EURO-FD3 FREnCH DOOR
Superior by Design. E uro - F D 3 F re n ch D oor S y s t em
Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 15472 www.euro-wall.com
SUPERIOR BY DESIGN 888.989.EURO (3876)
S pec i f i ca t i o n s Euro-FD3 FRENCH DOOR Folding Door System
Maximum / Minimum Specifications 240 lbs each panel
Min Panel Width:
12”
Max Panel Width:
40”
Min Panel Height:
32”
Max Panel Height:
120”
Door Thickness:
2-1/4”
Max # of Panels:
Unlimited
NOTE: When using maximum panel width & height 40” x 120” panel may exceed maximum panel weight of 240 lbs. Calculated weight check should be done.
Euro-FD3 Extrusions:
Extruded Aluminum 6063-T5.
Euro-FD3 Extrusion Finishes:
1. a) Clear & b) Bronze anodized Class 1. 2. a) Standard Mill Finish available for custom colors from Euro-Wall. 3. a) White and bronze Kynar Coat finish: D2000-AAMA 2605. 4. a) Custom Powder Coat finishes available D3000-AAMA 2604 and 2605. 5. a) Wood Grain finishes (custom): AAMA 2604.
Euro-FD3 Hardware:
Stainless Steel (316SS) Components with Aluminum hinges.
Euro-FD3 Twinpoint Hardware:
Stainless Steel (304SS) & Aluminum Components.
Euro-FD3 Lever Lock Sets:
F-2 Sets Powder Coat over Brass.
Euro-DSD Multi-point Door Locks: Faceplate, latch and hooks are 304SS.
WARRANTY
Max Panel Weight:
Euro-Wall 10 Year Warranty Euro-Wall offers a complete 10 Year Warranty. Component deletions and/or substitutions are strictly prohibited. Warranty is void if system has missing or substitute products. Please refer to www.euro-wall.com/ for our full warranty information, terms & conditions, returns & allowances, claims policy, and other general information.
3 STANDARD FRAME & DOOR PANEL FINISHES
White
• • • • 1
Clear
Bronze
NOTE: The colors shown in this brochure give only an approximation of color and finish. Actual colors and finishes may vary.
Anodized, Powder Coat or Kynar are available 40 Custom Wood Grain finishes available (not shown) 30 Solid Colors: Custom powder coat finishes available (not showwn) 40 Metallic Custom Powder coat finishes available (not shown) ®
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
F R E N C H door C O N F IG U R A TI O N op t i o n s
Opening FRENCH DOOR configuration
O
X
X
O
O
X
Active LH
X
X
Active RH
NOTE: Please note that the configurations below are just a few examples of the limitless possibilities for Euro-Wall French Door layout options. We also offer a combination of Folding + French Door Systems.
X
Active RH + LH
X
X
O
Active Center + LH + RH
X
X
X
O
X
X
X
X
Active Center + RH
O
X
All Active
O
O
X
Active RH
X
X
All fixed (O) doors are operable and can be opened independently of other doors.
X = Active O = Fixed but operable
X
X
X
X
X
O
O
O
O
Active RH Center + LH Center
O
X
X
X
Active LH + RH + LH + RH
Active LH + LH Center
X
X
X
Active RH Center + LH + LH
Active RH Center + LH Center
X
X
O
X
X
X
X
O
Active RH + RH Center + LH Center + LH
NOTE: Doors can pivot from panels or from jam ©2013 Euro-Wall Systems, LLC • www.euro-wall.com
2
4-1/2”
4-1/2” 1-7/8”
5/64”
5/64” 2-13/32”
1”
5/64”
3-13/32”
13/64”
5/64”
3-13/32”
1-7/32”
2-13/32”
13/64”
1-7/32”
19/32”
19/32” 13-64”
T astragal or MP astragal
PANEL
PANEL
13-64”
T astragal or MP astragal
23/32”
EXTERIOR
INTERIOR
Pile A/B seal applied to top and bottom of astragal
EXTERIOR
9/32” 13-64”
13-64”
13/64”
13/64”
23/32” 25/64”
1”
19/32”
23/32” 2-1/4”
2-1/4”
25/64”
1”
1-5/32” weep holes
INTERIOR
Pile A/B seal applied to top and bottom of astragal
9/32”
19/32”
PANEL
23/32”
PANEL
S ec t i o n C ross
Inswing 1-7/8”
1”
E uro - F D 3
Outswing
1-5/32” weep holes
25/64”
25/64”
Panel to Sill Detail
3
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
E uro - F D 3
Glaz i n g
de t a i ls
0.09”
5/8” 3/16”
1/4”
1/4”
3/16”
Sentryglas® Interlayer
Laminated Monolithic Impact Glass
1” Insulated Glass
Sentryglas® Interlayer 1”
9/16”
Panel Stile
Panel Stile
Top & Bottom Rail
Insulated Impact Glass
Top & Bottom Rail
11/16” Glass Bite 1/8” Tempered 1/4” Annealed
1” O.A. 0.090” Sentryglas®
SUPERIOR by design
1/4” Annealed
19/64” 3/8”
11/16
brushed sweep
finished floor line 19/64”
7/16
brushed sweep
1/2”
3/8”
11/16
7/8”
7/16
Panel to Floor Channel Detail
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
finished floor line
blockout flooring for sill channel
Panel to ADA Sill Detail
finished floor line
4
Features of the euro-FD3 FRENCH Door System NOTE: A, B & C available in white, satin, black & bronze powder coat finishes. SHOWN CONFIGURATION
door panel corner key
O X X O
top pivot
8 6
6 C3 multi-pont astragal
B
4
wall pivot
9 hinge with handle
7 5
1-3
bottom pivot
twinpoint
concealed intermediate guide
lever lock set
A
Door Configuration show with all doors set to the open position
5
11.
All aluminum profiles are available in anodized class 1 acid etch clear & bronze
22.
All aluminum profiles are available in powder coat or WCI coat finishes
33.
Door panels designed for laminated impact and IG and IG impact glass
44.
Twinpoint hardware in stainless steel (304SS)
55.
Door panel corner key for strength and security
66.
Dual weatherstripping on all door panels and frames
77.
6063-T5 aluminum profiles in all Euro-C3 extrusions
88.
Matching color lever lock sets for panels and frame
99.
Stainless steel (304SS) 5 or 6 point MK2 multi-point door lock
A Lever Lock Set
B Twinpoint Handle
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
O p t i o n s
SAMPLE CONFIGURATION
O X X O
All Euro-FD3 configurations have unique INTEGRAL OPERABLE SIDELIGHTS. You can leave the sidelights closed or open regardless of the open or close position(s) of the other french doors.
F INI S H
O P TI O N S
1
2
3
4
White Powder Coat
Satin Aluminum Powder Coat
Clear Anodized
Bronze Anodized
Euro (Aluminum TwinPoint Swing Handle) Finishes
Euro Series Lever Lock Set
Multi-Point Lock
Available Finishes
Available Finishes (Powder Coat over Brass)
Available Finishes (Powder Coat over Brass)
1, 2, 3, 4
NOTE: The colors shown in this brochure give only an approximation of color and finish. Actual colors and finishes may vary.
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
1, 2, 3, 4
1, 2, 3, 4
SUPERIOR by design 6
Tes t P erforma n ce M e t all re q u i reme n t s Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 15472 TAS 201 TAS 202 TAS 203 AAMA / WDMA / CSA 101 / I.S.2 / A440-08 • NAFS-08 Air Infiltration: A2 Water Leakage Resistance: DP70 or PG70 Wind Load Resistance: DP70 to DP100 Wind Zone 4 (Hurricane) ASTM (cycling) E1996: DP100 (C3 H100 Series) Wind Zone 4 (Hurricane) ASTM (impact) E1886: Pass (C3 H100 Series)
SUPERIOR BY DESIGN 888.989.EURO (3876)
Euro-Wall Systems, LLC www.euro-wall.com
• •
Port Charlotte, FL 33980 [email protected]
Proud Member of the American Architectural Manufacturers Association.
Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 15472 www.euro-wall.com
SUPERIOR BY DESIGN 888.989.EURO (3876)
S pec i f i ca t i o n s Euro-FD3 FRENCH DOOR Folding Door System
Maximum / Minimum Specifications 240 lbs each panel
Min Panel Width:
12”
Max Panel Width:
40”
Min Panel Height:
32”
Max Panel Height:
120”
Door Thickness:
2-1/4”
Max # of Panels:
Unlimited
NOTE: When using maximum panel width & height 40” x 120” panel may exceed maximum panel weight of 240 lbs. Calculated weight check should be done.
Euro-FD3 Extrusions:
Extruded Aluminum 6063-T5.
Euro-FD3 Extrusion Finishes:
1. a) Clear & b) Bronze anodized Class 1. 2. a) Standard Mill Finish available for custom colors from Euro-Wall. 3. a) White and bronze Kynar Coat finish: D2000-AAMA 2605. 4. a) Custom Powder Coat finishes available D3000-AAMA 2604 and 2605. 5. a) Wood Grain finishes (custom): AAMA 2604.
Euro-FD3 Hardware:
Stainless Steel (316SS) Components with Aluminum hinges.
Euro-FD3 Twinpoint Hardware:
Stainless Steel (304SS) & Aluminum Components.
Euro-FD3 Lever Lock Sets:
F-2 Sets Powder Coat over Brass.
Euro-DSD Multi-point Door Locks: Faceplate, latch and hooks are 304SS.
WARRANTY
Max Panel Weight:
Euro-Wall 10 Year Warranty Euro-Wall offers a complete 10 Year Warranty. Component deletions and/or substitutions are strictly prohibited. Warranty is void if system has missing or substitute products. Please refer to www.euro-wall.com/ for our full warranty information, terms & conditions, returns & allowances, claims policy, and other general information.
3 STANDARD FRAME & DOOR PANEL FINISHES
White
• • • • 1
Clear
Bronze
NOTE: The colors shown in this brochure give only an approximation of color and finish. Actual colors and finishes may vary.
Anodized, Powder Coat or Kynar are available 40 Custom Wood Grain finishes available (not shown) 30 Solid Colors: Custom powder coat finishes available (not showwn) 40 Metallic Custom Powder coat finishes available (not shown) ®
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
F R E N C H door C O N F IG U R A TI O N op t i o n s
Opening FRENCH DOOR configuration
O
X
X
O
O
X
Active LH
X
X
Active RH
NOTE: Please note that the configurations below are just a few examples of the limitless possibilities for Euro-Wall French Door layout options. We also offer a combination of Folding + French Door Systems.
X
Active RH + LH
X
X
O
Active Center + LH + RH
X
X
X
O
X
X
X
X
Active Center + RH
O
X
All Active
O
O
X
Active RH
X
X
All fixed (O) doors are operable and can be opened independently of other doors.
X = Active O = Fixed but operable
X
X
X
X
X
O
O
O
O
Active RH Center + LH Center
O
X
X
X
Active LH + RH + LH + RH
Active LH + LH Center
X
X
X
Active RH Center + LH + LH
Active RH Center + LH Center
X
X
O
X
X
X
X
O
Active RH + RH Center + LH Center + LH
NOTE: Doors can pivot from panels or from jam ©2013 Euro-Wall Systems, LLC • www.euro-wall.com
2
4-1/2”
4-1/2” 1-7/8”
5/64”
5/64” 2-13/32”
1”
5/64”
3-13/32”
13/64”
5/64”
3-13/32”
1-7/32”
2-13/32”
13/64”
1-7/32”
19/32”
19/32” 13-64”
T astragal or MP astragal
PANEL
PANEL
13-64”
T astragal or MP astragal
23/32”
EXTERIOR
INTERIOR
Pile A/B seal applied to top and bottom of astragal
EXTERIOR
9/32” 13-64”
13-64”
13/64”
13/64”
23/32” 25/64”
1”
19/32”
23/32” 2-1/4”
2-1/4”
25/64”
1”
1-5/32” weep holes
INTERIOR
Pile A/B seal applied to top and bottom of astragal
9/32”
19/32”
PANEL
23/32”
PANEL
S ec t i o n C ross
Inswing 1-7/8”
1”
E uro - F D 3
Outswing
1-5/32” weep holes
25/64”
25/64”
Panel to Sill Detail
3
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
E uro - F D 3
Glaz i n g
de t a i ls
0.09”
5/8” 3/16”
1/4”
1/4”
3/16”
Sentryglas® Interlayer
Laminated Monolithic Impact Glass
1” Insulated Glass
Sentryglas® Interlayer 1”
9/16”
Panel Stile
Panel Stile
Top & Bottom Rail
Insulated Impact Glass
Top & Bottom Rail
11/16” Glass Bite 1/8” Tempered 1/4” Annealed
1” O.A. 0.090” Sentryglas®
SUPERIOR by design
1/4” Annealed
19/64” 3/8”
11/16
brushed sweep
finished floor line 19/64”
7/16
brushed sweep
1/2”
3/8”
11/16
7/8”
7/16
Panel to Floor Channel Detail
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
finished floor line
blockout flooring for sill channel
Panel to ADA Sill Detail
finished floor line
4
Features of the euro-FD3 FRENCH Door System NOTE: A, B & C available in white, satin, black & bronze powder coat finishes. SHOWN CONFIGURATION
door panel corner key
O X X O
top pivot
8 6
6 C3 multi-pont astragal
B
4
wall pivot
9 hinge with handle
7 5
1-3
bottom pivot
twinpoint
concealed intermediate guide
lever lock set
A
Door Configuration show with all doors set to the open position
5
11.
All aluminum profiles are available in anodized class 1 acid etch clear & bronze
22.
All aluminum profiles are available in powder coat or WCI coat finishes
33.
Door panels designed for laminated impact and IG and IG impact glass
44.
Twinpoint hardware in stainless steel (304SS)
55.
Door panel corner key for strength and security
66.
Dual weatherstripping on all door panels and frames
77.
6063-T5 aluminum profiles in all Euro-C3 extrusions
88.
Matching color lever lock sets for panels and frame
99.
Stainless steel (304SS) 5 or 6 point MK2 multi-point door lock
A Lever Lock Set
B Twinpoint Handle
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
O p t i o n s
SAMPLE CONFIGURATION
O X X O
All Euro-FD3 configurations have unique INTEGRAL OPERABLE SIDELIGHTS. You can leave the sidelights closed or open regardless of the open or close position(s) of the other french doors.
F INI S H
O P TI O N S
1
2
3
4
White Powder Coat
Satin Aluminum Powder Coat
Clear Anodized
Bronze Anodized
Euro (Aluminum TwinPoint Swing Handle) Finishes
Euro Series Lever Lock Set
Multi-Point Lock
Available Finishes
Available Finishes (Powder Coat over Brass)
Available Finishes (Powder Coat over Brass)
1, 2, 3, 4
NOTE: The colors shown in this brochure give only an approximation of color and finish. Actual colors and finishes may vary.
©2013 Euro-Wall Systems, LLC • www.euro-wall.com
1, 2, 3, 4
1, 2, 3, 4
SUPERIOR by design 6
Tes t P erforma n ce M e t all re q u i reme n t s Approved for use in Miami-Dade HVHZ Zones Florida Building Code Approved Product Approval FL 15472 TAS 201 TAS 202 TAS 203 AAMA / WDMA / CSA 101 / I.S.2 / A440-08 • NAFS-08 Air Infiltration: A2 Water Leakage Resistance: DP70 or PG70 Wind Load Resistance: DP70 to DP100 Wind Zone 4 (Hurricane) ASTM (cycling) E1996: DP100 (C3 H100 Series) Wind Zone 4 (Hurricane) ASTM (impact) E1886: Pass (C3 H100 Series)
SUPERIOR BY DESIGN 888.989.EURO (3876)
Euro-Wall Systems, LLC www.euro-wall.com
• •
Port Charlotte, FL 33980 [email protected]
Proud Member of the American Architectural Manufacturers Association.
