Children should never be left unsupervised. parents should always be on their guard.
Finger Wizard Fitting Instructions
Tools
Included: 1 x Finger Wizard
All dimensions in mm
Door Frame
Door
1
2
3
4
5
6
Finger Wizard Gap Cover
Steps 7 and 8 are for Finger Wizard Full Set Installation Essentials
7
Clean the door and the door frame thoroughly. It is essential that surfaces are clean and free of silicone or polish.
8
The channel, flexible cover and gap cover all have self adhesive strip on faces which attach to the door and door frame. Before fitting you must remove pink cover from adhesive strip. When securing ensure adhesive is firmly pressed into place. Can be easily cut to length for smaller door sets by using heavy duty scissors. Suitable for doors with an opening angle to a maximum of 120°. For high pedestrian traffic areas, securing the Finger Wizard using panel pins could be an advantage.
Norseal Ltd, Unit 5 Regents Drive, Prudhoe, Northumberland, NE42 6PX
1 Clean the door and door frame thoroughly.
5 Locate and snap foot into channel on the door.
2 With the door shut, Secure channel into the corner of the door.
6 Close the door.
3 Secure flexible cover to door frame using edge of channel as a guide for positioning. 4 Open door. Line up foot on Flexible cover to channel.
Tel. 01661 830088 Fax 01661 830 099
norseal.co.uk
7 Secure the (L) shaped end to the door butting up to the back of the hinge. 8 Roll cover over the hinge and secure the (T) foot to the door frame.