Firecracker Earring Instructions - Amazon Simple Storage Service (S3)
Firecracker Earrings by FusionBeads.com
Approximate finished length: 1.75 inches Beads and other products needed for four pairs of earrings: 2 - Light Siam Swarovski Crystal Round Bead - 5000 - 6mm (06RD0110) 2 - Capri Blue Swarovski Crystal Round Bead - 5000 - 8mm (08RD0123) 4 - Brass Petal Bead Cap by Nunn Design - Antique Silver - 6mm (BM1105) 2 - Pewter Itsy Star Stamping Charm by Nunn Design - Antique Silver - 13mm (BM5158) 2 - Base Metal Eye Pin - Silver - 21 gauge - 2 inch (BM2639) 1 - Base Metal French Ear Wire with 1.5mm Ball End - Silver - 11mm (BM3092) Tools needed to complete the earrings: Round nose pliers Chain nose pliers Wire cutters
Beading Techniques needed to complete the earrings: Attaching an Ear Wire Simple Loop
Photography, text and jewelry design © 2017 Fusion Beads, Inc.
Instructions to complete “Firecracker” earrings: Step 1 Place these beads in the following sequence onto one eye pin: 1 – 6mm light siam crystal round bead 1 – 6mm silver bead cap (cupped side away from the eye) 1 – 8mm capri blue crystal round bead 1 – 6mm silver bead cap (cupped side toward the previous bead)
Step 2 Using round nose pliers, turn a larger simple loop (see Simple Loop Technique) at the open end of the eye pin, making sure the loop is large enough for the charm to fit.
Step 3 Using chain nose pliers, open the loop from step 2, and attach it to one silver star charm. Close the loop.
Photography, text and jewelry design © 2017 Fusion Beads, Inc.
Step 4 Open the loop on one silver ear wire (see Attaching an Ear Wire Technique), and attach it to the loop on the other end of the eye pin. Close the loop.
Step 5 Repeat Steps 1 – 4 for the second earring.
For step-by-step photos and instructions on these and other techniques, visit FusionBeads.com and select Beading Techniques from the top navigation bar. You’ll find more Inspiration jewelry ideas at FusionBeads.com!
Photography, text and jewelry design © 2017 Fusion Beads, Inc.
Approximate finished length: 1.75 inches Beads and other products needed for four pairs of earrings: 2 - Light Siam Swarovski Crystal Round Bead - 5000 - 6mm (06RD0110) 2 - Capri Blue Swarovski Crystal Round Bead - 5000 - 8mm (08RD0123) 4 - Brass Petal Bead Cap by Nunn Design - Antique Silver - 6mm (BM1105) 2 - Pewter Itsy Star Stamping Charm by Nunn Design - Antique Silver - 13mm (BM5158) 2 - Base Metal Eye Pin - Silver - 21 gauge - 2 inch (BM2639) 1 - Base Metal French Ear Wire with 1.5mm Ball End - Silver - 11mm (BM3092) Tools needed to complete the earrings: Round nose pliers Chain nose pliers Wire cutters
Beading Techniques needed to complete the earrings: Attaching an Ear Wire Simple Loop
Photography, text and jewelry design © 2017 Fusion Beads, Inc.
Instructions to complete “Firecracker” earrings: Step 1 Place these beads in the following sequence onto one eye pin: 1 – 6mm light siam crystal round bead 1 – 6mm silver bead cap (cupped side away from the eye) 1 – 8mm capri blue crystal round bead 1 – 6mm silver bead cap (cupped side toward the previous bead)
Step 2 Using round nose pliers, turn a larger simple loop (see Simple Loop Technique) at the open end of the eye pin, making sure the loop is large enough for the charm to fit.
Step 3 Using chain nose pliers, open the loop from step 2, and attach it to one silver star charm. Close the loop.
Photography, text and jewelry design © 2017 Fusion Beads, Inc.
Step 4 Open the loop on one silver ear wire (see Attaching an Ear Wire Technique), and attach it to the loop on the other end of the eye pin. Close the loop.
Step 5 Repeat Steps 1 – 4 for the second earring.
For step-by-step photos and instructions on these and other techniques, visit FusionBeads.com and select Beading Techniques from the top navigation bar. You’ll find more Inspiration jewelry ideas at FusionBeads.com!
Photography, text and jewelry design © 2017 Fusion Beads, Inc.
