Fiber Optic Submittals
750 Ball Ave. N.E. Grand Rapids, MI 49503 (616) 458-7210 Fax (616) 458-4741 www.bazenelectric.com
INDUSTRIAL ● COMMERCIAL ● RESIDENTIAL SPECIALIZING IN NEW CONSTRUCTION ● SERVICE/MAINTENANCE ● DESIGN BUILD ● CONTROLS ● AUTOMATION ● PANEL BUILDING ● LIGHTING ● COMPUTER CABLING ● ENERGY MANAGEMENT
Jeremy Amshey OAK Construction Grandville Public Schools Storage Building and Site Improvements
Fiber Optic Submittals
Submitted by: Andy Vanbeek Bazen Electric 5/3/2016 X
14
5-4-16
Debbie King
1
Contact Fiber LAN Product Inquiry Phone: 717-354-6200 [email protected]
Adventum Plenum Rated Indoor/Outdoor Optical Cable 6 x OM3 Adventum Plenum Cable Part Number: LTP006EB3010/25
Berk-Tek’s revolutionary Outdoor/Indoor Adventum™ cables are designed to be used in plenum rated environments. Adventum supports the latest Gigabit Communications Protocols, including Gigabit Ethernet and ATM. This cable design utilizes Berk-Tek’s unique DryGel™ waterblocking system. DryGel technology utilizes super absorbent polymers to replace the messy gel ller inside the ber tubes. It is the only re-rated cable designed to withstand the rigors of the outside plant environment. Adventum is rated for plenum installations and has no gel ller.
Description Berk-Tek's loose tube cable design can be used in all typical campus and outdoor/indoor installations, and is available with standard multimode, singlemode and GIGAlite™ bers. This design affords the installer the ability to place cable anywhere in a network, bypassing the traditional transition points required in most installations. Adventum plenum cable (U.S. Patent No. 6,178,278) is available in 2 to 432 count ber constructions. These cables have been thoroughly tested in accordance with Telcordia GR-409 Issue 2, ICEA-596 Edition 3, and ICEA-696 Edition 2 standards where applicable.
Buffer Tube Construction DryGel blocked color coded loose tubes containing up to 12, 250 µm, individually colored bers.
Applications Berk-Tek recommends installation procedures per ANSI/TIA-758, Customerowned Outside Plant Telecommunications Infrastructure Standard. Berk-Tek's Adventum Loose Tube, plenum rated ber optic cable is intended for all high speed data applications, including: • • • • • • • •
Standards International EN 50173; ISO/ IEC 11801 National ANSI/ICEA S-104-696; ANSI/ICEA S-83-596; ANSI/TIA-568C.3; NFPA 130; Telcordia GR-409
10BASE-FL 100BASE-SX/100BASE-FX ATM 155/ATM 622 1000BASE-SX/1000BASE-LX Fibre Channel 1.062/2.125 10GBASE-SR/SW 10GBASE-LX4 40/100 GbE
Features • Designed to support Gigabit Ethernet, Gigabit ATM, Fibre Channel and other high-speed applications • Plenum rating enables installation to go directly from outside plant to riser shaft or through plenum spaces • Cable core and buffer tubes use DryGel water blocking system • All dielectric design • UV resistant outer jacket protects the cable in outside plant installations
Benefits Compact, water blocked, plenum rated, exible loose tube design of all dielectric Generated 4/20/16 - http://www.nexans.us
Page 1 / 3
All drawings, designs, specications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Contact Fiber LAN Product Inquiry Phone: 717-354-6200 [email protected]
Adventum Plenum Rated Indoor/Outdoor Optical Cable 6 x OM3 Adventum Plenum Cable construction allows for installation in any outside plant or interior space • No cleaning of gels required for installation, greatly reducing installation time and cost • Transition points in network are not needed • System grounding requirements are eliminated
Characteristics Construction characteristics Fiber optic type
OM3 50/125
Type of cable
Loose tube
Jacket Material
Plenum
Sheath colour
Aqua
Dimensional characteristics Tube diameter
3 mm
Number of optical bres
6
Cable diameter (Nominal)
0.26 in
Nominal outer diameter
6.6 mm
Nominal cable weight
30 lb/kft
Approximate weight
45 kg/km
Transmission characteristics Optical performance
EB (50/125 GIGAlite-10, OM3)
Attenuation, max. 850 nm (cabled)
3.0 dB/km
Attenuation, max. 1300 nm (cabled)
1.0 dB/km
Mechanical characteristics Maximum installation tension
300 lb
Maximum installation tension
1335 N
Max. Load. Long Term (lbs)
90.0 lb
Max. Load. Long Term
400.0 N
Impacts per TIA/EIA FOTP-25
2 at 4.41 N-m
Crush resistance per TIA/EIA FOTP-41
110 N/cm
Cable exibility per TIA/EIA FOTP-104
100 cycles
Usage characteristics Minimum Bending Radius - Install
3.9 in
Minimum Bend Radius - Install
9.9 cm
Minimum Bending Radius - LongTerm Minimum Bending Radius - LongTerm
2.6 in 6.6 cm
Operating temperature, range
-40 .. 75 °C
Ambient installation temperature, range
-20 .. 60 °C
Storage temperature, range
-60 .. 85 °C
Field of application
Indoor, Outdoor
Generated 4/20/16 - http://www.nexans.us
Page 2 / 3
All drawings, designs, specications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Contact Fiber LAN Product Inquiry Phone: 717-354-6200 [email protected]
Adventum Plenum Rated Indoor/Outdoor Optical Cable 6 x OM3 Adventum Plenum Cable
Standard Sheath Colors Core ISO-TIA Effective Modal Overfilled Launch Attenuation Attenuation Attenuation Fiber Type Size Sheath Color Standard BW @ 850 nm BW @ 850 nm @ 850 nm @ 1300 nm @ 1550 nm (um) AB
8.3
OS2
NS
NS
NS
0.4 dB/km
0.3 dB/km
Yellow
CB
62.5
OM1
200 MHz-km
200 MHz-km
3.5 dB/km
1.0 dB/km
NS
Orange
GB
62.5
OM1+
500 MHz-km
350 MHz-km
3.5 dB/km
1.0 dB/km
NS
Orange
ZB
50
OM2
500 MHz-km
500 MHz-km
3.5 dB/km
1.5 dB/km
NS
Orange
LB
50
OM2+
950 MHz-km
700 MHz-km
3.0 dB/km
1.0 dB/km
NS
Orange
EB
50
OM3
2000 MHz-km
1500 MHz-km
3.0 dB/km
1.0 dB/km
NS
Aqua
FB
50
OM4
4700 MHz-km
3500 MHz-km
3.0 dB/km
1.0 dB/km
NS
Aqua
XB
50
OM4+
4900 MHz-km
3675 MHz-km
3.0 dB/km
1.0 dB/km
NS
Violet
NS = Not Specied
Manufacturing Release
IMPORTANT NOTICE: This product specication is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualied personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
Selling information hmm...
Generated 4/20/16 - http://www.nexans.us
Page 3 / 3
All drawings, designs, specications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Corning UniCam® ST connectors offer optical performance in a fast, easy field-termination solution ideal for fibre-to-the-workstation applications where setup and teardown time is critical. The high-precision mechanical splice technology enables fibre optic networks to be installed quickly and cost effectively. Installation of an LC, SC or ST® compatible connector can be accomplished in about 50 seconds to one minute with the UniCam HighPerformance Tool Kit. The lightweight, handheld installation tool and highperformance precision cleaver virtually eliminate human variability during installation, ensuring terminations are right the first time, every time. This kit was designed with consideration for network installers, from the cleaver, with its intuitive, hand-held precision design and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal indicating proper mating of the field fibre to the fibre stub. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance assured. Every UniCam® connector is assured to meet the published specification at the time of installation or Corning will replace it.
Part Number: 95-050-51-X
Corning UniCam® high-performance connectors offer best-in-class optical performance in a fast, easy fieldtermination solution. These high-precision zirconia ceramic ferrule connectors assured exceptional insertion loss – 0.1 dB typical/0.5 dB maximum per connector pair for multimode, 0.2 dB typical/0.5 dB maximum per connector pair for single-mode. Installation of an LC, SC or ST® compatible connector can be accomplished in about 50 seconds to one minute with the UniCam highperformance tool kit. The lightweight, hand-held installation tool and highperformance precision cleaver virtually eliminate human variability during installation, ensuring terminations are right the first time, every time. This kit was designed with consideration for network installers, from the cleaver, with its intuitive, hand-held precision design and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal indicating proper mating of the field fiber to the fiber stub. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance assured. Every UniCam® connector is assured to meet the published specification at the time of installation or Corning will replace it.
Features and Benefits Performance guaranteed 100 percent yield guarantee
Product Specification 95-050-51-X_NAFTA_AEN Page 1 | Revision date 2016-02-29
Part Number: 95-050-51-X
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Features and Benefits Broad operating temperature (-40° to +75°C) Utility and flexibility Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost Minimum insertion loss Optimum optical performance
Standards Approvals and Listings
Passed EIA/TIA 568-B.3
Intermateability
Connectors are FOCIS compliant with TIA/EIA 6042 and IEC61754-2
Specifications General Specifications Product Type
Field-Installable Connectors
Technology
No-Epoxy/No-Polish
Keyed
No
Corning Logo
Yes
Packaging
Single Pack
Fiber Category
50 µm MM (OM3/OM4 compatible)
Temperature Range Operation
-40 °C to 75 °C exceeding EIA/TIA 568-B.3 (-40 °F to 167 °F exceeding EIA/TIA 568-B.3)
Design - Connector Connector Type
ST® Compatible
Ferrule Material
Ceramic
Housing Material
Composite
Product Specification 95-050-51-X_NAFTA_AEN Page 2 | Revision date 2016-02-29
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Design - Connector Housing Color
Amber
Boot Color
Aqua
Mechanical Specifications - Connector Durability
≤ 0.2 dB change by 500 rematings, FOTP-21
Nominal Fiber Outer Diameter
125 µm
Tensile Strength Jacketed Cable
50 N, change ≤ 0.2 dB, FOTP-6 (11 lb, change ≤ 0.2 dB, FOTP-6)
Tensile Strength 900 µm Cable
4.9 N, change ≤ 0.2 dB, FOTP-6 (1.1 lb, change ≤ 0.2 dB, FOTP-6)
Optical Specifications - Connector Insertion Loss, Typical
0.1 dB
Insertion Loss, Maximum
0.5 dB
Reflectance
≤ -26 dB
Chemical Characteristics RoHS
Free of hazardous substances according to RoHS 2002/95/ EG
Ordering Information Part Number
95-050-51-X
Product Description
UniCam® High-Performance Connector, ST® Compatible, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, single pack, amber housing, aqua boot
EAN Code
4056418200323
Shipping Information Units per Delivery
1/1
Package Contents
Connector, crimp band, boot (900 µm), boot (3.0 mm)
Product Specification 95-050-51-X_NAFTA_AEN Page 3 | Revision date 2016-02-29
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Notes
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2016 Corning Optical Communications. All rights reserved. Product Specification 95-050-51-X_NAFTA_AEN Page 4 | Revision date 2016-02-29
Buffer Tube Fan-Out Kits, indoor 6 F, 25-in legs
Corning indoor buffer tube fan-out kits are specifically designed for the termination of 6- and 12-fiber buffer tubes. These buffer tube fan-out kits provide the ultimate solution for those users who want to field-install connectors on 250 μm coated fibers. The kits provide the most compact, easy-to-install fan-out solution requiring no additional hardware or space than that required for terminating tight-buffered cables. Indoor kits feature a 900 μm fan-out assembly that is color coded to match the fiber color scheme. The fan-out assembly is available with 6- or 12-fiber units in lengths of 0.6 m (25 in) or 1.2 m (47 in). These different lengths provide the installer the flexibility needed for a variety of hardware options.
Features and Benefits Snap-together furcation Eliminates epoxy for indoor kits
Buffer Tube Fan-out Kit, Indoor | Photo LAN1967
Fiber routing capabilities Better fiber management Compensation for wide temperature fluctuation Outdoor use
Specifications General Specifications Environment
Indoor
Fanout Type
Buffer Tube
Product Type
Fan-Out Kits
Temperature Range Operation
0 °C to 70 °C (32 °F to 158 °F)
Design Cable Type
Cable with 250 µm fiber
Fiber Count
6
Fan-Out Tubing Color
Blue, Orange, Green, Brown, Slate, White
Product Specification FAN-BT25-06_NAFTA_AEN Page 1 | Revision date 2016-04-05
Buffer Tube Fan-Out Kits, indoor 6 F, 25-in legs
Mechanical Specifications - Fan-Out Kit Furcation Length
44.5 mm (1.75 in)
Tubing Length
635 mm (25 in)
Tubing Outer Diameter
0.9 mm
Chemical Characteristics RoHS
Free of hazardous substances according to RoHS 2002/95/ EG
Ordering Information Part Number
FAN-BT25-06
Product Description
Buffer Tube Fan-Out Kit, indoor, 6 F, 25-in legs
EAN Code
4042673619406
Shipping Information Units per Delivery
1/1
Package Contents
Fan-out top, fan-out bottom, insert with fan-out tubing
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2016 Corning Optical Communications. All rights reserved. Product Specification FAN-BT25-06_NAFTA_AEN Page 2 | Revision date 2016-04-05
COMPONENT SPECIFICATIONS 5Wxxx-00N
Opt-X® SDX Wall-Mount Enclosures Small, Medium, and Large APPLICATION
DESIGN CONSIDERATIONS
• Enclosures are sold empty; order loaded SDX adapter plates separately • Specify the type of adapter plates to be installed in enclosure • Specify if splicing is to be used, and if so, what type • Recommend that enclosures be arranged to allow future growth • Designation stickers allow identification of port assignments • Enclosures are capable of storing up to three meters of 900 micron tight-buffered fiber per adapter • Door options: solid or split-hinged metal • Specify if a lock is required on the distribution side, patch side, or both • Includes hardware kit with hook and loop ties, screws, a caution label, and cable ties
STANDARDS COMPLIANCE
Meets all applicable standards: UL Listed; meets or exceeds all ANSI/TIA-568-C requirements
PHYSICAL SPECIFICATIONS
SPECIFICATION
The enclosure shall mount on a wall in an 8"x13", 12"x14", or 17"x15" footprint. Adapters shall be mounted in metal mounting plates and attached to the enclosure using plastic plungers. There shall be cable entrance ports in the top and bottom of the patch panel on both the distribution and patch sides. Cable entrance ports are designed with a strain-relief post with a slot capable of holding a tie wrap. The enclosure shall provide strain relief in the form of a grounding lug and multiple tie wrap points. The enclosure shall have a plastic fiber management ring made of high impact UL 94V-0 rated fire-retardant plastic. This ring shall be stackable and adjustable. A port identification label/ card shall be provided. The enclosure shall be made of 16-gauge steel powder-coated black.
Dimensions: • See page two Materials • Enclosures: 16-gauge steel, powder-coated black, white logo • Fiber Management Rings: Self-extinguishing plastic rated UL 94V-0 • Grommet material: Ensolite™ Enclosures accept all SDX adapter plates. See chart for number of fibers in various configurations.
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit www.leviton.com/warranty.X FIBER DENSITY CHART — SDX WALL-MOUNT ENCLOSURES
FEATURES
• Self-healing grommet material at all cable entry and exit points • Stackable and adjustable fiber management rings included • Large enclosure includes eight plastic blank adapter plates to inexpensively fill up any unused areas — an economical and attractive way to leave room for expanding the enclosure
Page 1 of 2
6-pack ST
8-pack ST
3-pack Duplex SC
6-pack Duplex SC
6-pack Duplex LC
6-pack Quad LC
Small Holds up to 2 SDX adapter plates
Up to 12 fibers
Up to 16 fibers
Up to 12 fibers
Up to 24 fibers
Up to 24 fibers
Up to 48 fibers
Medium Holds up to 4 SDX adapter plates
Up to 24 fibers
Up to 32 fibers
Up to 24 fibers
Up to 48 fibers
Up to 48 fibers
Up to 96 fibers
Large Holds up to 12 SDX adapter plates
Up to 72 fibers
Up to 96 fibers
Up to 72 fibers
Up to 144 fibers
Up to 144 fibers
Up to 288 fibers
Leviton Network Solutions 2222 - 222nd St. SE Bothell, WA 98021-4416
Asia / Pacific T +1.631.812.6228 E [email protected]
Canada T +1.514.954.1840 E [email protected]
Caribbean T +1.954.593.1896 E [email protected]
China T +852.2774.9876 E [email protected]
Colombia T +57.1.743.6045 E [email protected]
tel 1-800-824-3005 tel +1-425-486-2222 [email protected] www.leviton.com
Europe T +33.6.8869.1380 E [email protected]
India / SAARC T +971.4.886.4722 E [email protected]
Mexico T +52.55.5082.1040 E [email protected]
Middle East & Africa T +971.4.886.4722 E [email protected]
South Korea T +82.2.3273.9963 E [email protected]
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised January 2016
5Wxxx-00N
SDX Wall-Mount Enclosures are ideal for fiber applications requiring patching, cross-connect, and/or splicing of single-mode or multimode fibers while utilizing a minimum of space.
1.75"
COMPONENT SPECIFICATIONS 5Wxxx-00N
13"
12"
14"
ELECTRONIC FILES
For CAD files, typical specs, or technical drawings (.DXF, .DWG), visit www.leviton.com. 5.25"
3.5"
19"
5.25" 19"
12" 1.75"
5.25"
17"
12"
13"
12"
Small Wall-mount Enclosure w/ Solid Door
5Wxxx-00N
8"
14"
15"
Medium Wall-mount Enclosure w/ Solid Door
Large Wall-mount 19" Enclosure w/ Solid Door
5.25"
Splice Tray Capacity Chart
Heat Shrink Heat Shrink (Plastic Holders) (Foam Holders)
Bare Fusion
5.25"
Metal Splice Tray (0.25" Height) 12" 12-Fiber Mini, 4" x 7"
T47HS-P06
T47BF-P06
12-Fiber Mini, w/ standoff, 4" x 7"
5T000-00T
12-Fiber Standard, 4" x 11.75"
T4LHS-P06
T4LHS-F06
24-Fiber High-density, 4" x 11.75"
T4LHS-P12
T4LHS-F12
12-Fiber Standard, 5" x 11.75"
T5LHS-P06 17"
T5LHS-F06
24-Fiber High-density, 5" x 11.75"
T5LHS-F12
T5LHS-F12
5.25"
12"
19
Small Medium Large
0
6
6
0
3
3
T4LBF-P06
0
0
6
T4LBF-P12
0
0
6
T5LBF-P06
0
0
T5LBF-P12
0
0
17"
6 10.44"
6
Injection Molded Splice Tray (Mini - 0.39" Height, High-Density - 0.43" Height) 12-Fiber Mini, 3.74" 14" x 5.59"
T5PLS-12F
0
6
6
24-Fiber High-density, 4.5" x 7.63"
T5PLS-24F
0
6
6
Splice tray mounting hardware not included except on 5T000-00T.
OPT-X SDX WALL-MOUNT ENCLOSURES
ACCESSORIES
15"
Description
Part No.
5.25"empty with solid metal door, no lock Small,
5W110-00N
Small, empty with split metal door, with one lock/key
5W120-00N
Small, empty with solid metal door, with one lock/key
5W170-00N
Medium, empty with solid metal door, no lock
5W310-00N
Medium, empty with split metal door, with one lock/key
5W320-00N
Medium, empty with solid metal door, with one lock/key
5W370-00N
Large, empty with solid metal door, no lock
10.44" 5W710-00N
Large, empty with split metal door, with one lock/key
5W720-00N
Large, empty with solid metal door, with one lock/key
5W770-00N
17"
19"
Description
12" Part No.
Lock and key
5L000-L0K
17"
Additional fiber rings (package of 2)
5R100-0FR
Splice tray mounting hardware kit
SPLMT-HKT
Page 2 of 2
A16 5853
Leviton Network Solutions 15"SE 2222 - 222nd St. Bothell, WA 98021-4416
Asia / Pacific T +1.631.812.6228 E [email protected]
Canada T +1.514.954.1840 E [email protected]
Caribbean T +1.954.593.1896 E [email protected]
China T +852.2774.9876 E [email protected]
Colombia T +57.1.743.6045 E [email protected]
tel 1-800-824-3005 tel +1-425-486-2222 [email protected] www.leviton.com
Europe T +33.6.8869.1380 E [email protected]
India / SAARC T +971.4.886.4722 E [email protected]
Mexico T +52.55.5082.1040 E [email protected]
Middle East & Africa T +971.4.886.4722 E [email protected]
South Korea T +82.2.3273.9963 E [email protected]
12"
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised January 2016
INDUSTRIAL ● COMMERCIAL ● RESIDENTIAL SPECIALIZING IN NEW CONSTRUCTION ● SERVICE/MAINTENANCE ● DESIGN BUILD ● CONTROLS ● AUTOMATION ● PANEL BUILDING ● LIGHTING ● COMPUTER CABLING ● ENERGY MANAGEMENT
Jeremy Amshey OAK Construction Grandville Public Schools Storage Building and Site Improvements
Fiber Optic Submittals
Submitted by: Andy Vanbeek Bazen Electric 5/3/2016 X
14
5-4-16
Debbie King
1
Contact Fiber LAN Product Inquiry Phone: 717-354-6200 [email protected]
Adventum Plenum Rated Indoor/Outdoor Optical Cable 6 x OM3 Adventum Plenum Cable Part Number: LTP006EB3010/25
Berk-Tek’s revolutionary Outdoor/Indoor Adventum™ cables are designed to be used in plenum rated environments. Adventum supports the latest Gigabit Communications Protocols, including Gigabit Ethernet and ATM. This cable design utilizes Berk-Tek’s unique DryGel™ waterblocking system. DryGel technology utilizes super absorbent polymers to replace the messy gel ller inside the ber tubes. It is the only re-rated cable designed to withstand the rigors of the outside plant environment. Adventum is rated for plenum installations and has no gel ller.
Description Berk-Tek's loose tube cable design can be used in all typical campus and outdoor/indoor installations, and is available with standard multimode, singlemode and GIGAlite™ bers. This design affords the installer the ability to place cable anywhere in a network, bypassing the traditional transition points required in most installations. Adventum plenum cable (U.S. Patent No. 6,178,278) is available in 2 to 432 count ber constructions. These cables have been thoroughly tested in accordance with Telcordia GR-409 Issue 2, ICEA-596 Edition 3, and ICEA-696 Edition 2 standards where applicable.
Buffer Tube Construction DryGel blocked color coded loose tubes containing up to 12, 250 µm, individually colored bers.
Applications Berk-Tek recommends installation procedures per ANSI/TIA-758, Customerowned Outside Plant Telecommunications Infrastructure Standard. Berk-Tek's Adventum Loose Tube, plenum rated ber optic cable is intended for all high speed data applications, including: • • • • • • • •
Standards International EN 50173; ISO/ IEC 11801 National ANSI/ICEA S-104-696; ANSI/ICEA S-83-596; ANSI/TIA-568C.3; NFPA 130; Telcordia GR-409
10BASE-FL 100BASE-SX/100BASE-FX ATM 155/ATM 622 1000BASE-SX/1000BASE-LX Fibre Channel 1.062/2.125 10GBASE-SR/SW 10GBASE-LX4 40/100 GbE
Features • Designed to support Gigabit Ethernet, Gigabit ATM, Fibre Channel and other high-speed applications • Plenum rating enables installation to go directly from outside plant to riser shaft or through plenum spaces • Cable core and buffer tubes use DryGel water blocking system • All dielectric design • UV resistant outer jacket protects the cable in outside plant installations
Benefits Compact, water blocked, plenum rated, exible loose tube design of all dielectric Generated 4/20/16 - http://www.nexans.us
Page 1 / 3
All drawings, designs, specications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Contact Fiber LAN Product Inquiry Phone: 717-354-6200 [email protected]
Adventum Plenum Rated Indoor/Outdoor Optical Cable 6 x OM3 Adventum Plenum Cable construction allows for installation in any outside plant or interior space • No cleaning of gels required for installation, greatly reducing installation time and cost • Transition points in network are not needed • System grounding requirements are eliminated
Characteristics Construction characteristics Fiber optic type
OM3 50/125
Type of cable
Loose tube
Jacket Material
Plenum
Sheath colour
Aqua
Dimensional characteristics Tube diameter
3 mm
Number of optical bres
6
Cable diameter (Nominal)
0.26 in
Nominal outer diameter
6.6 mm
Nominal cable weight
30 lb/kft
Approximate weight
45 kg/km
Transmission characteristics Optical performance
EB (50/125 GIGAlite-10, OM3)
Attenuation, max. 850 nm (cabled)
3.0 dB/km
Attenuation, max. 1300 nm (cabled)
1.0 dB/km
Mechanical characteristics Maximum installation tension
300 lb
Maximum installation tension
1335 N
Max. Load. Long Term (lbs)
90.0 lb
Max. Load. Long Term
400.0 N
Impacts per TIA/EIA FOTP-25
2 at 4.41 N-m
Crush resistance per TIA/EIA FOTP-41
110 N/cm
Cable exibility per TIA/EIA FOTP-104
100 cycles
Usage characteristics Minimum Bending Radius - Install
3.9 in
Minimum Bend Radius - Install
9.9 cm
Minimum Bending Radius - LongTerm Minimum Bending Radius - LongTerm
2.6 in 6.6 cm
Operating temperature, range
-40 .. 75 °C
Ambient installation temperature, range
-20 .. 60 °C
Storage temperature, range
-60 .. 85 °C
Field of application
Indoor, Outdoor
Generated 4/20/16 - http://www.nexans.us
Page 2 / 3
All drawings, designs, specications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
Contact Fiber LAN Product Inquiry Phone: 717-354-6200 [email protected]
Adventum Plenum Rated Indoor/Outdoor Optical Cable 6 x OM3 Adventum Plenum Cable
Standard Sheath Colors Core ISO-TIA Effective Modal Overfilled Launch Attenuation Attenuation Attenuation Fiber Type Size Sheath Color Standard BW @ 850 nm BW @ 850 nm @ 850 nm @ 1300 nm @ 1550 nm (um) AB
8.3
OS2
NS
NS
NS
0.4 dB/km
0.3 dB/km
Yellow
CB
62.5
OM1
200 MHz-km
200 MHz-km
3.5 dB/km
1.0 dB/km
NS
Orange
GB
62.5
OM1+
500 MHz-km
350 MHz-km
3.5 dB/km
1.0 dB/km
NS
Orange
ZB
50
OM2
500 MHz-km
500 MHz-km
3.5 dB/km
1.5 dB/km
NS
Orange
LB
50
OM2+
950 MHz-km
700 MHz-km
3.0 dB/km
1.0 dB/km
NS
Orange
EB
50
OM3
2000 MHz-km
1500 MHz-km
3.0 dB/km
1.0 dB/km
NS
Aqua
FB
50
OM4
4700 MHz-km
3500 MHz-km
3.0 dB/km
1.0 dB/km
NS
Aqua
XB
50
OM4+
4900 MHz-km
3675 MHz-km
3.0 dB/km
1.0 dB/km
NS
Violet
NS = Not Specied
Manufacturing Release
IMPORTANT NOTICE: This product specication is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualied personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
Selling information hmm...
Generated 4/20/16 - http://www.nexans.us
Page 3 / 3
All drawings, designs, specications, plans and particulars of weights, size and dimensions contained in the technical or commercial documentation of Nexans is indicative only and shall not be binding on Nexans or be treated as constituting a representation on the part of Nexans.
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Corning UniCam® ST connectors offer optical performance in a fast, easy field-termination solution ideal for fibre-to-the-workstation applications where setup and teardown time is critical. The high-precision mechanical splice technology enables fibre optic networks to be installed quickly and cost effectively. Installation of an LC, SC or ST® compatible connector can be accomplished in about 50 seconds to one minute with the UniCam HighPerformance Tool Kit. The lightweight, handheld installation tool and highperformance precision cleaver virtually eliminate human variability during installation, ensuring terminations are right the first time, every time. This kit was designed with consideration for network installers, from the cleaver, with its intuitive, hand-held precision design and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal indicating proper mating of the field fibre to the fibre stub. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance assured. Every UniCam® connector is assured to meet the published specification at the time of installation or Corning will replace it.
Part Number: 95-050-51-X
Corning UniCam® high-performance connectors offer best-in-class optical performance in a fast, easy fieldtermination solution. These high-precision zirconia ceramic ferrule connectors assured exceptional insertion loss – 0.1 dB typical/0.5 dB maximum per connector pair for multimode, 0.2 dB typical/0.5 dB maximum per connector pair for single-mode. Installation of an LC, SC or ST® compatible connector can be accomplished in about 50 seconds to one minute with the UniCam highperformance tool kit. The lightweight, hand-held installation tool and highperformance precision cleaver virtually eliminate human variability during installation, ensuring terminations are right the first time, every time. This kit was designed with consideration for network installers, from the cleaver, with its intuitive, hand-held precision design and dual-clamp precision hold, to the installation tool, with its immediate go/no-go feedback signal indicating proper mating of the field fiber to the fiber stub. Installation is as easy as strip, clean, cleave, cam and crimp, with exceptional optical performance assured. Every UniCam® connector is assured to meet the published specification at the time of installation or Corning will replace it.
Features and Benefits Performance guaranteed 100 percent yield guarantee
Product Specification 95-050-51-X_NAFTA_AEN Page 1 | Revision date 2016-02-29
Part Number: 95-050-51-X
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Features and Benefits Broad operating temperature (-40° to +75°C) Utility and flexibility Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost Minimum insertion loss Optimum optical performance
Standards Approvals and Listings
Passed EIA/TIA 568-B.3
Intermateability
Connectors are FOCIS compliant with TIA/EIA 6042 and IEC61754-2
Specifications General Specifications Product Type
Field-Installable Connectors
Technology
No-Epoxy/No-Polish
Keyed
No
Corning Logo
Yes
Packaging
Single Pack
Fiber Category
50 µm MM (OM3/OM4 compatible)
Temperature Range Operation
-40 °C to 75 °C exceeding EIA/TIA 568-B.3 (-40 °F to 167 °F exceeding EIA/TIA 568-B.3)
Design - Connector Connector Type
ST® Compatible
Ferrule Material
Ceramic
Housing Material
Composite
Product Specification 95-050-51-X_NAFTA_AEN Page 2 | Revision date 2016-02-29
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Design - Connector Housing Color
Amber
Boot Color
Aqua
Mechanical Specifications - Connector Durability
≤ 0.2 dB change by 500 rematings, FOTP-21
Nominal Fiber Outer Diameter
125 µm
Tensile Strength Jacketed Cable
50 N, change ≤ 0.2 dB, FOTP-6 (11 lb, change ≤ 0.2 dB, FOTP-6)
Tensile Strength 900 µm Cable
4.9 N, change ≤ 0.2 dB, FOTP-6 (1.1 lb, change ≤ 0.2 dB, FOTP-6)
Optical Specifications - Connector Insertion Loss, Typical
0.1 dB
Insertion Loss, Maximum
0.5 dB
Reflectance
≤ -26 dB
Chemical Characteristics RoHS
Free of hazardous substances according to RoHS 2002/95/ EG
Ordering Information Part Number
95-050-51-X
Product Description
UniCam® High-Performance Connector, ST® Compatible, 50 µm multimode (OM3/OM4 compatible), ceramic ferrule, logo, single pack, amber housing, aqua boot
EAN Code
4056418200323
Shipping Information Units per Delivery
1/1
Package Contents
Connector, crimp band, boot (900 µm), boot (3.0 mm)
Product Specification 95-050-51-X_NAFTA_AEN Page 3 | Revision date 2016-02-29
UniCam® Connector, ST® Compatible 50 µm multimode (OM3/OM4 compatible)
Notes
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2016 Corning Optical Communications. All rights reserved. Product Specification 95-050-51-X_NAFTA_AEN Page 4 | Revision date 2016-02-29
Buffer Tube Fan-Out Kits, indoor 6 F, 25-in legs
Corning indoor buffer tube fan-out kits are specifically designed for the termination of 6- and 12-fiber buffer tubes. These buffer tube fan-out kits provide the ultimate solution for those users who want to field-install connectors on 250 μm coated fibers. The kits provide the most compact, easy-to-install fan-out solution requiring no additional hardware or space than that required for terminating tight-buffered cables. Indoor kits feature a 900 μm fan-out assembly that is color coded to match the fiber color scheme. The fan-out assembly is available with 6- or 12-fiber units in lengths of 0.6 m (25 in) or 1.2 m (47 in). These different lengths provide the installer the flexibility needed for a variety of hardware options.
Features and Benefits Snap-together furcation Eliminates epoxy for indoor kits
Buffer Tube Fan-out Kit, Indoor | Photo LAN1967
Fiber routing capabilities Better fiber management Compensation for wide temperature fluctuation Outdoor use
Specifications General Specifications Environment
Indoor
Fanout Type
Buffer Tube
Product Type
Fan-Out Kits
Temperature Range Operation
0 °C to 70 °C (32 °F to 158 °F)
Design Cable Type
Cable with 250 µm fiber
Fiber Count
6
Fan-Out Tubing Color
Blue, Orange, Green, Brown, Slate, White
Product Specification FAN-BT25-06_NAFTA_AEN Page 1 | Revision date 2016-04-05
Buffer Tube Fan-Out Kits, indoor 6 F, 25-in legs
Mechanical Specifications - Fan-Out Kit Furcation Length
44.5 mm (1.75 in)
Tubing Length
635 mm (25 in)
Tubing Outer Diameter
0.9 mm
Chemical Characteristics RoHS
Free of hazardous substances according to RoHS 2002/95/ EG
Ordering Information Part Number
FAN-BT25-06
Product Description
Buffer Tube Fan-Out Kit, indoor, 6 F, 25-in legs
EAN Code
4042673619406
Shipping Information Units per Delivery
1/1
Package Contents
Fan-out top, fan-out bottom, insert with fan-out tubing
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2016 Corning Optical Communications. All rights reserved. Product Specification FAN-BT25-06_NAFTA_AEN Page 2 | Revision date 2016-04-05
COMPONENT SPECIFICATIONS 5Wxxx-00N
Opt-X® SDX Wall-Mount Enclosures Small, Medium, and Large APPLICATION
DESIGN CONSIDERATIONS
• Enclosures are sold empty; order loaded SDX adapter plates separately • Specify the type of adapter plates to be installed in enclosure • Specify if splicing is to be used, and if so, what type • Recommend that enclosures be arranged to allow future growth • Designation stickers allow identification of port assignments • Enclosures are capable of storing up to three meters of 900 micron tight-buffered fiber per adapter • Door options: solid or split-hinged metal • Specify if a lock is required on the distribution side, patch side, or both • Includes hardware kit with hook and loop ties, screws, a caution label, and cable ties
STANDARDS COMPLIANCE
Meets all applicable standards: UL Listed; meets or exceeds all ANSI/TIA-568-C requirements
PHYSICAL SPECIFICATIONS
SPECIFICATION
The enclosure shall mount on a wall in an 8"x13", 12"x14", or 17"x15" footprint. Adapters shall be mounted in metal mounting plates and attached to the enclosure using plastic plungers. There shall be cable entrance ports in the top and bottom of the patch panel on both the distribution and patch sides. Cable entrance ports are designed with a strain-relief post with a slot capable of holding a tie wrap. The enclosure shall provide strain relief in the form of a grounding lug and multiple tie wrap points. The enclosure shall have a plastic fiber management ring made of high impact UL 94V-0 rated fire-retardant plastic. This ring shall be stackable and adjustable. A port identification label/ card shall be provided. The enclosure shall be made of 16-gauge steel powder-coated black.
Dimensions: • See page two Materials • Enclosures: 16-gauge steel, powder-coated black, white logo • Fiber Management Rings: Self-extinguishing plastic rated UL 94V-0 • Grommet material: Ensolite™ Enclosures accept all SDX adapter plates. See chart for number of fibers in various configurations.
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit www.leviton.com/warranty.X FIBER DENSITY CHART — SDX WALL-MOUNT ENCLOSURES
FEATURES
• Self-healing grommet material at all cable entry and exit points • Stackable and adjustable fiber management rings included • Large enclosure includes eight plastic blank adapter plates to inexpensively fill up any unused areas — an economical and attractive way to leave room for expanding the enclosure
Page 1 of 2
6-pack ST
8-pack ST
3-pack Duplex SC
6-pack Duplex SC
6-pack Duplex LC
6-pack Quad LC
Small Holds up to 2 SDX adapter plates
Up to 12 fibers
Up to 16 fibers
Up to 12 fibers
Up to 24 fibers
Up to 24 fibers
Up to 48 fibers
Medium Holds up to 4 SDX adapter plates
Up to 24 fibers
Up to 32 fibers
Up to 24 fibers
Up to 48 fibers
Up to 48 fibers
Up to 96 fibers
Large Holds up to 12 SDX adapter plates
Up to 72 fibers
Up to 96 fibers
Up to 72 fibers
Up to 144 fibers
Up to 144 fibers
Up to 288 fibers
Leviton Network Solutions 2222 - 222nd St. SE Bothell, WA 98021-4416
Asia / Pacific T +1.631.812.6228 E [email protected]
Canada T +1.514.954.1840 E [email protected]
Caribbean T +1.954.593.1896 E [email protected]
China T +852.2774.9876 E [email protected]
Colombia T +57.1.743.6045 E [email protected]
tel 1-800-824-3005 tel +1-425-486-2222 [email protected] www.leviton.com
Europe T +33.6.8869.1380 E [email protected]
India / SAARC T +971.4.886.4722 E [email protected]
Mexico T +52.55.5082.1040 E [email protected]
Middle East & Africa T +971.4.886.4722 E [email protected]
South Korea T +82.2.3273.9963 E [email protected]
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised January 2016
5Wxxx-00N
SDX Wall-Mount Enclosures are ideal for fiber applications requiring patching, cross-connect, and/or splicing of single-mode or multimode fibers while utilizing a minimum of space.
1.75"
COMPONENT SPECIFICATIONS 5Wxxx-00N
13"
12"
14"
ELECTRONIC FILES
For CAD files, typical specs, or technical drawings (.DXF, .DWG), visit www.leviton.com. 5.25"
3.5"
19"
5.25" 19"
12" 1.75"
5.25"
17"
12"
13"
12"
Small Wall-mount Enclosure w/ Solid Door
5Wxxx-00N
8"
14"
15"
Medium Wall-mount Enclosure w/ Solid Door
Large Wall-mount 19" Enclosure w/ Solid Door
5.25"
Splice Tray Capacity Chart
Heat Shrink Heat Shrink (Plastic Holders) (Foam Holders)
Bare Fusion
5.25"
Metal Splice Tray (0.25" Height) 12" 12-Fiber Mini, 4" x 7"
T47HS-P06
T47BF-P06
12-Fiber Mini, w/ standoff, 4" x 7"
5T000-00T
12-Fiber Standard, 4" x 11.75"
T4LHS-P06
T4LHS-F06
24-Fiber High-density, 4" x 11.75"
T4LHS-P12
T4LHS-F12
12-Fiber Standard, 5" x 11.75"
T5LHS-P06 17"
T5LHS-F06
24-Fiber High-density, 5" x 11.75"
T5LHS-F12
T5LHS-F12
5.25"
12"
19
Small Medium Large
0
6
6
0
3
3
T4LBF-P06
0
0
6
T4LBF-P12
0
0
6
T5LBF-P06
0
0
T5LBF-P12
0
0
17"
6 10.44"
6
Injection Molded Splice Tray (Mini - 0.39" Height, High-Density - 0.43" Height) 12-Fiber Mini, 3.74" 14" x 5.59"
T5PLS-12F
0
6
6
24-Fiber High-density, 4.5" x 7.63"
T5PLS-24F
0
6
6
Splice tray mounting hardware not included except on 5T000-00T.
OPT-X SDX WALL-MOUNT ENCLOSURES
ACCESSORIES
15"
Description
Part No.
5.25"empty with solid metal door, no lock Small,
5W110-00N
Small, empty with split metal door, with one lock/key
5W120-00N
Small, empty with solid metal door, with one lock/key
5W170-00N
Medium, empty with solid metal door, no lock
5W310-00N
Medium, empty with split metal door, with one lock/key
5W320-00N
Medium, empty with solid metal door, with one lock/key
5W370-00N
Large, empty with solid metal door, no lock
10.44" 5W710-00N
Large, empty with split metal door, with one lock/key
5W720-00N
Large, empty with solid metal door, with one lock/key
5W770-00N
17"
19"
Description
12" Part No.
Lock and key
5L000-L0K
17"
Additional fiber rings (package of 2)
5R100-0FR
Splice tray mounting hardware kit
SPLMT-HKT
Page 2 of 2
A16 5853
Leviton Network Solutions 15"SE 2222 - 222nd St. Bothell, WA 98021-4416
Asia / Pacific T +1.631.812.6228 E [email protected]
Canada T +1.514.954.1840 E [email protected]
Caribbean T +1.954.593.1896 E [email protected]
China T +852.2774.9876 E [email protected]
Colombia T +57.1.743.6045 E [email protected]
tel 1-800-824-3005 tel +1-425-486-2222 [email protected] www.leviton.com
Europe T +33.6.8869.1380 E [email protected]
India / SAARC T +971.4.886.4722 E [email protected]
Mexico T +52.55.5082.1040 E [email protected]
Middle East & Africa T +971.4.886.4722 E [email protected]
South Korea T +82.2.3273.9963 E [email protected]
12"
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised January 2016
