For Use With PANDUIT Wyr-Grid PATHWAY SYSTEMS Wyr-Grid ...

For Use With PANDUIT Wyr-Grid PATHWAY SYSTEMS

     

Wyr-Grid Pathway Splices

 

Panduit Part Number: WGSPL1218**, WGSPL2430**

   

INSTALLATION INSTRUCTIONS © 2010 PANDUIT Corp.

  

PANDUIT CATALOG NUMBER

 

Wyr-Grid PATHWAY

WGSPL1218**                      WG12**10                                                  WG18**10    WGSPL2430**                      WG24**10                                                  WG30**10 

     

Note: When Pathway Line Wires are cut in the field, maximum over hang should not exceed more than .100”

WGSPL1218**

 

 

 

  1 

 

 

WGSPL2430**

Installing Side Splices on Pathway of all widths

   

2 

Installing Center Splices On 24” & 30” wide Pathways

   

Pull Up and Out

Engage Spring Tabs   In four locations

     

4

 

Note: Install Center Splices on nd 2 top wire in from each side

         

Engage Bonding Screw Utilizing a 9/16” socket

3 

Torque Specifications: 80 inch-pounds [9.0 N٠m] Note: Electrical Bonding is maintained if screw strips out.

Spring Tabs Side Splice

 

     

For Technical Assistance, Call: 800-777-3300

Wyr-Grid Intersection Splice

   

Panduit Part Number: WGINTSPL**

INSTALLATION INSTRUCTIONS PANDUIT CATALOG NUMBER

1

Wyr-Grid PATHWAY Any Combination Of WG12**10 WG18**10 WG24**10 WG30**10

WGINSTSPL**

Place Intersection Splices On main trunk

2

 

3 Slide to approximate width of Intersecting Pathway

4 

Note: Pathway is placed on outside space of the Intersection Splice Spring Tabs

5 Spring Tab should be engaged to Prevent Pathway from lifting out Of Intersection Splice

 

Tighten until Seated With no gaps

Engage Bonding Screw Utilizing a 9/16” socket

Instruction Sheet RW273

 

WORLDWIDE SUBSIDIARIES AND SALES OFFICES   18900 Panduit Drive Tinley Park, IL 60487 Web Site: www.panduit.com

RACK SYSTEMS DIVISION

Fax: 708‐532‐1811  Technical Support: 800‐777‐3300  E‐mail: [email protected]