FIG. 7062 Bullhead Tee
FIG. 7062
Bullhead Tee
C to EOR O.D.
C to EOB FIGURE 7062 BULLHEAD TEE (GR x GR x FPT) Nominal Size In./DN(mm)
5x5x8
O.D.
Max. Center to Center to End of Rated Pressure End of Run Branch
In./mm PSI/bar
5.563
125 x 125 x 200 141.3
Approx. Wt. Ea.
In./mm
In./mm
Lbs./Kg
300
73⁄4
51⁄2
31.0
20.7
197
140
14.1
6.625
300
73⁄4
61⁄2
37.6
150 x 150 x 200 168.3
20.7
197
165
17.1
6x6x8
These fittings are designed to provide minimal pressure drop and uniform strength.
For Listings/Approval Details and Limitations, visit our website at www.anvilintl.com or contact an Anvil® Sales Representative.
– Available galvanized.
MATERIAL SPECIFICATIONS FABRICATED FITTINGS: Carbon Steel, Schedule 40, conforming to ASTM A-53, Grade B COATINGS: q Rust inhibiting paint Color: ORANGE (standard) or q Hot Dipped Zinc Galvanized conforming to ASTM A-153 (optional) q Other available options: Example: RAL3000 or RAL9000 Series
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: FP-4.12
Bullhead Tee
C to EOR O.D.
C to EOB FIGURE 7062 BULLHEAD TEE (GR x GR x FPT) Nominal Size In./DN(mm)
5x5x8
O.D.
Max. Center to Center to End of Rated Pressure End of Run Branch
In./mm PSI/bar
5.563
125 x 125 x 200 141.3
Approx. Wt. Ea.
In./mm
In./mm
Lbs./Kg
300
73⁄4
51⁄2
31.0
20.7
197
140
14.1
6.625
300
73⁄4
61⁄2
37.6
150 x 150 x 200 168.3
20.7
197
165
17.1
6x6x8
These fittings are designed to provide minimal pressure drop and uniform strength.
For Listings/Approval Details and Limitations, visit our website at www.anvilintl.com or contact an Anvil® Sales Representative.
– Available galvanized.
MATERIAL SPECIFICATIONS FABRICATED FITTINGS: Carbon Steel, Schedule 40, conforming to ASTM A-53, Grade B COATINGS: q Rust inhibiting paint Color: ORANGE (standard) or q Hot Dipped Zinc Galvanized conforming to ASTM A-153 (optional) q Other available options: Example: RAL3000 or RAL9000 Series
PROJECT INFORMATION
APPROVAL STAMP
Contractor:
q Approved q Approved as noted q Not approved
Engineer:
Remarks:
Project: Address:
Submittal Date: Notes 1: Notes 2: FP-4.12
