features & specifications - The Home Depot
Catalog Number Notes
FEATURES & SPECIFICATIONS
INTENDED USE
Type
Ideal for mounting above entryways and loading docks. CONSTRUCTION Rugged, corrosion-resistant die-cast aluminum back housing and hinged door frame. Castings are sealed with a one-piece gasket to inhibit the entrance of external contaminants. Lens is thermal- and shockresistant clear tempered glass. Finish is bronze polyester powder paint for lasting durability.
Cutoff Wall Packs
TWR1C
OPTICS Anodized aluminum reflector, provides IES cutoff distribution. Optional full cutoff visor available. Medium-base lamp included in carton. ELECTRICAL
METAL HALIDE: 70-175W HIGH PRESSURE SODIUM: 70-150W
HID: Ballast is high-reactance, high-power-factor for 70-150W. Ballast is 100% factory-tested. Socket: Medium-base socket, nickel-plated screw shell and center contact. INSTALLATION Housing is configured for mounting directly over a standard 4" outlet box or for surface wiring via any of three convenient 1/2" threaded conduit entry hubs. LISTING UL Listed to US and Canadian safety standards (see Options). Suitable for wet locations (250C maximum ambient temperature). Specifications subject to change without notice.
H
W
D
Specifications Height: 10-1/4 (26.0) Width: 13 (33.0) Depth: 8-1/2 (21.5) *Weight: 16.45lbs/ 7.46kg All dimensions shown in inches (centimeters) unless otherwise noted. *Weight as configured in example below.
Example: TWR1C 100M TB LPI
ORDERING INFORMATION
Catalog Number Wattage Voltage
Photocell Lamp included included
Available in Canada
Metal halide
TWR1C 70M 120/347 LPI CSA
70
120/347
N
Y
Y
TWR1C 70M TB LPI
70
120/208/240/277
N
Y
N
TWR1C 100M 120/347 LPI CSA
100
120/347
N
Y
Y
TWR1C 100M TB LPI
100
120/208/240/277
N
Y
N
TWR1C 150M 120 PE LPI
150
120
Y
Y
Y
TWR1C 150M 277 PE LPI
150
277
Y
Y
Y
TWR1C 150M TB LPI
150
120/208/240/277
N
Y
N
TWR1C 175M 120/347 LPI CSA
175
120/347
N
Y
Y
High pressure sodium
TWR1C 70S 120/347 LPI CSA
70
120/347
N
Y
Y
TWR1C 70S TB LPI
70
120/208/240/277
N
Y
N
TWR1C 100S 120/347 LPI CSA
100
120/347
N
Y
Y
TWR1C 100S TB LPI
100
120/208/240/277
N
Y
N
TWR1C 150S 120/347 LPI CSA
150
120/347
N
Y
Y
TWR1C 150S TB LPI
150
120/208/240/277
N
Y
N
Accessories: Order as separate catalog number. Shipped separately TWR1C FCV U TWR1C WG U
OUTDOOR
Full cutoff visor Wireguard
TWR1C-M-S
TWR1C High Pressure Sodium/Metal Halide Cutoff Wall Pack TEST NO: LTL12165
ISOILLUMINANCE PLOT (Footcandle)
0.5 0.25
1
2
3
4
2.5 1.5 1 0.5 0.25
0
1
2
3
4
TWR1C 100M
5
1
2.5 1.51 0.5
2
0.25 3
4 3
4
70W metal halide lamp Footcandle values based on 10' mounting height, 5200 rated lumens. Luminaire Efficienc y: 69.0%
5
IN UNITS OF MOUNTIN G H EI GH T
0
2
0.5
0.25
3
1
2
3
4
5
TEST NO: LTL12166 -2
-1
0
5
1 2.5 1.5
1
2
0.5
DISTANCE
-1
1
2
ISOILLUMINANCEPLOT (Footcandle)
-2
0
2.5 1.5 1
150W high pressure sodium lamp Footcandle values based on 10' mounting height, 15800 rated lumens. Luminaire Efficienc y: 66.9%
Luminaire Efficiency: 70.3%
TEST NO : LTL12142
1 5
0
5
100W high pressure sodium lamp. Footcandle values based on 10' mounting height, 9500 rated l umens .
ISOILLUMINANCE PLOT (Footcandle)
0
4
4
5
70W high pressure sodium lamp Footcandle values based on10' mounting height, 6300 rated lumens . Luminaire Efficiency: 70.3%
TWR1C 70M
3
1
5
4 0
2
0
-1
IN UNITS OF MOUNTIN G H EI GH T
DISTANCE
2.5 1.5 1
IN UNITS OF MOUNTIN G H EIGH T
IN UNITS OF MOUNTIN G H EIGH T
3
1
5
-2
DISTANCE
2
0
-1
TEST NO: LTL12138
ISOILLUMINANCE PLOT (Footcandle)
-2
-2
-1
TWR1C 150S
DISTANCE
TWR1C 100S
TESTNO: LTL12140
ISOILLUMINANCEPLOT (Footcandle)
0.25 3
DISTANCE IN UNITS OF MOUNTING HEIGHT
TWR1C 70S
4 0
1
2
3
4
5
100W metal halide lamp, Footcandle values based on 10' mounting height, 8500 rate d lumens . Luminaire Efficiency: 69.0%
TWR1C-M-S
OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-279-8041 Fax: 770-918-1209 www.lithonia.com © 2004-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/18/2012
FEATURES & SPECIFICATIONS
INTENDED USE
Type
Ideal for mounting above entryways and loading docks. CONSTRUCTION Rugged, corrosion-resistant die-cast aluminum back housing and hinged door frame. Castings are sealed with a one-piece gasket to inhibit the entrance of external contaminants. Lens is thermal- and shockresistant clear tempered glass. Finish is bronze polyester powder paint for lasting durability.
Cutoff Wall Packs
TWR1C
OPTICS Anodized aluminum reflector, provides IES cutoff distribution. Optional full cutoff visor available. Medium-base lamp included in carton. ELECTRICAL
METAL HALIDE: 70-175W HIGH PRESSURE SODIUM: 70-150W
HID: Ballast is high-reactance, high-power-factor for 70-150W. Ballast is 100% factory-tested. Socket: Medium-base socket, nickel-plated screw shell and center contact. INSTALLATION Housing is configured for mounting directly over a standard 4" outlet box or for surface wiring via any of three convenient 1/2" threaded conduit entry hubs. LISTING UL Listed to US and Canadian safety standards (see Options). Suitable for wet locations (250C maximum ambient temperature). Specifications subject to change without notice.
H
W
D
Specifications Height: 10-1/4 (26.0) Width: 13 (33.0) Depth: 8-1/2 (21.5) *Weight: 16.45lbs/ 7.46kg All dimensions shown in inches (centimeters) unless otherwise noted. *Weight as configured in example below.
Example: TWR1C 100M TB LPI
ORDERING INFORMATION
Catalog Number Wattage Voltage
Photocell Lamp included included
Available in Canada
Metal halide
TWR1C 70M 120/347 LPI CSA
70
120/347
N
Y
Y
TWR1C 70M TB LPI
70
120/208/240/277
N
Y
N
TWR1C 100M 120/347 LPI CSA
100
120/347
N
Y
Y
TWR1C 100M TB LPI
100
120/208/240/277
N
Y
N
TWR1C 150M 120 PE LPI
150
120
Y
Y
Y
TWR1C 150M 277 PE LPI
150
277
Y
Y
Y
TWR1C 150M TB LPI
150
120/208/240/277
N
Y
N
TWR1C 175M 120/347 LPI CSA
175
120/347
N
Y
Y
High pressure sodium
TWR1C 70S 120/347 LPI CSA
70
120/347
N
Y
Y
TWR1C 70S TB LPI
70
120/208/240/277
N
Y
N
TWR1C 100S 120/347 LPI CSA
100
120/347
N
Y
Y
TWR1C 100S TB LPI
100
120/208/240/277
N
Y
N
TWR1C 150S 120/347 LPI CSA
150
120/347
N
Y
Y
TWR1C 150S TB LPI
150
120/208/240/277
N
Y
N
Accessories: Order as separate catalog number. Shipped separately TWR1C FCV U TWR1C WG U
OUTDOOR
Full cutoff visor Wireguard
TWR1C-M-S
TWR1C High Pressure Sodium/Metal Halide Cutoff Wall Pack TEST NO: LTL12165
ISOILLUMINANCE PLOT (Footcandle)
0.5 0.25
1
2
3
4
2.5 1.5 1 0.5 0.25
0
1
2
3
4
TWR1C 100M
5
1
2.5 1.51 0.5
2
0.25 3
4 3
4
70W metal halide lamp Footcandle values based on 10' mounting height, 5200 rated lumens. Luminaire Efficienc y: 69.0%
5
IN UNITS OF MOUNTIN G H EI GH T
0
2
0.5
0.25
3
1
2
3
4
5
TEST NO: LTL12166 -2
-1
0
5
1 2.5 1.5
1
2
0.5
DISTANCE
-1
1
2
ISOILLUMINANCEPLOT (Footcandle)
-2
0
2.5 1.5 1
150W high pressure sodium lamp Footcandle values based on 10' mounting height, 15800 rated lumens. Luminaire Efficienc y: 66.9%
Luminaire Efficiency: 70.3%
TEST NO : LTL12142
1 5
0
5
100W high pressure sodium lamp. Footcandle values based on 10' mounting height, 9500 rated l umens .
ISOILLUMINANCE PLOT (Footcandle)
0
4
4
5
70W high pressure sodium lamp Footcandle values based on10' mounting height, 6300 rated lumens . Luminaire Efficiency: 70.3%
TWR1C 70M
3
1
5
4 0
2
0
-1
IN UNITS OF MOUNTIN G H EI GH T
DISTANCE
2.5 1.5 1
IN UNITS OF MOUNTIN G H EIGH T
IN UNITS OF MOUNTIN G H EIGH T
3
1
5
-2
DISTANCE
2
0
-1
TEST NO: LTL12138
ISOILLUMINANCE PLOT (Footcandle)
-2
-2
-1
TWR1C 150S
DISTANCE
TWR1C 100S
TESTNO: LTL12140
ISOILLUMINANCEPLOT (Footcandle)
0.25 3
DISTANCE IN UNITS OF MOUNTING HEIGHT
TWR1C 70S
4 0
1
2
3
4
5
100W metal halide lamp, Footcandle values based on 10' mounting height, 8500 rate d lumens . Luminaire Efficiency: 69.0%
TWR1C-M-S
OUTDOOR: One Lithonia Way Conyers, GA 30012 Phone: 800-279-8041 Fax: 770-918-1209 www.lithonia.com © 2004-2012 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/18/2012
