Flexcor® Wire Mesh Grips Index
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Fittings available in male straight, female straight, 45° and 90° designs for fast installation in all kinds of applications. No special installation tools required.
Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord Connector Strain Relief) protects connections from cable stress in damp applications.
Non-corrosive, double-weave stainless steel mesh (Deluxe Cord Grip) supports the cable, absorbs stress caused by flexure and vibration, as well as controls arc of cable.
Mesh readily expands for a wide range of cord diameters. CG610 Male Straight, Deluxe Cord Connectors Strain Relief
Rugged, easy-to-install and available in a wide range of sizes — our Flexcor ® Wire Mesh Strain Relief, Cable-Pulling, and Cable-Support Grips are engineered to take some of the strain off of you.
Index Device Applications Product Description Split Support Grip Lace & Rod Mesh Termination Strain Relief Deluxe Cord Grips Strain Relief Grips Strain Relief Liquid-Tight Grips Support Grips Standard-Duty, Closed Mesh Support Grips Standard-Duty, Split Lace Support Grips Standard-Duty, Split Rod Support Grips Heavy-Duty Support Grips Service & Bus Drop Support Grips Fiber Optic Pulling Grips Junior- & Light-Duty Pulling Grips Medium-Duty Pulling Grips Heavy-Duty Pulling Grips Multi-Weave Pulling Grips High Strength & Fiber Optic Pulling Grips Slack Selecting Properly Sized Pulling & Support Grips Pulling & Support Grips Strength Information
Page Number K-2, K-3 K-4 K-5 K-6 K-7 K-8 K-9 K-10 K-11 K-12 K-13 K-14 K-15 K-16 K-17 K-18 K-19 K-20 K-21, K-22 K-23
K-1
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Applications
Liquid-Tight Conduit Grip Strain Relief (page K-8)
Bus/Service Drop Support Grip (page K-13)
Liquid-Tight Conduit Grip Strain Relief (page K-8)
Deluxe Cord Grip Strain Relief (page K-6)
Bus/Service Drop Support Grip (page K-13)
Deluxe Cord Grip Strain Relief (page K-6)
Medium/Heavy-Duty Support Grip (pages K-16, K-17)
Service Drop Support Grip (page K-13)
Applications
For assistance in selecting Flexcor® Wire Mesh Grips, see pages K-21 – K-23.
K-2
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Applications
High Strength Pulling Grip (page K-19)
Deluxe Cord Grip Strain Relief (page K-6)
Bus Drop Support Grip (page K-13)
Deluxe Cord Grip Strain Relief (page K-6)
AIR
Deluxe Cord Grip Strain Relief (page K-6) Heavy-Duty Underground Pulling Grip (page K-17
K-3
Applications
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Product Description Application
Flexcor® Wire Mesh Grips are used to support cable or conductor after it has been installed, pull electrical cable or conductor into place, provide strain relief at the point of wiring connections. Flexcor® devices protect cables, relieve stress, and prevent cable pull-out from fittings and terminations.
Support Grip Attachments
Double Eye
Single Eye
Offset Eye
Locking Bail Eye
Available in four different attachments. Load is distributed over entire length of grip and will not injure cable.
Strain Relief Grip Fittings Male Straight
Female Straight
Male 45˚
Male 90˚
Prevents pull-out or damage to cable due to constant motion or flexing. Also for Liquid-Tight, hose and box connections.
Pulling Grips Flexible Eye
Support Grip Mesh Types
Product Description
Closed Mesh
Split Lace Mesh Split Rod Mesh
Rotating Eye
Assortment of rugged pulling grips available individually or in kits to make wire pulling easier.
Available in three types and depends on availability of wire end.
K-4
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Pulling Grips Junior-Duty & Light-Duty Description Junior-duty series grips are indispensable tools for electricians with small job requirements. They are used to connect insulated wire bundles to pulling tape or to pull wire or rope through conduit. Catalog Number
Cable Diameter Range
Mesh Length
Approximate Break Strength*
5" 7" 8" 10" 10" 12"
1,700 lbs. 1,700 lbs. 1,700 lbs. 2,800 lbs. 4,100 lbs. 4,100 lbs.
Junior-Duty, Flexible Eye PJ25 PJ37 PJ50 PJ62 PJ75 PJ100
0.250"-0.360" 0.370"-0.490" 0.500"-0.610" 0.620"-0.740" 0.750"-0.990" 1.000"-1.240"
*To determine workload safety factor, divide approximate break strength by 5. See Page K-23 for strength information.
Junior-Duty Flexible Eye
Description Light-Duty grips are the most economical pulling grips for many applications, such as industrial plant wiring, and rewiring, and underground electrical pulls.
Catalog Number
Cable Diameter Range
Mesh Length
Approximate Break Strength*
Light-Duty, Short Length, Flexible Eye 0.500"-0.610" 0.620"-0.740" 0.750"-0.990" 1.000"-1.240" 1.250"-1.490" 1.500"-1.740" 1.750"-1.990" 2.000"-2.490" 2.500"-2.990"
11" 11" 13" 14" 15" 16" 18" 19" 19"
3,400 lbs. 4,100 lbs. 4,100 lbs. 5,800 lbs. 5,800 lbs. 7,500 lbs. 10,000 lbs. 10,000 lbs. 13,000 lbs.
Light-Duty Short Length Flexible Eye
Light-Duty, Standard Length, Flexible Eye PL0622 PL0752 PL1002 PL1252 PL1502 PL2002 PL2502 PL3002
0.620"-0.740" 0.750"-0.990" 1.000"-1.240" 1.250"-1.490" 1.500"-1.990" 2.000"-2.490" 2.500"-2.990" 3.000"-3.490"
16" 20" 20" 22" 25" 26" 28" 30"
4,100 lbs. 4,100 lbs. 7,500 lbs. 7,500 lbs. 7,500 lbs. 10,000 lbs. 13,000 lbs. 16,200 lbs..
*To determine workload safety factor, divide approximate break strength by 5. See Page K-23 for strength information.
Catalog Number
Description
Junior-Duty, Flexible Eye Kit PJ1KIT
Kit contains 1 each of PJ25, PJ37, PJ50, PJ62, PJ75, PJ100
PJ1KIT
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
K-15
Pulling Grips Junior-Duty & Light-Duty
PL0501 PL0621 PL0751 PL1001 PL1251 PL1501 PL1751 PL2001 PL2501
Flexcor ® Wire Mesh Grips
Fittings available in male straight, female straight, 45° and 90° designs for fast installation in all kinds of applications. No special installation tools required.
Corrosion-resistant, die cast aluminum fitting with watertight seal (Deluxe Cord Connector Strain Relief) protects connections from cable stress in damp applications.
Non-corrosive, double-weave stainless steel mesh (Deluxe Cord Grip) supports the cable, absorbs stress caused by flexure and vibration, as well as controls arc of cable.
Mesh readily expands for a wide range of cord diameters. CG610 Male Straight, Deluxe Cord Connectors Strain Relief
Rugged, easy-to-install and available in a wide range of sizes — our Flexcor ® Wire Mesh Strain Relief, Cable-Pulling, and Cable-Support Grips are engineered to take some of the strain off of you.
Index Device Applications Product Description Split Support Grip Lace & Rod Mesh Termination Strain Relief Deluxe Cord Grips Strain Relief Grips Strain Relief Liquid-Tight Grips Support Grips Standard-Duty, Closed Mesh Support Grips Standard-Duty, Split Lace Support Grips Standard-Duty, Split Rod Support Grips Heavy-Duty Support Grips Service & Bus Drop Support Grips Fiber Optic Pulling Grips Junior- & Light-Duty Pulling Grips Medium-Duty Pulling Grips Heavy-Duty Pulling Grips Multi-Weave Pulling Grips High Strength & Fiber Optic Pulling Grips Slack Selecting Properly Sized Pulling & Support Grips Pulling & Support Grips Strength Information
Page Number K-2, K-3 K-4 K-5 K-6 K-7 K-8 K-9 K-10 K-11 K-12 K-13 K-14 K-15 K-16 K-17 K-18 K-19 K-20 K-21, K-22 K-23
K-1
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Applications
Liquid-Tight Conduit Grip Strain Relief (page K-8)
Bus/Service Drop Support Grip (page K-13)
Liquid-Tight Conduit Grip Strain Relief (page K-8)
Deluxe Cord Grip Strain Relief (page K-6)
Bus/Service Drop Support Grip (page K-13)
Deluxe Cord Grip Strain Relief (page K-6)
Medium/Heavy-Duty Support Grip (pages K-16, K-17)
Service Drop Support Grip (page K-13)
Applications
For assistance in selecting Flexcor® Wire Mesh Grips, see pages K-21 – K-23.
K-2
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Applications
High Strength Pulling Grip (page K-19)
Deluxe Cord Grip Strain Relief (page K-6)
Bus Drop Support Grip (page K-13)
Deluxe Cord Grip Strain Relief (page K-6)
AIR
Deluxe Cord Grip Strain Relief (page K-6) Heavy-Duty Underground Pulling Grip (page K-17
K-3
Applications
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Product Description Application
Flexcor® Wire Mesh Grips are used to support cable or conductor after it has been installed, pull electrical cable or conductor into place, provide strain relief at the point of wiring connections. Flexcor® devices protect cables, relieve stress, and prevent cable pull-out from fittings and terminations.
Support Grip Attachments
Double Eye
Single Eye
Offset Eye
Locking Bail Eye
Available in four different attachments. Load is distributed over entire length of grip and will not injure cable.
Strain Relief Grip Fittings Male Straight
Female Straight
Male 45˚
Male 90˚
Prevents pull-out or damage to cable due to constant motion or flexing. Also for Liquid-Tight, hose and box connections.
Pulling Grips Flexible Eye
Support Grip Mesh Types
Product Description
Closed Mesh
Split Lace Mesh Split Rod Mesh
Rotating Eye
Assortment of rugged pulling grips available individually or in kits to make wire pulling easier.
Available in three types and depends on availability of wire end.
K-4
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
Flexcor ® Wire Mesh Grips
Flexcor ® Wire Mesh Grips
Pulling Grips Junior-Duty & Light-Duty Description Junior-duty series grips are indispensable tools for electricians with small job requirements. They are used to connect insulated wire bundles to pulling tape or to pull wire or rope through conduit. Catalog Number
Cable Diameter Range
Mesh Length
Approximate Break Strength*
5" 7" 8" 10" 10" 12"
1,700 lbs. 1,700 lbs. 1,700 lbs. 2,800 lbs. 4,100 lbs. 4,100 lbs.
Junior-Duty, Flexible Eye PJ25 PJ37 PJ50 PJ62 PJ75 PJ100
0.250"-0.360" 0.370"-0.490" 0.500"-0.610" 0.620"-0.740" 0.750"-0.990" 1.000"-1.240"
*To determine workload safety factor, divide approximate break strength by 5. See Page K-23 for strength information.
Junior-Duty Flexible Eye
Description Light-Duty grips are the most economical pulling grips for many applications, such as industrial plant wiring, and rewiring, and underground electrical pulls.
Catalog Number
Cable Diameter Range
Mesh Length
Approximate Break Strength*
Light-Duty, Short Length, Flexible Eye 0.500"-0.610" 0.620"-0.740" 0.750"-0.990" 1.000"-1.240" 1.250"-1.490" 1.500"-1.740" 1.750"-1.990" 2.000"-2.490" 2.500"-2.990"
11" 11" 13" 14" 15" 16" 18" 19" 19"
3,400 lbs. 4,100 lbs. 4,100 lbs. 5,800 lbs. 5,800 lbs. 7,500 lbs. 10,000 lbs. 10,000 lbs. 13,000 lbs.
Light-Duty Short Length Flexible Eye
Light-Duty, Standard Length, Flexible Eye PL0622 PL0752 PL1002 PL1252 PL1502 PL2002 PL2502 PL3002
0.620"-0.740" 0.750"-0.990" 1.000"-1.240" 1.250"-1.490" 1.500"-1.990" 2.000"-2.490" 2.500"-2.990" 3.000"-3.490"
16" 20" 20" 22" 25" 26" 28" 30"
4,100 lbs. 4,100 lbs. 7,500 lbs. 7,500 lbs. 7,500 lbs. 10,000 lbs. 13,000 lbs. 16,200 lbs..
*To determine workload safety factor, divide approximate break strength by 5. See Page K-23 for strength information.
Catalog Number
Description
Junior-Duty, Flexible Eye Kit PJ1KIT
Kit contains 1 each of PJ25, PJ37, PJ50, PJ62, PJ75, PJ100
PJ1KIT
Most Flexcor products have UL and/or CSA Approvals. Please contact factory for approval information.
K-15
Pulling Grips Junior-Duty & Light-Duty
PL0501 PL0621 PL0751 PL1001 PL1251 PL1501 PL1751 PL2001 PL2501
