G3-S13 Converging Chest Press UNPACKING G3-S13
System dealers will provide service and maintenance training at our corporate facility upon request.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
liability to a minimum. Equipment needs to be inspected at regular intervals.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
licensed contractor must be performed this, where application.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A
readable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un-
country’s local MATRIX Fitness Systems dealer.
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your
CHECK FOR DAMAGE PARTS
2. Keep hands and feet clear at all times from moving parts to avoid injury.
equipment is used properly to avoid injury.
recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems
1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole
PROPER USAGE
It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
IMPORTANT SAFETY INFORMATION
Matrix Fitness Systems Corp. 1610 Landmark Drive Cottage Grove WI 53527
Toll Free 866.693.4863 www.matrixfitness.com Fax 608.839.8687
G3-S13 Converging Chest Press
PART # MH0204528B Step 1
Step 5
Frame Detail
Item Description
Z16
Z16
Belt Routing Detail
Sketch Qty 24
Z16
Screw (M10x25mm Long)
Z07
Flat Washer (M10)
16
Z08
Lock Washer (M10)
16
Z23
Arc-Flat Waser
8
Z19
Screw
Z23
Screw
Arc-Flat Washer Flange Bushing
Lock Washer Flat Washer
Z08 Z07
Fixing Block
Fixing Block Z07 Z25
Z25 Z07
Flat Washer Lock Washer
Screw
G3-S13 Converging Chest Press
Small Cam
UNPACKING G3-S13 Converging Chest Press Thank you for purchasing a MATRIX Fitness product. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Z07 Z25 Big Cam F19
Item
G3-S13 Converging Chest Press
Z25 Z07
Cam Flange x2
Z25 Z07 Z09 Z06 Z05 Z19 F19 F18
Description
Sketch
Screw (M6x36mm Long) Washer (M10) Screw (M12x25mm Long) Lock Washer (M12) Flat Washer (M12) Vavy Washer Cable (6x2676mm Long) Cable (6x2418mm Long)
Qty 10 20 1 1 1 1 1 1
D18 Z05 Z06 Z09
CAUTION The weight of the G3-S13 Converging Chest Press 364lbs. (165kg) not including the weight stack. To avoid injury to
Step 2
Step 6
yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces
Input Detail
Item D18 Z13 Z14 Z17 Z19
Description Flange Bushing Flat Washer (M12) Lock Washer (M12) Screw (M12x25mm Long) Vavy Washer
Sketch Qty 2 2 2 2 2
Input Detail
from this box.
D18
Z13 Z14
Z17
Z17
F18 F19 F22 Z10 Z11 Z03 Z28 Z29 Z31
TOOLS NEEDED DESCRIPTION
Z19
Item Description
SKETCH
QUANTITY
3MM L-Shaped Allen Wrench
1
4MM L-Shaped Allen Wrench
1
5MM L-Shaped Allen Wrench
1
6MM L-Shaped Allen Wrench
1
8MM L-Shaped Allen Wrench
1
10MM L-Shaped Allen Wrench
1
Phillips Screwdriver
1
8MM Open-End Wrench
1
17MM Open-End Wrench
1
Guide Rod Lubrication
1
Z10
F19
F18
F22
Pulley Guide Rod
Z31
Pulley Z31
Z10
D18
Z29 Z28
If any items are missing please contact your country's local Matrix dealer for assistance.
Z11
Z11
Z19
Pulley Cover
Z10
Step 3
Step 7
Step 4 Item Description Z15 J33 J32 J31
Sketch Qty
Screw (M10x25mm Long) Back Pad Hand Pad Seat Pad
Accessory Detail
Weight Stack Detail
Item Description
11 1 1 1 Z03
Z15 J32
Z03 K12
Z05
Z27
Z26 Z12
Sketch
Z21 Screw (M8x20) Z22 Flat Washer (M8) Z04 Lock Washer (M8) Z12 Flat Washer (M5) Z26 Lock Washer (M5) Z27 Screw (M4x10mm Long) Z03 E-Clipper Z05 Screw (M4x10mm Long) K07 Rubber Stack Cushions K12 Stop Ring
2 2 2 4 4 2 4 4 2 2
Z20
UPPER COVER
TOP PLATE DETAIL
Z20 Z02
Guide Rod
TOWEL / WATER BOTTLE HOLDER Z24
Screw
J33
Z01
Z09
UPPER COVER
Knurled Belt Securing Insert
Z01 Screw (M8x30mm Long) Z02 Screw (M4x21mm Long) Z20 Internal Tooth Lock Washer (M4) Z09 Screw (M8x18mm Long) Z24 Rubber Shield Spacer Q07 Rubber Tip Weight Shield Bolt(M8x40L)
Z02
Guide Sleeve
Z22 Z04 Z21
Item Description
Qty
B41
Q07 Top Weight Selector Pin
J31
K07
WEIGHT SHIELD Z15
1 1 1 3 3 2 2 2 2
Z11
Z03
Z13
Upholstry Detail
Cable (6x2418mm Long) Cable (6x2676mm Long) Cable (6x2900mm Long) Rod End Bearing Cap Nut E-Clipper Screw (M10x40mm Long) Flat Washer (M10) Screw (M10x30mm Long)
Z03
Hardware Bag
Z14
Qty
Sketch
PLACARD HOLDER
Sketch Qty 2 6 6 2 6 6
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
liability to a minimum. Equipment needs to be inspected at regular intervals.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
licensed contractor must be performed this, where application.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A
readable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un-
country’s local MATRIX Fitness Systems dealer.
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your
CHECK FOR DAMAGE PARTS
2. Keep hands and feet clear at all times from moving parts to avoid injury.
equipment is used properly to avoid injury.
recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems
1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole
PROPER USAGE
It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
IMPORTANT SAFETY INFORMATION
Matrix Fitness Systems Corp. 1610 Landmark Drive Cottage Grove WI 53527
Toll Free 866.693.4863 www.matrixfitness.com Fax 608.839.8687
G3-S13 Converging Chest Press
PART # MH0204528B Step 1
Step 5
Frame Detail
Item Description
Z16
Z16
Belt Routing Detail
Sketch Qty 24
Z16
Screw (M10x25mm Long)
Z07
Flat Washer (M10)
16
Z08
Lock Washer (M10)
16
Z23
Arc-Flat Waser
8
Z19
Screw
Z23
Screw
Arc-Flat Washer Flange Bushing
Lock Washer Flat Washer
Z08 Z07
Fixing Block
Fixing Block Z07 Z25
Z25 Z07
Flat Washer Lock Washer
Screw
G3-S13 Converging Chest Press
Small Cam
UNPACKING G3-S13 Converging Chest Press Thank you for purchasing a MATRIX Fitness product. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
Z07 Z25 Big Cam F19
Item
G3-S13 Converging Chest Press
Z25 Z07
Cam Flange x2
Z25 Z07 Z09 Z06 Z05 Z19 F19 F18
Description
Sketch
Screw (M6x36mm Long) Washer (M10) Screw (M12x25mm Long) Lock Washer (M12) Flat Washer (M12) Vavy Washer Cable (6x2676mm Long) Cable (6x2418mm Long)
Qty 10 20 1 1 1 1 1 1
D18 Z05 Z06 Z09
CAUTION The weight of the G3-S13 Converging Chest Press 364lbs. (165kg) not including the weight stack. To avoid injury to
Step 2
Step 6
yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces
Input Detail
Item D18 Z13 Z14 Z17 Z19
Description Flange Bushing Flat Washer (M12) Lock Washer (M12) Screw (M12x25mm Long) Vavy Washer
Sketch Qty 2 2 2 2 2
Input Detail
from this box.
D18
Z13 Z14
Z17
Z17
F18 F19 F22 Z10 Z11 Z03 Z28 Z29 Z31
TOOLS NEEDED DESCRIPTION
Z19
Item Description
SKETCH
QUANTITY
3MM L-Shaped Allen Wrench
1
4MM L-Shaped Allen Wrench
1
5MM L-Shaped Allen Wrench
1
6MM L-Shaped Allen Wrench
1
8MM L-Shaped Allen Wrench
1
10MM L-Shaped Allen Wrench
1
Phillips Screwdriver
1
8MM Open-End Wrench
1
17MM Open-End Wrench
1
Guide Rod Lubrication
1
Z10
F19
F18
F22
Pulley Guide Rod
Z31
Pulley Z31
Z10
D18
Z29 Z28
If any items are missing please contact your country's local Matrix dealer for assistance.
Z11
Z11
Z19
Pulley Cover
Z10
Step 3
Step 7
Step 4 Item Description Z15 J33 J32 J31
Sketch Qty
Screw (M10x25mm Long) Back Pad Hand Pad Seat Pad
Accessory Detail
Weight Stack Detail
Item Description
11 1 1 1 Z03
Z15 J32
Z03 K12
Z05
Z27
Z26 Z12
Sketch
Z21 Screw (M8x20) Z22 Flat Washer (M8) Z04 Lock Washer (M8) Z12 Flat Washer (M5) Z26 Lock Washer (M5) Z27 Screw (M4x10mm Long) Z03 E-Clipper Z05 Screw (M4x10mm Long) K07 Rubber Stack Cushions K12 Stop Ring
2 2 2 4 4 2 4 4 2 2
Z20
UPPER COVER
TOP PLATE DETAIL
Z20 Z02
Guide Rod
TOWEL / WATER BOTTLE HOLDER Z24
Screw
J33
Z01
Z09
UPPER COVER
Knurled Belt Securing Insert
Z01 Screw (M8x30mm Long) Z02 Screw (M4x21mm Long) Z20 Internal Tooth Lock Washer (M4) Z09 Screw (M8x18mm Long) Z24 Rubber Shield Spacer Q07 Rubber Tip Weight Shield Bolt(M8x40L)
Z02
Guide Sleeve
Z22 Z04 Z21
Item Description
Qty
B41
Q07 Top Weight Selector Pin
J31
K07
WEIGHT SHIELD Z15
1 1 1 3 3 2 2 2 2
Z11
Z03
Z13
Upholstry Detail
Cable (6x2418mm Long) Cable (6x2676mm Long) Cable (6x2900mm Long) Rod End Bearing Cap Nut E-Clipper Screw (M10x40mm Long) Flat Washer (M10) Screw (M10x30mm Long)
Z03
Hardware Bag
Z14
Qty
Sketch
PLACARD HOLDER
Sketch Qty 2 6 6 2 6 6
