Features - Fortune Energy
TRIO
PVi-10.0-i GENERAL SPECIFICATIONS OUTDOOR MODELS
-S1 version
Designed for commercial usage, this three-phase inverter is highly unique in its ability to control the performance of the PV panels, especially during periods of variable weather conditions. This device has two independent MPPTs and efficiency ratings of up to 97.3%. The input voltage range makes the inverter suitable to installations with reduced string size. The HF isolation allows positive or negative ground configuration. It is available with an optional fully-integrated DC combiner box equipped with DC or AC and DC disconnect switches and DC fuses. The unit is free of electrolytic capacitors, leading to a longer product lifetime and reliability.
Features
-S2 version
• High speed and precise MPPT algorithm for real time power tracking and improved energy harvesting • Flat efficiency curves ensure high efficiency at all output levels ensuring consistent and stable performance across the entire input voltage and output power range • ‘Electrolyte-free’ power converter to further increase the life expectancy and long term reliability • True three-phase bridge topology for DC/AC output converter • Night wake up button to access energy harvesting data and error log when inverter is sleeping • Dual input sections with independent MPPT, allows optimal energy harvesting from two sub-arrays oriented in different directions • NEMA 4X outdoor enclosure for unrestricted use under any environmental conditions • Integrated combiner box equipped with a DC switch in compliance with international standards (-S1,-S2) • RS-485 communication interface (for connection to laptop or datalogger) • Compatible with PVI-RADIOMODULE for wireless communication with Aurora PVI-DESKTOP AURORAAURORA TRIO UNO 1
BlOcK DiaGRaM OF PVi-10.0-i FOR nORTh aMeRica
MPPT 1 (DC/DC)
IN1.1(+) +
+
HF TRANSFORMER
For 208Vac and 600Vac both 3-wire and 4-wire AC Grid Connections are allowed. For 480Vac 4-wire AC Grid Connection is required.
INVERTER (DC/AC)
BULK CAPS
IN1.2(+) IN1
IN1 IN1.1(-)
LINE FILTER -
GRID PARALLEL RELAY
-
IN1.2(-)
MPPT 2 (DC/DC)
IN2.1(+) IN1.2(+)
+
+
L1
L1, S
L2
L2
L2, S
L3
L3
L3, S
N
N
-
-
STANDARD VERSION
RS485 IN1.1(+)
+ T/R - T/R
IN1.2(+)
(1)
RTN
+
(1)
-
IN1.2(-)
DC/AC DSP CONTR.
DC/DC DSP CONTR.
IN1 IN1.1(-)
GROUND FAULT DETECTION
REMOTE CONTROL +R -R
µP
ALARM N.C
IN1.3(-)
N.O C
IN2.1(+) CONTROL CIRCUIT
IN2.2(+) IN2.3(+)
(1)
+
(1) IN2
IN2.1(-)
-
IN2.2(-) IN2.3(-)
-S1 / -S2 VERSION
(1) if -PG version switch and fuses are on negative polarity.
Block Diagram and Efficiency Curves
PVi-10.0-i* 100 99 98 97
Efficiency, %
96 95 94 93 220 Vdc
92
362 Vdc
91
416 Vdc
90
* Efficiency shown for inverters operating at 480Vac
2
AURORA TRIO
PE
-S2 VERSION
IN2.2(-)
IN1.3(+)
N, S
PE
IN2
IN2 IN2.1(-)
HF TRANSFORMER
L1
0%
10%
20%
30%
40%
50%
60%
% of Rated Output Power
70%
80%
90%
100%
Technical Data Nominal Output Power Maximum Output Power Rated Grid AC Voltage Input Side (DC) Number of Independent MPPT Channels Maximum Usable Power for Each Channel Absolute Maximum Voltage (Vmax) Start- Up Voltage (Vstart) Full Power MPPT Voltage Range Operating MPPT Voltage Range Maximum Current (Idcmax) for both MPPT in Parallel Maximum Usable Current per Channel Maximum Short Circuit Current Limit per Channel Number of Wire Landing Terminals per Channel Array Wiring Termination Type Output Side (AC)
Values W W V W V V V V A A A
Grid Connection Type Adjustable Voltage Range (Vmin-Vmax) Grid Frequency Adjustable Grid Frequency Range Maximum Current (Iac max) Power Factor Total Harmonic Distortion At Rated Power Grid Wiring Termination Type Protection Devices Input Reverse Polarity Protection Over-Voltage Protection Type PV Array Ground Fault Detection Output Anti-Islanding Protection
V Hz Hz ARMS %
Over-Voltage Protection Type Efficiency Maximum Efficiency CEC Efficiency Operating Parameters Feed-In Power Threshold Stand-by Consumption Communication User-Interface (Display) Remote Monitoring (1xRS485 incl.) Wired Local Monitoring (1xRS485 incl.) Wireless Local Monitoring Environmental Ambient Air Operating Temperature Range Ambient Air Storage Temperature Range Relative Humidity Acoustic Noise Emission Level Maximum Operating Altitude without Derating Mechanical Specifications Enclosure rating Cooling Dimensions (H x W x D) Unit Weight Shipping Weight Conduit Connections Mounting System Ground Fault Detector Fuse Size/ Type Optional String Combiner Fuse Size/Type DC Switch Current Rating (Per Contact) Safety Isolation Level Safety and EMC Standard Safety Approval Warranty Standard Warranty Extended Warranty Available Models Standard With DC Switch and DC Fuses With AC and DC Switches and DC Fuses
PVI-10.0-I-OUTD-US 10000 11000** 208
10000 11000** 480
2; programmable as a single paralleled input 6800 520 200 (Adj. 120-350) 220-470 0.7 x Vstart-520 48 24 29 Standard version: 2; -S1/-S2 version: 3 Terminal Block, Pressure Clamp, 20AWG-6AWG 3Ø/3W or 4W+Ground 183-228
3Ø/4W+Ground
10000 10000*** 208
10000 10000*** 480
10000 10000*** 600
2; programmable as a single paralleled input 6800 520 200 (Adj. 120-350) 220-470 0.7 x Vstart-520 48 24 29 Standard version: 2; -S1/-S2 version: 3 Terminal Block, Pressure Clamp, 20AWG-6AWG 3Ø/3W or 4W+Ground 183-228
3Ø/4W+Ground
3Ø/3W or 4W+Ground 528-660
14.0 >0.995 (+/-0.9) 0.995 (+/-0.9)
PVi-10.0-i GENERAL SPECIFICATIONS OUTDOOR MODELS
-S1 version
Designed for commercial usage, this three-phase inverter is highly unique in its ability to control the performance of the PV panels, especially during periods of variable weather conditions. This device has two independent MPPTs and efficiency ratings of up to 97.3%. The input voltage range makes the inverter suitable to installations with reduced string size. The HF isolation allows positive or negative ground configuration. It is available with an optional fully-integrated DC combiner box equipped with DC or AC and DC disconnect switches and DC fuses. The unit is free of electrolytic capacitors, leading to a longer product lifetime and reliability.
Features
-S2 version
• High speed and precise MPPT algorithm for real time power tracking and improved energy harvesting • Flat efficiency curves ensure high efficiency at all output levels ensuring consistent and stable performance across the entire input voltage and output power range • ‘Electrolyte-free’ power converter to further increase the life expectancy and long term reliability • True three-phase bridge topology for DC/AC output converter • Night wake up button to access energy harvesting data and error log when inverter is sleeping • Dual input sections with independent MPPT, allows optimal energy harvesting from two sub-arrays oriented in different directions • NEMA 4X outdoor enclosure for unrestricted use under any environmental conditions • Integrated combiner box equipped with a DC switch in compliance with international standards (-S1,-S2) • RS-485 communication interface (for connection to laptop or datalogger) • Compatible with PVI-RADIOMODULE for wireless communication with Aurora PVI-DESKTOP AURORAAURORA TRIO UNO 1
BlOcK DiaGRaM OF PVi-10.0-i FOR nORTh aMeRica
MPPT 1 (DC/DC)
IN1.1(+) +
+
HF TRANSFORMER
For 208Vac and 600Vac both 3-wire and 4-wire AC Grid Connections are allowed. For 480Vac 4-wire AC Grid Connection is required.
INVERTER (DC/AC)
BULK CAPS
IN1.2(+) IN1
IN1 IN1.1(-)
LINE FILTER -
GRID PARALLEL RELAY
-
IN1.2(-)
MPPT 2 (DC/DC)
IN2.1(+) IN1.2(+)
+
+
L1
L1, S
L2
L2
L2, S
L3
L3
L3, S
N
N
-
-
STANDARD VERSION
RS485 IN1.1(+)
+ T/R - T/R
IN1.2(+)
(1)
RTN
+
(1)
-
IN1.2(-)
DC/AC DSP CONTR.
DC/DC DSP CONTR.
IN1 IN1.1(-)
GROUND FAULT DETECTION
REMOTE CONTROL +R -R
µP
ALARM N.C
IN1.3(-)
N.O C
IN2.1(+) CONTROL CIRCUIT
IN2.2(+) IN2.3(+)
(1)
+
(1) IN2
IN2.1(-)
-
IN2.2(-) IN2.3(-)
-S1 / -S2 VERSION
(1) if -PG version switch and fuses are on negative polarity.
Block Diagram and Efficiency Curves
PVi-10.0-i* 100 99 98 97
Efficiency, %
96 95 94 93 220 Vdc
92
362 Vdc
91
416 Vdc
90
* Efficiency shown for inverters operating at 480Vac
2
AURORA TRIO
PE
-S2 VERSION
IN2.2(-)
IN1.3(+)
N, S
PE
IN2
IN2 IN2.1(-)
HF TRANSFORMER
L1
0%
10%
20%
30%
40%
50%
60%
% of Rated Output Power
70%
80%
90%
100%
Technical Data Nominal Output Power Maximum Output Power Rated Grid AC Voltage Input Side (DC) Number of Independent MPPT Channels Maximum Usable Power for Each Channel Absolute Maximum Voltage (Vmax) Start- Up Voltage (Vstart) Full Power MPPT Voltage Range Operating MPPT Voltage Range Maximum Current (Idcmax) for both MPPT in Parallel Maximum Usable Current per Channel Maximum Short Circuit Current Limit per Channel Number of Wire Landing Terminals per Channel Array Wiring Termination Type Output Side (AC)
Values W W V W V V V V A A A
Grid Connection Type Adjustable Voltage Range (Vmin-Vmax) Grid Frequency Adjustable Grid Frequency Range Maximum Current (Iac max) Power Factor Total Harmonic Distortion At Rated Power Grid Wiring Termination Type Protection Devices Input Reverse Polarity Protection Over-Voltage Protection Type PV Array Ground Fault Detection Output Anti-Islanding Protection
V Hz Hz ARMS %
Over-Voltage Protection Type Efficiency Maximum Efficiency CEC Efficiency Operating Parameters Feed-In Power Threshold Stand-by Consumption Communication User-Interface (Display) Remote Monitoring (1xRS485 incl.) Wired Local Monitoring (1xRS485 incl.) Wireless Local Monitoring Environmental Ambient Air Operating Temperature Range Ambient Air Storage Temperature Range Relative Humidity Acoustic Noise Emission Level Maximum Operating Altitude without Derating Mechanical Specifications Enclosure rating Cooling Dimensions (H x W x D) Unit Weight Shipping Weight Conduit Connections Mounting System Ground Fault Detector Fuse Size/ Type Optional String Combiner Fuse Size/Type DC Switch Current Rating (Per Contact) Safety Isolation Level Safety and EMC Standard Safety Approval Warranty Standard Warranty Extended Warranty Available Models Standard With DC Switch and DC Fuses With AC and DC Switches and DC Fuses
PVI-10.0-I-OUTD-US 10000 11000** 208
10000 11000** 480
2; programmable as a single paralleled input 6800 520 200 (Adj. 120-350) 220-470 0.7 x Vstart-520 48 24 29 Standard version: 2; -S1/-S2 version: 3 Terminal Block, Pressure Clamp, 20AWG-6AWG 3Ø/3W or 4W+Ground 183-228
3Ø/4W+Ground
10000 10000*** 208
10000 10000*** 480
10000 10000*** 600
2; programmable as a single paralleled input 6800 520 200 (Adj. 120-350) 220-470 0.7 x Vstart-520 48 24 29 Standard version: 2; -S1/-S2 version: 3 Terminal Block, Pressure Clamp, 20AWG-6AWG 3Ø/3W or 4W+Ground 183-228
3Ø/4W+Ground
3Ø/3W or 4W+Ground 528-660
14.0 >0.995 (+/-0.9) 0.995 (+/-0.9)
