enclosed & gasketed - angled lens eg3
ENCLOSED & GASKETED - aNGLED LENS PRODUCT HIGHLIGHTS • Vaportight design • High-impact resistant, reinforced fiberglass housing. • Injection molded hi impact lens acrylic with lineal ribbing as standard. Optional polycarbonate lenses with lineal ribs and prismatic lenses available. Polycarbonate lenses are UV stabilized for outdoor use. • Lens secured to housing with polycarbonate latches. Eight on the 4’ housings, fourteen on the 8’ housings, and four on the 2’ housing. Optional stainless steel latches are securely spring clipped to the housing, eliminating latch fall off during servicing. • Gasket is a continuously poured non-toxic, fire resistant, uniform width and thickness for a tight seal.
eg3
CONSTRUCTION - Inner tray of codegauge, die-formed, steel. Outer housing molded of high-impact, polyester/UL5VA fiberglass with inner lip bonded with continuous, compressible, closed-cell neoprene gasketing. ELECTRICAL -All devices UL/CUL listed. Suitable for damp locations. Damp location emergency pack must be specified separately. Ballasts are energysaving, solid-state electronic. Ballasts and lampholders replaceable without removing from ceiling. Discrete voltage must be specified for emergency pack options when wired with flex. Where lamps are included as part of the fixture, lamp CRI and color temperature must be specified.
FINISH - All metal parts painted after fabrication following treatment with • Gear tray snaps-in for easy ballast access. phosphate rust inhibitor. Finish coating Tray is retained by a safety tether attached to of housing reflecting surfaces is with inside of housing. white, high reflectance (minimum 92%) • (2) stainless steel mounting brackets polyester powder. are furnished with each fixture, and can Photometrics - Please visit our web site be mounted to surface where required. at www.lsi-industries.com for detailed Housing snaps into bracket easing photometric data. installation. Brackets accept V-hooks or snap-on steel bail for cable suspension. • National Sanitation Foundation and Canadian Standards Association approved and listed.
ARRA
DImENSIONS
4 1/4" (108mm)
4" (102mm) *Available in 4’ only
1 LAmP N BODY
6 13/16" (170mm)
2 LAmP W BODY
American Innovation
Funding Compliant
American Made
damp location wet location
ORDERING INFORMATION TYPICAL ORDER EXAMPLE: Prefix Lamps EG3
11 1 22
1 22
EG3
Body Style
1
N
Lamp Type
N - Narrow body 2 Foot 14 - 14 W T5 W - Wide body 24 - 24 W HO T5 17 - 17 W T8 4 Foot 28 - 28 W T5 54 - 54 W HO T5 32 - 32 W T8 8 Foot* W - Wide body 28-2 - 28 W T5 32-2 - 32 W T8 54-2 - 54 W T5 * Tandem 4’ lamp combinations only
1- “N” Body only available in 4 ft. length
32
SSO10 WL UE
Ballasts SS5R - T5 Programmed Start SS5D - T5 Dimming (specify type) SS5HO - T5HO SSOD - T8 Dimming (specify type) SSOL - T8 Low Watt SSOHL- T8 High Ballast Factor SSOHLR- T8 Program Start High Ballast Factor SSOR - T8 Programmed Start SSO10 - T8
eg3
CONSTRUCTION - Inner tray of codegauge, die-formed, steel. Outer housing molded of high-impact, polyester/UL5VA fiberglass with inner lip bonded with continuous, compressible, closed-cell neoprene gasketing. ELECTRICAL -All devices UL/CUL listed. Suitable for damp locations. Damp location emergency pack must be specified separately. Ballasts are energysaving, solid-state electronic. Ballasts and lampholders replaceable without removing from ceiling. Discrete voltage must be specified for emergency pack options when wired with flex. Where lamps are included as part of the fixture, lamp CRI and color temperature must be specified.
FINISH - All metal parts painted after fabrication following treatment with • Gear tray snaps-in for easy ballast access. phosphate rust inhibitor. Finish coating Tray is retained by a safety tether attached to of housing reflecting surfaces is with inside of housing. white, high reflectance (minimum 92%) • (2) stainless steel mounting brackets polyester powder. are furnished with each fixture, and can Photometrics - Please visit our web site be mounted to surface where required. at www.lsi-industries.com for detailed Housing snaps into bracket easing photometric data. installation. Brackets accept V-hooks or snap-on steel bail for cable suspension. • National Sanitation Foundation and Canadian Standards Association approved and listed.
ARRA
DImENSIONS
4 1/4" (108mm)
4" (102mm) *Available in 4’ only
1 LAmP N BODY
6 13/16" (170mm)
2 LAmP W BODY
American Innovation
Funding Compliant
American Made
damp location wet location
ORDERING INFORMATION TYPICAL ORDER EXAMPLE: Prefix Lamps EG3
11 1 22
1 22
EG3
Body Style
1
N
Lamp Type
N - Narrow body 2 Foot 14 - 14 W T5 W - Wide body 24 - 24 W HO T5 17 - 17 W T8 4 Foot 28 - 28 W T5 54 - 54 W HO T5 32 - 32 W T8 8 Foot* W - Wide body 28-2 - 28 W T5 32-2 - 32 W T8 54-2 - 54 W T5 * Tandem 4’ lamp combinations only
1- “N” Body only available in 4 ft. length
32
SSO10 WL UE
Ballasts SS5R - T5 Programmed Start SS5D - T5 Dimming (specify type) SS5HO - T5HO SSOD - T8 Dimming (specify type) SSOL - T8 Low Watt SSOHL- T8 High Ballast Factor SSOHLR- T8 Program Start High Ballast Factor SSOR - T8 Programmed Start SSO10 - T8
