Fujitsu LifeBook N3510 Hinge Cover Replacement
Fujitsu LifeBook N3510 Hinge Cover Replacement
Fujitsu LifeBook N3510 Hinge Cover Replacement 撰写者: Neil Daniels
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
介绍 The hinge cover has the computer power button, wireless switch, and volume toggle.
工具: Spudger (1) Phillips #0 Screwdriver (1) Phillips #1 Screwdriver (1) Magnetic Project Mat (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 1 — Battery
Start by locating the two clips on the bottom of the computer that support the battery.
Use your fingers to push the clips inward and then upward.
Lift the battery out of the computer.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 3 — Hinge Cover
Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.
步骤 4
© iFixit — CC BY-NC-SA
zh.iFixit.com
Lay the computer flat on a stable surface with the monitor pointing away from you.
4 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 5
Use a spudger to partially lift the hinge cover.
步骤 6
The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.
Lift the hinge cover out of place enough to expose the ribbon cable.
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 7
Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-01 11:32:32 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement 撰写者: Neil Daniels
© iFixit — CC BY-NC-SA
zh.iFixit.com
1 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
介绍 The hinge cover has the computer power button, wireless switch, and volume toggle.
工具: Spudger (1) Phillips #0 Screwdriver (1) Phillips #1 Screwdriver (1) Magnetic Project Mat (1)
© iFixit — CC BY-NC-SA
zh.iFixit.com
2 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 1 — Battery
Start by locating the two clips on the bottom of the computer that support the battery.
Use your fingers to push the clips inward and then upward.
Lift the battery out of the computer.
步骤 2
© iFixit — CC BY-NC-SA
zh.iFixit.com
3 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 3 — Hinge Cover
Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.
步骤 4
© iFixit — CC BY-NC-SA
zh.iFixit.com
Lay the computer flat on a stable surface with the monitor pointing away from you.
4 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 5
Use a spudger to partially lift the hinge cover.
步骤 6
The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.
Lift the hinge cover out of place enough to expose the ribbon cable.
© iFixit — CC BY-NC-SA
zh.iFixit.com
5 / 6 页
Fujitsu LifeBook N3510 Hinge Cover Replacement
步骤 7
Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.
To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-01 11:32:32 PM。
© iFixit — CC BY-NC-SA
zh.iFixit.com
6 / 6 页
