FIG. 7050S* Standard 90Ë Elbow for Fire Protection
FIG. 7050S*
Standard 90˚ Elbow for Fire Protection
C to E O.D.
These fittings are designed to provide minimal pressure drop and uniform strength.
FIGURE 7050S* STANDARD 90˚ ELBOW
VdS
Nominal Size
O.D.
Max. Rated Pressure
In./DN(mm)
In./mm
PSI/bar
In./mm
Lbs./Kg
1
1.315
300
21⁄4
0.6
11⁄4
1.660
300
23⁄4
1.0
1 ⁄2
1.900
300
2 ⁄4
1.2
2
2.375
300
3 ⁄4
1.7
21⁄2
2.875
300
33⁄4
2.6
76.1 3
76.1 3.500
20.7 300
102 41⁄4
1.6 4.0
4
4.500
300
5
7.7
139.7 5
139.7 5.563
20.7 300
133 51⁄2
4.9 11.1
165.1 6
165.1 6.625
20.7 300
165 61⁄2
7.9 16.5
8
8.625
300 20.7
73⁄4
197
30.6
10
10.750
300 20.7
9
229
53.5
12
12.750
300
10
25 32 1
40 50
65 3 O.D.
80
100 51/2 O.D.
125 61/2 O.D.
150 200 250 300
33.4 42.2 48.3 60.3
73.0 2.996
88.9
114.3 5.500
141.3 6.500
168.3 219.1 273.1 323.9
20.7 20.7 20.7 20.7 20.7 300
20.7 20.7 300
20.7 300
20.7
20.7
Center to End
Approx. Wt. Ea.
57 70 3
70 1
83 95 4
108
127 51/4
140 61/2
165
254
0.3 0.5 0.5 0.8
For Listings/Approval Details and Limitations, visit our website at www.anvilintl.com or contact an Anvil® Sales Representative.
– Available galvanized.
* When ordering, refer to product as FP7050S.
MATERIAL SPECIFICATIONS CAST FITTINGS: Ductile Iron conforming to ASTM A-536
COATINGS: q Rust inhibiting paint Color: ORANGE (standard) or q Hot Dipped Zinc Galvanized conforming to ASTM A-153 (optional) q Other available options: Example: RAL3000 or RAL9000 Series
1.2 3.6
1.8
3.5 10.9
5.0 17.4
7.5
13.9 24.3
82
37.2
For additional sizes, see Fig. 7050 in the Gruvlok Catalog or contact an Anvil Representative.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: FP-4.12
Standard 90˚ Elbow for Fire Protection
C to E O.D.
These fittings are designed to provide minimal pressure drop and uniform strength.
FIGURE 7050S* STANDARD 90˚ ELBOW
VdS
Nominal Size
O.D.
Max. Rated Pressure
In./DN(mm)
In./mm
PSI/bar
In./mm
Lbs./Kg
1
1.315
300
21⁄4
0.6
11⁄4
1.660
300
23⁄4
1.0
1 ⁄2
1.900
300
2 ⁄4
1.2
2
2.375
300
3 ⁄4
1.7
21⁄2
2.875
300
33⁄4
2.6
76.1 3
76.1 3.500
20.7 300
102 41⁄4
1.6 4.0
4
4.500
300
5
7.7
139.7 5
139.7 5.563
20.7 300
133 51⁄2
4.9 11.1
165.1 6
165.1 6.625
20.7 300
165 61⁄2
7.9 16.5
8
8.625
300 20.7
73⁄4
197
30.6
10
10.750
300 20.7
9
229
53.5
12
12.750
300
10
25 32 1
40 50
65 3 O.D.
80
100 51/2 O.D.
125 61/2 O.D.
150 200 250 300
33.4 42.2 48.3 60.3
73.0 2.996
88.9
114.3 5.500
141.3 6.500
168.3 219.1 273.1 323.9
20.7 20.7 20.7 20.7 20.7 300
20.7 20.7 300
20.7 300
20.7
20.7
Center to End
Approx. Wt. Ea.
57 70 3
70 1
83 95 4
108
127 51/4
140 61/2
165
254
0.3 0.5 0.5 0.8
For Listings/Approval Details and Limitations, visit our website at www.anvilintl.com or contact an Anvil® Sales Representative.
– Available galvanized.
* When ordering, refer to product as FP7050S.
MATERIAL SPECIFICATIONS CAST FITTINGS: Ductile Iron conforming to ASTM A-536
COATINGS: q Rust inhibiting paint Color: ORANGE (standard) or q Hot Dipped Zinc Galvanized conforming to ASTM A-153 (optional) q Other available options: Example: RAL3000 or RAL9000 Series
1.2 3.6
1.8
3.5 10.9
5.0 17.4
7.5
13.9 24.3
82
37.2
For additional sizes, see Fig. 7050 in the Gruvlok Catalog or contact an Anvil Representative.
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: FP-4.12
