FAE Series - Fabco Air
Catalog FAE-09
Prices effective September 1, 2011
ISO CYLINDERS (ISO 6432 & CETOP RP52P) FAE Series
FAE Series ISO Cylinders
(ISO6432 & CETOP RP52P)
Features
Effective Piston Areas Push
1.
Magnetic piston is standard in all sizes.
150 psi max.
2.
Stainless steel barrel insures long life and corrosion resistance for ø12 to ø25 bores. Anodized aluminum barrel for ø32 to ø40 bores.
3.
Anodized aluminum end covers for corrosion resistance.
4.
Wide range of models allow selection for many applications.
Conversions psi = kgf/cm2 x 14.2 psi= MPa x 145 inch = mm x 0.0394 lb force = N x 0.22 lbf.in = J x 8.85 Force lb = psi X in2 N = lbf X 4.45
5.
Mounting nut furnished on all sizes.
6.
Machined male rod thread with jam nut is standard on all sizes.
7.
ø32 and ø40 bores offered as extended sizes with similar features.
Action Bore (mm) Operating media Min. operating pressure Max. operating pressure Piston speed range Ambient & media temperature Cushion Lubrication Stroke tolerance (mm)
Specifications and prices subject to change without notice or incurring obligation.
Page 2
Bore (mm) Rod Dia (mm) cm2
in2
Pull cm2
in2
12
6
1.1
.17
.8
.13
16
6
2.0
.31
1.7
.26
20
8
3.1
.49
2.6
.40
25
10
4.9
.76
4.1
.63
32
12
8.0 1.25
6.9
1.06
40
16
12.6 1.95 10.6 1.64
Double acting single rod / Double acting double rod ø12, ø16, ø20, ø25, ø32, ø40 Compressed air 0.07Mpa(0.7kgf/cm2)10psi 1.0Mpa(10.5kgf/cm2)150psi ø12~ø25: 50 – 1500mm/sec (1.97-59 in/sec) ø32 & ø40: 50 – 500mm/sec (1.97-19.7 in/sec) –10°C(14°F) ~ +70°C(158°F) filtered dry air required at temperatures below 0°C (32°F) ø12~ø25: Rubber cushion standard ø16 ~ ø25: Air cushion option ø32~ø40: Adjustable air cushion standard None required or use ISO VG32 +1.4 / – 0
10-13-09
FAE Series Construction ISO Cylinders (ISO6432 & CETOP RP52P) ø12~ ø25 Bores Feature stainless steel barrel and rolled assembly with end caps
ø32, ø40 Bores Feature aluminum barrel threaded to end caps
Parts list Magnetic piston & position sensor information (also see page 10) Aluminum alloy (anodized) Aluminum alloy (anodized) Stainless steel / Aluminum
Washer Snap ring Bearing
Hex socket head screw Hex nut 10-20-09
Nitrile - Buna N Nitrile - Buna N Rubber bonded barium ferrite Plated steel Plated steel Stainless steel Plated steel Oil filled bronze Acetal Nitrile - Buna N Carbon steel Carbon steel
• Mounting – Magnetically operated reed switches and electronic sensors can be mounted anywhere along the length and circumference of the cylinder. • Reliability – The annular piston magnet is permanently bonded into a groove in the piston. It is a polarized permanent magnet of rubber bonded barium ferrite that is very stable and is not affected by shock. Under normal usage it will remain magnetized indefinitely. • Warning – External magnetic fields and/or ferrous objects may affect the strength of the piston magnet therefore affecting sensor actuation and piston position indication. • Warning – Do not exceed sensor ratings. Permanent damage to sensor may occur. Power supply polarity MUST be observed for proper operation of sensors. See wiring diagrams included with each sensor.
Page 3
Specifications and prices subject to change without notice or incurring obligation.
FAE Series ISO Cylinders
(ISO6432 & CETOP RP52P)
ø32 & ø40 bores offered as extended sizes with similar features.
20 x 100
FAE Series
Note: Leave blank for standard rubber cushion.
Cushion
*
Bore (mm) Stroke (mm)
Rubber cushion
C (air cushion) is standard feature on ø32 & ø40 bores. (Include in model number.) C is not available on ø12 bore. Add $11.70 to prices on ø16, ø20 & ø25.
Type
C
ø12 ø16
Air cushion both ends
ø20
Foot bracket
10 ~ 200 10 ~ 300
ø25
*
Note: Universal type features threaded nose, threaded rear and rear pivot mounts. Note: Leave blank for universal type.
Universal
ø32 ø40
*
L Front flange
F Rear flange
25 ~ 500
See standard strokes available on page 2. For longer or custom strokes consult factory.
Nose mount
Mounting
P
G S Y
Clevis base bracket and pin Rod clevis and pin
Spherical pherical rod end
Double rod
P
W See individual prices & dimensions on page 11. Option price adders are opposite on page 5.
Magnetic piston is standard in all sizes. Position Sensors Magnetically operated reed switches and electronic sensors can be mounted anywhere along the length and circumference of the cylinder barrel between the end covers.
Ordering Example Cylinders, sensors and accessory items must be ordered as separate line items. (2) Sensor
Order sensors, mounting method and cord sets separately. See page 10. (2) Sensor with 9 foot leadwire (3) Band clamp
(1) Model number FAE 25 x 50 9-2A197 Series – Quick Disconnect Sensor Shown 949 Series – 1/4" Dovetail Sensors
Specifications and prices subject to change without notice or incurring obligation.
Double acting, single rod, Universal type cylinder with 25mm bore and 50mm stroke.
Page 4
(2) Part number 9-2A197-1031 Sourcing PNP electronic sensor with a 9 ft lead wire. See details on page 10. (3) Part number 800-A00-000 Band Clamp for clamp on sensor. See details on page 10. 10-20-09
FAE Series Prices ISO Cylinders Prices – Cylinders
(ISO6432 & CETOP RP52P)
Prices – Cylinders
(Universal & Nose mount "P" type)
Weight Model # (kg) Price FAE12 10 ..... 0.089 ..... $25.25 25 ..... 0.095 ....... 25.85 40 ..... 0.101 ....... 26.70 50 ..... 0.105 ....... 27.30 80 ..... 0.117 ....... 28.75 100 .... 0.125 ....... 29.60 125 .... 0.135 ....... 30.65 160 .... 0.136 ....... 32.15 200 .... 0.146 ....... 33.55 FAE16 10 ..... 0.103 ..... $26.25 25 ..... 0.110 ....... 27.70 40 ..... 0.118 ....... 28.20 50 ..... 0.123 ....... 29.20 80 ..... 0.138 ....... 31.10 100 .... 0.148 ....... 32.15 125 .... 0.160 ....... 33.55 160 .... 0.178 ....... 35.45 200 .... 0.198 ....... 37.50 FAE20 10 ..... 0.187 ..... $28.20 25 ..... 0.199 ....... 29.20 40 ..... 0.211 ....... 30.20 50 ..... 0.219 ....... 31.10 80 ..... 0.242 ....... 33.15 100 .... 0.252 ....... 34.00 125 .... 0.278 ....... 36.05 160 .... 0.306 ....... 38.40 200 .... 0.337 ....... 40.85 250 .... 0.377 ....... 44.20 300 .... 0.416 ....... 47.70 350 .... 0.456 ....... 51.10 400 .... 0.495 ....... 54.45 450 .... 0.535 ....... 57.35 500 .... 0.574 ....... 60.85 FAE25 10 ..... 0.257 ..... $31.65 25 ..... 0.276 ....... 32.55 40 ..... 0.294 ....... 33.55 50 ..... 0.306 ....... 34.00 80 ..... 0.344 ....... 36.50 100 .... 0.368 ....... 37.95 125 .... 0.399 ....... 39.40 160 .... 0.442 ....... 42.75 200 .... 0.491 ....... 44.80 250 .... 0.553 ....... 48.55 300 .... 0.614 ....... 52.10 350 .... 0.676 ....... 55.45 400 .... 0.737 ....... 56.40 450 .... 0.799 ....... 57.35 500 .... 0.860 ....... 66.10
Weight Model # (kg) Price FAEC32 10 ........0.352 ...$63.00 15 ........0.360 .....63.00 20 ........0.368 .....64.80 25 ........0.376 .....64.80 30 ........0.384 .....66.50 40 ........0.400 .....66.50 50 ........0.416 .....68.25 60 ........0.432 .....70.05 75 ........0.456 .....71.75 80 ........0.464 .....71.15 100 ......0.496 .....73.50 125 ......0.536 .....77.00 150 ......0.576 .....82.25 160 ......0.592 .....84.00 175 ......0.616 .....85.80 200 ......0.656 .....89.25 250 ......0.736 .....94.50 300 ......0.816 .....99.75 320 ......0.848 ...103.25 350 ......0.896 ...106.80 400 ......0.976 ...113.75 450 ......1.06 .....143.55 500 ......1.14 .....152.25 FAEC40 10 ........0.598 ...$71.25 15 ........0.611 .....71.75 20 ........0.623 .....73.50 25 ........0.636 .....73.50 30 ........0.649 .....75.30 40 ........0.674 .....75.30 50 ........0.699 .....77.00 60 ........0.724 .....78.75 75 ........0.762 .....80.55 80 ........0.775 .....80.55 100 ......0.825 .....84.00 125 ......0.888 .....89.25 150 ......0.951 .....92.75 160 ......0.976 .....94.50 175 ......1.01 .......96.30 200 ......1.08 .......99.75 250 ......1.20 .....105.00 300 ......1.33 .....110.25 320 ......1.38 .....113.75 350 ......1.46 .....117.30 400 ......1.58 .....124.25 450 ......1.71 .....157.50 500 ......1.83 .....166.25
Weight Model # (kg) Price FAEW12 10 ..... 0.102 .... $35.35 25 ..... 0.112 ...... 36.15 40 ..... 0.121 ...... 37.40 50 ..... 0.127 ...... 38.20 80 ..... 0.146 ...... 40.25 100 ... 0.158 ...... 41.50 125 ... 0.174 ...... 42.90 FAEW16 10 ..... 0.116 .... $36.75 25 ..... 0.127 ...... 38.80 40 ..... 0.138 ...... 39.45 50 ..... 0.145 ...... 40.85 80 ..... 0.167 ...... 43.50 100 ... 0.181 ...... 44.95 125 ... 0.199 ...... 47.00 FAEW20 10 ..... 0.215 .... $39.45 25 ..... 0.233 ...... 40.85 40 ..... 0.250 ...... 42.25 50 ..... 0.262 ...... 43.50 80 ..... 0.297 ...... 46.35 100 ... 0.321 ...... 47.60 125 ... 0.351 ...... 50.45 160 ... 0.392 ...... 53.70 200 ... 0.439 ...... 57.15 250 ... 0.498 ...... 61.90 300 ... 0.557 ...... 66.80 FAEW25 10 ..... 0.304 .... $44.30 25 ..... 0.332 ...... 45.55 40 ..... 0.360 ...... 47.00 50 ..... 0.378 ...... 47.60 80 ..... 0.433 ...... 51.10 100 ... 0.470 ...... 53.15 125 ... 0.516 ...... 55.15 160 ... 0.580 ...... 59.85 200 ... 0.654 ...... 62.70 250 ... 0.746 ...... 68.00 300 ... 0.838 ...... 72.90
Price adder: $11.70 for option "C" air cushions available on ø16~ ø25 bores. Standard on ø32 & ø40 bores. For longer or custom strokes consult factory.
OPTION – Prices
FAE12
"L" for Universal and Double Rod Types –Includes 2 brackets & 2 nuts. “L” for Nose Mount Type1 bracket only. “F” for all Types1 flange only “G” for Universal Type1 flange only. “S” for Universal Type1 clevis bracket and pin.
Weight . . . Price
ACCESSORY – Prices
FAE16
FAE20
Weight . . . Price Weight . . .Price
FAECW40 10 ....0.726 ...$76.05 15 ....0.746 .....76.05 20 ....0.767 .....77.90 25 ....0.787 .....77.90 30 ....0.808 .....79.80 40 ....0.849 .....79.80 50 ....0.890 .....81.65 60 ....0.930 .....83.50 75 ....0.992 .....85.35 80 ....1.01 .......85.35 100 ..1.09 .......89.05 125 ..1.20 .......94.60 150 ..1.30 .......98.35 160 ..1.34 .....100.15 175 ..1.40 .....102.05 200 ..1.50 .....105.75 250 ..1.71 .....111.30 300 ..1.91 .....116.85 320 ..2.00 .....120.60 350 ..2.12 .....124.30 400 ..2.32 .....131.70 450 ..2.53 .....166.95 500 ..2.73 .....176.25 Price adder: $11.70 for option "C" air cushions available on ø16~ ø25 bores. Standard on ø32 & ø40 bores. For longer or custom strokes consult factory. FAEC32
FAEC40
Weight . . . Price Weight . . . Price Weight . . . Price
0.105. . . . . . $4.55
0.210. . . . . $5.25
0.210 . . . . . $5.25
0.24 . . . . . . $6.30
0.45 . . . . . . . $7.70
0.04 . . . . . . 2.30
0.04 . . . . . . 2.30
0.095. . . . . .2.65
0.095 . . . . . .2.65
0.11 . . . . . . . 3.15
0.2 . . . . . . . 3.90
0.025 . . . . . 2.30
0.025. . . . . . 2.30
0.09 . . . . . .2.65
0.09. . . . . . .2.65
0.11 . . . . . . . 3.90
0.2 . . . . . . . 6.50
0.025 . . . . . 2.30
0.025. . . . . . 2.30
0.09 . . . . . .2.65
0.09. . . . . . .2.65
0.11 . . . . . . . 3.90
0.2 . . . . . . . 6.50
0.04 . . . . . . 4.75
0.04 . . . . . . 4.75
0.085. . . . . .5.45
0.085 . . . . . .5.45
0.16 . . . . . . 10.85
0.3 . . . . . . . 11.40
FAE12
FAE16
FAE20
FAE25
FAEC32
FAEC40
Weight . . . Price Weight . . . Price Weight . . . Price
0.02 . . . . . . $5.50
0.02 . . . . . . $5.50
0.05. . . . . . .$6.55
0.10 . . . . . $10.95
0.10. . . . . .$10.95
0.15 . . . . . $13.15
0.025. . . . . . 12.95
0.025. . . . . . 12.95
0.045 . . . . . .13.65
0.07 . . . . . . 15.95
0.07. . . . . . 15.95
0.11 . . . . . . 18.20
All weights are estimates .(kg) 8-11-11
Weight Model # (kg) Price FAECW32 10 ....0.422 ...$66.80 15 ....0.435 .....66.80 20 ....0.447 .....68.65 25 ....0.460 .....68.65 30 ....0.472 .....70.50 40 ....0.497 .....70.50 50 ....0.522 .....72.35 60 ....0.547 .....74.25 75 ....0.584 .....76.05 80 ....0.596 .....76.05 100 ..0.646 .....77.90 125 ..0.708 .....81.65 150 ..0.771 .....87.20 160 ..0.795 .....89.05 175 ..0.832 .....90.95 200 ..0.894 .....94.60 250 ..1.01 .....100.15 300 ..1.14 .....105.75 320 ..1.19 .....109.45 350 ..1.27 .....113.20 400 ..1.40 .....120.60 450 ..1.52 .....152.15 500 ..1.64 .....161.40
0.105 . . . . . $4.55
Weight . . . Price Weight . . . Price Weight . . . Price “Y” for all TypesRod clevis and pin. “P” for all TypesSpherical rod end.
FAE25
(Double Rod 'W" type )
See individual parts and accessory prices & dimensions on page 11. Page 5
Specifications and prices subject to change without notice or incurring obligation.
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) KV
Universal Type Basic Model ø12~ ø25 Bores
BE
XC + Stroke
G1
WH
G Flats x J Length SW
Features threaded nose, threaded rear & rear pivot mounts.
øNDh8
G2
øNDh8 EE
EE
øD
BE
KK NA T
øC
F
K
øCDH9
U
KW
AM
EWd13
N2
N1
H
NA
F
S + Stroke Z + Stroke
RR
ZZ + Stroke
Universal Type Air Cushion Model ø16~ ø25 Bores Dimensions are in (_ _)
XC + Stroke WA
WA1
G1
G2
Air cushion adjuster WB
øC
AM
N1
N2 S + Stroke
Z + Stroke ZZ + Stroke
Dimensions in (_ _) are for Air Cushion Models
Bore AM
BE
øC øCD øD
EE
EW F G G1 G2 WA WA1 WB H J K 8
6
–
–
ZZ
38 – 5 M6x1.0 24 8 18.3 12.5 10.5 16 14 50 10 5 9 22 75 91 105
Ø12 16 M16x1.5
6
6 19.7 M5x0.8 12 17 –
Ø16 16 M16x1.5
6
6 19.8 M5x0.8 12 17 –
Ø20 20 M22x1.5
8
8 27.9 G 1/8"
6 6 9 9 6.6 38 – 5 M6x1.0 24 8 18 11.5 11.5 16 13 56 10 5 9 22 82 98 111 (5.5) (5.5) 16 20 7 8.5 8.5 13.2 13.2 8 44 6 4 M8x1.25 32 11 24 16.5 16.5 22 17 68 13 7 12 24 95 115 132
Ø25 22 M22x1.5 10
8 33.4 G 1/8"
16 22 9
8
–
KV KW NA N1 N2 øND RR S SW T U WH XC Z
KK
11 12.5 16 10.25 50 6 6 M10x1.25 32 11 30 16.5 20 22 15.5 69.5 17 8 12 28 104 126 141.5
Universal Type Air Cushion Model ø32, ø40 Bores offered as extended sizes with similar features
ZZ + Stroke Z + Stroke S + Stroke XC + Stroke WH
AM KV
G Flats
SW
F T
RR N1
N1 G1
G1 EE
KW
EE
øCD
BE KK
øC
øND EW
BE
J
øND
U
øD
NA
NA
K
Bore AM Ø32 Ø40 Specifications and prices subject to change without notice or incurring obligation.
BE
øC øCD øD EE EW F G G1 J K
KK
KV KW NA N1 øND RR S SW T U WH XC Z
ZZ
22 M24x1.5 12 10 40 1/8PT 16 20 10 9 7 10 M10x1.25 32 10 37 17 24 10 74 17 6 16 30 120 142 152 24 M30x1.5 16 12 49 1/8PT 20 20 13 10 8 9 M12x1.25 41 10 46 18 30 12 84 19 7 16 29 129 153 165 Page 6
10-19-09
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) ø32, ø40 Bores offered as extended sizes with similar features Foot Mount (L)
W
4-ØAB
LT UR
NH XS
Alternate position
LT
AV
TR
LS + Stroke
US AO
XL + Stroke Front Flange Mount (F) & Rear Flange Mount (G)
UR R
TF UF
W
FT WL + Stroke
Rear Pivot Mount (S)
FBH13
FT UR ø12 ~ ø25
4-øFB ø32 & ø40
AE
XC + Stroke øCD
NH
LT
2-øAB Rear Pivot
AO
10-19-09
Page 7
D TR LG
AU
Specifications and prices subject to change without notice or incurring obligation.
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) Nose Mount ø12 ~ ø40 bores Features threaded nose, short overall length.
ø32, ø40 Bores offered as extended sizes with similar features KV SW
WH øND
BE
G1
EE
G2
EE
øD
KK NA øC
T
G Flats x J Length
NA
KW AM
K
N1
F
N2
H
S + Stroke Z + Stroke
Nose Mount Air Cushion Model ø16 ~ ø40 bores
WA
WA1
G1
G3
Air cushion adjuster WB
N2
N1 S + Stroke
Foot Mount (L) W
LT
UR NH
2-ØAB AO
AV
TR
Alternate position
XS
Front Flange Mount (F)
US
UR FBH13
UR R
UF TF
W
4-øFB
FT
ø12 ~ ø25 Specifications and prices subject to change without notice or incurring obligation.
Page 8
ø32 & ø40 10-16-09
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) Double Rod ø12 ~ ø40 bores Features threaded nose at both ends.
ø32, ø40 Bores offered as extended sizes with similar features KV BE SW
WH
G1
WH + Stroke
G1
øNDh8 EE
EE
KK
BE
KK
øD
øC
NA øC
G Flats x J Length AM
KW F
K
N1
WA
NA
F
S + Stroke ZZ + Stroke
H
Double Rod Air Cushion Models ø16 ~ ø40 bores Dimensions are in (_ _)
AM
N1
H + Stroke WB
WA
G1
G1
N1
WB
Air cushion adjuster
N1 S + Stroke ZZ + Stroke
Dimensions in (_ _) are for Air Cushion Models
Foot Mount (L) W
LT
UR NH
LT XS
AV
4-øAB
LS + Stroke XL + Stroke
Front Flange Mount (F)
TR US
AO
UR R
TF UF
4-øFB
FBH13
W
FT
UR
ø32 & ø40 10-19-09
ø12 ~ ø25
Page 9
Specifications and prices subject to change without notice or incurring obligation.
Position Sensors for FAE Series ISO Cylinders (ISO6432 & CETOP RP52P) Dovetail Style Magnetic Position Sensors – Temperature range: –4° to +176°F (–20° to +80C)
Mounting Method #2
Application recommendations: a) Clean cylinder body O.D. with acetone. Remove all oil from surface. b) Do not apply the rail over the crimped body edge. c) Double check positioning of the rail. d) High performance double sided tape offers convenient “peel and stick” but is very aggressive, giving you only one chance. Be careful ! e) Remove protective film from tape and place rail in desired position. f) Firmly press the rail to cylinder body.
Sensor(s) slide into an adhesive backed mounting rail having twin dovetail slots. Sensors are locked with set screws. Rail is supplied with double sided tape affixed.
Encased in a plastic housing, dovetail style sensors are corrosion resistant. 60° wire outlet allows close mounting.
Mounting Method #1
Alternatively, the extruded aluminum rail can be fastened using Loctite® U-05FL urethane adhesive or similar. Follow product manufacturer's recommendations for application.
Sensor is fastened to the cylinder barrel with a band clamp that is not included with sensor and must be ordered separately. Band Clamp Adapter for Dovetail Sensors Part No. 900-300-000 Price: $8.55
Sensor Type Reed (No LED) Reed (LED) Electronic (LED) Electronic (LED)
Dovetail mounting rail must be ordered separately. Order by Part No. “ER – length” where the length is known, or by “ER – cylinder model no.” Example: “ER-FAE 25 x 25” the model number of cylinder allows factory to determine the length needed. (Estimated length for pricing purposes is “stroke + 1") Price: $3.10 + $1.10 per inch length.
Sensor slides into extruded aluminum rail and is locked in place with a screw.
Dovetail Style Sensor Selection Guide Electrical Characteristics
Prewired 9 ft. Leadwire Part No. Price
Quick Disconnect* Part No. Price
0-120 VDC/VAC, 0.5 Amp Max current, 5 Watt Max, 0 Voltage Drop 5-120 VDC/VAC, 0.03 Amp Max current, 4 Watt Max, 2.0 Voltage Drop Sourcing PNP 6-24 VDC, 0.20 Amp Max current, 0.5 Voltage Drop Sinking NPN 6-24 VDC, 0.20 Amp Max current, 0.5 Voltage Drop
949-000-001 . . . . $18.95 949-000-002 . . . . . 19.80 949-000-031 . . . . . 25.00 949-000-032 . . . . . 25.00
949-000-301 ..... $26.95 949-000-302 ...... 27.60 949-000-331 ....... 32.85 949-000-332 ....... 32.85
*Note: Quick disconnect styles are supplied with 6 inch pigtail with male connector. Order female cordsets separately from chart below. Clamp-on Style Magnetic Position Sensors – Temperature range: –4° to +176°F (–20° to +80C) Available in pre-wired and quick-disconnect styles Prewired style sensors are supplied with a 9 foot leadwire.
r5 1, 2 o able C Meter
*Quick disconnect style sensors are supplied with male connector. Order female cordsets separately from the first chart below.
Band Clamp for Clamp On Sensors (must be ordered separately) Part No. 800-A00-000 Price: $8.10
r Sensoil Pigta
34 (1.34)
32 (1.26)
9.8 (.39)
Female Cordsets for Quick Disconnect Sensors Cordset Length Part No. Price 1 Meter 2 Meters 5 Meters
Clamp on Style Sensor Selection Guide Sensor Type Electrical Characteristics
CFC-1M CFC-2M CFC-5M
$15.05 16.85 21.30
Prewired 9 ft. Leadwire Quick Disconnect* Part No. Price Part No. Price
Reed (LED) 5-120 VAC/VDC, 0.5 AMP Max, 10 Watt Max, SPST N.O. 3.5 voltage drop 9-2A197-1003. . . .$31.40 Electronic (LED) Sourcing, PNP, 6-24 VDC, 0.5 Amp Max, 1.0 voltage drop 9-2A197-1031. . . . .33.65 Electronic (LED) Sinking, NPN, 6-24 VDC, 0.5 Amp Max, 1.0 voltage drop 9-2A197-1032. . . . .33.65 Specifications and prices subject to change without notice or incurring obligation.
8.5 (.33)
Page 10
9-2A197-1303 .....$40.45 9-2A197-1331 .......43.15 9-2A197-1332 .......43.15 8-25-11
Accessories for FAE Series ISO Cylinders (ISO6432 & CETOP RP52P) Rod clevis and pin (Y) ISO 8140 G B
H
ØF I
I
C D
A
E ØJ
Spherical rod end (P) DIN 648 DIN 24335
X Flats
Prices – Individual Parts & Accessories Foot bracket
Bore ø12, ø16 ø20, ø25 ø32 ø40
Part No. . . . . Price FAE 12-052 . . $2.30 FAE 20-052 . . .2.65 FAE 32-052 . . .3.15 FAE 40-052 . . .3.90
Front flange Rear flange Bore ø12, ø16 ø20, ø25 ø32 ø40
Part No. . . . . Price FAE 12-053 . . $2.30 FAE 20-053 . . 2.65 FAE 32-053 . . 3.90 FAE 40-053 . . 6.50
Spherical rod end Bore . . . . Part No. . . . . Price ø12, ø16 . . . FAE 12-061 . . . $12.95 ø20 . . . . . FAE 20-061 . . . . 13.65 ø25, ø32 . . . FAE 25-061 . . . . 15.95 ø40 . . . . . FAE 40-061 . . . . 18.20
Clevis base bracket and pin Bore ø12, ø16 ø20, ø25 ø32 ø40
Part No. . . . FAE 12-062A FAE 20-062A FAE 32-062A FAE 40-062A
Nose mount nut Bore . . . . Part No. ø12, ø16 . . . FAE 12-040 ø20, ø25 . . . FAE 20-040 ø32 . . . . . FAE 32-040 ø40 . . . . . FAE 40-040
Thread . . . . Size.. . . . Price . . . M16x1.5. . . $1.25 . . . M22x1.5. . . . 1.40 . . . M24x1.5. . . . 1.60 . . . M30x1.5. . . . 2.30
Rod clevis and pin Price $4.75 5.45 10.85 11.40
Bore . . . . . .Part No. . . . . . . Price ø12, ø16. . . FAE 12-057A . . . . $5.50 ø20. . . . . FAE 20-057A . . . . . 6.55 ø25, ø32. . . FAE 25-057A . . . . 10.95 ø40. . . . . FAE 40-057A . . . . 13.15
Rod nut Thread Bore . . . . Part No. . . . . .Size. . . . . Price ø12, ø16 . . . FAE 12-140 . . . .M6x1.0 . . . $0.35 ø20 . . . . . FAE 20-140 . . . M8x1.25. . . . 0.55 ø25, ø32 . . . FAE 25-140 . . .M10x1.25 . . . 0.55 ø40 . . . . . FAE 40-140 . . .M12x1.25 . . . 0.90
For dimensions not shown, see pages 6, 7, 8 and 9.
9-19-11
Page 11
Specifications and prices subject to change without notice or incurring obligation.
Fabco-Air Product Catalog Library
Check out these new product lines today !
Cylinders, Valves and Accessories Catalog #CV9
Pancake® II Air Cylinders Catalog Pan2-2
Square Pancake® II Air Cylinders Catalog # SqPan2
ISO SO 6431 C Cylinders ylinders Catalog # FAQR-09
Twin Twiin Rod, Rodd N Non-Rotating on R Rotatin i gA Ai Air ir Cylinders - Catalog # FDF-09 and Catalog # FDXS-09
Multi-Power® Air Presses Catalog # FP16
Li Linear Slides - 6 FFamilies Slid ili Catalog # LS-03
Pneumatic Grippers, Parallel Jaw and Angular Motion - Catalog # GR-8
Pneumatic Angular P ti A l Motion Grippers Catalog # FKA-09
Rotary Actuators, Pneumatic R t A t t P ti Catalog # FRA.C-09
Interchangeable NFPA Air Cylinders Catalog # NF-6
Global Series™ Metric Air Cylinders - Catalog # GC-15
Swing Clamps Bulletin # SC-DB04
Manifold Solenoid Valves M if ld S l id V l Catalog # FVS.Y-09
Air Pilot & Solenoid Valves Catalog # FVA.E-09
Modular Air Preparation System - FRLs Catalog # FRL-06
Specialty & Control Valves Catalog # 14CAN
Stopper Cylinders Catalog # ST-SC
Stainless Steel Body Air Cylinders Catalog # SSB-03
Pneumatic & Hydraulic Swing Clamps Catalog # FML.H
Fabco-Air, Inc. ■ 3716 N.E. 49th Avenue ■ Gainesville, FL 32609-1699 ■ Telephone (352) 373-3578 ■ Fax (352) 375-8024 ■ E-Mail [email protected] ■ Web Site http://www.fabco-air.com 12-1-09
Prices effective September 1, 2011
ISO CYLINDERS (ISO 6432 & CETOP RP52P) FAE Series
FAE Series ISO Cylinders
(ISO6432 & CETOP RP52P)
Features
Effective Piston Areas Push
1.
Magnetic piston is standard in all sizes.
150 psi max.
2.
Stainless steel barrel insures long life and corrosion resistance for ø12 to ø25 bores. Anodized aluminum barrel for ø32 to ø40 bores.
3.
Anodized aluminum end covers for corrosion resistance.
4.
Wide range of models allow selection for many applications.
Conversions psi = kgf/cm2 x 14.2 psi= MPa x 145 inch = mm x 0.0394 lb force = N x 0.22 lbf.in = J x 8.85 Force lb = psi X in2 N = lbf X 4.45
5.
Mounting nut furnished on all sizes.
6.
Machined male rod thread with jam nut is standard on all sizes.
7.
ø32 and ø40 bores offered as extended sizes with similar features.
Action Bore (mm) Operating media Min. operating pressure Max. operating pressure Piston speed range Ambient & media temperature Cushion Lubrication Stroke tolerance (mm)
Specifications and prices subject to change without notice or incurring obligation.
Page 2
Bore (mm) Rod Dia (mm) cm2
in2
Pull cm2
in2
12
6
1.1
.17
.8
.13
16
6
2.0
.31
1.7
.26
20
8
3.1
.49
2.6
.40
25
10
4.9
.76
4.1
.63
32
12
8.0 1.25
6.9
1.06
40
16
12.6 1.95 10.6 1.64
Double acting single rod / Double acting double rod ø12, ø16, ø20, ø25, ø32, ø40 Compressed air 0.07Mpa(0.7kgf/cm2)10psi 1.0Mpa(10.5kgf/cm2)150psi ø12~ø25: 50 – 1500mm/sec (1.97-59 in/sec) ø32 & ø40: 50 – 500mm/sec (1.97-19.7 in/sec) –10°C(14°F) ~ +70°C(158°F) filtered dry air required at temperatures below 0°C (32°F) ø12~ø25: Rubber cushion standard ø16 ~ ø25: Air cushion option ø32~ø40: Adjustable air cushion standard None required or use ISO VG32 +1.4 / – 0
10-13-09
FAE Series Construction ISO Cylinders (ISO6432 & CETOP RP52P) ø12~ ø25 Bores Feature stainless steel barrel and rolled assembly with end caps
ø32, ø40 Bores Feature aluminum barrel threaded to end caps
Parts list Magnetic piston & position sensor information (also see page 10) Aluminum alloy (anodized) Aluminum alloy (anodized) Stainless steel / Aluminum
Washer Snap ring Bearing
Hex socket head screw Hex nut 10-20-09
Nitrile - Buna N Nitrile - Buna N Rubber bonded barium ferrite Plated steel Plated steel Stainless steel Plated steel Oil filled bronze Acetal Nitrile - Buna N Carbon steel Carbon steel
• Mounting – Magnetically operated reed switches and electronic sensors can be mounted anywhere along the length and circumference of the cylinder. • Reliability – The annular piston magnet is permanently bonded into a groove in the piston. It is a polarized permanent magnet of rubber bonded barium ferrite that is very stable and is not affected by shock. Under normal usage it will remain magnetized indefinitely. • Warning – External magnetic fields and/or ferrous objects may affect the strength of the piston magnet therefore affecting sensor actuation and piston position indication. • Warning – Do not exceed sensor ratings. Permanent damage to sensor may occur. Power supply polarity MUST be observed for proper operation of sensors. See wiring diagrams included with each sensor.
Page 3
Specifications and prices subject to change without notice or incurring obligation.
FAE Series ISO Cylinders
(ISO6432 & CETOP RP52P)
ø32 & ø40 bores offered as extended sizes with similar features.
20 x 100
FAE Series
Note: Leave blank for standard rubber cushion.
Cushion
*
Bore (mm) Stroke (mm)
Rubber cushion
C (air cushion) is standard feature on ø32 & ø40 bores. (Include in model number.) C is not available on ø12 bore. Add $11.70 to prices on ø16, ø20 & ø25.
Type
C
ø12 ø16
Air cushion both ends
ø20
Foot bracket
10 ~ 200 10 ~ 300
ø25
*
Note: Universal type features threaded nose, threaded rear and rear pivot mounts. Note: Leave blank for universal type.
Universal
ø32 ø40
*
L Front flange
F Rear flange
25 ~ 500
See standard strokes available on page 2. For longer or custom strokes consult factory.
Nose mount
Mounting
P
G S Y
Clevis base bracket and pin Rod clevis and pin
Spherical pherical rod end
Double rod
P
W See individual prices & dimensions on page 11. Option price adders are opposite on page 5.
Magnetic piston is standard in all sizes. Position Sensors Magnetically operated reed switches and electronic sensors can be mounted anywhere along the length and circumference of the cylinder barrel between the end covers.
Ordering Example Cylinders, sensors and accessory items must be ordered as separate line items. (2) Sensor
Order sensors, mounting method and cord sets separately. See page 10. (2) Sensor with 9 foot leadwire (3) Band clamp
(1) Model number FAE 25 x 50 9-2A197 Series – Quick Disconnect Sensor Shown 949 Series – 1/4" Dovetail Sensors
Specifications and prices subject to change without notice or incurring obligation.
Double acting, single rod, Universal type cylinder with 25mm bore and 50mm stroke.
Page 4
(2) Part number 9-2A197-1031 Sourcing PNP electronic sensor with a 9 ft lead wire. See details on page 10. (3) Part number 800-A00-000 Band Clamp for clamp on sensor. See details on page 10. 10-20-09
FAE Series Prices ISO Cylinders Prices – Cylinders
(ISO6432 & CETOP RP52P)
Prices – Cylinders
(Universal & Nose mount "P" type)
Weight Model # (kg) Price FAE12 10 ..... 0.089 ..... $25.25 25 ..... 0.095 ....... 25.85 40 ..... 0.101 ....... 26.70 50 ..... 0.105 ....... 27.30 80 ..... 0.117 ....... 28.75 100 .... 0.125 ....... 29.60 125 .... 0.135 ....... 30.65 160 .... 0.136 ....... 32.15 200 .... 0.146 ....... 33.55 FAE16 10 ..... 0.103 ..... $26.25 25 ..... 0.110 ....... 27.70 40 ..... 0.118 ....... 28.20 50 ..... 0.123 ....... 29.20 80 ..... 0.138 ....... 31.10 100 .... 0.148 ....... 32.15 125 .... 0.160 ....... 33.55 160 .... 0.178 ....... 35.45 200 .... 0.198 ....... 37.50 FAE20 10 ..... 0.187 ..... $28.20 25 ..... 0.199 ....... 29.20 40 ..... 0.211 ....... 30.20 50 ..... 0.219 ....... 31.10 80 ..... 0.242 ....... 33.15 100 .... 0.252 ....... 34.00 125 .... 0.278 ....... 36.05 160 .... 0.306 ....... 38.40 200 .... 0.337 ....... 40.85 250 .... 0.377 ....... 44.20 300 .... 0.416 ....... 47.70 350 .... 0.456 ....... 51.10 400 .... 0.495 ....... 54.45 450 .... 0.535 ....... 57.35 500 .... 0.574 ....... 60.85 FAE25 10 ..... 0.257 ..... $31.65 25 ..... 0.276 ....... 32.55 40 ..... 0.294 ....... 33.55 50 ..... 0.306 ....... 34.00 80 ..... 0.344 ....... 36.50 100 .... 0.368 ....... 37.95 125 .... 0.399 ....... 39.40 160 .... 0.442 ....... 42.75 200 .... 0.491 ....... 44.80 250 .... 0.553 ....... 48.55 300 .... 0.614 ....... 52.10 350 .... 0.676 ....... 55.45 400 .... 0.737 ....... 56.40 450 .... 0.799 ....... 57.35 500 .... 0.860 ....... 66.10
Weight Model # (kg) Price FAEC32 10 ........0.352 ...$63.00 15 ........0.360 .....63.00 20 ........0.368 .....64.80 25 ........0.376 .....64.80 30 ........0.384 .....66.50 40 ........0.400 .....66.50 50 ........0.416 .....68.25 60 ........0.432 .....70.05 75 ........0.456 .....71.75 80 ........0.464 .....71.15 100 ......0.496 .....73.50 125 ......0.536 .....77.00 150 ......0.576 .....82.25 160 ......0.592 .....84.00 175 ......0.616 .....85.80 200 ......0.656 .....89.25 250 ......0.736 .....94.50 300 ......0.816 .....99.75 320 ......0.848 ...103.25 350 ......0.896 ...106.80 400 ......0.976 ...113.75 450 ......1.06 .....143.55 500 ......1.14 .....152.25 FAEC40 10 ........0.598 ...$71.25 15 ........0.611 .....71.75 20 ........0.623 .....73.50 25 ........0.636 .....73.50 30 ........0.649 .....75.30 40 ........0.674 .....75.30 50 ........0.699 .....77.00 60 ........0.724 .....78.75 75 ........0.762 .....80.55 80 ........0.775 .....80.55 100 ......0.825 .....84.00 125 ......0.888 .....89.25 150 ......0.951 .....92.75 160 ......0.976 .....94.50 175 ......1.01 .......96.30 200 ......1.08 .......99.75 250 ......1.20 .....105.00 300 ......1.33 .....110.25 320 ......1.38 .....113.75 350 ......1.46 .....117.30 400 ......1.58 .....124.25 450 ......1.71 .....157.50 500 ......1.83 .....166.25
Weight Model # (kg) Price FAEW12 10 ..... 0.102 .... $35.35 25 ..... 0.112 ...... 36.15 40 ..... 0.121 ...... 37.40 50 ..... 0.127 ...... 38.20 80 ..... 0.146 ...... 40.25 100 ... 0.158 ...... 41.50 125 ... 0.174 ...... 42.90 FAEW16 10 ..... 0.116 .... $36.75 25 ..... 0.127 ...... 38.80 40 ..... 0.138 ...... 39.45 50 ..... 0.145 ...... 40.85 80 ..... 0.167 ...... 43.50 100 ... 0.181 ...... 44.95 125 ... 0.199 ...... 47.00 FAEW20 10 ..... 0.215 .... $39.45 25 ..... 0.233 ...... 40.85 40 ..... 0.250 ...... 42.25 50 ..... 0.262 ...... 43.50 80 ..... 0.297 ...... 46.35 100 ... 0.321 ...... 47.60 125 ... 0.351 ...... 50.45 160 ... 0.392 ...... 53.70 200 ... 0.439 ...... 57.15 250 ... 0.498 ...... 61.90 300 ... 0.557 ...... 66.80 FAEW25 10 ..... 0.304 .... $44.30 25 ..... 0.332 ...... 45.55 40 ..... 0.360 ...... 47.00 50 ..... 0.378 ...... 47.60 80 ..... 0.433 ...... 51.10 100 ... 0.470 ...... 53.15 125 ... 0.516 ...... 55.15 160 ... 0.580 ...... 59.85 200 ... 0.654 ...... 62.70 250 ... 0.746 ...... 68.00 300 ... 0.838 ...... 72.90
Price adder: $11.70 for option "C" air cushions available on ø16~ ø25 bores. Standard on ø32 & ø40 bores. For longer or custom strokes consult factory.
OPTION – Prices
FAE12
"L" for Universal and Double Rod Types –Includes 2 brackets & 2 nuts. “L” for Nose Mount Type1 bracket only. “F” for all Types1 flange only “G” for Universal Type1 flange only. “S” for Universal Type1 clevis bracket and pin.
Weight . . . Price
ACCESSORY – Prices
FAE16
FAE20
Weight . . . Price Weight . . .Price
FAECW40 10 ....0.726 ...$76.05 15 ....0.746 .....76.05 20 ....0.767 .....77.90 25 ....0.787 .....77.90 30 ....0.808 .....79.80 40 ....0.849 .....79.80 50 ....0.890 .....81.65 60 ....0.930 .....83.50 75 ....0.992 .....85.35 80 ....1.01 .......85.35 100 ..1.09 .......89.05 125 ..1.20 .......94.60 150 ..1.30 .......98.35 160 ..1.34 .....100.15 175 ..1.40 .....102.05 200 ..1.50 .....105.75 250 ..1.71 .....111.30 300 ..1.91 .....116.85 320 ..2.00 .....120.60 350 ..2.12 .....124.30 400 ..2.32 .....131.70 450 ..2.53 .....166.95 500 ..2.73 .....176.25 Price adder: $11.70 for option "C" air cushions available on ø16~ ø25 bores. Standard on ø32 & ø40 bores. For longer or custom strokes consult factory. FAEC32
FAEC40
Weight . . . Price Weight . . . Price Weight . . . Price
0.105. . . . . . $4.55
0.210. . . . . $5.25
0.210 . . . . . $5.25
0.24 . . . . . . $6.30
0.45 . . . . . . . $7.70
0.04 . . . . . . 2.30
0.04 . . . . . . 2.30
0.095. . . . . .2.65
0.095 . . . . . .2.65
0.11 . . . . . . . 3.15
0.2 . . . . . . . 3.90
0.025 . . . . . 2.30
0.025. . . . . . 2.30
0.09 . . . . . .2.65
0.09. . . . . . .2.65
0.11 . . . . . . . 3.90
0.2 . . . . . . . 6.50
0.025 . . . . . 2.30
0.025. . . . . . 2.30
0.09 . . . . . .2.65
0.09. . . . . . .2.65
0.11 . . . . . . . 3.90
0.2 . . . . . . . 6.50
0.04 . . . . . . 4.75
0.04 . . . . . . 4.75
0.085. . . . . .5.45
0.085 . . . . . .5.45
0.16 . . . . . . 10.85
0.3 . . . . . . . 11.40
FAE12
FAE16
FAE20
FAE25
FAEC32
FAEC40
Weight . . . Price Weight . . . Price Weight . . . Price
0.02 . . . . . . $5.50
0.02 . . . . . . $5.50
0.05. . . . . . .$6.55
0.10 . . . . . $10.95
0.10. . . . . .$10.95
0.15 . . . . . $13.15
0.025. . . . . . 12.95
0.025. . . . . . 12.95
0.045 . . . . . .13.65
0.07 . . . . . . 15.95
0.07. . . . . . 15.95
0.11 . . . . . . 18.20
All weights are estimates .(kg) 8-11-11
Weight Model # (kg) Price FAECW32 10 ....0.422 ...$66.80 15 ....0.435 .....66.80 20 ....0.447 .....68.65 25 ....0.460 .....68.65 30 ....0.472 .....70.50 40 ....0.497 .....70.50 50 ....0.522 .....72.35 60 ....0.547 .....74.25 75 ....0.584 .....76.05 80 ....0.596 .....76.05 100 ..0.646 .....77.90 125 ..0.708 .....81.65 150 ..0.771 .....87.20 160 ..0.795 .....89.05 175 ..0.832 .....90.95 200 ..0.894 .....94.60 250 ..1.01 .....100.15 300 ..1.14 .....105.75 320 ..1.19 .....109.45 350 ..1.27 .....113.20 400 ..1.40 .....120.60 450 ..1.52 .....152.15 500 ..1.64 .....161.40
0.105 . . . . . $4.55
Weight . . . Price Weight . . . Price Weight . . . Price “Y” for all TypesRod clevis and pin. “P” for all TypesSpherical rod end.
FAE25
(Double Rod 'W" type )
See individual parts and accessory prices & dimensions on page 11. Page 5
Specifications and prices subject to change without notice or incurring obligation.
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) KV
Universal Type Basic Model ø12~ ø25 Bores
BE
XC + Stroke
G1
WH
G Flats x J Length SW
Features threaded nose, threaded rear & rear pivot mounts.
øNDh8
G2
øNDh8 EE
EE
øD
BE
KK NA T
øC
F
K
øCDH9
U
KW
AM
EWd13
N2
N1
H
NA
F
S + Stroke Z + Stroke
RR
ZZ + Stroke
Universal Type Air Cushion Model ø16~ ø25 Bores Dimensions are in (_ _)
XC + Stroke WA
WA1
G1
G2
Air cushion adjuster WB
øC
AM
N1
N2 S + Stroke
Z + Stroke ZZ + Stroke
Dimensions in (_ _) are for Air Cushion Models
Bore AM
BE
øC øCD øD
EE
EW F G G1 G2 WA WA1 WB H J K 8
6
–
–
ZZ
38 – 5 M6x1.0 24 8 18.3 12.5 10.5 16 14 50 10 5 9 22 75 91 105
Ø12 16 M16x1.5
6
6 19.7 M5x0.8 12 17 –
Ø16 16 M16x1.5
6
6 19.8 M5x0.8 12 17 –
Ø20 20 M22x1.5
8
8 27.9 G 1/8"
6 6 9 9 6.6 38 – 5 M6x1.0 24 8 18 11.5 11.5 16 13 56 10 5 9 22 82 98 111 (5.5) (5.5) 16 20 7 8.5 8.5 13.2 13.2 8 44 6 4 M8x1.25 32 11 24 16.5 16.5 22 17 68 13 7 12 24 95 115 132
Ø25 22 M22x1.5 10
8 33.4 G 1/8"
16 22 9
8
–
KV KW NA N1 N2 øND RR S SW T U WH XC Z
KK
11 12.5 16 10.25 50 6 6 M10x1.25 32 11 30 16.5 20 22 15.5 69.5 17 8 12 28 104 126 141.5
Universal Type Air Cushion Model ø32, ø40 Bores offered as extended sizes with similar features
ZZ + Stroke Z + Stroke S + Stroke XC + Stroke WH
AM KV
G Flats
SW
F T
RR N1
N1 G1
G1 EE
KW
EE
øCD
BE KK
øC
øND EW
BE
J
øND
U
øD
NA
NA
K
Bore AM Ø32 Ø40 Specifications and prices subject to change without notice or incurring obligation.
BE
øC øCD øD EE EW F G G1 J K
KK
KV KW NA N1 øND RR S SW T U WH XC Z
ZZ
22 M24x1.5 12 10 40 1/8PT 16 20 10 9 7 10 M10x1.25 32 10 37 17 24 10 74 17 6 16 30 120 142 152 24 M30x1.5 16 12 49 1/8PT 20 20 13 10 8 9 M12x1.25 41 10 46 18 30 12 84 19 7 16 29 129 153 165 Page 6
10-19-09
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) ø32, ø40 Bores offered as extended sizes with similar features Foot Mount (L)
W
4-ØAB
LT UR
NH XS
Alternate position
LT
AV
TR
LS + Stroke
US AO
XL + Stroke Front Flange Mount (F) & Rear Flange Mount (G)
UR R
TF UF
W
FT WL + Stroke
Rear Pivot Mount (S)
FBH13
FT UR ø12 ~ ø25
4-øFB ø32 & ø40
AE
XC + Stroke øCD
NH
LT
2-øAB Rear Pivot
AO
10-19-09
Page 7
D TR LG
AU
Specifications and prices subject to change without notice or incurring obligation.
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) Nose Mount ø12 ~ ø40 bores Features threaded nose, short overall length.
ø32, ø40 Bores offered as extended sizes with similar features KV SW
WH øND
BE
G1
EE
G2
EE
øD
KK NA øC
T
G Flats x J Length
NA
KW AM
K
N1
F
N2
H
S + Stroke Z + Stroke
Nose Mount Air Cushion Model ø16 ~ ø40 bores
WA
WA1
G1
G3
Air cushion adjuster WB
N2
N1 S + Stroke
Foot Mount (L) W
LT
UR NH
2-ØAB AO
AV
TR
Alternate position
XS
Front Flange Mount (F)
US
UR FBH13
UR R
UF TF
W
4-øFB
FT
ø12 ~ ø25 Specifications and prices subject to change without notice or incurring obligation.
Page 8
ø32 & ø40 10-16-09
FAE Series Dimensions (mm) ISO Cylinders (ISO6432 & CETOP RP52P) Double Rod ø12 ~ ø40 bores Features threaded nose at both ends.
ø32, ø40 Bores offered as extended sizes with similar features KV BE SW
WH
G1
WH + Stroke
G1
øNDh8 EE
EE
KK
BE
KK
øD
øC
NA øC
G Flats x J Length AM
KW F
K
N1
WA
NA
F
S + Stroke ZZ + Stroke
H
Double Rod Air Cushion Models ø16 ~ ø40 bores Dimensions are in (_ _)
AM
N1
H + Stroke WB
WA
G1
G1
N1
WB
Air cushion adjuster
N1 S + Stroke ZZ + Stroke
Dimensions in (_ _) are for Air Cushion Models
Foot Mount (L) W
LT
UR NH
LT XS
AV
4-øAB
LS + Stroke XL + Stroke
Front Flange Mount (F)
TR US
AO
UR R
TF UF
4-øFB
FBH13
W
FT
UR
ø32 & ø40 10-19-09
ø12 ~ ø25
Page 9
Specifications and prices subject to change without notice or incurring obligation.
Position Sensors for FAE Series ISO Cylinders (ISO6432 & CETOP RP52P) Dovetail Style Magnetic Position Sensors – Temperature range: –4° to +176°F (–20° to +80C)
Mounting Method #2
Application recommendations: a) Clean cylinder body O.D. with acetone. Remove all oil from surface. b) Do not apply the rail over the crimped body edge. c) Double check positioning of the rail. d) High performance double sided tape offers convenient “peel and stick” but is very aggressive, giving you only one chance. Be careful ! e) Remove protective film from tape and place rail in desired position. f) Firmly press the rail to cylinder body.
Sensor(s) slide into an adhesive backed mounting rail having twin dovetail slots. Sensors are locked with set screws. Rail is supplied with double sided tape affixed.
Encased in a plastic housing, dovetail style sensors are corrosion resistant. 60° wire outlet allows close mounting.
Mounting Method #1
Alternatively, the extruded aluminum rail can be fastened using Loctite® U-05FL urethane adhesive or similar. Follow product manufacturer's recommendations for application.
Sensor is fastened to the cylinder barrel with a band clamp that is not included with sensor and must be ordered separately. Band Clamp Adapter for Dovetail Sensors Part No. 900-300-000 Price: $8.55
Sensor Type Reed (No LED) Reed (LED) Electronic (LED) Electronic (LED)
Dovetail mounting rail must be ordered separately. Order by Part No. “ER – length” where the length is known, or by “ER – cylinder model no.” Example: “ER-FAE 25 x 25” the model number of cylinder allows factory to determine the length needed. (Estimated length for pricing purposes is “stroke + 1") Price: $3.10 + $1.10 per inch length.
Sensor slides into extruded aluminum rail and is locked in place with a screw.
Dovetail Style Sensor Selection Guide Electrical Characteristics
Prewired 9 ft. Leadwire Part No. Price
Quick Disconnect* Part No. Price
0-120 VDC/VAC, 0.5 Amp Max current, 5 Watt Max, 0 Voltage Drop 5-120 VDC/VAC, 0.03 Amp Max current, 4 Watt Max, 2.0 Voltage Drop Sourcing PNP 6-24 VDC, 0.20 Amp Max current, 0.5 Voltage Drop Sinking NPN 6-24 VDC, 0.20 Amp Max current, 0.5 Voltage Drop
949-000-001 . . . . $18.95 949-000-002 . . . . . 19.80 949-000-031 . . . . . 25.00 949-000-032 . . . . . 25.00
949-000-301 ..... $26.95 949-000-302 ...... 27.60 949-000-331 ....... 32.85 949-000-332 ....... 32.85
*Note: Quick disconnect styles are supplied with 6 inch pigtail with male connector. Order female cordsets separately from chart below. Clamp-on Style Magnetic Position Sensors – Temperature range: –4° to +176°F (–20° to +80C) Available in pre-wired and quick-disconnect styles Prewired style sensors are supplied with a 9 foot leadwire.
r5 1, 2 o able C Meter
*Quick disconnect style sensors are supplied with male connector. Order female cordsets separately from the first chart below.
Band Clamp for Clamp On Sensors (must be ordered separately) Part No. 800-A00-000 Price: $8.10
r Sensoil Pigta
34 (1.34)
32 (1.26)
9.8 (.39)
Female Cordsets for Quick Disconnect Sensors Cordset Length Part No. Price 1 Meter 2 Meters 5 Meters
Clamp on Style Sensor Selection Guide Sensor Type Electrical Characteristics
CFC-1M CFC-2M CFC-5M
$15.05 16.85 21.30
Prewired 9 ft. Leadwire Quick Disconnect* Part No. Price Part No. Price
Reed (LED) 5-120 VAC/VDC, 0.5 AMP Max, 10 Watt Max, SPST N.O. 3.5 voltage drop 9-2A197-1003. . . .$31.40 Electronic (LED) Sourcing, PNP, 6-24 VDC, 0.5 Amp Max, 1.0 voltage drop 9-2A197-1031. . . . .33.65 Electronic (LED) Sinking, NPN, 6-24 VDC, 0.5 Amp Max, 1.0 voltage drop 9-2A197-1032. . . . .33.65 Specifications and prices subject to change without notice or incurring obligation.
8.5 (.33)
Page 10
9-2A197-1303 .....$40.45 9-2A197-1331 .......43.15 9-2A197-1332 .......43.15 8-25-11
Accessories for FAE Series ISO Cylinders (ISO6432 & CETOP RP52P) Rod clevis and pin (Y) ISO 8140 G B
H
ØF I
I
C D
A
E ØJ
Spherical rod end (P) DIN 648 DIN 24335
X Flats
Prices – Individual Parts & Accessories Foot bracket
Bore ø12, ø16 ø20, ø25 ø32 ø40
Part No. . . . . Price FAE 12-052 . . $2.30 FAE 20-052 . . .2.65 FAE 32-052 . . .3.15 FAE 40-052 . . .3.90
Front flange Rear flange Bore ø12, ø16 ø20, ø25 ø32 ø40
Part No. . . . . Price FAE 12-053 . . $2.30 FAE 20-053 . . 2.65 FAE 32-053 . . 3.90 FAE 40-053 . . 6.50
Spherical rod end Bore . . . . Part No. . . . . Price ø12, ø16 . . . FAE 12-061 . . . $12.95 ø20 . . . . . FAE 20-061 . . . . 13.65 ø25, ø32 . . . FAE 25-061 . . . . 15.95 ø40 . . . . . FAE 40-061 . . . . 18.20
Clevis base bracket and pin Bore ø12, ø16 ø20, ø25 ø32 ø40
Part No. . . . FAE 12-062A FAE 20-062A FAE 32-062A FAE 40-062A
Nose mount nut Bore . . . . Part No. ø12, ø16 . . . FAE 12-040 ø20, ø25 . . . FAE 20-040 ø32 . . . . . FAE 32-040 ø40 . . . . . FAE 40-040
Thread . . . . Size.. . . . Price . . . M16x1.5. . . $1.25 . . . M22x1.5. . . . 1.40 . . . M24x1.5. . . . 1.60 . . . M30x1.5. . . . 2.30
Rod clevis and pin Price $4.75 5.45 10.85 11.40
Bore . . . . . .Part No. . . . . . . Price ø12, ø16. . . FAE 12-057A . . . . $5.50 ø20. . . . . FAE 20-057A . . . . . 6.55 ø25, ø32. . . FAE 25-057A . . . . 10.95 ø40. . . . . FAE 40-057A . . . . 13.15
Rod nut Thread Bore . . . . Part No. . . . . .Size. . . . . Price ø12, ø16 . . . FAE 12-140 . . . .M6x1.0 . . . $0.35 ø20 . . . . . FAE 20-140 . . . M8x1.25. . . . 0.55 ø25, ø32 . . . FAE 25-140 . . .M10x1.25 . . . 0.55 ø40 . . . . . FAE 40-140 . . .M12x1.25 . . . 0.90
For dimensions not shown, see pages 6, 7, 8 and 9.
9-19-11
Page 11
Specifications and prices subject to change without notice or incurring obligation.
Fabco-Air Product Catalog Library
Check out these new product lines today !
Cylinders, Valves and Accessories Catalog #CV9
Pancake® II Air Cylinders Catalog Pan2-2
Square Pancake® II Air Cylinders Catalog # SqPan2
ISO SO 6431 C Cylinders ylinders Catalog # FAQR-09
Twin Twiin Rod, Rodd N Non-Rotating on R Rotatin i gA Ai Air ir Cylinders - Catalog # FDF-09 and Catalog # FDXS-09
Multi-Power® Air Presses Catalog # FP16
Li Linear Slides - 6 FFamilies Slid ili Catalog # LS-03
Pneumatic Grippers, Parallel Jaw and Angular Motion - Catalog # GR-8
Pneumatic Angular P ti A l Motion Grippers Catalog # FKA-09
Rotary Actuators, Pneumatic R t A t t P ti Catalog # FRA.C-09
Interchangeable NFPA Air Cylinders Catalog # NF-6
Global Series™ Metric Air Cylinders - Catalog # GC-15
Swing Clamps Bulletin # SC-DB04
Manifold Solenoid Valves M if ld S l id V l Catalog # FVS.Y-09
Air Pilot & Solenoid Valves Catalog # FVA.E-09
Modular Air Preparation System - FRLs Catalog # FRL-06
Specialty & Control Valves Catalog # 14CAN
Stopper Cylinders Catalog # ST-SC
Stainless Steel Body Air Cylinders Catalog # SSB-03
Pneumatic & Hydraulic Swing Clamps Catalog # FML.H
Fabco-Air, Inc. ■ 3716 N.E. 49th Avenue ■ Gainesville, FL 32609-1699 ■ Telephone (352) 373-3578 ■ Fax (352) 375-8024 ■ E-Mail [email protected] ■ Web Site http://www.fabco-air.com 12-1-09
