7 SERIES FIXED
Owner’s Manual
INSTALLERS: PLEASE BE SURE TO LEAVE THIS MANUAL WITH THE OWNER. THANK YOU!
APPLY S/N STICKER HERE
LIMITED ONE YEAR WARRANTY ON SCREEN INNOVATIONS PRODUCTS Screen Innovations warrants its products, to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser provided they are properly operated according to Screen Innovations’ instructions and are not damaged due to improper handling or treatment after shipment from the factory. This warranty does not apply to equipment showing evidence of misuse, abuse, or accidental damage, or which has been tampered with or repaired by a person other than authorized Screen Innovations personnel. Screen Innovations’ sole obligation under this warranty shall be to repair or to replace (at Screen Innovations’ option) the defective part of the merchandise. Returns for service should be made to your Screen Innovations’ dealer. If it is necessary for the dealer to return the screen or part to Screen Innovations, transportation expenses to and from Screen Innovations are payable by the purchaser and Screen Innovations is not responsible for damage in shipment. To protect yourself against damage or loss in transit, insure the product and prepay all transportation expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES AS TO FITNESS FOR USE AND MERCHANT ABILITY. Any implied warranties of fitness for use, or merchantability, that may be mandated by statute or rule of law are limited to the one (1) year warranty period. This warranty gives you specific legal rights, and you may also have other rights, which vary from state-to-state. NO LIABILITY IS ASSUMED FOR EXPENSES OR DAMAGES RESULTING FROM INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE. In the event that there is a defect in materials or workmanship of a Screen Innovations product, you may contact our Sales Partners at 9715-B Burnet Road Suite 400, Austin, TX 78758, (512) 832-6939. IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND SCREEN INNOVATIONS SHALL NOT BE BOUND BY THIS WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH SCREEN INNOVATIONS’ WRITTEN INSTRUCTIONS. Keep your sales receipt to prove the date of purchase and your original ownership.
7 SERIES FIXED
512-832-6939
9715-B Burnet Road Suite 400, Austin,TX 78758
SCREENINNOVATIONS.COM
0316167F
3
7 SERIES FIXED
Projector Placement
4
7 SERIES FIXED
STANDARD
SPLIT
6
0316167F
11
5
Frame Installation
STANDARD
2X
1X Hardware Kit
1X
2X 6
1X
4X
STANDARD
0316167F
7
1
2
8
STANDARD
3
STANDARD
4
Finger tighten only at this point. Square the frame before final tightening of the set screws. 0316167F
9
5
STANDARD
A
B
A=B 6
Tighten the set screws using the provided tool after squaring the frame. DO NOT use an impact or drill to tighten!! You will damage the frame.
19
10
Frame Installation
SPLIT
2X
1X Hardware Kit
2X
4X 0316167F
1X
1X
4X
4X
4X
Larger screens are shipped with slot nuts, bolts, and vertical support bars. These must be installed on large, split frame screens, or wall brackets must be installed top and bottom.
11
SPLIT
12
1
SPLIT
Install the t-slot nuts in the horizontal frame pieces before installing the corner brackets.
2
0316167F
13
3 SPLIT
4
Finger tighten only at this point. Square the frame before final tightening of the set screws.
14
SPLIT
5
0316167F
6
15
6
SPLIT
A
7
B
A=B Tighten the set screws using the provided tool after squaring the frame. DO NOT use an impact or drill to tighten!! You will damage the frame.
19
16
BLACK DIAMOND
1
WHEN HANDLING AND UNROLLING THE BLACK DIAMOND MATERIAL DO NOT KINK IT! Once the material is kinked it is permanently damaged.
2
0316167F
17
BLACK DIAMOND 1.
4 3.
4.
2.
Starting in the middle of each horizontal and vertical, snap/bungee the middle of each side, then work your way outward, completing a side at a time.
5
18
Screen Mounting
STANDARD
SPLIT
21
23
Screen Mounting
1
0316167F
STANDARD
21
2
STANDARD
3
22
SPLIT
SPLIT - A
24
Use Split A mounting when vertical supports bars are not being installed.
SPLIT - B
26
Use Split B mounting when vertical support bars are being installed. 0316167F
23
Screen Mounting
A
1
X=
inch/cm
SPLIT
X X
X
2
Z - 1/4 =
inch/cm
(0.635 cm)
Z
24
Z
A
3
4
0316167F
SPLIT
5
25
Screen Mounting
1
2
26
B SPLIT
B
3
4
0316167F
SPLIT
5
27
NOTES:
9715-B Burnet Road Suite 400, Austin,TX 78758 Tel: 512-832-6939 Fax: 512-832-6136 www.screeninnovations.com