garden luminaire series
Low Frequency Induction Lamp
BMX998
GARDEN LUMINAIRE SERIES
Lamp Fixture ◆ Die-cast aluminum alloy housing with PET outside with silver powder coating finish for corrosion-resistance. ◆ High pure anodized aluminum reflector with high temperature vacuum plating results in more reflection efficiency. ◆ High transmission rate clear tempered glass cover promises the light distribution and increases the mechanical strength. ◆ Gas-tight silicon rubber seal promises a good dust-proof and water-proof performance.
Lamp and Ballst ◆ BRIGHTMAX 30W, 40W, 60W, 80W, 120W, 150W ring series low frequency induction lamp tubular with 5 years warranty. ◆ BRIGHTMAX high power factor (>0.95) electronic ballast with 3 years warranty.
Application ◆ Gardens, parks, shopping malls, outlets, plazas. ◆ Ambient temperature: -20~40oC.
Specification for ordering
Model No.
Available options for BMX998 are shown in the table. Please choose the lamp power, color temperature and voltage when ordering. Special options available upon request.
BMX998
Lamp Power Color Temperature Voltage HX30W [ ]
2700K [ ] 3000K [ ]
HX40W [ ]
3500K [ ] 4200K [ ]
DC12V [ ] DC24V [ ]
HX60W [ ]
5000K [ ] 6400K [ ]
AC120V [ ]
HX80W [ ]
AC220V [ ]
HX120W [ ]
AC277V [ ]
HX150W [ ] ZNSHINE PV-LIGHTING CO., LTD.
#1 Zhixi Industry Zone,Jintan,Jiangsu,China Tel:+86-519-82445919 Fax:+86-519-82442068
Luminaire Data Sheet
Induction Lamp Characteristics Model No.
Lumen
Eff
Visible Eff
Dimension
CRI
(lm)
(lm/W)
(plm/W)
(mm)
(Ra)
ZX-HX-40W
2560~2800
64~70
98~115
D.173*H.64
80
ZX-HX-80W
5600~6000
70~75
112~120
D.244*H.76
80
ZX-HX-120W
9000~9840
75~82
120~131
D.305*H.76
80
ZX-HX-150W
11250~12300
75~82
120~131
D.305*H.76
80
Voltage Range (V)
Current (A)
Frequency (KHz)
Dimension (mm)
Power Factor
ZN-PL-40WDC12
9.5~16
3.70
230
L.118*W.101*H.55
0.90
ZN-PL-40WDC24
18~29
1.85
230
L.118*W.101*H.55
0.90
Electronic Ballast Characteristics Model No.
ZNSHINE PV-LIGHTING CO., LTD.
ZN-PL-40W-120
90~150
0.34
230
L.118*W.101*H.55
0.98
ZN-PL-40W-220
175~265
0.19
230
L.118*W.101*H.55
0.98
ZN-PL-40W-277
250~305
0.16
230
L.118*W.101*H.55
0.90
ZN-PL-80W-24
18~29
3.7
230
L.189*W.101*H.55
0.90
ZN-PL-80W-120
90~150
0.67
230
L.189*W.101*H.55
0.98
ZN-PL-80W-220
175~265
0.38
230
L.189*W.101*H.55
0.98
ZN-PL-80W-277
250~305
0.32
230
L.189*W.101*H.55
0.9
ZN-PL-120W-120
90~150
1.08
230
L.189*W.101*H.55
0.98
ZN-PL-120W-220
175~265
0.69
230
L.189*W.101*H.55
0.98
ZN-PL-120W-277
250~305
0.48
230
L.189*W.101*H.55
0.90
ZN-PL-150W-120
90~150
1.35
230
L.189*W.101*H.55
0.98
ZN-PL-150W-220
175~265
0.86
230
L.189*W.101*H.55
0.98
ZN-PL-150W-277
250~305
0.56
230
L.189*W.101*H.55
0.90
#1 Zhixi Industry Zone,Jintan,Jiangsu,China Tel:+86-519-82445919 Fax:+86-519-82442068
Wire Connection Instruction 1. Please ensure the power off before wire connection. 2. Please read the working parameters marked on the label of ballast before wire connection. 3. Please follow the instruction shown in below circuit diagram strictly while connecting the wires.
PE: ground wire NB: input wire NC: output wire NF: electromagnetic induction wire
Wire Connection Instruction NC shall be connected with NF at random NB shall be connected with power line PE shall be connected with ground Circuit Diagram of Oval Series Induction Lamps
Lamp Housing Installation and Maintenance Instruction 1. Please cut off power before installation and maintenance to avoid electric shock and heat injury. 2. The lamp housing shall avoid strong vibration or impact. 3. There should be no corrosive or inflammable and explosive materials around the location of installed lamp housing. 4. To keep the high reflection efficiency of reflector and high transmission rate of glass cover, it is advised to do some cleaning termly according to local conditions. The soft soap or detergent should be nearly neutral (PH value 6~8), not abrasive and no chlorid or aromatics. They should be cleaned with soft cloth or brush, washed with cold water and then dried. Please pay attention that the IP grade would not be affected during the maintenance procedure. 5. Please consult the following installation instruction pictures while installing and maintaining to avoid electric shock and fire accident.
ZNSHINE PV-LIGHTING CO., LTD.
#1 Zhixi Industry Zone,Jintan,Jiangsu,China Tel:+86-519-82445919 Fax:+86-519-82442068
BMX998
GARDEN LUMINAIRE SERIES
Lamp Fixture ◆ Die-cast aluminum alloy housing with PET outside with silver powder coating finish for corrosion-resistance. ◆ High pure anodized aluminum reflector with high temperature vacuum plating results in more reflection efficiency. ◆ High transmission rate clear tempered glass cover promises the light distribution and increases the mechanical strength. ◆ Gas-tight silicon rubber seal promises a good dust-proof and water-proof performance.
Lamp and Ballst ◆ BRIGHTMAX 30W, 40W, 60W, 80W, 120W, 150W ring series low frequency induction lamp tubular with 5 years warranty. ◆ BRIGHTMAX high power factor (>0.95) electronic ballast with 3 years warranty.
Application ◆ Gardens, parks, shopping malls, outlets, plazas. ◆ Ambient temperature: -20~40oC.
Specification for ordering
Model No.
Available options for BMX998 are shown in the table. Please choose the lamp power, color temperature and voltage when ordering. Special options available upon request.
BMX998
Lamp Power Color Temperature Voltage HX30W [ ]
2700K [ ] 3000K [ ]
HX40W [ ]
3500K [ ] 4200K [ ]
DC12V [ ] DC24V [ ]
HX60W [ ]
5000K [ ] 6400K [ ]
AC120V [ ]
HX80W [ ]
AC220V [ ]
HX120W [ ]
AC277V [ ]
HX150W [ ] ZNSHINE PV-LIGHTING CO., LTD.
#1 Zhixi Industry Zone,Jintan,Jiangsu,China Tel:+86-519-82445919 Fax:+86-519-82442068
Luminaire Data Sheet
Induction Lamp Characteristics Model No.
Lumen
Eff
Visible Eff
Dimension
CRI
(lm)
(lm/W)
(plm/W)
(mm)
(Ra)
ZX-HX-40W
2560~2800
64~70
98~115
D.173*H.64
80
ZX-HX-80W
5600~6000
70~75
112~120
D.244*H.76
80
ZX-HX-120W
9000~9840
75~82
120~131
D.305*H.76
80
ZX-HX-150W
11250~12300
75~82
120~131
D.305*H.76
80
Voltage Range (V)
Current (A)
Frequency (KHz)
Dimension (mm)
Power Factor
ZN-PL-40WDC12
9.5~16
3.70
230
L.118*W.101*H.55
0.90
ZN-PL-40WDC24
18~29
1.85
230
L.118*W.101*H.55
0.90
Electronic Ballast Characteristics Model No.
ZNSHINE PV-LIGHTING CO., LTD.
ZN-PL-40W-120
90~150
0.34
230
L.118*W.101*H.55
0.98
ZN-PL-40W-220
175~265
0.19
230
L.118*W.101*H.55
0.98
ZN-PL-40W-277
250~305
0.16
230
L.118*W.101*H.55
0.90
ZN-PL-80W-24
18~29
3.7
230
L.189*W.101*H.55
0.90
ZN-PL-80W-120
90~150
0.67
230
L.189*W.101*H.55
0.98
ZN-PL-80W-220
175~265
0.38
230
L.189*W.101*H.55
0.98
ZN-PL-80W-277
250~305
0.32
230
L.189*W.101*H.55
0.9
ZN-PL-120W-120
90~150
1.08
230
L.189*W.101*H.55
0.98
ZN-PL-120W-220
175~265
0.69
230
L.189*W.101*H.55
0.98
ZN-PL-120W-277
250~305
0.48
230
L.189*W.101*H.55
0.90
ZN-PL-150W-120
90~150
1.35
230
L.189*W.101*H.55
0.98
ZN-PL-150W-220
175~265
0.86
230
L.189*W.101*H.55
0.98
ZN-PL-150W-277
250~305
0.56
230
L.189*W.101*H.55
0.90
#1 Zhixi Industry Zone,Jintan,Jiangsu,China Tel:+86-519-82445919 Fax:+86-519-82442068
Wire Connection Instruction 1. Please ensure the power off before wire connection. 2. Please read the working parameters marked on the label of ballast before wire connection. 3. Please follow the instruction shown in below circuit diagram strictly while connecting the wires.
PE: ground wire NB: input wire NC: output wire NF: electromagnetic induction wire
Wire Connection Instruction NC shall be connected with NF at random NB shall be connected with power line PE shall be connected with ground Circuit Diagram of Oval Series Induction Lamps
Lamp Housing Installation and Maintenance Instruction 1. Please cut off power before installation and maintenance to avoid electric shock and heat injury. 2. The lamp housing shall avoid strong vibration or impact. 3. There should be no corrosive or inflammable and explosive materials around the location of installed lamp housing. 4. To keep the high reflection efficiency of reflector and high transmission rate of glass cover, it is advised to do some cleaning termly according to local conditions. The soft soap or detergent should be nearly neutral (PH value 6~8), not abrasive and no chlorid or aromatics. They should be cleaned with soft cloth or brush, washed with cold water and then dried. Please pay attention that the IP grade would not be affected during the maintenance procedure. 5. Please consult the following installation instruction pictures while installing and maintaining to avoid electric shock and fire accident.
ZNSHINE PV-LIGHTING CO., LTD.
#1 Zhixi Industry Zone,Jintan,Jiangsu,China Tel:+86-519-82445919 Fax:+86-519-82442068
