FLEXpower⢠THREE - Warren PR
FLEXpower THREE ™
Fully Pre-Wired Triple Inverter System
Factory Tested, Pre-Wired and Pre-Configured Fast Installation With a Pre-Assembled System Field-Configurable Settings Optimized System Footprint 9kW and 10.8kW Standard Configurations All Components Carry Necessary ETL Certifications A/C Cabinet to Use as Distributed Load Panel Ample AC and DC Breaker Provisions (FP3 Allows for 20 Additional AC Breakers and 6 DC Breakers)
OPTICS RE Compatible
Each 48V System is Offered with Sealed or Vented Inverters
System Monitoring Via Web Interface with OPTICS RE
OutBack pre-assembled, pre-wired and pre-tested FLEXpower THREE systems take the concept of fast, easy installation to a new level of performance, value and flexibility. The FLEXpower THREE system is designed for 120/208VAC, 60Hz off-grid commercial, backup and three-phase applications with medium sized power requirements. FLEXpower THREE systems are offered in 9kW and 10.8kW configurations. With a compact design and an easy-to-install mounting plate, OutBack’s FLEXpower Systems can mount in a horizontal or vertical orientation to allow for proper installation and ventilation in more space-limited locations. The sealed inverter/charger is ideal for use in harsh or corrosive environments.
The FLEXpower THREE is equipped with battery and PV array breakers, an Input-Output-Bypass assembly, mounting locations for AC GFCI Type B style outlets, (3) 500A 50mV DC shunts with attached terminal bus bar, and additional AC breakers. FLEXpower components carry all of the necessary ETL Certifications allowing for a code-compliant installation that saves both time and money while allowing for an aestheticallypleasing install. System monitoring through any internet –enabled device available with OPTICS RE application setup.
OutBack reserves the right to make changes to the products and information contained in this document without notice. Copyright © 2014 OutBack Power. All Rights Reserved. OutBack is a registered trademark of The Alpha Group.
FLEXpower THREE Specifications* For 120/208VAC 60Hz Applications Description
10/2014
Inverter(s)
FW-X240 Bypass
Charge Controller
Inverter OCPD
PV OCPD**
FP3 FX3048T
Triple FX3048T 9kW FLEXpower THREE
(3) FX3048T
—
208VAC Bypass
(3) FLEXmax 80
175A
80A
FP3 VFX3648
Triple VFX3648 10.8kW FLEXpower THREE
(3) VFX3648
—
208VAC Bypass
(3) FLEXmax 80
175A
80A
*All pre-wired systems include FX/VFX inverter/chargers FLEXmax 80 charge controllers, MATE3 system display and communications, FLEXnet DC system monitor, AC and DC wiring boxes, HUB 10.3 communications, surge protector and remote temperature sensor. The FP3 is also equipped with battery and PV array breakers, Input-Output-Bypass assembly, additional AC breakers and mounting for MATE3 and charge controllers. Additional configurations available. ** Overcurrent protective device.
OutBack FLEXpower Three Finished Dimensions (drawing not to scale)
FP3 Finished Dimensions (drawing not to scale)
AC OUT HOT LEG 1
AC OUT HOT LEG 2
1" mounting strip all sides
AC OUT HOT LEG 3
` 13" Panel Depth (Both L & R Panels)
44"
DRAWN: CHK:
7.75"
38.675"
12"
58.425"
Latin America
17825 59th Ave NE Arlington, WA 98223
SCALE:
A v a i la b le F r o m
Worldwide Corporate Offices North America
MAM 11/4/13
The designs represented herein are for reference purposes only TITLE: and require engineering review before site specific application. FP3 Finished Dimensions These drawings are the property of OutBack Power and shall not be SIZE DRAWING NO. copied or used without written consent.
Europe
Asia Pacific
Tel: +1 360.435.6030 Tel: +1 561.792.9651 Tel: +49 9122.79889.0 Tel: +852 2736.8663 Fax: +1 360.435.6019 Fax: +1 561.792.7157 Fax: +49 9122.79889.21 Fax: +852 2199.7988
REV 2
PAGE 1 of 1
Fully Pre-Wired Triple Inverter System
Factory Tested, Pre-Wired and Pre-Configured Fast Installation With a Pre-Assembled System Field-Configurable Settings Optimized System Footprint 9kW and 10.8kW Standard Configurations All Components Carry Necessary ETL Certifications A/C Cabinet to Use as Distributed Load Panel Ample AC and DC Breaker Provisions (FP3 Allows for 20 Additional AC Breakers and 6 DC Breakers)
OPTICS RE Compatible
Each 48V System is Offered with Sealed or Vented Inverters
System Monitoring Via Web Interface with OPTICS RE
OutBack pre-assembled, pre-wired and pre-tested FLEXpower THREE systems take the concept of fast, easy installation to a new level of performance, value and flexibility. The FLEXpower THREE system is designed for 120/208VAC, 60Hz off-grid commercial, backup and three-phase applications with medium sized power requirements. FLEXpower THREE systems are offered in 9kW and 10.8kW configurations. With a compact design and an easy-to-install mounting plate, OutBack’s FLEXpower Systems can mount in a horizontal or vertical orientation to allow for proper installation and ventilation in more space-limited locations. The sealed inverter/charger is ideal for use in harsh or corrosive environments.
The FLEXpower THREE is equipped with battery and PV array breakers, an Input-Output-Bypass assembly, mounting locations for AC GFCI Type B style outlets, (3) 500A 50mV DC shunts with attached terminal bus bar, and additional AC breakers. FLEXpower components carry all of the necessary ETL Certifications allowing for a code-compliant installation that saves both time and money while allowing for an aestheticallypleasing install. System monitoring through any internet –enabled device available with OPTICS RE application setup.
OutBack reserves the right to make changes to the products and information contained in this document without notice. Copyright © 2014 OutBack Power. All Rights Reserved. OutBack is a registered trademark of The Alpha Group.
FLEXpower THREE Specifications* For 120/208VAC 60Hz Applications Description
10/2014
Inverter(s)
FW-X240 Bypass
Charge Controller
Inverter OCPD
PV OCPD**
FP3 FX3048T
Triple FX3048T 9kW FLEXpower THREE
(3) FX3048T
—
208VAC Bypass
(3) FLEXmax 80
175A
80A
FP3 VFX3648
Triple VFX3648 10.8kW FLEXpower THREE
(3) VFX3648
—
208VAC Bypass
(3) FLEXmax 80
175A
80A
*All pre-wired systems include FX/VFX inverter/chargers FLEXmax 80 charge controllers, MATE3 system display and communications, FLEXnet DC system monitor, AC and DC wiring boxes, HUB 10.3 communications, surge protector and remote temperature sensor. The FP3 is also equipped with battery and PV array breakers, Input-Output-Bypass assembly, additional AC breakers and mounting for MATE3 and charge controllers. Additional configurations available. ** Overcurrent protective device.
OutBack FLEXpower Three Finished Dimensions (drawing not to scale)
FP3 Finished Dimensions (drawing not to scale)
AC OUT HOT LEG 1
AC OUT HOT LEG 2
1" mounting strip all sides
AC OUT HOT LEG 3
` 13" Panel Depth (Both L & R Panels)
44"
DRAWN: CHK:
7.75"
38.675"
12"
58.425"
Latin America
17825 59th Ave NE Arlington, WA 98223
SCALE:
A v a i la b le F r o m
Worldwide Corporate Offices North America
MAM 11/4/13
The designs represented herein are for reference purposes only TITLE: and require engineering review before site specific application. FP3 Finished Dimensions These drawings are the property of OutBack Power and shall not be SIZE DRAWING NO. copied or used without written consent.
Europe
Asia Pacific
Tel: +1 360.435.6030 Tel: +1 561.792.9651 Tel: +49 9122.79889.0 Tel: +852 2736.8663 Fax: +1 360.435.6019 Fax: +1 561.792.7157 Fax: +49 9122.79889.21 Fax: +852 2199.7988
REV 2
PAGE 1 of 1
