FRP/NGF250 Graphic Medallion Removal & Installation
1/11
Instructions Subject: FRP/NGF250 Graphic Medallion Removal & Installation The graphic medallions on the FRP-250 & NGF-250 are made out of a flexible duratran that can be removed/replaced from the front of the unit without the use of tools (back-lit merchandiser light box does not need to be removed from the unit). FRP-250
NGF-250
MEDALLION REMOVAL 1. With Palm of hand slide graphic to the left to expose narrow seam on right edge. 2. In the newly exposed gap, peel the medallion out toward you and grasp the right edge of graphic while pulling / flexing it toward you to release the 3 upper and lower tabs. 3. Continue to pull graphic toward you while slightly moving it to the right to release the rest of the graphic from the left side of the merchandiser until the medallion is completely free from the merchandiser.
1
2
3
MEDALLION INSTALLATION 1. Facing the unit, start slightly off center to the right of the merchandiser medallion area by holding the graphic medallion with one hand on each side at about the 9 & 3 o’clock position. Slide / insert the 3 bottom tabs under the bottom edge of the merchandiser. 2. With the bottom tabs in place with push down on the top of the medallion flexing it into a slight “C” shape so the top 3 tabs can be inserted under the top edge of the merchandiser. 3. With the top tabs in place smooth the medallion out of the “C” shape and use the palm of you hand to seat the graphic under the left and right edges.
1
2
3
Manitowoc Beverage Systems Sellersburg, 2100 Future Drive, Sellersburg, IN 47172, Tel: 812-246-7000, www.manitowocbeverage.com
Instructions Subject: FRP/NGF250 Graphic Medallion Removal & Installation The graphic medallions on the FRP-250 & NGF-250 are made out of a flexible duratran that can be removed/replaced from the front of the unit without the use of tools (back-lit merchandiser light box does not need to be removed from the unit). FRP-250
NGF-250
MEDALLION REMOVAL 1. With Palm of hand slide graphic to the left to expose narrow seam on right edge. 2. In the newly exposed gap, peel the medallion out toward you and grasp the right edge of graphic while pulling / flexing it toward you to release the 3 upper and lower tabs. 3. Continue to pull graphic toward you while slightly moving it to the right to release the rest of the graphic from the left side of the merchandiser until the medallion is completely free from the merchandiser.
1
2
3
MEDALLION INSTALLATION 1. Facing the unit, start slightly off center to the right of the merchandiser medallion area by holding the graphic medallion with one hand on each side at about the 9 & 3 o’clock position. Slide / insert the 3 bottom tabs under the bottom edge of the merchandiser. 2. With the bottom tabs in place with push down on the top of the medallion flexing it into a slight “C” shape so the top 3 tabs can be inserted under the top edge of the merchandiser. 3. With the top tabs in place smooth the medallion out of the “C” shape and use the palm of you hand to seat the graphic under the left and right edges.
1
2
3
Manitowoc Beverage Systems Sellersburg, 2100 Future Drive, Sellersburg, IN 47172, Tel: 812-246-7000, www.manitowocbeverage.com
