FUTURA
F3 RE30 CC
APPLICATIONS
RETRACTABLE TAIL-LIFT FOR HEAVY DUTY LOADS load capacity:
2500 kg at 1000 mm 3000 kg at 600 mm
FUTURA
STANDARD EQUIPMENT PLATFORM
- Platform in aluminium alloy. - Teflon wheels to prevent platform wear.
MECHANICAL FUNCTIONS
- Steel guides with high yield limit, treated and chrome plated with adjustment ability. - Tail-lift deployment and stowage under chassis by means of double extension cylinder. - Automatic hydraulic tilting of platform to ground. - Mechanical stop of tail-lift arms against equipment (adjustable in 3 positions). - Pre-assembled control box support for quick installation. - Type approved tail lift platform forms the rear bumper. Power pack equipped with: - Closing seal, compact and soundproof. - Electrical connections by means of modular extractable board. - Electrical board for any type of connection through keyed connectors. - 2 single-acting lifting cylinders with lubrication. - 2 single-acting tilt cylinders with lubrication. - Memory cylinder for repeat automatic tilting at ground level. - 1 double ram for tail-lift deployment and stowage under chassis. - Cylinders protected by rubber gaitors. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield - Flow adjusters compensated on all downward movements.
B’ B'
W
B
E T
E T
CONTROLS
B’ B' B
E
T
T
Arm
Arm Length
H HS
Arm Width (centre to centre) W 75*
W 82*
W 125
742
756
820
1250
895
756
820
1250
*on demand
Mod.
Load capacity (centre of gravity at 600 mm)
F3 RE 30 H 3000 Kg
F3 RE 30 HS
RETRACTABLE LIFTS
HYDRAULIC CHARACTERISTICS
TECHNICAL DATA
E
The retractable tail lift F3 RE30 CC is the ideal tail lift for loading and unloading heavy or specialist loads where there is also a need for dock loading of the vehicle. This is made possible by the retractable lift stowing under the vehicle floor when not in use. The F3 RE30 is available for trucks and semi-trailers.
Std. Platform Dimensions Depth 1630 (530+1100) 1730 (530+1200)
Width
- External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 350 A silver pin (peak current) - Proximity switches for automatic positioning of tail-lift.
CHOICE OF MOUNTING - Bolted assembly brackets. E
B
B’
max
min
min
850
1390
1635
1730
340
870
1620
1845
1940
340
Weight* Kg
T
2450
*Approximate weight for tail-lift with platform dimensions 1630 mm x 2450 mm. Platforms depth from 1333 mm to 1983 mm. All dimensions are in mm unless otherwise specified. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
PRODUCT FINISHING
- All steel parts of the hydraulic kit have been previously sandblasted, then treated with hexacrylic electrocataphoresis (except for cylinders, painted with bicomponent polyurethane enamel). - Material conform to EC standards. - Steel cataphoresis-treated pins. - Anti-friction self-lubricating bushings with lubricator. - Delivered in assembled kit and tested, mounted to the chassis by bolting, eliminating the need to re-painting the vehicle.
31
APPLICATIONS
RETRACTABLE TAIL-LIFT FOR HEAVY DUTY LOADS load capacity:
2500 kg at 1000 mm 3000 kg at 600 mm
FUTURA
STANDARD EQUIPMENT PLATFORM
- Platform in aluminium alloy. - Teflon wheels to prevent platform wear.
MECHANICAL FUNCTIONS
- Steel guides with high yield limit, treated and chrome plated with adjustment ability. - Tail-lift deployment and stowage under chassis by means of double extension cylinder. - Automatic hydraulic tilting of platform to ground. - Mechanical stop of tail-lift arms against equipment (adjustable in 3 positions). - Pre-assembled control box support for quick installation. - Type approved tail lift platform forms the rear bumper. Power pack equipped with: - Closing seal, compact and soundproof. - Electrical connections by means of modular extractable board. - Electrical board for any type of connection through keyed connectors. - 2 single-acting lifting cylinders with lubrication. - 2 single-acting tilt cylinders with lubrication. - Memory cylinder for repeat automatic tilting at ground level. - 1 double ram for tail-lift deployment and stowage under chassis. - Cylinders protected by rubber gaitors. - Built-in safety solenoid valves on every cylinder. - Tank with air filter. - Chrome-plated steel cylinder rods with high yield - Flow adjusters compensated on all downward movements.
B’ B'
W
B
E T
E T
CONTROLS
B’ B' B
E
T
T
Arm
Arm Length
H HS
Arm Width (centre to centre) W 75*
W 82*
W 125
742
756
820
1250
895
756
820
1250
*on demand
Mod.
Load capacity (centre of gravity at 600 mm)
F3 RE 30 H 3000 Kg
F3 RE 30 HS
RETRACTABLE LIFTS
HYDRAULIC CHARACTERISTICS
TECHNICAL DATA
E
The retractable tail lift F3 RE30 CC is the ideal tail lift for loading and unloading heavy or specialist loads where there is also a need for dock loading of the vehicle. This is made possible by the retractable lift stowing under the vehicle floor when not in use. The F3 RE30 is available for trucks and semi-trailers.
Std. Platform Dimensions Depth 1630 (530+1100) 1730 (530+1200)
Width
- External control box. - Illuminated control panel. - Control with no electronic components. - Cut off switch with key. - Two-hand use for operator’s safety. - Motor with thermal safety device. - Motor relay with 350 A silver pin (peak current) - Proximity switches for automatic positioning of tail-lift.
CHOICE OF MOUNTING - Bolted assembly brackets. E
B
B’
max
min
min
850
1390
1635
1730
340
870
1620
1845
1940
340
Weight* Kg
T
2450
*Approximate weight for tail-lift with platform dimensions 1630 mm x 2450 mm. Platforms depth from 1333 mm to 1983 mm. All dimensions are in mm unless otherwise specified. Anteo reserves the right to change weights and technical specifications without prior notice. No indemnity for damages can be claimed from Anteo for changes in technical specifications and/or in weight.
PRODUCT FINISHING
- All steel parts of the hydraulic kit have been previously sandblasted, then treated with hexacrylic electrocataphoresis (except for cylinders, painted with bicomponent polyurethane enamel). - Material conform to EC standards. - Steel cataphoresis-treated pins. - Anti-friction self-lubricating bushings with lubricator. - Delivered in assembled kit and tested, mounted to the chassis by bolting, eliminating the need to re-painting the vehicle.
31
