FlowMaster⢠Hydraulic Pump
FlowMaster™ Hydraulic Pump Rotary-Driven, Powerful and Versatile
FlowMaster: A high-performance pump that works in the severest conditions. Built in Flexibility allows a wide range of applications
A New Generation of Lubrication Pumps
▲
▲
Pressure Gauge
▲
3/8 NPTF Inlet Port
3/8 NPTF Tank Port return
▲
▲
▲
496
▲
▲ ▲
1/4 NPTF Pump Outlets
▲
▲ B
B
A
A
▲
▲
▲
▲
▲
▲ 383
▲
▲
32
Dimensions of pumps
Dimensions of pump assemblies
Available Models
Pump Performance and Specifications Supply inlet hydr. pressure, max.
200 bar
Model
Operating inlet hydr. pressure
20 to 32 bar
Description
Hydraulic inlet flow Pump ratio with manifold
(mm)
(mm)
Up to 28 l/min
85487
60 lb. pump assembly for Centro-Matic Systems
505
743
9:1 at low inlet pressure (20 to
86258
60 lb. pump assembly with low level and
505
743
505
743
25 bar) and low inlet flow
follower plate for Centro-Matic Systems
(below 7 lpm) pump ratio
85491
approaches 11:1 ratio at higher Operating temperature
Dimension A Dimension B
60 lb. drum pump assembly with low level and follower plate for Progressive Systems
inlet pressure and flow
85482
Pump for 400 lb. drum (55 gallon/200 l)
864
1113
-10° to +65°C
85480
Pump for 120 lb. drum (18 gallon)
699
948
85481
Pump for 60 lb. canister (8 gallon)
483
732
348
597
Operating voltage (electric switch) 24 VDC Output
115 – 735 cm3/min.
85483
Pump for 35 lb. pail (5 gallon)
Max. hydraulic fluid temp.
55°C
252725
Follower plate for 35 lb. unit
—
—
Weight of Pump only
16 kg
85489
Follower plate for 60 lb. unit
—
—
Heinrich-Hertz-Straße 2-8 D-69190 Walldorf Germany
Telefon +49.6227.33.0 Fax +49.6227.33.259 www.lincolnindustrial.com
Form W-102-A-0500 © Copyright 2000 Printed in Germany
Printed on 100% Recycling Paper.
▲
231
cylinder allowing better grease flow to the pump chamber. The FlowMaster’s impressive output range make it ideal for small mobile equipment with low lubricant requirements to machinery with the highest lubricant demands.
▲
▲
117
▲
The pump works well with high-viscosity grease (NLGI 2 and above) at low temperatures because it’s pump tube has a special pre-charge chamber and a reciprocating cylinder designed to allow better priming. An inlet ball check reciprocates with the pump
▲
291 242
▲▲
▲
The compact FlowMaster is versatile because its unique rotary drive and control manifold let users adjust the pump to fit their applications exactly. Extreme temperatures won’t stop the pump. It has passed rigorous test in both arctic and desert conditions.
FlowMaster: A high-performance pump that works in the severest conditions. Built in Flexibility allows a wide range of applications
A New Generation of Lubrication Pumps
▲
▲
Pressure Gauge
▲
3/8 NPTF Inlet Port
3/8 NPTF Tank Port return
▲
▲
▲
496
▲
▲ ▲
1/4 NPTF Pump Outlets
▲
▲ B
B
A
A
▲
▲
▲
▲
▲
▲ 383
▲
▲
32
Dimensions of pumps
Dimensions of pump assemblies
Available Models
Pump Performance and Specifications Supply inlet hydr. pressure, max.
200 bar
Model
Operating inlet hydr. pressure
20 to 32 bar
Description
Hydraulic inlet flow Pump ratio with manifold
(mm)
(mm)
Up to 28 l/min
85487
60 lb. pump assembly for Centro-Matic Systems
505
743
9:1 at low inlet pressure (20 to
86258
60 lb. pump assembly with low level and
505
743
505
743
25 bar) and low inlet flow
follower plate for Centro-Matic Systems
(below 7 lpm) pump ratio
85491
approaches 11:1 ratio at higher Operating temperature
Dimension A Dimension B
60 lb. drum pump assembly with low level and follower plate for Progressive Systems
inlet pressure and flow
85482
Pump for 400 lb. drum (55 gallon/200 l)
864
1113
-10° to +65°C
85480
Pump for 120 lb. drum (18 gallon)
699
948
85481
Pump for 60 lb. canister (8 gallon)
483
732
348
597
Operating voltage (electric switch) 24 VDC Output
115 – 735 cm3/min.
85483
Pump for 35 lb. pail (5 gallon)
Max. hydraulic fluid temp.
55°C
252725
Follower plate for 35 lb. unit
—
—
Weight of Pump only
16 kg
85489
Follower plate for 60 lb. unit
—
—
Heinrich-Hertz-Straße 2-8 D-69190 Walldorf Germany
Telefon +49.6227.33.0 Fax +49.6227.33.259 www.lincolnindustrial.com
Form W-102-A-0500 © Copyright 2000 Printed in Germany
Printed on 100% Recycling Paper.
▲
231
cylinder allowing better grease flow to the pump chamber. The FlowMaster’s impressive output range make it ideal for small mobile equipment with low lubricant requirements to machinery with the highest lubricant demands.
▲
▲
117
▲
The pump works well with high-viscosity grease (NLGI 2 and above) at low temperatures because it’s pump tube has a special pre-charge chamber and a reciprocating cylinder designed to allow better priming. An inlet ball check reciprocates with the pump
▲
291 242
▲▲
▲
The compact FlowMaster is versatile because its unique rotary drive and control manifold let users adjust the pump to fit their applications exactly. Extreme temperatures won’t stop the pump. It has passed rigorous test in both arctic and desert conditions.
