware emergency ballast consists of a high temperature shall be provided. The emergency ballast shall be nickel-cadmium battery, charger and electronic, capable of operating one 14-54W (2’-4’) standard standard, energy saving and dimming AC ballasts. If or high-output T5; 17-55W (2’-5’) standard or used in an emergency-only fixture, no AC ballast high-output T8; or 36-55W (4-pin) long compact is necessary. fluorescent lamp in the emergency mode for operation a minimum of 90 minutes. The DEB-6LP shall produce 600 to 1325 lumens initial emergency • When AC power fails, the DEB-6LP immediately light output, have 3 Watts of input power, and an switches to the emergency mode, keeping one lamp 21 Watt-hour battery capacity, and comply with illuminated at high lumen output for a minimum of emergency standards set forth by the current 90 minutes. When AC power is restored, the DEBNEC. The emergency ballast shall be UL Listed 6LP automatically returns to the charging mode. for installation inside or on top of the luminaire, battery warranted for five full years from date of purchase. • Since high temperatures exist in fluorescent electrical luminaires, the DEB-6LP uses a specially • Dual input voltage 120/277 constructed, high temperature nickel cadmium battery. This battery requires no maintenance, • Electrical rating – 3.0 Watts and has a life expectancy of 7 to 10 years. The • AC input current – 180 mA suggested operating temperature range is 32°F • Recharge time – 24 hours (0°C) to 122°F (50°C). • Test switch provided – LED restrictions • Charging indicator light provided • Suitable for indoor and damp locations and for sealed and gasketed fixtures including installation • Ballast case dimensions – 21.5"x1.18"x1.18" inside of fixtures rated for wet locations. It is not • Battery charging current - 165mA suitable for installation in wet locations, hazardous locations or for air handling air outlet applications. • Weight – 3.3 lbs.
installation
warranty
• This emergency ballast does not affect normal luminaire operation and may be used with either a switched or unswitched luminaire. If a switched luminaire is used, an unswitched hot lead must be connected to the emergency ballast. The emergency ballast must be fed from the same branch circuit as the AC ballast. The DEB-6LP may be installed inside or on top of luminaire. Installation is not recommended with luminaires where the ambient temperature may fall below 32°F (0°C) for extended periods.
• Five year warranty on unit from date of purchase.
Ordering Information For retrofit field installation. Order catalog number DEB-6LP. For factory installed DEB-6LP use a suffix number -E6LP with luminaire catalog number.
Low Profile Fluorescent, 600-1325 Lumens One T5, T5HO, or T8 Lamp, Damp Location
Specifier’s Reference Project Type Model No. Comments
CB-32300
DEB-6LP Low Profile Fluorescent, 600-1325 Lumens
rev. 3 06/29/2012
dimensions
Deb-6LP Charging Indicator Light
1.18" (30mm)
Test Switch
DEB-6LP
1.18" (30mm)
FLUORESCENT EMERGENCY BALLAST 21.5" (546.1mm)
Ballast Channel Cover
Table 2 - Initial Lumen Output
Table 1 - Lamp Compatibility Lamp
Base
Wattage (Length)
No. of Lamps (Emergency)
T5/HO
Minature Bipin
24-54W (2'-4')
1
T5
Minature Bipin
14-28W (2'-4')
1
Long Compact
4-PIN (2G11)
36-55W
1
T8
Bipin
32W (4')
1
40W (5')
1
44W (4')
1
T8/HO
Bipin
Lumens Lamp
1 Lamp
FP54, F54T5/HO
1250
FP39, F39T5/HO
1125
FP24 F24T5/HO
725
FP28 F28T5
1250
FP21 F21T5
1025
FP14 F14T5
750
FP17T8
650
FP25T8
750
F32T8, (4')
1100
F40T8, (5')
1325
F40T8/HO (4', 44W)
1275
PL-L 50W, F50BX/RS, FT55DL
1050
PL-L 40W, F40/30BX, FT40DL/RS
925
PL-L 36W, F39/36BX, FT36DL
900
wiring diagrams WALL SWITCH HOT
WALL SWITCH WHT/RED
B L K
TEST SWITCH B L K
INVERTER CONNECTOR CHARGING INDICATOR LIGHT (CAP UNUSED LEAD)
RED WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
COMMON
E MB EA RL GL EA NS CT Y
HOT
RED YELLOW
WHT/RED B L K
LAMP
YEL/BLK
TEST SWITCH
BLU/WHT
BLUE
BLUE
BLUE
WHT/BLK BLK
CHARGING INDICATOR LIGHT
B L K
RED
1 LAMP RAPID START BALLAST
RED
INVERTER CONNECTOR
(CAP UNUSED LEAD)
RED
WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
COMMON
E MB EA RL GL EA NS CT Y
RED YELLOW
BLUE
BLK
WALL SWITCH WHT/RED
TEST SWITCH B L K
CHARGING INDICATOR LIGHT (CAP UNUSED LEAD)
COMMON
RED
Two (2) Lamp Instant Start Ballast
WALL SWITCH
INVERTER CONNECTOR
1 LAMP INSTANT START BALLAST
WHT
Two (2) Lamp Rapid Start Ballast B L K
BLUE
WHT/BLK
WHT
HOT
LAMP
YEL/BLK BLU/WHT
RED WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
E MB EA RL GL EA NS CT Y
HOT
RED YELLOW
WHT/RED B L K
LAMP 1 (EMERGENCY)
YEL/BLK
TEST SWITCH
BLU/WHT
BLUE
BLUE
BLUE
WHT/BLK BLK
RED
2 LAMP RAPID START BALLAST
RED
B L K
LAMP 2
YELLOW YELLOW
WHT
©2012 Philips Chloride All rights reserved. 776 South Green Street • Tupelo, MS 38804 p. 800.234.1890 • f. 662.841.5501 Canadian Division 189 Bullock Drive • Markham, Ontario L3P 1W4 p. 905.294.9570 • f. 905.294.9811
INVERTER CONNECTOR CHARGING INDICATOR LIGHT (CAP UNUSED LEAD)
COMMON
RED WHITE VIOLET BROWN BLACK 120V OR
ORANGE 277V WHITE
E MB EA RL GL EA NS CT Y
RED YELLOW
LAMP 1 (EMERGENCY)
YEL/BLK BLU/WHT
BLUE
BLUE
WHT/BLK BLK
BLUE
2 LAMP INSTART START BALLAST
WHT
Contact Factory for Additional Configurations. Specifications are subject to change without notice.
RED
LAMP 2
