Fittings and Brackets
Superstrut
®
Metal Framing
Fittings and Brackets
Material Superstrut® fittings and brackets are manufactured from hot rolled carbon steel.
Nuts and Bolts Required
Dimensions
Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately.
The following standard dimensions apply to all fittings except as indicated on the individual drawings.
The standard bolt for the 9/16 in. hole is a 1/2 in. hex head cap screw 1 in. long. The 1 in. length may be used with all Series channel.
Hole spacing Hole spacing Hole size Material Material
13/16 in. from end of fittings 1-7/8 in. centers 9/16 in. diameter 1-5/8 in. wide 1/4 in. thick
Design Load For more information on design load, see page A57 Engineering Data and Specifications.
Application Instructions
Finishes and Special Materials
Parts drawings illustrate a typical use for the fitting, and in many cases other uses for the part are appropriate.
Standard finishes are Hot Dipped Galvanized (HDGC) and GoldGalv® (no suffix). Fittings are also available in Electrogalvanized (EG) and Stainless Steel 316 (SS6C). Contact your Regional Sales Office for availability and minimum quantities.
Design Data Load ratings vary depending fittings and brackets are used with 12, 14 or 16 gauge channel. Ratings are shown for each channel material. (See page A57 for Engineering Data and Specifications).
w w w. tnb.c a
Aluminum channel For Aluminum channel, we suggest fittings in HDG (C) or SS6 (C).
A13
Superstrut
®
Metal Framing Fittings and Brackets Flat Fittings
AB206
AB207
X207
AB206HDGC
AB207HDGC
X207HDG
AB206EG
AB207EG
X207EG
AB206
AB207
X207
AB206SS6C
AB207SS6C
X207SS6
Wt./C 35 lb.
Wt./C 52 lb.
Wt./C 78 lb.
X208
AB219
AB220
X208HDG
AB219HDGC
AB220HDGC
X208EG
AB219EG
AB220EG
X208
AB219
AB220
X208SS6C
AB219SS6C
AB220SS6C
Wt./C 88 lb.
Wt./C 53 lb.
Wt./C 78 lb.
AB240
AB241
AB242
AB240HDG
*Finishes
AB242HDGC
AB240EG
• • • •
AB242
AB240 Wt./C 69 lb.
HDGC EG GoldGalv® SS6C Cat. No. AB241-1/4* AB241-5/16* AB241-3/8* AB241-1/2* AB241-5/8* AB241-3/4*
AB242EG Wt./C 9 lb. Bolt Size (in.) 1/4 5/16 3/8 1/2 5/8 3/4
For use with either 3/8 in. or 1/2 in. hanger rod.
Wt./C lb. 18 18 18 17 15 14
AB253
AB255
AB257
AB253HDGC
AB255HDGC
AB257HDGC
AB253EG
AB255EG
AB257EG
AB253
AB255
AB257
AB253SS6C
Wt./C 70 lb.
Wt./C 105 lb.
AB261
AB263
AB265
AB261HDGC
AB263HDGC
AB265HDGC
AB261EG
AB263EG
AB265EG
AB261
AB263
AB265
Wt./C 148 lb.
AB263SS6
Wt./C 105 lb.
Wt./C 97 lb.
Wt./C 150 lb. Standard Dimensions
A14
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets 90º Fittings AB201
AB202
AB203
AB201HDGC
AB202HDGC
AB203HDGC
AB201EG
AB202EG
AB203EG
AB201
AB202
AB203
AB201SS6C
AB202SS6C
AB203SS6C
Wt./C 35 lb.
Wt./C 35 lb.
Wt./C 58 lb.
AB204
AB205
AB213
AB204HDGC
AB205HDGC
AB213HDGC
AB204EG
AB205EG
AB213EG
AB204
AB205
AB213
AB204SS6
AB205SS6C
Wt./C 125 lb.
Wt./C 58 lb.
Wt./C 78 lb.
AB214
AB216
AB214HDGC
AB216HDGC
AB214EG
AB216EG
AB214
AB216SS6C
AB214SS6
Wt./C 135 lb.
*Finishes
AB252
• • • Cat. No. AB252-1* AB252-2* AB252-3* AB252-4*
Wt./C 125 lb.
AB254R
AB254L
AB260R
AB254RHDGC
AB254LHDGC
AB260RHDGC
AB254REG
AB254LEG
AB260REG
AB254R
AB254L
AB260R
Wt./C 105 lb.
Wt./C 105 lb.
Wt./C 58 lb.
AB260L
AB274
AB275
AB260LHDGC
AB274HDG
AB275HDGC
AB260LEG
AB274EG
AB275EG
AB260L
AB274
AB275SS6C
Wt./C 58 lb.
Wt./C 70 lb.
Wt./C 77 lb.
Standard Dimensions
w w w. tnb.c a
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
HDGC GoldGalv® EG A (in.) 3-7/8 5-7/8 7-7/8 9-7/8
Wt./C lb. 61 84 107 130
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
A15
Superstrut
®
Metal Framing
Fittings and Brackets 90º Fittings
AB284R
AB284L
AB299
AB284RHDG
AB284LHDG
AB299HDG
AB284REG
AB284LEG
AB299EG
AB284R
AB284L
AB299
Wt./C 230 lb.
Wt./C 230 lb.
Wt./C 40 lb.
X201
X204
X289
X201HDG
X204HDG
X289HDGC
X201EG
X204EG
X289EG
X201
X204
X289
Wt./C 65 lb.
Wt./C 90 lb.
Wt./C 105 lb.
X299
N205
N219
X299HDGC
N205HDGC
N219HDG
X299EG
N205EG
N219EG
X299
N205
N219
Wt./C 38 lb.
N205SS6C
N219SS6
Wt./C 74 lb.
Wt./C 71 lb.
Standard Dimensions
A16
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets Angular Fittings AB225
AB226
AB227
AB228
AB225HDGC
AB226HDGC
AB227HDGC
AB228HDGC
AB225EG
AB226SS6
AB227EG
AB228SS6C
AB225
Wt./C 119 lb.
AB227
Wt./C 69 lb.
AB225SS6
AB227SS6
Wt./C 58 lb.
Wt./C 58 lb.
Other angles available. Contact your Regional Sales Office.
Other angles available. Contact your Regional Sales Office.
Other angles available. Contact your Regional Sales Office.
Other angles available. Contact your Regional Sales Office.
AB231
AB232
AB239
AB231EG
AB232EG
*Finishes
• • •
HDGC GoldGalv® EG
Cat. No.
A (in.)
B (in.)
Wt./C lb.
AB239-1* AB239-2* AB239-3*
7-13/16 13-3/4 19-3/4
8-1/2 17 25-1/2
148 255 363
“Z” Shape Fittings A209
B209
C209
A209HDGC
B209HDG
C209
A209EG
B209EG
Wt./C 49 lb.
A209
B209
A209SS6
Wt./C 43 lb.
Wt./C 55 lb. For attaching A and AR Series channel.
D209
1"
For attaching B and BR Series channel.
For attaching C Series channel.
CZ209
EZ209
Wt./C 45 lb.
EZ209HDGC EZ209EG EZ209 EZ209SS6
For attaching D Series channel.
For attaching H Series and A back to back. Standard Dimensions
w w w. tnb.c a
Hole Spacing Hole Spacing Hole Size Material Material
For attaching E Series channel.
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
A17
Superstrut
®
Metal Framing
Fittings and Brackets “U” Shape Fittings A208
A213 Inside Joiner
A210
A208HDGC
Wt./C 40 lb.
A210HDGC
A208EG
A210EG
A208
A210
A208SS6C
A210SS6C
Wt./C 275 lb. Does not include stud nut or bolts. For A and AR Series channel.
For A1200 Series. Available only in GoldGalv® finish.
Wt./C 88 lb. For attaching A and AR Series channel.
A211
AN211
A212
A211HDGC
AN211HDG
A212HDG
A211EG
AN211EG
A212EG
A211
AN211
A212
Wt./C 128 lb.
Wt./C 181 lb.
A212SS6 Wt./C 113 lb.
For attaching A and AR Series double channel, and H Series.
B210
C210
D210
B210HDG
C210HDG
D210HDG
B210EG
C210EG
D210EG
B210
C210
D210
B210SS6
Wt./C 77 lb.
D210SS6
Wt./C 65 lb.
Wt./C 71 lb.
For attaching B and BR Series.
For attaching C Series channel.
For attaching D Series channel.
E210
AB245
AB288
E210HDGC
AB245HDG
E210EG
AB245EG
*Finishes
E210
AB245
Wt./C 112 lb.
Wt./C 70 lb.
• • •
For attaching E Series channel.
For attaching A and AR Series double channel.
Standard Dimensions
A18
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
HDGC GoldGalv® EG Cat. No. Bolt Size (in.) Wt./C lb. AB288-3/8* 3/8 AB288-1/2* 1/2 37 AB288-5/8* 5/8
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets Wing Fittings AW204
AW214
A217
AW204HDG
AW214HDG
AW217HDG
AW204EG
AW214EG
A217EG
AW204
AW214
A217
Wt./C 76 lb.
Wt./C 115 lb.
Wt./C 155 lb.
AW205L
AW205R
AW215L
AW215R
AW205LHDG
AW205REG
AW215LHDG
AW215RHDG
AW205LEG
AW205R
AW215LEG
AW215REG
AW205L
Wt./C 59 lb.
AW215L
AW215R
Wt./C 98 lb.
Wt./C 98 lb.
Wt./C 59 lb.
3 /8 "
3 /8 "
7
7
AW220
AW224
AW219
AW220HDGC
AW224HDGC
AW219HDGC
AW220EG
AW224EG
AW219EG
AW220
AW224
AW219
Wt./C 90 lb.
Wt./C 147 lb.
Wt./C 187 lb.
AW226
A218
AW228
AW226HDG
A218HDG
AW228HDG
AW226
A218EG
AW228EG
Wt./C 113 lb.
A218
AW228
Wt./C 177 lb.
Wt./C 230 lb.
Standard Dimensions
w w w. tnb.c a
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
A19
Superstrut
®
Metal Framing
Fittings and Brackets Brackets
*Finishes
S202
•
Cat. No. S202-6* S202-9* S202-15* S202-21* S202-27* S202-33*
A (in.) B (in.) C (in.) 6 9 15 21 27 33
S250
5 8 14 20 26 32
•
Wt./C lb.
— 2 8 14 20 26
75 100 175 250 325 400
*Finishes
• •
HDG SS6C
Design Wt./C Load/lb. lb. S250-6* 6 1500 150 S250-8* 8-1/2 1500 150 S250-12* 12 800 250 S250-14* 14-1/2 800 250 S250-18* 18 550 350 S250-20* 20-1/2 550 350 S250-24* 24 400 450 S250-26* 26-1/2 400 450 May be installed inverted with no change in load ratings. Cat. No.
S247 S247HDG S247 S247SS6
*Finishes
S203
HDG
A (in.)
Cat. No.
A (in.) B (in.)
S203-8* S203-14* S203-20* S203-26* S203-32* S203-38*
8-1/2 4-1/16 14-1/2 5-3/8 20-1/2 6-11/16 26-1/2 8 32-1/2 8 38-1/2 8
Wt./C lb. 180 325 525 675 840 1050
1200
*Finishes
• •
Cat. No.
A (in.)
S251-12* S251-14* S251-18* S251-20* S251-24* S251-26* S251-30* S251-32* S251-36* S251-38*
12 14-1/2 18 20-1/2 24 26-1/2 30 32-1/2 36 38-1/2
Design Moment
• •
Cat. No.
A (in.) B (in.)
S249-8* S249-14* S249-20* S249-26* S249-32* S249-38*
8-1/2 14-1/2 20-1/2 26-1/2 32-1/2 38-1/2
Design Load/lb. 1650 1650 1050 1050 800 800 650 650 500 500
Wt./C lb. 514 514 714 714 914 914 1114 1114 1314 1314
A20
Hole Spacing Hole Spacing Hole Size Material Material
• •
HDG SS6C
Design Wt./C Load/lb. lb. S256-6* 6 1000 151 S256-8* 8-1/2 1000 151 S256-12* 12 500 251 S256-14* 14-1/2 500 251 S256-18* 18 300 351 S256-20* 20-1/2 300 351 S256-24* 24 250 451 S256-26* 26-1/2 250 451 When installed in inverted position reduce load rating 40%. A (in.)
Design Moment (channel upright as shown) When Supported By A-1202 A-1402
Applies to fitting only, not to the arm. Standard Dimensions
*Finishes
Cat. No.
S248
5250 inch lb. 3650 inch lb.
Wt./C lb. 320 520 660 870 1030 1230
1500
S256
S248HDGC
When Supported By
8 9 9 11-1/2 11-1/2 11-1/2
HDG SS6C
Design Load/lb.
HDG SS6C
S248
(channel upright as shown) A-1200 A-1400
Design Load/lb.
S251
*Finishes
S249
HDG
10 800 inch lb. 7550 inch lb.
Applies to fitting only, not to the arm. 13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets Brackets
S204
S205
S217
S204HDGC
S205HDGC
S217HDG
S204
S205
S217
Wt./C 174 lb.
Wt./C 264 lb.
S217SS6 Wt./C 264 lb.
Design Uniform Load/lb. A-1200 A-1400
Design Uniform Load/lb.
Design Uniform Load/lb. 750 500
A-1200 A-1400
A-1200 A-1400
750 500
S218
S222
S226
S218HDG
S222HDG
S226HDG
S218
S222
S226
Wt./C 295 lb.
Wt./C 385 lb.
Wt./C 421 lb.
Design Uniform Load/lb. A-1200 A-1400
w w w. tnb.c a
Design Uniform Load/lb.
Design Uniform Load/lb. 750 650
A-1200 A-1400
750 650
1000 750
A-1200 A-1400
1000 750
A21
Superstrut
®
Metal Framing
Fittings and Brackets Post Bases AP232
AP235
AP232HDGC
AP235HDGC
AP232EG
AP235EG
AP232
AP235
Wt./C 384 lb.
Wt./C 400 lb.
AP232SQ
AP235SQ
AP232SQHDGC
AP235SQHDGC
AP232SQEG
AP235SQEG
AP232SQSS6
AP235SQ
Wt./C 384 lb.
AP235SQSS6 Wt./C 400 lb.
AN270
*Finishes
TS272 Track Support
TS273 Track Support
• •
TS272HDG
TS273HDG
Requires 3/8 in. x 2-1/2 in. bolt and nut (not included)
For use over channel splice
HDG EG
Cat. No.
A
B
Wt./C lb.
AN270-1* AN270-2* AN270-3* AN270-4* AN270-*
2-3/8 4-3/8 6-3/8 8-3/8 10-3/8
6 8 10 12 14
113 151 199 246 293
A22
Design load: 1000 lb. Wt./C 104 lb.
Requires 3/8 in. x 2-1/2 in. bolt and nut (not included) Design load: 2000 lb. Wt./C 228 lb.
w w w. tnb.c a
Superstrut
Metal Framing
Fittings and Brackets Special Application Fittings and Brackets TR292
TR294
Can be used for Series A, E and H channels only.
Can be used for Series A, E and H channels only.
Standard finish is Electrogalvanized.
Standard finish is Electrogalvanized.
Frictionless needle bearings.
Frictionless needle bearings.
Design load: 500 lb.
Design load: 1000 lb.
Cast aluminum rollers, steel brackets. Designed for standard saddles. Order separately for each pair of rollers: two 1/2 in. x 5/16 in. hex head cap screws and two 1/2 in. channel nuts. Space to suit O.D. of pipe and wrapping.
Safety factor of 5.
Safety factor of 5.
Design Load: 2350 lb.
Wt./C 59 lb.
Wt./C 106 lb.
Wt./C : 300 lb.
Do not use with back to back Strut
C728 Pipe Roller (Pair)
Adjustable Universal Support Support building services and access equipment on flat roofs and flat surfaces
Riser Kit Cat. No. AUS14-96 AUS-RISER-KIT A1200HS100PG H104-1/2X10EGC E145-1/2EGC E147-1/2EGC E148-1/2EGC
The T&B Adjustable Universal Support (AUS) provides an easy method for supporting pipes, conduit and equipment on flat roofs, below raised floors and even on level ground applications. The AUS reduces installation time compared to other support solutions such as wooden blocks, cement blocks, straps and clips. These labor intensive solutions also increase the danger of roof membrane penetration. The AUS system also allows for tool free adjustment of the pedestal height from 6 to 9 inches with a twist of the wrist. This ensures that the supported objects or pipes are uniformly supported and no high stress supports are carrying a disproportionate load in a single location.
w w w. t nb. c a
AUS-STRUT-KIT A1200HS100PG E142-1/2X200EGC E145-1/2EGC E147-1/2EGC E148-1/2EGC
Description Ajustable Universal Support (Base only)
Qty. 1
Riser Kit 14 in. strut 12 in. threaded rod Nut Washer Lock washer
1 2 8 8 4
Bolt Kit 14 in. strut Bolt Nut Washer Lock washer
1 2 2 4 2
AUS125PCSS6
4-1/2 in. stainless steel 316 strap (to restrain 1-1/4 in. pipe)
2
AUS150PCSS6
5 in. strap (to restrain 1-1/2 in. pipe)
2
AUS200PCSS6
6 in. strap (to restrain 2 in. pipe)
2
Bolt Kit
Straps
Pipe Grooves 12 in. Platform Adjustable Height Jackscrew Locking Mechanism Sturdy Jackscrew Base to Distribute Load Flexible PVC Mat to Eliminate Stress Points
A23
®
Metal Framing
Fittings and Brackets
Material Superstrut® fittings and brackets are manufactured from hot rolled carbon steel.
Nuts and Bolts Required
Dimensions
Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately.
The following standard dimensions apply to all fittings except as indicated on the individual drawings.
The standard bolt for the 9/16 in. hole is a 1/2 in. hex head cap screw 1 in. long. The 1 in. length may be used with all Series channel.
Hole spacing Hole spacing Hole size Material Material
13/16 in. from end of fittings 1-7/8 in. centers 9/16 in. diameter 1-5/8 in. wide 1/4 in. thick
Design Load For more information on design load, see page A57 Engineering Data and Specifications.
Application Instructions
Finishes and Special Materials
Parts drawings illustrate a typical use for the fitting, and in many cases other uses for the part are appropriate.
Standard finishes are Hot Dipped Galvanized (HDGC) and GoldGalv® (no suffix). Fittings are also available in Electrogalvanized (EG) and Stainless Steel 316 (SS6C). Contact your Regional Sales Office for availability and minimum quantities.
Design Data Load ratings vary depending fittings and brackets are used with 12, 14 or 16 gauge channel. Ratings are shown for each channel material. (See page A57 for Engineering Data and Specifications).
w w w. tnb.c a
Aluminum channel For Aluminum channel, we suggest fittings in HDG (C) or SS6 (C).
A13
Superstrut
®
Metal Framing Fittings and Brackets Flat Fittings
AB206
AB207
X207
AB206HDGC
AB207HDGC
X207HDG
AB206EG
AB207EG
X207EG
AB206
AB207
X207
AB206SS6C
AB207SS6C
X207SS6
Wt./C 35 lb.
Wt./C 52 lb.
Wt./C 78 lb.
X208
AB219
AB220
X208HDG
AB219HDGC
AB220HDGC
X208EG
AB219EG
AB220EG
X208
AB219
AB220
X208SS6C
AB219SS6C
AB220SS6C
Wt./C 88 lb.
Wt./C 53 lb.
Wt./C 78 lb.
AB240
AB241
AB242
AB240HDG
*Finishes
AB242HDGC
AB240EG
• • • •
AB242
AB240 Wt./C 69 lb.
HDGC EG GoldGalv® SS6C Cat. No. AB241-1/4* AB241-5/16* AB241-3/8* AB241-1/2* AB241-5/8* AB241-3/4*
AB242EG Wt./C 9 lb. Bolt Size (in.) 1/4 5/16 3/8 1/2 5/8 3/4
For use with either 3/8 in. or 1/2 in. hanger rod.
Wt./C lb. 18 18 18 17 15 14
AB253
AB255
AB257
AB253HDGC
AB255HDGC
AB257HDGC
AB253EG
AB255EG
AB257EG
AB253
AB255
AB257
AB253SS6C
Wt./C 70 lb.
Wt./C 105 lb.
AB261
AB263
AB265
AB261HDGC
AB263HDGC
AB265HDGC
AB261EG
AB263EG
AB265EG
AB261
AB263
AB265
Wt./C 148 lb.
AB263SS6
Wt./C 105 lb.
Wt./C 97 lb.
Wt./C 150 lb. Standard Dimensions
A14
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets 90º Fittings AB201
AB202
AB203
AB201HDGC
AB202HDGC
AB203HDGC
AB201EG
AB202EG
AB203EG
AB201
AB202
AB203
AB201SS6C
AB202SS6C
AB203SS6C
Wt./C 35 lb.
Wt./C 35 lb.
Wt./C 58 lb.
AB204
AB205
AB213
AB204HDGC
AB205HDGC
AB213HDGC
AB204EG
AB205EG
AB213EG
AB204
AB205
AB213
AB204SS6
AB205SS6C
Wt./C 125 lb.
Wt./C 58 lb.
Wt./C 78 lb.
AB214
AB216
AB214HDGC
AB216HDGC
AB214EG
AB216EG
AB214
AB216SS6C
AB214SS6
Wt./C 135 lb.
*Finishes
AB252
• • • Cat. No. AB252-1* AB252-2* AB252-3* AB252-4*
Wt./C 125 lb.
AB254R
AB254L
AB260R
AB254RHDGC
AB254LHDGC
AB260RHDGC
AB254REG
AB254LEG
AB260REG
AB254R
AB254L
AB260R
Wt./C 105 lb.
Wt./C 105 lb.
Wt./C 58 lb.
AB260L
AB274
AB275
AB260LHDGC
AB274HDG
AB275HDGC
AB260LEG
AB274EG
AB275EG
AB260L
AB274
AB275SS6C
Wt./C 58 lb.
Wt./C 70 lb.
Wt./C 77 lb.
Standard Dimensions
w w w. tnb.c a
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
HDGC GoldGalv® EG A (in.) 3-7/8 5-7/8 7-7/8 9-7/8
Wt./C lb. 61 84 107 130
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
A15
Superstrut
®
Metal Framing
Fittings and Brackets 90º Fittings
AB284R
AB284L
AB299
AB284RHDG
AB284LHDG
AB299HDG
AB284REG
AB284LEG
AB299EG
AB284R
AB284L
AB299
Wt./C 230 lb.
Wt./C 230 lb.
Wt./C 40 lb.
X201
X204
X289
X201HDG
X204HDG
X289HDGC
X201EG
X204EG
X289EG
X201
X204
X289
Wt./C 65 lb.
Wt./C 90 lb.
Wt./C 105 lb.
X299
N205
N219
X299HDGC
N205HDGC
N219HDG
X299EG
N205EG
N219EG
X299
N205
N219
Wt./C 38 lb.
N205SS6C
N219SS6
Wt./C 74 lb.
Wt./C 71 lb.
Standard Dimensions
A16
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets Angular Fittings AB225
AB226
AB227
AB228
AB225HDGC
AB226HDGC
AB227HDGC
AB228HDGC
AB225EG
AB226SS6
AB227EG
AB228SS6C
AB225
Wt./C 119 lb.
AB227
Wt./C 69 lb.
AB225SS6
AB227SS6
Wt./C 58 lb.
Wt./C 58 lb.
Other angles available. Contact your Regional Sales Office.
Other angles available. Contact your Regional Sales Office.
Other angles available. Contact your Regional Sales Office.
Other angles available. Contact your Regional Sales Office.
AB231
AB232
AB239
AB231EG
AB232EG
*Finishes
• • •
HDGC GoldGalv® EG
Cat. No.
A (in.)
B (in.)
Wt./C lb.
AB239-1* AB239-2* AB239-3*
7-13/16 13-3/4 19-3/4
8-1/2 17 25-1/2
148 255 363
“Z” Shape Fittings A209
B209
C209
A209HDGC
B209HDG
C209
A209EG
B209EG
Wt./C 49 lb.
A209
B209
A209SS6
Wt./C 43 lb.
Wt./C 55 lb. For attaching A and AR Series channel.
D209
1"
For attaching B and BR Series channel.
For attaching C Series channel.
CZ209
EZ209
Wt./C 45 lb.
EZ209HDGC EZ209EG EZ209 EZ209SS6
For attaching D Series channel.
For attaching H Series and A back to back. Standard Dimensions
w w w. tnb.c a
Hole Spacing Hole Spacing Hole Size Material Material
For attaching E Series channel.
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
A17
Superstrut
®
Metal Framing
Fittings and Brackets “U” Shape Fittings A208
A213 Inside Joiner
A210
A208HDGC
Wt./C 40 lb.
A210HDGC
A208EG
A210EG
A208
A210
A208SS6C
A210SS6C
Wt./C 275 lb. Does not include stud nut or bolts. For A and AR Series channel.
For A1200 Series. Available only in GoldGalv® finish.
Wt./C 88 lb. For attaching A and AR Series channel.
A211
AN211
A212
A211HDGC
AN211HDG
A212HDG
A211EG
AN211EG
A212EG
A211
AN211
A212
Wt./C 128 lb.
Wt./C 181 lb.
A212SS6 Wt./C 113 lb.
For attaching A and AR Series double channel, and H Series.
B210
C210
D210
B210HDG
C210HDG
D210HDG
B210EG
C210EG
D210EG
B210
C210
D210
B210SS6
Wt./C 77 lb.
D210SS6
Wt./C 65 lb.
Wt./C 71 lb.
For attaching B and BR Series.
For attaching C Series channel.
For attaching D Series channel.
E210
AB245
AB288
E210HDGC
AB245HDG
E210EG
AB245EG
*Finishes
E210
AB245
Wt./C 112 lb.
Wt./C 70 lb.
• • •
For attaching E Series channel.
For attaching A and AR Series double channel.
Standard Dimensions
A18
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
HDGC GoldGalv® EG Cat. No. Bolt Size (in.) Wt./C lb. AB288-3/8* 3/8 AB288-1/2* 1/2 37 AB288-5/8* 5/8
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets Wing Fittings AW204
AW214
A217
AW204HDG
AW214HDG
AW217HDG
AW204EG
AW214EG
A217EG
AW204
AW214
A217
Wt./C 76 lb.
Wt./C 115 lb.
Wt./C 155 lb.
AW205L
AW205R
AW215L
AW215R
AW205LHDG
AW205REG
AW215LHDG
AW215RHDG
AW205LEG
AW205R
AW215LEG
AW215REG
AW205L
Wt./C 59 lb.
AW215L
AW215R
Wt./C 98 lb.
Wt./C 98 lb.
Wt./C 59 lb.
3 /8 "
3 /8 "
7
7
AW220
AW224
AW219
AW220HDGC
AW224HDGC
AW219HDGC
AW220EG
AW224EG
AW219EG
AW220
AW224
AW219
Wt./C 90 lb.
Wt./C 147 lb.
Wt./C 187 lb.
AW226
A218
AW228
AW226HDG
A218HDG
AW228HDG
AW226
A218EG
AW228EG
Wt./C 113 lb.
A218
AW228
Wt./C 177 lb.
Wt./C 230 lb.
Standard Dimensions
w w w. tnb.c a
Hole Spacing Hole Spacing Hole Size Material Material
13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
A19
Superstrut
®
Metal Framing
Fittings and Brackets Brackets
*Finishes
S202
•
Cat. No. S202-6* S202-9* S202-15* S202-21* S202-27* S202-33*
A (in.) B (in.) C (in.) 6 9 15 21 27 33
S250
5 8 14 20 26 32
•
Wt./C lb.
— 2 8 14 20 26
75 100 175 250 325 400
*Finishes
• •
HDG SS6C
Design Wt./C Load/lb. lb. S250-6* 6 1500 150 S250-8* 8-1/2 1500 150 S250-12* 12 800 250 S250-14* 14-1/2 800 250 S250-18* 18 550 350 S250-20* 20-1/2 550 350 S250-24* 24 400 450 S250-26* 26-1/2 400 450 May be installed inverted with no change in load ratings. Cat. No.
S247 S247HDG S247 S247SS6
*Finishes
S203
HDG
A (in.)
Cat. No.
A (in.) B (in.)
S203-8* S203-14* S203-20* S203-26* S203-32* S203-38*
8-1/2 4-1/16 14-1/2 5-3/8 20-1/2 6-11/16 26-1/2 8 32-1/2 8 38-1/2 8
Wt./C lb. 180 325 525 675 840 1050
1200
*Finishes
• •
Cat. No.
A (in.)
S251-12* S251-14* S251-18* S251-20* S251-24* S251-26* S251-30* S251-32* S251-36* S251-38*
12 14-1/2 18 20-1/2 24 26-1/2 30 32-1/2 36 38-1/2
Design Moment
• •
Cat. No.
A (in.) B (in.)
S249-8* S249-14* S249-20* S249-26* S249-32* S249-38*
8-1/2 14-1/2 20-1/2 26-1/2 32-1/2 38-1/2
Design Load/lb. 1650 1650 1050 1050 800 800 650 650 500 500
Wt./C lb. 514 514 714 714 914 914 1114 1114 1314 1314
A20
Hole Spacing Hole Spacing Hole Size Material Material
• •
HDG SS6C
Design Wt./C Load/lb. lb. S256-6* 6 1000 151 S256-8* 8-1/2 1000 151 S256-12* 12 500 251 S256-14* 14-1/2 500 251 S256-18* 18 300 351 S256-20* 20-1/2 300 351 S256-24* 24 250 451 S256-26* 26-1/2 250 451 When installed in inverted position reduce load rating 40%. A (in.)
Design Moment (channel upright as shown) When Supported By A-1202 A-1402
Applies to fitting only, not to the arm. Standard Dimensions
*Finishes
Cat. No.
S248
5250 inch lb. 3650 inch lb.
Wt./C lb. 320 520 660 870 1030 1230
1500
S256
S248HDGC
When Supported By
8 9 9 11-1/2 11-1/2 11-1/2
HDG SS6C
Design Load/lb.
HDG SS6C
S248
(channel upright as shown) A-1200 A-1400
Design Load/lb.
S251
*Finishes
S249
HDG
10 800 inch lb. 7550 inch lb.
Applies to fitting only, not to the arm. 13/16 in. From End 1-7/8 in. Centers 9/16 in. Diam. 1-5/8 in. Width 1/4 in. Thick
Materials
HDG(C) EG(C) (No suffix) SS6(C)
Hot-Dipped Galvanized Electrogalvanized GoldGalv® Stainless Steel 316
w w w. tnb.c a
Superstrut
®
Metal Framing
Fittings and Brackets Brackets
S204
S205
S217
S204HDGC
S205HDGC
S217HDG
S204
S205
S217
Wt./C 174 lb.
Wt./C 264 lb.
S217SS6 Wt./C 264 lb.
Design Uniform Load/lb. A-1200 A-1400
Design Uniform Load/lb.
Design Uniform Load/lb. 750 500
A-1200 A-1400
A-1200 A-1400
750 500
S218
S222
S226
S218HDG
S222HDG
S226HDG
S218
S222
S226
Wt./C 295 lb.
Wt./C 385 lb.
Wt./C 421 lb.
Design Uniform Load/lb. A-1200 A-1400
w w w. tnb.c a
Design Uniform Load/lb.
Design Uniform Load/lb. 750 650
A-1200 A-1400
750 650
1000 750
A-1200 A-1400
1000 750
A21
Superstrut
®
Metal Framing
Fittings and Brackets Post Bases AP232
AP235
AP232HDGC
AP235HDGC
AP232EG
AP235EG
AP232
AP235
Wt./C 384 lb.
Wt./C 400 lb.
AP232SQ
AP235SQ
AP232SQHDGC
AP235SQHDGC
AP232SQEG
AP235SQEG
AP232SQSS6
AP235SQ
Wt./C 384 lb.
AP235SQSS6 Wt./C 400 lb.
AN270
*Finishes
TS272 Track Support
TS273 Track Support
• •
TS272HDG
TS273HDG
Requires 3/8 in. x 2-1/2 in. bolt and nut (not included)
For use over channel splice
HDG EG
Cat. No.
A
B
Wt./C lb.
AN270-1* AN270-2* AN270-3* AN270-4* AN270-*
2-3/8 4-3/8 6-3/8 8-3/8 10-3/8
6 8 10 12 14
113 151 199 246 293
A22
Design load: 1000 lb. Wt./C 104 lb.
Requires 3/8 in. x 2-1/2 in. bolt and nut (not included) Design load: 2000 lb. Wt./C 228 lb.
w w w. tnb.c a
Superstrut
Metal Framing
Fittings and Brackets Special Application Fittings and Brackets TR292
TR294
Can be used for Series A, E and H channels only.
Can be used for Series A, E and H channels only.
Standard finish is Electrogalvanized.
Standard finish is Electrogalvanized.
Frictionless needle bearings.
Frictionless needle bearings.
Design load: 500 lb.
Design load: 1000 lb.
Cast aluminum rollers, steel brackets. Designed for standard saddles. Order separately for each pair of rollers: two 1/2 in. x 5/16 in. hex head cap screws and two 1/2 in. channel nuts. Space to suit O.D. of pipe and wrapping.
Safety factor of 5.
Safety factor of 5.
Design Load: 2350 lb.
Wt./C 59 lb.
Wt./C 106 lb.
Wt./C : 300 lb.
Do not use with back to back Strut
C728 Pipe Roller (Pair)
Adjustable Universal Support Support building services and access equipment on flat roofs and flat surfaces
Riser Kit Cat. No. AUS14-96 AUS-RISER-KIT A1200HS100PG H104-1/2X10EGC E145-1/2EGC E147-1/2EGC E148-1/2EGC
The T&B Adjustable Universal Support (AUS) provides an easy method for supporting pipes, conduit and equipment on flat roofs, below raised floors and even on level ground applications. The AUS reduces installation time compared to other support solutions such as wooden blocks, cement blocks, straps and clips. These labor intensive solutions also increase the danger of roof membrane penetration. The AUS system also allows for tool free adjustment of the pedestal height from 6 to 9 inches with a twist of the wrist. This ensures that the supported objects or pipes are uniformly supported and no high stress supports are carrying a disproportionate load in a single location.
w w w. t nb. c a
AUS-STRUT-KIT A1200HS100PG E142-1/2X200EGC E145-1/2EGC E147-1/2EGC E148-1/2EGC
Description Ajustable Universal Support (Base only)
Qty. 1
Riser Kit 14 in. strut 12 in. threaded rod Nut Washer Lock washer
1 2 8 8 4
Bolt Kit 14 in. strut Bolt Nut Washer Lock washer
1 2 2 4 2
AUS125PCSS6
4-1/2 in. stainless steel 316 strap (to restrain 1-1/4 in. pipe)
2
AUS150PCSS6
5 in. strap (to restrain 1-1/2 in. pipe)
2
AUS200PCSS6
6 in. strap (to restrain 2 in. pipe)
2
Bolt Kit
Straps
Pipe Grooves 12 in. Platform Adjustable Height Jackscrew Locking Mechanism Sturdy Jackscrew Base to Distribute Load Flexible PVC Mat to Eliminate Stress Points
A23
