Fujitsu Siemens Amilo Pro Keyboard Replacement

Fujitsu Siemens Amilo Pro Keyboard Replacement

Fujitsu Siemens Amilo Pro Keyboard Replacement Written By: Jeremy Scalpello

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Fujitsu Siemens Amilo Pro Keyboard Replacement

INTRODUCTION A repair manual for the Fujitsu Siemens Amilo Pro 2010 and 2020 and 2030 which shows you how to replace the keyboard!

TOOLS: Flathead 3/32" or 2.5 mm Screwdriver (1) Phillips #1 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Fujitsu Siemens Amilo Pro Keyboard Replacement

Step 1 — Keyboard 

Remove AC adapter and battery.

 Battery: pull the latch with a battery symbol beside it.

Step 2 

Use a flat head screwdriver to pry out the hinge cover.

 (Caution do not pull to hard as this could snap the plastic!)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Fujitsu Siemens Amilo Pro Keyboard Replacement

Step 3 

Remove the one screw holding in the keyboard.



Pull the keyboard up towards you.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Fujitsu Siemens Amilo Pro Keyboard Replacement

Step 5 

Pull the ribbon cable and the keyboard will come out.

 (Caution this ribbon is very delicate)

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-21 06:57:22 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5