English (.pdf) - Lutron
product specifications
369-662a
08.27.12
QS Wire Landing Board The wire landing board is a wiring aid consisting of a printed circuit board with one set of five terminal blocks. Each terminal block can accept up to two 18 AWG (1.0 mm2) wires and is connected pin-to-pin, to simplify wiring. The wire landing board can be installed in a low-voltage enclosure or at the bottom of a feed-through panel.
QS-WLB
Model Number QS-WLB
Q S Wire Landing Board
www.lutron.com
Lutron® | 1
product specifications
369-662a
08.27.12
QS Wire Landing Board Specifications Model Number
QS-WLB
Low-Voltage Connections
One set of five terminal blocks. Each terminal block has 5 terminals that will each accept up to two 18 AWG (1.0 mm 2) wires.
Environment
Ambient operating temperature: 32 to 104 °F (0 to 40 °C). Ambient operating humidity: 0-90% humidity, non-condensing. Indoor use only.
Mounting
Mounts in the following enclosures: L-LV14-120, L-LV14-230, L-LV21-230, HQ-LV21-120, and HWI-PNL-8
Warranty
www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf
Dimensions Dimensions shown as: in (mm) 1.45 (36.8)
4.036 (102.5)
2 | Lutron®
Technical Support: U.S.A. 800.523.9466 Europe +44.(0)20.7680.4481
product specifications
369-662a
08.27.12
QS Wire Landing Board Configuration Example
DMX
Keypad(s)
Sivoia® QS Shade / Drapery
HomeWorks® QS Keypad
GRAFIK Eye® QS control unit
QS Contact Closure Interface
• Tighten terminal blocks to 3.5 to 5 in-lb (0.4 to 0.57 N•m). Do not overtighten. • Terminal 5 is used to connect the QS cable shield drain wire throughout the system. www.lutron.com
Lutron® | 3
369-662a
08.27.12
QS Wire Landing Board The wire landing board is a wiring aid consisting of a printed circuit board with one set of five terminal blocks. Each terminal block can accept up to two 18 AWG (1.0 mm2) wires and is connected pin-to-pin, to simplify wiring. The wire landing board can be installed in a low-voltage enclosure or at the bottom of a feed-through panel.
QS-WLB
Model Number QS-WLB
Q S Wire Landing Board
www.lutron.com
Lutron® | 1
product specifications
369-662a
08.27.12
QS Wire Landing Board Specifications Model Number
QS-WLB
Low-Voltage Connections
One set of five terminal blocks. Each terminal block has 5 terminals that will each accept up to two 18 AWG (1.0 mm 2) wires.
Environment
Ambient operating temperature: 32 to 104 °F (0 to 40 °C). Ambient operating humidity: 0-90% humidity, non-condensing. Indoor use only.
Mounting
Mounts in the following enclosures: L-LV14-120, L-LV14-230, L-LV21-230, HQ-LV21-120, and HWI-PNL-8
Warranty
www.lutron.com/TechnicalDocumentLibrary/Warranty.pdf www.lutron.com/TechnicalDocumentLibrary/Intl_Warranty.pdf
Dimensions Dimensions shown as: in (mm) 1.45 (36.8)
4.036 (102.5)
2 | Lutron®
Technical Support: U.S.A. 800.523.9466 Europe +44.(0)20.7680.4481
product specifications
369-662a
08.27.12
QS Wire Landing Board Configuration Example
DMX
Keypad(s)
Sivoia® QS Shade / Drapery
HomeWorks® QS Keypad
GRAFIK Eye® QS control unit
QS Contact Closure Interface
• Tighten terminal blocks to 3.5 to 5 in-lb (0.4 to 0.57 N•m). Do not overtighten. • Terminal 5 is used to connect the QS cable shield drain wire throughout the system. www.lutron.com
Lutron® | 3
