envee⢠highchair with playtable conversion - Badger Basket
ENVEE™ HIGHCHAIR WITH PLAYTABLE CONVERSION Assembly Instructions. Adult Assembly Required. Read all instructions before use. Save instructions for future use.
MODEL NUMBER:
00939 VERSION CODE: 1.0/0409/TG * Your chair’s color/fabric may vary from shown Page 1 of 6
Visit us online at www.badgerbasket.com Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST) Web: http://www.badgerbasket.com/parts • E-mail: [email protected] Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
1.0/0409/TG
BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store or return the product to them. Contact Badger Basket. Most problems are resolved without you needing to leave home. When contacting us, please have this instruction manual, your product model number, and your product version code ready. For fastest service, go to http://www.badgerbasket.com/parts Your Product Version Code is: 1.0/0409/TG USE AND CARE INSTRUCTIONS: Wipe plastic parts with a damp cloth and mild soap as needed. Seat pad can be machine washed, cold water gentle cycle; air dry. Do not tumble dry or iron. Seat pad may be dry cleaned. Insert tray is dishwasher safe.
WARNING - FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH READ ALL INSTRUCTIONS before use of this product. Keep instructions for future use. Use only the parts and hardware provided by Badger Basket. Do not use the product if it is damaged, broken, or missing parts. Hardware may include small parts. Choking Hazard! Keep unassembled parts out of the reach of small children. DO NOT allow anyone to climb, stand on, or play on or inside of this product. It is not a step stool or ladder. Periodically check to make sure all the screws remain tight. It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted. This is usually around six (6) months of age. PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT. Your child MUST ALWAYS be secured with the 5-point seat harness regardless of child’s age and reclined/upright position of the seat. The tray is not designed to hold the child in the chair. ALWAYS keep your child in view while in the chair. NEVER leave your child unattended, not even for “just a minute”. DO NOT make adjustments to the seat height or upright/recline position while child is in the chair. No product is a replacement for adult supervision. Never use this product near a fire, open flame, or a heating appliance such as electric or gas heaters. Page 2 of 6
1.0/0409/TG
Ax1 ASSEMBLY TOOL
Page 3 of 7
Cx1 SEAT
Dx1 SEAT BOLT
Ex1 CHAIR LEFT SIDE
Bx1 SEAT BACK
Fx1 CHAIR RIGHT SIDE
Gx2 CHAIR RAILS
Hx1 TABLE LEFT SIDE
Ix1 TABLE RIGHT SIDE
Jx1 TABLETOP
Kx2 TABLE RAILS
Lx1 FOOTREST
Mx1 INSERT TRAY
Nx1 ADJUSTABLE/MAIN TRAY
Ox18 BOLTS
E
D
E O
A E B
B C
fig.1 Attach the SEAT BACK (PART B) to the SEAT (PART C) by inserting the SEAT BOLT through the hinge where the two parts are joined. (Fig.1)
fig.2
C
fig.3
Insert the two threaded screw posts on the SEAT (PART C) into the corresponding holes on the CHAIR LEFT SIDE (PART E). (Fig.2)
Insert the CHAIR RAILS (PART G) into the corresponding/matching holes on the CHAIR LEFT SIDE (PART E) and secure in place using TWO BOLTS (PART O) and the ASSEMBLY TOOL (PART A).(fig.5)
Add the CHAIR RIGHT SIDE (PART F) making sure all the posts/rails are in the correct holes; securely attach the right side using FOUR BOLTS (PART O) and the ASSEMBLY TOOL (PART A) .(fig. 6 )
fig.4
Insert the post on the SEAT BACK (PART B) into the corresponding hole on the CHAIR LEFT SIDE (PART E)(Fig.3).
Insert TWO BOLTS (PART O) into the holes on the CHAIR LEFT SIDE (PART E) and tighten securely with the A S S E M B LY TO O L ( PA RT A).(fig.4)
Fig.6
Fig.5 E
F G
Assemble the Chair Page 4 of 7
Fig.7
Fig.8 J J
H L K
L
K
I
Assemble the TABLE LEFT SIDE (PART H), TABLETOP (PART J), TABLE RAILS (PART K), and FOOTREST (PART L) as shown, securing all the parts together using FIVE BOLTS (PART O) and the ASSEMBLY TOOL (PART A).(fig.7)
Repeat to attach the TABLE RIGHT SIDE (PART I) using FIVE BOLTS (PART O) and the ASSEMBLY TOOL (PART A).(fig.8)
Assemble the Table Page 5of 7
N
M
Fig.11 Fig.9
Fig.10
Insert the legs of the chair into the corresponding holes on the tabletop. THE CHAIR FITS INTO THE TABLE ONLY ONE WAY. DO NOT FORCE THE CHAIR LEGS INTO THE HOLES. If it does not fit at first, turn the chair around. It should insert smoothly. Push down firmly to be sure the chair is fully seated into the tabletop mounting.(fig.9)
Place your child into the chair. Fasten and adjust the FIVE-POINT SEAT HARNESS so it fits snugly and securely. The waist and shoulder belts both attach to the same latch plate on either side, and then the latch plates are snapped into the harness buckle. To release the harness, simply press the large button in the center of the buckle and both sides will release together.(fig.10)
Snap the latches on both side of the INSERT TRAY (PART M) onto the tabs on both sides of the A D J U S TA B L E / M A I N T R AY (PART N).(fig.11)
Latch
Fig.12 Press the tabs on the underside of both sides of the ADJUSTABLE/MAIN TRAY (PART N) as you line up the tray with the grooves on the CHAIR LEFT AND RIGHT SIDES (PARTS E AND F). Slide the tray smoothly onto the chair. It has three preset positions into which it can lock. TIP: Depending on your floor surface, it may help to hold the unit steady by placing your foot on the front table rail as you insert, adjust, or remove the tray.(fig.12) Adjust the backrest by squeezing the latch on the rear of the seat to release it, move it to the position you desire, and release the latch. Tug on the seat back gently after adjustment to be sure it has locked into place. There is one upright position and two reclined positions for a total of three seat positions.(fig.13)
Fig.13 Assemble the Highchair
Page 6 of 7
6
5
4 Removing and Replacing the Seat Pad
The SEAT PAD may be removed for washing. Release the harness buckle by pressing the center button. Unthread the WAIST belts from the latch plates (not the shoulder belts).
1
2
3
Pull the shoulder, waist, and crotch belts through the holes on the seat pad. Lift the seat pad off the seat. See care instructions on PAGE 2 or on the label attached to the seat pad.
To convert the highchair to a playtable and chair, or to use the chair as a low feeding table with the tray, simply pull the chair legs up and out of the tabletop mounting. Firmly grasp both sides of the chair and pull up on BOTH sides at the same time. It helps to steady the table by placing your foot on the front table rail. The chair and table can be separated and re-joined over and over again giving you added versatility for children of different ages or for different activities throughout your day! For use from approximately six months (when your child can sit unassisted) and up in the highchair (to a maximum of 40 lbs/18 kgs), and from approximately 2 years to approximately 6 years (40 pounds/18 kg) when converted to a playtable and chair (maximum age varies depending on the child's size/weight and activity level). Using the Playtable and Chair Page 7 of 7
MODEL NUMBER:
00939 VERSION CODE: 1.0/0409/TG * Your chair’s color/fabric may vary from shown Page 1 of 6
Visit us online at www.badgerbasket.com Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST) Web: http://www.badgerbasket.com/parts • E-mail: [email protected] Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
1.0/0409/TG
BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store or return the product to them. Contact Badger Basket. Most problems are resolved without you needing to leave home. When contacting us, please have this instruction manual, your product model number, and your product version code ready. For fastest service, go to http://www.badgerbasket.com/parts Your Product Version Code is: 1.0/0409/TG USE AND CARE INSTRUCTIONS: Wipe plastic parts with a damp cloth and mild soap as needed. Seat pad can be machine washed, cold water gentle cycle; air dry. Do not tumble dry or iron. Seat pad may be dry cleaned. Insert tray is dishwasher safe.
WARNING - FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH READ ALL INSTRUCTIONS before use of this product. Keep instructions for future use. Use only the parts and hardware provided by Badger Basket. Do not use the product if it is damaged, broken, or missing parts. Hardware may include small parts. Choking Hazard! Keep unassembled parts out of the reach of small children. DO NOT allow anyone to climb, stand on, or play on or inside of this product. It is not a step stool or ladder. Periodically check to make sure all the screws remain tight. It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted. This is usually around six (6) months of age. PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT. Your child MUST ALWAYS be secured with the 5-point seat harness regardless of child’s age and reclined/upright position of the seat. The tray is not designed to hold the child in the chair. ALWAYS keep your child in view while in the chair. NEVER leave your child unattended, not even for “just a minute”. DO NOT make adjustments to the seat height or upright/recline position while child is in the chair. No product is a replacement for adult supervision. Never use this product near a fire, open flame, or a heating appliance such as electric or gas heaters. Page 2 of 6
1.0/0409/TG
Ax1 ASSEMBLY TOOL
Page 3 of 7
Cx1 SEAT
Dx1 SEAT BOLT
Ex1 CHAIR LEFT SIDE
Bx1 SEAT BACK
Fx1 CHAIR RIGHT SIDE
Gx2 CHAIR RAILS
Hx1 TABLE LEFT SIDE
Ix1 TABLE RIGHT SIDE
Jx1 TABLETOP
Kx2 TABLE RAILS
Lx1 FOOTREST
Mx1 INSERT TRAY
Nx1 ADJUSTABLE/MAIN TRAY
Ox18 BOLTS
E
D
E O
A E B
B C
fig.1 Attach the SEAT BACK (PART B) to the SEAT (PART C) by inserting the SEAT BOLT through the hinge where the two parts are joined. (Fig.1)
fig.2
C
fig.3
Insert the two threaded screw posts on the SEAT (PART C) into the corresponding holes on the CHAIR LEFT SIDE (PART E). (Fig.2)
Insert the CHAIR RAILS (PART G) into the corresponding/matching holes on the CHAIR LEFT SIDE (PART E) and secure in place using TWO BOLTS (PART O) and the ASSEMBLY TOOL (PART A).(fig.5)
Add the CHAIR RIGHT SIDE (PART F) making sure all the posts/rails are in the correct holes; securely attach the right side using FOUR BOLTS (PART O) and the ASSEMBLY TOOL (PART A) .(fig. 6 )
fig.4
Insert the post on the SEAT BACK (PART B) into the corresponding hole on the CHAIR LEFT SIDE (PART E)(Fig.3).
Insert TWO BOLTS (PART O) into the holes on the CHAIR LEFT SIDE (PART E) and tighten securely with the A S S E M B LY TO O L ( PA RT A).(fig.4)
Fig.6
Fig.5 E
F G
Assemble the Chair Page 4 of 7
Fig.7
Fig.8 J J
H L K
L
K
I
Assemble the TABLE LEFT SIDE (PART H), TABLETOP (PART J), TABLE RAILS (PART K), and FOOTREST (PART L) as shown, securing all the parts together using FIVE BOLTS (PART O) and the ASSEMBLY TOOL (PART A).(fig.7)
Repeat to attach the TABLE RIGHT SIDE (PART I) using FIVE BOLTS (PART O) and the ASSEMBLY TOOL (PART A).(fig.8)
Assemble the Table Page 5of 7
N
M
Fig.11 Fig.9
Fig.10
Insert the legs of the chair into the corresponding holes on the tabletop. THE CHAIR FITS INTO THE TABLE ONLY ONE WAY. DO NOT FORCE THE CHAIR LEGS INTO THE HOLES. If it does not fit at first, turn the chair around. It should insert smoothly. Push down firmly to be sure the chair is fully seated into the tabletop mounting.(fig.9)
Place your child into the chair. Fasten and adjust the FIVE-POINT SEAT HARNESS so it fits snugly and securely. The waist and shoulder belts both attach to the same latch plate on either side, and then the latch plates are snapped into the harness buckle. To release the harness, simply press the large button in the center of the buckle and both sides will release together.(fig.10)
Snap the latches on both side of the INSERT TRAY (PART M) onto the tabs on both sides of the A D J U S TA B L E / M A I N T R AY (PART N).(fig.11)
Latch
Fig.12 Press the tabs on the underside of both sides of the ADJUSTABLE/MAIN TRAY (PART N) as you line up the tray with the grooves on the CHAIR LEFT AND RIGHT SIDES (PARTS E AND F). Slide the tray smoothly onto the chair. It has three preset positions into which it can lock. TIP: Depending on your floor surface, it may help to hold the unit steady by placing your foot on the front table rail as you insert, adjust, or remove the tray.(fig.12) Adjust the backrest by squeezing the latch on the rear of the seat to release it, move it to the position you desire, and release the latch. Tug on the seat back gently after adjustment to be sure it has locked into place. There is one upright position and two reclined positions for a total of three seat positions.(fig.13)
Fig.13 Assemble the Highchair
Page 6 of 7
6
5
4 Removing and Replacing the Seat Pad
The SEAT PAD may be removed for washing. Release the harness buckle by pressing the center button. Unthread the WAIST belts from the latch plates (not the shoulder belts).
1
2
3
Pull the shoulder, waist, and crotch belts through the holes on the seat pad. Lift the seat pad off the seat. See care instructions on PAGE 2 or on the label attached to the seat pad.
To convert the highchair to a playtable and chair, or to use the chair as a low feeding table with the tray, simply pull the chair legs up and out of the tabletop mounting. Firmly grasp both sides of the chair and pull up on BOTH sides at the same time. It helps to steady the table by placing your foot on the front table rail. The chair and table can be separated and re-joined over and over again giving you added versatility for children of different ages or for different activities throughout your day! For use from approximately six months (when your child can sit unassisted) and up in the highchair (to a maximum of 40 lbs/18 kgs), and from approximately 2 years to approximately 6 years (40 pounds/18 kg) when converted to a playtable and chair (maximum age varies depending on the child's size/weight and activity level). Using the Playtable and Chair Page 7 of 7
