g3s73 prone leg curl g3s73 prone leg curl - GymStore.com
System dealers will provide service and maintenance training at our corporate facility upon request.
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
liability to a minimum. Equipment needs to be inspected at regular intervals.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
licensed contractor must be performed this, where application.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A
readable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un-
country’s local MATRIX Fitness Systems dealer.
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your
CHECK FOR DAMAGE PARTS
2. Keep hands and feet clear at all times from moving parts to avoid injury.
recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems
equipment is used properly to avoid injury.
1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole
PROPER USAGE
It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
IMPORTANT SAFETY INFORMATION
Matrix Fitness Systems Corp. 1610 Landmark Drive Cottage Grove WI 53527
Toll Free 866.693.4863 www.matrixfitness.com Fax 608.839.8687
G3S73 PRONE LEG CURL
PART # MH0204521B
Step 5
Step 1 Item J18 C24 C26 C25
Description Sketch Qty Flat Washer (M10) 12 Lock Washer (M10) 12 Arc-flat Washer 6 Allen Head Cap Screw (M10x25L) 18
Allen Head Cap Screw (C25)
Belt Routing Detail
Item Description
Arc Flat Washer (C26)
G3S73 PRONE LEG CURL
Sketch
F13 Allen Head Cap Screw
4
F15 Lock Washer (M5)
4
F14 Flat Washer (M5)
4
F08 Attachment Plate F07 Belt F60 Nylon Nut (M5)
2 1 4
Belt
Nylon Nut
Lock Washer (C24)
Belt Fixer Flat Washer
F60
G3S73 - PRONE LEG CURL
Flat Washer (C32)
Lock Washer
Thank you for purchasing a MATRIX Fitness product. Carefully unpack the unit from this box and dispose of the packing
C25
materials in accordance with your local laws.
C26
C24 J18
Screw
F08 F14 F15 F13
UNPACKING G3S73 PRONE LEG CURL C25
Qty
CAUTION The weight of the G3S73 Prone Leg Curl is 600 lbs. (272 kg) not including the weight stack. To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Step 2
Step 6 TOOLS NEEDED
Input Detail
B52 B54 C22 D17 D28 D45 D46 D47 Q07 D21
B54 D46
D45 D47
DESCRIPTION
Sketch Qty 2 Bushing Set 2 Wavy Washer 2 Screw, Oval-Hex Socket (M10) 1 Shaft 1 Screw Cover 3 Allen Head Cap Screw (M12) 3 Lock Washer (M12) 3 Flat Washer (M12) 1 Pivot Point Index 1 Shaft
Item Description
B54
D21
D28 B52
QUANTITY
3MM L-Shaped Allen Wrench
1
4MM L-Shaped Allen Wrench
1
5MM L-Shaped Allen Wrench
1
6MM L-Shaped Allen Wrench
1
8MM L-Shaped Allen Wrench
1
10MM L-Shaped Allen Wrench
1
Phillips Screwdriver
1
8MM Open-End Wrench
1
17MM Open-End Wrench
1
Guide Rod Lubrication
1
Q07 D47 D46
D17
Q38
B51 x6 B43 x6
Item Z10 B49 B43 B51 Q05 Q06 Q37 Q38
Step 4 Sketch Qty 16 C22 Screw,Oval-Hex Socket
Item Description
Weight Stack Detail
(M10x25L)
K13 L14 F15 F14 B49
K05
Sketch
Qty
Item
Description
B49 F14 K05
Allen Head Cap Screw (M8 X 30L) Flat Washer
2 4
Knurled Belt Securing Insert
1
K07
Rubber Stack Cushions
2
K13
4
K18
E-Clipper (E-15) Flat Washer (M8)
K17 C54
Screw, Oval-Hex Socket (M8 X 20L) Lock Washer (M8)
2 2
F15 L14
Lock Washer (M5) Screw, Oval-Hex Socket (M5 X 16L)
4 4
2
Guide Sleeve
K18 C54 K17
10
Knurled Belt Securing Insert (K05)
Guide Rod Allen Head Cap Screw (M8x30L)
25 40 55 70 85
Top Weight
100 115 130
10
145
Selector Pin
160 175 190 205 220 235 250
C22
265 280 295
K07
Z10
Description Panel
Weight Shield
Q06 x6
C22
Upholstry Detail
Q37
B49
Upper Cover x2
If any items are missing please contact your country's local Matrix dealer for assistance.
Step 3
Towel/Water Bottle Holder
Accessory Detail
Hardware Bag
B52
D45
SKETCH
Description
Q05 x6
Sketch Qty
Small Cap Screw (M8x18L) Allen Head Cap Screw (M8x30L) Screw (W4x12L) Internal Tooth Lock W asher (M4) Rubber Shield Spacer Rubber T ip Weight Shield Bolt Rubber Shield Spacer Rubber T ip Weight Shield Bolt
2 2 6 6 6 6 4 4
Weight Shield
5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness
liability to a minimum. Equipment needs to be inspected at regular intervals.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your
licensed contractor must be performed this, where application.
3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking of tipping over. A
readable or missing, contact your MATRIX Fitness Systems dealer for a replacement.
2. MANINTAIN LABELS AND NAMEPLATES: DO NOT remove labels for any reason. They contain important information. If un-
country’s local MATRIX Fitness Systems dealer.
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your
CHECK FOR DAMAGE PARTS
2. Keep hands and feet clear at all times from moving parts to avoid injury.
recommended that all users of MATRIX Fitness Systems exercise equipment be informed MATRIX Fitness Systems
equipment is used properly to avoid injury.
1. Do not use any equipment in any way other than designed of intended by the manufacturer. It is imperative the sole
PROPER USAGE
It is the sole recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment.
IMPORTANT SAFETY INFORMATION
Matrix Fitness Systems Corp. 1610 Landmark Drive Cottage Grove WI 53527
Toll Free 866.693.4863 www.matrixfitness.com Fax 608.839.8687
G3S73 PRONE LEG CURL
PART # MH0204521B
Step 5
Step 1 Item J18 C24 C26 C25
Description Sketch Qty Flat Washer (M10) 12 Lock Washer (M10) 12 Arc-flat Washer 6 Allen Head Cap Screw (M10x25L) 18
Allen Head Cap Screw (C25)
Belt Routing Detail
Item Description
Arc Flat Washer (C26)
G3S73 PRONE LEG CURL
Sketch
F13 Allen Head Cap Screw
4
F15 Lock Washer (M5)
4
F14 Flat Washer (M5)
4
F08 Attachment Plate F07 Belt F60 Nylon Nut (M5)
2 1 4
Belt
Nylon Nut
Lock Washer (C24)
Belt Fixer Flat Washer
F60
G3S73 - PRONE LEG CURL
Flat Washer (C32)
Lock Washer
Thank you for purchasing a MATRIX Fitness product. Carefully unpack the unit from this box and dispose of the packing
C25
materials in accordance with your local laws.
C26
C24 J18
Screw
F08 F14 F15 F13
UNPACKING G3S73 PRONE LEG CURL C25
Qty
CAUTION The weight of the G3S73 Prone Leg Curl is 600 lbs. (272 kg) not including the weight stack. To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Step 2
Step 6 TOOLS NEEDED
Input Detail
B52 B54 C22 D17 D28 D45 D46 D47 Q07 D21
B54 D46
D45 D47
DESCRIPTION
Sketch Qty 2 Bushing Set 2 Wavy Washer 2 Screw, Oval-Hex Socket (M10) 1 Shaft 1 Screw Cover 3 Allen Head Cap Screw (M12) 3 Lock Washer (M12) 3 Flat Washer (M12) 1 Pivot Point Index 1 Shaft
Item Description
B54
D21
D28 B52
QUANTITY
3MM L-Shaped Allen Wrench
1
4MM L-Shaped Allen Wrench
1
5MM L-Shaped Allen Wrench
1
6MM L-Shaped Allen Wrench
1
8MM L-Shaped Allen Wrench
1
10MM L-Shaped Allen Wrench
1
Phillips Screwdriver
1
8MM Open-End Wrench
1
17MM Open-End Wrench
1
Guide Rod Lubrication
1
Q07 D47 D46
D17
Q38
B51 x6 B43 x6
Item Z10 B49 B43 B51 Q05 Q06 Q37 Q38
Step 4 Sketch Qty 16 C22 Screw,Oval-Hex Socket
Item Description
Weight Stack Detail
(M10x25L)
K13 L14 F15 F14 B49
K05
Sketch
Qty
Item
Description
B49 F14 K05
Allen Head Cap Screw (M8 X 30L) Flat Washer
2 4
Knurled Belt Securing Insert
1
K07
Rubber Stack Cushions
2
K13
4
K18
E-Clipper (E-15) Flat Washer (M8)
K17 C54
Screw, Oval-Hex Socket (M8 X 20L) Lock Washer (M8)
2 2
F15 L14
Lock Washer (M5) Screw, Oval-Hex Socket (M5 X 16L)
4 4
2
Guide Sleeve
K18 C54 K17
10
Knurled Belt Securing Insert (K05)
Guide Rod Allen Head Cap Screw (M8x30L)
25 40 55 70 85
Top Weight
100 115 130
10
145
Selector Pin
160 175 190 205 220 235 250
C22
265 280 295
K07
Z10
Description Panel
Weight Shield
Q06 x6
C22
Upholstry Detail
Q37
B49
Upper Cover x2
If any items are missing please contact your country's local Matrix dealer for assistance.
Step 3
Towel/Water Bottle Holder
Accessory Detail
Hardware Bag
B52
D45
SKETCH
Description
Q05 x6
Sketch Qty
Small Cap Screw (M8x18L) Allen Head Cap Screw (M8x30L) Screw (W4x12L) Internal Tooth Lock W asher (M4) Rubber Shield Spacer Rubber T ip Weight Shield Bolt Rubber Shield Spacer Rubber T ip Weight Shield Bolt
2 2 6 6 6 6 4 4
Weight Shield
