F4 Helmet Vent
F4 Helmet Vent Replacement Instructions
4.
1.
Clean helmet surface of broken vent fin area with soap and water. Wipe dry with cloth.
If broken vent fin support posts remain in helmet, use pliers to remove broken vent fin support post or use small screw driver to push broken vent fin support down into helmet.
2.
5.
Make sure holes for support posts are now clear.
3.
Peel back red backing to expose adhesive tape on new replacement vent fin.
6.
New replacement vent fin support posts will be slightly too long. Reduce length by cutting approximately half the length of each support post.
Align replacement vent fin support posts with support post holes in helmet. Insert replacement vent fin, apply pressure, and hold until securely attached.
4.
1.
Clean helmet surface of broken vent fin area with soap and water. Wipe dry with cloth.
If broken vent fin support posts remain in helmet, use pliers to remove broken vent fin support post or use small screw driver to push broken vent fin support down into helmet.
2.
5.
Make sure holes for support posts are now clear.
3.
Peel back red backing to expose adhesive tape on new replacement vent fin.
6.
New replacement vent fin support posts will be slightly too long. Reduce length by cutting approximately half the length of each support post.
Align replacement vent fin support posts with support post holes in helmet. Insert replacement vent fin, apply pressure, and hold until securely attached.
