ESBE CRA112 Setpoint Control Instructions ... - Danfoss Heating
Temperature Sensor Installation
Series CRA112
LVD 2006/95/EC EMC 2004/108/EC RoHS 2002/95/EEC
Distributed by Danfoss in North America www.NA.Heating.Danfoss.com
SERIES CRA112 Setpoint Temperature Controller
Ambient temp: Flow temp. range: Power supply: Power consumption: Max run time at max speed: Weight: Torque: Enclosure rating:
23°F to 131°F (-5°C to 55°C) 41°F to 200°F (5°C to 95°C) 24 ± 10%, 60 Hz 3VA 30 seconds 2 lbs (0,9 kg) 53.1 in.lbs (6 Nm) NEMA 2 (IP41)
Mountable to ESBE 3MG, 4MG, Type G and VRG valves up to 2"
Wrap the sensor
Mtrl.nr. 9814 09 32 Ritn.nr. 8419 utg. A • Rev. 1506
Selection Operation
24V
A
—
+ +
B
24V
+
230V
+
—
Start up 1. Set the required rotation of the controller by pushing the rocker to the right for clockwise opening or left for counter clockwise opening (A). 2. Keep the rocker in the desired direction and connect power (B). 3. Wait 2 seconds before releasing the rocker (C), the desired controller rotation is now set.
C
+
+
T °C
Maximum Temperature Limitation
T
Default:
°F
1200F (490C)
Maximum temperature setting: 2000F (950C)
= MAX ° Max°F
t
4 seconds —
M AX
+
—
Press and hold
—
OK
+ —
+
Press
Return to Setpoint Display
OK —
+
Adjust
20 seconds +
4 seconds —
Wait
Press
+
Press and hold
Minimum Temperature Limitation
T
Default:
°F
= MIN °
410F (50C)
Minimum temperature setting: 410F (50C)
Min °F
t
4 seconds —
+
Press and hold
— —
+ +
Scroll
OK —
+
Press
—
+ —
+
Adjust
Return to Setpoint Display 20 seconds 4 seconds
OK —
+
—
Wait
+
Press and hold
Changing of Setpoint, Primary
T °F
— —
OK
+
—
+
Adjust
+
Press
Wait
°F / °C Temperature Unit Display
Max 100 Ω
T2 °F
10 seconds — —
—
+
Press and hold
+
Scroll
— —
OK
+
+ +
Adjust
—
+
Press
—
+ —
Adjust
OK —
+
Press
+
Wait
OK —
+
Press
Wait
—
Secondary Temperature Setpoint (activated by external signal)
—
+
Adjust
+
Press
Wait
Remove power to the actuator!
6
Externally Wired Relay
Max 100 Ω
T2 °F
C-0 1
2
C-1
5
3
4
Changing of Setpoint Secondary Temperature — —
+ +
OK —
+
T °F
Max 100 Ω
Adjust
Changing of Setpoint Primary Temperature
C-0
C-1 —
—
+ +
Adjust
Press
Wait
OK —
+
Press
Wait
Series CRA112
LVD 2006/95/EC EMC 2004/108/EC RoHS 2002/95/EEC
Distributed by Danfoss in North America www.NA.Heating.Danfoss.com
SERIES CRA112 Setpoint Temperature Controller
Ambient temp: Flow temp. range: Power supply: Power consumption: Max run time at max speed: Weight: Torque: Enclosure rating:
23°F to 131°F (-5°C to 55°C) 41°F to 200°F (5°C to 95°C) 24 ± 10%, 60 Hz 3VA 30 seconds 2 lbs (0,9 kg) 53.1 in.lbs (6 Nm) NEMA 2 (IP41)
Mountable to ESBE 3MG, 4MG, Type G and VRG valves up to 2"
Wrap the sensor
Mtrl.nr. 9814 09 32 Ritn.nr. 8419 utg. A • Rev. 1506
Selection Operation
24V
A
—
+ +
B
24V
+
230V
+
—
Start up 1. Set the required rotation of the controller by pushing the rocker to the right for clockwise opening or left for counter clockwise opening (A). 2. Keep the rocker in the desired direction and connect power (B). 3. Wait 2 seconds before releasing the rocker (C), the desired controller rotation is now set.
C
+
+
T °C
Maximum Temperature Limitation
T
Default:
°F
1200F (490C)
Maximum temperature setting: 2000F (950C)
= MAX ° Max°F
t
4 seconds —
M AX
+
—
Press and hold
—
OK
+ —
+
Press
Return to Setpoint Display
OK —
+
Adjust
20 seconds +
4 seconds —
Wait
Press
+
Press and hold
Minimum Temperature Limitation
T
Default:
°F
= MIN °
410F (50C)
Minimum temperature setting: 410F (50C)
Min °F
t
4 seconds —
+
Press and hold
— —
+ +
Scroll
OK —
+
Press
—
+ —
+
Adjust
Return to Setpoint Display 20 seconds 4 seconds
OK —
+
—
Wait
+
Press and hold
Changing of Setpoint, Primary
T °F
— —
OK
+
—
+
Adjust
+
Press
Wait
°F / °C Temperature Unit Display
Max 100 Ω
T2 °F
10 seconds — —
—
+
Press and hold
+
Scroll
— —
OK
+
+ +
Adjust
—
+
Press
—
+ —
Adjust
OK —
+
Press
+
Wait
OK —
+
Press
Wait
—
Secondary Temperature Setpoint (activated by external signal)
—
+
Adjust
+
Press
Wait
Remove power to the actuator!
6
Externally Wired Relay
Max 100 Ω
T2 °F
C-0 1
2
C-1
5
3
4
Changing of Setpoint Secondary Temperature — —
+ +
OK —
+
T °F
Max 100 Ω
Adjust
Changing of Setpoint Primary Temperature
C-0
C-1 —
—
+ +
Adjust
Press
Wait
OK —
+
Press
Wait
