Full Motion LED, LCD TV Wall Mount - Displays2go
INSTALLATION MANUAL 7. Adjustment
Full Motion LED, LCD TV Wall Mount
80°
+15° -15°
+5°
-5 °
Adjust to desired position or tilt.
8. Install curved TV WALL VESA HOLE
VESA Horizontal LINE
400*400VESA Curved TV
The curved deepth is aroud 10~15mm from VESA horizontal line.
NOTE:To install curved TV,please use "M8*30 screw+big spacer(15mm) or big&small(20mm) Spacer together” NOTE:To install curved TV,please use "M8*50 screw+big&big spacer(30mm) or big&big&small spacer(35mm) or big&big&small&small(40mm) Spacer together”
M8x30MM Screw+ M8x15MM Spacer or M8x20MM Spacer M8x50MM Screw+ M8x30MM Spacer or M8x35MM Spacer or M8x40MM Spacer or M-D
M-I
M-G
or M-H
M-I
or
M-D
M-G
M-E
M-I
M-G
M-I
M-E
M-G
M-H
M-I
Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions.
7
CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
or M-H
M-E
M-G
100x 1 00/200x 1 00 200x200/300x300 400x200/400x400
55" MAX
30kg (66lbs) RATED
ISSUED: APR. 2014
NOTE: Read the entire instruction manual before you start installation and assembly.
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
WARNING • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
VESA adapter (x 2 ) B
• This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
M8x15 (x4) C
wall mount A
• This product should only be installed by someone with good mechanical ability who has basic building experience and fully understands this manual. • Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
M8 nut (x4) D
Allen key (x1) E
wrench (x1) F
Package M
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended. • Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
M5x14 (x4) M-A
M6x14 (x4) M-B
M8x30 (x4) M-D
M6x30 (x4) M-C
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces their holding power. • This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
M8x50 (x4) M-E
D5 washer (x4) M-F
D8 washer (x4) M-G
small spacer (x8) M-H
big spacer (x8) M-I
Package W
ST6.3x55 (x6) W-A
1
concrete anchor (x6) W-B
D6 washer (x6) W-C
2
1. Separating the Plastic Covers and the VESA Plate
2b. For Solid Brick and Concrete Mounting 60mm (2.4") ø 10mm (ø 3/8")
2
1
Mark the exact location of mounting holes
Drill pilot holes
2a. For Wood Stud Wall Mounting 55mm (2.2")
√ W-B
ø 4.5mm (ø 3/16")
1
W-C
X
X
W-A
3
2
Find and mark the exact location of mounting holes
Screw the wall mount onto the wall
Drill pilot holes
With the arrow pointing upward
√
X
X WARNING Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
W-C W-A
X
Screw the wall mount onto the wall
3. Installing the Plastic Covers
4. Assembling the VESA Plate
With the arrow pointing upward D
WARNING • Make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.
C
• Installers are responsible to provide hardware for other types of mounting situations. • Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
3
4
5. Installing the VESA Plate M-C M-D
M-E
M-H Top of the display
M-I
M-I
M-G For Max VESA 200x200
For Max VESA 400x400
M-G
or
M-E
M-E 5-1 For Flat Back Screens M-H
TV
M-H
TV
TV
M-I
M-I
M-G
M-F M-G
M-F M-G M-A M-B
or
M-G
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen. · Screw the VESA plate onto the display. Tighten all screws but do not over tighten.
6. Hanging the Display onto the Wall Mount M-A M-B
5-2 For Recessed Back Screens or to Access A/V Inputs
TV
TV
F
TV
M-C M-D
M-C M-D
M-H
or M-I
M-G
5
M-G
• Level the display . • Place the lower nut, tighten both nuts.
6
Full Motion LED, LCD TV Wall Mount
80°
+15° -15°
+5°
-5 °
Adjust to desired position or tilt.
8. Install curved TV WALL VESA HOLE
VESA Horizontal LINE
400*400VESA Curved TV
The curved deepth is aroud 10~15mm from VESA horizontal line.
NOTE:To install curved TV,please use "M8*30 screw+big spacer(15mm) or big&small(20mm) Spacer together” NOTE:To install curved TV,please use "M8*50 screw+big&big spacer(30mm) or big&big&small spacer(35mm) or big&big&small&small(40mm) Spacer together”
M8x30MM Screw+ M8x15MM Spacer or M8x20MM Spacer M8x50MM Screw+ M8x30MM Spacer or M8x35MM Spacer or M8x40MM Spacer or M-D
M-I
M-G
or M-H
M-I
or
M-D
M-G
M-E
M-I
M-G
M-I
M-E
M-G
M-H
M-I
Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions.
7
CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
or M-H
M-E
M-G
100x 1 00/200x 1 00 200x200/300x300 400x200/400x400
55" MAX
30kg (66lbs) RATED
ISSUED: APR. 2014
NOTE: Read the entire instruction manual before you start installation and assembly.
Component Checklist IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement.
WARNING • Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
VESA adapter (x 2 ) B
• This mounting bracket was designed to be installed and utilised ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
M8x15 (x4) C
wall mount A
• This product should only be installed by someone with good mechanical ability who has basic building experience and fully understands this manual. • Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
M8 nut (x4) D
Allen key (x1) E
wrench (x1) F
Package M
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended. • Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
M5x14 (x4) M-A
M6x14 (x4) M-B
M8x30 (x4) M-D
M6x30 (x4) M-C
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage to the items, This greatly reduces their holding power. • This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
M8x50 (x4) M-E
D5 washer (x4) M-F
D8 washer (x4) M-G
small spacer (x8) M-H
big spacer (x8) M-I
Package W
ST6.3x55 (x6) W-A
1
concrete anchor (x6) W-B
D6 washer (x6) W-C
2
1. Separating the Plastic Covers and the VESA Plate
2b. For Solid Brick and Concrete Mounting 60mm (2.4") ø 10mm (ø 3/8")
2
1
Mark the exact location of mounting holes
Drill pilot holes
2a. For Wood Stud Wall Mounting 55mm (2.2")
√ W-B
ø 4.5mm (ø 3/16")
1
W-C
X
X
W-A
3
2
Find and mark the exact location of mounting holes
Screw the wall mount onto the wall
Drill pilot holes
With the arrow pointing upward
√
X
X WARNING Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
W-C W-A
X
Screw the wall mount onto the wall
3. Installing the Plastic Covers
4. Assembling the VESA Plate
With the arrow pointing upward D
WARNING • Make sure that mounting screws are anchored into the center of the studs. The use of a stud finder is highly recommended.
C
• Installers are responsible to provide hardware for other types of mounting situations. • Installers must verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
3
4
5. Installing the VESA Plate M-C M-D
M-E
M-H Top of the display
M-I
M-I
M-G For Max VESA 200x200
For Max VESA 400x400
M-G
or
M-E
M-E 5-1 For Flat Back Screens M-H
TV
M-H
TV
TV
M-I
M-I
M-G
M-F M-G
M-F M-G M-A M-B
or
M-G
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen. · Screw the VESA plate onto the display. Tighten all screws but do not over tighten.
6. Hanging the Display onto the Wall Mount M-A M-B
5-2 For Recessed Back Screens or to Access A/V Inputs
TV
TV
F
TV
M-C M-D
M-C M-D
M-H
or M-I
M-G
5
M-G
• Level the display . • Place the lower nut, tighten both nuts.
6
